Search NASA⌕ Search

SEARCH · Search NASA

Results for “constraint reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Trim and Structural Optimization of Subsonic Transport Wings Using Nonconventional Aeroelastic Tailoring

Several minimum-mass aeroelastic optimization problems are solved to evaluate the effectiveness of a variety of novel tailoring schemes for subsonic transport wings. Aeroelastic strength and panel buckling constraints are imposed across a variety of trimmed maneuver loads. Tailoring with metallic thickness variations, functionally graded materials, composite laminates, tow steering, and distributed trailing edge control effectors are all found to provide reductions in structural wing mass with varying degrees of success. The question as to whether this wing mass reduction will offset the increased manufacturing cost is left unresolved for each case.

Stanford, Bret K.↗
NASA NTRSDate not supplied

Online Small-Sat Knowledge Repositories and Modeling Tools for Risk Reduction and Enhanced Mission Success

Developers of small satellites face the challenges of a short development schedule, incomplete information about parts from vendors, and limited budgets. The situation is complicated by the need to use commercial electronic parts rather than radiation hardened parts to meet performance and budget constraints. Fortunately, a number of organizations are standing up new modeling and data resources that are available for free online. Motivation for sharing models, part data, and lessons learned include shorter development times, increased mission success likelihood, and training the next generation of space professionals. The purpose of this paper is to make these resources and their complementary capabilities known to the small satellite community.

Small Satellites↗
NASA NTRS2011

TPSAS-NF1676L-12321-DND

The operation of some networks, such as air transportation networks, can be complicated by congestion through a small subset of nodes. The congestion may be influenced by the connectivity of the network, or by the presence of constraints restricting the flow through particular nodes. This work investigates the effects of both connectivity and node flow constraints on the operation of a network. We develop the Minimax Node Load Problem (MNLP), a multicommodity flow model which minimizes the worst-case flow through any node in a given input network. The optimal solution to this problem provides us with the minimax node load, which we propose as a measure of network congestion. Keeping the number of nodes fixed, we first increase connectivity in a series of networks, and observe that topologies with more distributed connections result in a reduction in the minimax node load. However, when connectivity is increased further, the reductions diminish and are accompanied by solutions with undesirable qualities such as longer commodity paths. We then perform a second set of experiments over the same network, constraining flow through different subsets of nodes at different magnitudes of flow restriction, finding that (1) more constrained nodes lead to the largest increases in minimax node load and (2) constraints on the most connected nodes have the greatest effect on both congestion and commodity path length.

Douglas W Lee↗
NASA NTRS2011

TPSAS-NF1676L-12264-DND

The operation of some networks, such as air transportation networks, can be complicated by congestion through a small subset of nodes. The congestion may be influenced by the connectivity of the network, or by the presence of constraints restricting the flow through particular nodes. This work investigates the effects of both connectivity and node flow constraints on the operation of a network. We develop the Minimax Node Load Problem (MNLP), a multicommodity flow model which minimizes the worst-case flow through any node in a given input network. The optimal solution to this problem provides us with the minimax node load, which we propose as a measure of network congestion. Keeping the number of nodes fixed, we first increase connectivity in a series of networks, and observe that topologies with more distributed connections result in a reduction in the minimax node load. However, when connectivity is increased further, the reductions diminish and are accompanied by solutions with undesirable qualities such as longer commodity paths. We then perform a second set of experiments over the same network, constraining flow through different subsets of nodes at different magnitudes of flow restriction, finding that (1) more constrained nodes lead to the largest increases in minimax node load and (2) constraints on the most connected nodes have the greatest effect on both congestion and commodity path length.

Douglas Lee↗
NASA NTRS1979

An economic analysis of a commercial approach to the design and fabrication of a space power system

A commercial approach to the design and fabrication of an economical space power system is presented. Cost reductions are projected through the conceptual design of a 2 kW space power system built with the capability for having serviceability. The approach to system costing that is used takes into account both the constraints of operation in space and commercial production engineering approaches. The cost of this power system reflects a variety of cost/benefit tradeoffs that would reduce system cost as a function of system reliability requirements, complexity, and the impact of rigid specifications. A breakdown of the system design, documentation, fabrication, and reliability and quality assurance cost estimates are detailed.

Putney, Z.↗
NASA NTRS1990

Aeroelastic optimization of a helicopter rotor using an efficient sensitivity analysis

To reduce oscillatory hub loads in forward flight, a structural optimization analysis of a hingeless helicopter rotor has been developed and applied. The aeroelastic analysis of the rotor is based on a finite element method in space and time, and linked with automated optimization algorithms. For the optimization analysis two types of structural representation are used: a generic stiffness-distribution and a single-cell thin-walled beam. For the first type, the design variables are nonstructural mass and its placement, chordwise center of gravity offset from the elastic axis, and stiffness. For the second type, width, height and thickness of spar are used as design variables. For the behavior constraints, frequency placement, autorotational inertia and aeroelastic stability of the blade are included. The required sensitivity derivatives are obtained using a direct analytical approach. An optimum oscillatory hub load shows a 25-77 percent reduction for the generic blade, and 30-50 percent reduction for the box-beam.

Lim, Joon W.↗
NASA NTRS1990

Design considerations for very long baseline fringe-tracking interferometers

Phase measurements made with the Mark III interferometer at Mt. Wilson using baselines up to 32 m show excellent agreement with the standard Kolmogorov theory, and give no evidence of an atmospheric outer scale smaller than 1 km. Thus, very long baseline interferometers (100's of m) can expect rms path length fluctuations to continue to grow nearly linearly with baseline length. With a wideband fringe tracker, atmospheric dispersion will cause significant reductions in fringe visibility for large instantaneous path length errors. A solution to this problem using an active dispersion tracker is presented. In addition, the problem of diffraction of the propagated beam, and the constraints it presents on the choice of beam diameter are discussed.

Colavita, M. Mark↗
NASA NTRS1999

Unshrouded Centrifugal Turbopump Impeller

The ratio of rocket engine thrust to weight is a limiting constraint in placing more payload into orbit at a low cost. A key component of an engine's overall weight is the turbopump weight, Reducing the turbopump weight can result in significant engine weight reduction and hence, increased delivered payload. There are two main types of pumps: centrifugal and axial pumps. These types of pumps can be further sub-divided into those with shrouds and those without shrouds (unshrouded pumps). Centrifugal pumps can achieve the same pump discharge pressure as an axial pump and it requires fewer pump stages and lower pump weight than an axial pump. Also, with unshrouded centrifugal pumps (impeller), the number of stages and weight can be further reduced. However. there are several issues with regard to using an unshrouded impeller: 1) there is a pump performance penalty due to the front open face recirculation flow; 2) there is a potential pump axial thrust problem from the unbalanced front open face and the back shroud face; and, 3) since test data is very linu'ted for this configuration, there is uncertainty in the magnitude and phase of the rotordynamics forces due to the front impeller passage. The purpose of the paper is to discuss the design of an unshrouded impeller and to examine the design's hydrodynamic performance, axial thrust, and rotordynamics performance. The design methodology will also be discussed. This work will help provide some guidelines for unshrouded impeller design. In particular, the paper will discuss the design of three unshrouded impellers - one with 5 full and 5 partial blades (5+5). one with 6+6 blades and one with 8+8 blades. One of these designs will be selected for actual fabrication and flow test. Computational fluid dynamics (CFD) is used to help design and optimize the unshrouded impeller. The relative pump performance penalty is assessed by comparing the CFD results of the unshrouded impeller with the equivalent shrouded impeller for a particular design. Limited unshrouded - versus - shrouded impeller data from the J-2 pump is used to anchor the CFD. Since no detailed impeller blade force data is available, axial thrust and rotordynamic force predictions are based on the CFD model. For the axial thrust, the impeller front flow passage axial force is integrated from the CFD results and compared to the equivalent shrouded impeller axial force. For the rotordynamics forces, the fluid reaction forces are computed from unsteady flow CFD results using a moving boundary method; the rotor- shaft is moved at several whirl-to-speed frequency ratios to extract the rotordynamics coefficients.

Prueger, George↗
NASA NTRS2001

Unshrouded Centrifugal Turbopump Impeller Design Methodology

Turbopump weight continues to be a dominant parameter in the trade space for reduction of engine weight. Space Shuttle Main Engine weight distribution indicates that the turbomachinery make up approximately 30% of the total engine weight. Weight reduction can be achieved through the reduction of envelope of the turbopump. Reduction in envelope relates to an increase in turbopump speed and an increase in impeller head coefficient. Speed can be increased until suction performance limits are achieved on the pump or due to alternate constraints the turbine or bearings limit speed. Once the speed of the turbopump is set the impeller tip speed sets the minimum head coefficient of the machine. To reduce impeller diameter the head coefficient must be increased. A significant limitation with increasing head coefficient is that the slope of the head-flow characteristic is affected and this can limit engine throttling range. Unshrouded impellers offer a design option for increased turbopump speed without increasing the impeller head coefficient. However, there are several issues with regard to using an unshrouded impeller: there is a pump performance penalty due to the front open face recirculation flow, there is a potential pump axial thrust problem from the unbalanced front open face and the back shroud face, and since test data is very limited for this configuration, there is uncertainty in the magnitude and phase of the rotordynamic forces due to the front impeller passage. The purpose of the paper is to discuss the design of an unshrouded impeller and to examine the hydrodynamic performance, axial thrust, and rotordynamic performance. The design methodology will also be discussed. This work will help provide some guidelines for unshrouded impeller design.

Prueger, George H.↗
NASA NTRS2015

Automatic Speech Acquisition and Recognition for Spacesuit Audio Systems

NASA has a widely recognized but unmet need for novel human-machine interface technologies that can facilitate communication during astronaut extravehicular activities (EVAs), when loud noises and strong reverberations inside spacesuits make communication challenging. WeVoice, Inc., has developed a multichannel signal-processing method for speech acquisition in noisy and reverberant environments that enables automatic speech recognition (ASR) technology inside spacesuits. The technology reduces noise by exploiting differences between the statistical nature of signals (i.e., speech) and noise that exists in the spatial and temporal domains. As a result, ASR accuracy can be improved to the level at which crewmembers will find the speech interface useful. System components and features include beam forming/multichannel noise reduction, single-channel noise reduction, speech feature extraction, feature transformation and normalization, feature compression, and ASR decoding. Arithmetic complexity models were developed and will help designers of real-time ASR systems select proper tasks when confronted with constraints in computational resources. In Phase I of the project, WeVoice validated the technology. The company further refined the technology in Phase II and developed a prototype for testing and use by suited astronauts.

Ye, Sherry↗
NASA NTRSDate not supplied

Transonic Cruise Slotted Wing Design for Commercial Transport Aircraft using CDISC

A knowledge-based aerodynamic design method, CDISC, has been extended to enable the computational design of transonic cruise slotted wings for commercial transport aircraft. The cruise slotted wing is a multielement wing concept with a forward main element and an aft flap element, separated to form an intermediate slot. This slot favorably redirects airflow from the main element lower surface toward the low-momentum, upper-surface boundary layer of the flap. Relative to the supercritical wing, the cruise slotted wing enables greater aft loading that helps to reduce shock strength and transonic pressure drag. The cruise slotted wing may be considered a passive drag-reduction technology with potential fuel burn savings and increased vehicle range for next-generation aircraft. The current paper seeks to quantify the drag-saving benefits of cruise slotted wing technology in application to single-aisle commercial transport aircraft. A series of multielement design constraints were developed within CDISC for the design of a partial-span, cruise slotted wing for a Mach-0.8 variant of the Common Research Model. To mitigate the skin-friction drag penalty associated with cruise slotted wings, the design features a flap with natural laminar flow over approximately 75% of the flap surface area. Cruise drag estimates from the NASA USM3D flow solver between a supercritical wing and the partial-span, cruise slotted wing design were within one drag count. Near-cruise, off-design analyses showed limited laminar flow sensitivity to angle of attack and a more gradual drag rise compared to a supercritical wing. Based on this demonstrated benefit, future work is motivated to design a cruise slotted wing with natural laminar flow on both wing elements to achieve a significant reduction in cruise drag while providing delayed drag divergence.

CDISC↗
NASA NTRS1967

Manned Venus Orbiting Mission

Manned orbiting stopover round trips to Venus are studied for departure dates between 1975 and 1986 over a range of trip times and stay times. The use of highly elliptic parking orbits at Venus leads to low initial weights in Earth orbit compared with circular orbits. For the elliptic parking orbit, the effect of constraints on the low altitude observation time on the initial weight is shown. The mission can be accomplished with the Apollo level of chemical propulsion, but advanced chemical or nuclear propulsion can give large weight reductions. The Venus orbiting mission weights than the corresponding Mars mission.

LAUNCH DATE↗
NASA NTRS1975

Continuing inflation leading to erosion of purchasing power, unemployment and constraint of capital availability

The persistence of the current period of inflation and its apparent resistance to traditional fiscal and monetary policies implies a circular behavior that becomes increasingly impervious to ameliorative action. This behavior is attributed to: A concurrent industrial boom among industrialized nations; price and production policies; worldwide reductions in agricultural products; international shortages of natural resources and raw materials; and rise in multinational firms and merchant banking.

Source record↗
NASA NTRS1979

An economic analysis of a commercial approach to the design and fabrication of a space power system

This paper discusses a commercial approach to the design and fabrication of an economical space power system. With the advent of the space shuttle, steps can be taken to back away from the presently used space qualified approach in order to reduce cost of space hardware by incorporating, where possible, commercial design, fabrication, and quality assurance methods. Cost reductions are projected through the conceptual design of a 2 kW space power system built with the capability for having serviceability. The approach to system costing that has been used takes into account both the constraints of operation in space and commercial production engineering approaches. The cost of this power system reflects a variety of cost/benefit tradeoffs that would reduce system cost as a function of system reliability requirements, complexity, and the impact of rigid specifications. A breakdown of the system design, documentation, fabrication and reliability and quality assurance cost estimates are detailed.

Putney, Z.↗
NASA NTRS1989

Dynamic analysis of the Space Station truss structure based on a continuum representation

A mathematical model is developed for the real-time simulation of a Space Station. First, a continuum equivalent representation of the Space Station truss structure is presented which accounts for extensional, transverse, and shear deformations and coupling between them. The procedure achieves a significant reduction in the degrees of freedom of the system. Dynamic equations are then formulated for the continuum equivalent of the Space Station truss structure based on the matrix version of Kane's dynamical equations. Finally, constraint equations are derived for the dynamic analysis of flexible bodies with closed loop configuration.

Thomas, Segun↗
NASA NTRSDate not supplied

Transonic Cruise Slotted Wing Design for Commercial Transport Aircraft using CDISC

A knowledge-based aerodynamic design method, CDISC, has been extended to enable the computational design of transonic cruise slotted wings for commercial transport aircraft. The cruise slotted wing is a multielement wing concept with a forward main element and an aft flap element, separated to form an intermediate slot. This slot favorably redirects airflow from the main element lower surface toward the low-momentum, upper-surface boundary layer of the flap. Relative to the supercritical wing, the cruise slotted wing enables greater aft loading that helps to reduce shock strength and transonic pressure drag. The cruise slotted wing may be considered a passive drag reduction technology with potential fuel-burn savings and increased vehicle range for next-generation aircraft. The current paper seeks to quantify the drag-saving benefits of cruise slotted wing technology in application to single-aisle commercial transport aircraft. A series of multielement design constraints were developed within CDISC for the design of a partial-span, cruise slotted wing for a Mach-0.8 variant of the Common Research Model. To mitigate the skin-friction drag penalty associated with cruise slotted wings, the design features a flap with natural laminar flow over approximately 75% of the flap surface area. Cruise drag estimates from the NASA USM3D-ME flow solver between a supercritical wing and the partial-span, cruise slotted wing design were within one drag count. Near-cruise, off-design analyses showed limited laminar-flow sensitivity to angle of attack and a more gradual drag rise compared to a supercritical wing. Based on this observed benefit, future work is motivated to design a cruise slotted wing with laminar flow on both wing elements to achieve a significant reduction in cruise drag while delaying drag divergence.

CDISC↗
NASA NTRS1984

Energy Efficient Engine exhaust mixer model technology report addendum; phase 3 test program

The Phase 3 exhaust mixer test program was conducted to explore the trends established during previous Phases 1 and 2. Combinations of mixer design parameters were tested. Phase 3 testing showed that the best performance achievable within tailpipe length and diameter constraints is 2.55 percent better than an optimized separate flow base line. A reduced penetration design achieved about the same overall performance level at a substantially lower level of excess pressure loss but with a small reduction in mixing. To improve reliability of the data, the hot and cold flow thrust coefficient analysis used in Phases 1 and 2 was augmented by calculating percent mixing from traverse data. Relative change in percent mixing between configurations was determined from thrust and flow coefficient increments. The calculation procedure developed was found to be a useful tool in assessing mixer performance. Detailed flow field data were obtained to facilitate calibration of computer codes.

Larkin, M. J.↗
NASA NTRS2015

Aeroelastic Tailoring of Transport Wings Including Transonic Flutter Constraints

Several minimum-mass optimization problems are solved to evaluate the effectiveness of a variety of novel tailoring schemes for subsonic transport wings. Aeroelastic stress and panel buckling constraints are imposed across several trimmed static maneuver loads, in addition to a transonic flutter margin constraint, captured with aerodynamic influence coefficient-based tools. Tailoring with metallic thickness variations, functionally graded materials, balanced or unbalanced composite laminates, curvilinear tow steering, and distributed trailing edge control effectors are all found to provide reductions in structural wing mass with varying degrees of success. The question as to whether this wing mass reduction will offset the increased manufacturing cost is left unresolved for each case.

Stanford, Bret K.↗