SEARCH · Search NASA

Results for “continental”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Intraplate deformation due to continental collisions: A numerical study of deformation in a thin viscous sheet

A model of crustal deformation from continental collision that involves the penetration of a rigid punch into a deformable sheet is investigated. A linear viscous flow law is used to compute the magnitude and rate of change of crustal thickness, the velocity of mass points, strain rates and their principal axes, modes of deformation, areal changes, and stress. In general, a free lateral boundary reduces the magnitude of changes in crustal thickening by allowing material to more readily escape the advancing punch. The shearing that occurs diagonally in front of the punch terminates in compression or extension depending on whether the lateral boundary is fixed or free. When the ratio of the diameter of the punch to that of the sheet exceeds one-third, the deformation is insenstive to the choice of lateral boundary conditions. When the punch is rigid with sharply defined edges, deformation is concentrated near the punch corners. With non-rigid punches, shearing results in deformation being concentrated near the center of the punch. Variations with respect to linearity and nonlinearity of flow are discussed.

Cohen, S. C.↗

NASA NTRS1985

Continental sources of halocarbons and nitrous oxide

Estimates of continental sources of CFC-11, CFC-12, CCl4, CH3CCl3 and N2O are derived from the atmospheric lifetime experiment in Adrigole, Ireland, and anthropogenic emissions of CCl4 and N2O from Europe have been identified. Relative source strengths are consistent with global budgets for the halocarbons and N2O. Different industrial release patterns for halocarbons are observed for Europe, the western United States and Australia.

Prather, M. J.↗

NASA NTRS1986

Extension of continental lithosphere - A model for two scales of basin and range deformation

The development of a model for deformation in an extending continental lithosphere that is stratified in density and strength is described. The lithosphere model demonstrates that the necking instabilities at two wavelengths originate due to a strong upper crust, a mantle layer, and a weak lower crust. It is observed that the dominant wavelengths of necking are controlled by layer thickness and the strength of the layers control the amplitude of the instabilities. The model is applied to the Basin and Range Province of the western U.S. where deformations in ranges and tile domains are detected. The relation between the Bouguer gravity anomaly and the deformations is studied. The data reveal that the horizontal scale of short wavelength necking correlates with the spacings of individual basins and ranges, and the longer wavelength corresponds to the width of tilt domains. The control of the Basin and Range deformation by two scales of extensional instability is proposed.

Zuber, M. T.↗

NASA NTRS1987

Crew coordination concepts: Continental Airlines CRM training

The outline of the crew coordination concepts at Continental airlines is: (1) Present relevant theory: Contained in a pre-work package and in lecture/discussion form during the work course, (2) Discuss case examples: Contained in the pre-work for study and use during the course; and (3) Simulate practice problems: Introduced during the course as the beginning of an ongoing process. These concepts which are designed to address the problem pilots have in understanding the interaction between situations and their own theories of practice are briefly discussed.

Christian, Darryl↗

NASA NTRS1988

Effects of a temperature-dependent rheology on large scale continental extension

The effects of a temperature-dependent rheology on large-scale continental extension are investigated using a thin viscous sheet model. A vertically-averaged rheology is used that is consistent with laboratory experiments on power-law creep of olivine and that depends exponentially on temperature. Results of the calculations depend principally on two parameters: the Peclet number, which describes the relative rates of advection and diffusion of heat, and a dimensionless activation energy, which controls the temperature dependence of the rheology. At short times following the beginning of extension, deformation occurs with negligible change in temperature, so that only small changes in lithospheric strength occur due to attenuation of the lithosphere. However, after a certain critical time interval, thermal diffusion lowers temperatures in the lithosphere, strongly increasing lithospheric strength and slowing the rate of extension. This critical time depends principally on the Peclet number and is short compared with the thermal time constant of the lithosphere. The strength changes cause the locus of high extensional strain rates to shift with time from regions of high strain to regions of low strain. Results of the calculations are compared with observations from the Aegean, where maximum extensional strains are found in the south, near Crete, but maximum present-day strain rates are largest about 300 km further north.

Sonder, Leslie J.↗

NASA NTRS1988

Workshop on the Growth of Continental Crust

Constraints and observations were discussed on a fundamental unsolved problem of global scale relating to the growth of planetary crusts. All of the terrestrial planets were considered, but emphasis was placed on the Earth's continental crust. The title of each session is: (1) Extraterrestrial crustal growth and destruction; (2) Constraints for observations and measurements of terrestrial rocks; (3) Models of crustal growth and destruction; and (4) Process of crustal growth and destruction.

Ashwal, Lewis D.↗

NASA NTRS1988

Construction of mass-age curves for the continental crust: An empirical model and an example from the western US

The methodology of determining crustal mass-age curves is discussed. Problems in doing this include determination of model ages and accounting for mixing of materials of different ages during crust forming processes. These difficulties can be overcome with some reasonable assumptions and estimates of rock volumes based on areal proportions. This technique was used to construct a reasonably well constrained mass-age curve for the southwestern U.S. based on isotopic measurements on over 100 samples. The results imply that the crust in this area grew episodically at 2.8, 1.8, and 0.1 Ga. It is estimated that it would take on the order of 10000 to 100000 individual Sm-Nd isotopic measurements to carry out a similar exercise for continental crust world wide.

Depaolo, D. J.↗

NASA NTRS1988

Does subduction zone magmatism produce average continental crust

The question of whether present day subduction zone magmatism produces material of average continental crust composition, which perhaps most would agree is andesitic, is addressed. It was argued that modern andesitic to dacitic rocks in Andean-type settings are produced by plagioclase fractionation of mantle derived basalts, leaving a complementary residue with low Rb/Sr and a positive Eu anomaly. This residue must be removed, for example by delamination, if the average crust produced in these settings is andesitic. The author argued against this, pointing out the absence of evidence for such a signature in the mantle. Either the average crust is not andesitic, a conclusion the author was not entirely comfortable with, or other crust forming processes must be sought. One possibility is that during the Archean, direct slab melting of basaltic or eclogitic oceanic crust produced felsic melts, which together with about 65 percent mafic material, yielded an average crust of andesitic composition.

Ellam, R. M.↗

NASA NTRS1988

Deep seismic reflection profiling and continental growth curves

The results of deep seismic reflection profiling is discussed which shows that the lower crust is prominently layered, in many continental areas, regardless of the age of the surface rocks. The seismic Moho is commonly shallower than the petrological Moho, leading to the question of the nature and origin of this prominent reflector in the deep crust. The lower crust is much less well defined in Phanerozoic and Proterozoic accreted terranes, suggesting possible differences in types of lower crusts.

Klemperer, Simon L.↗

NASA NTRS1988

Growth of the lower continental crust

One of the largest uncertainties in crustal composition and growth models is the nature of the lower continental crust. Specifically, by what processes is it formed and modified, and when is it formed, particularly in reference to the upper crust? The main reason for this lack of information is the scarcity of lower crustal rock samples. These are restricted to two types: rocks which outcrop in granulite facies terrains and granulite facies xenoliths which are transported to the earth's surface by young volcanics. The important conclusions arising from the xenolith studies are: the majority of mafic lower crustal xenoliths formed through cumulate process, resitic xenoliths are rare; and formation and metamorphism of the deep crust is intimately linked to igneous activity and/or orogeny which are manifest in one form or another at the earth's surface. Therefore, estimates of crustal growth based on surface exposures is representative, although the proportion of remobilized pre-existing crust may be significantly greater at the surface than in the deep crust.

Rudnick, Roberta L.↗

NASA NTRS1988

Continental crustal formation and recycling: Evidence from oceanic basalts

Despite the wealth of geochemical data for subduction-related magma types, and the clear importance of such magmas in the creation of continental crust, there is still no concensus about the relative magnitudes of crustal creation versus crustal destruction (i.e., recycling of crust into the mantle). The role of subducted sediment in the formation of the arc magmas is now well documented; but what proportion of sediment is taken into the deeper mantle? Integrated isotopic and trace element studies of magmas erupted far from presently active subduction zones, in particular basaltic rocks erupted in the ocean basins, are providing important information about the role of crustal recycling. By identifying potential chemical tracers, it is impossible to monitor the effects of crustal recycling, and produce models predicting the mass of material recycled into the mantle throughout long periods of geological time.

Saunders, A. D.↗

NASA NTRS1988

Physical processes in the growth of the continental crust

Major mechanisms of crustal addition are volcanism and plutonism at plate boundaries and within plate interiors. One approach to deciding if island arc magmatism dominated ancient crustal growth is to assess the rate at which the process has operated in the recent past. The localized addition rates were found to be comparable to present day global rates. One physical observable that was used to constrain models of crustal growth is sea level. A simple physical model was developed to explore the consequences of constant freeboard (the height of the continents above sea level). Global geoid and sea floor topography data were used to identify and study oceanic plateaus and swells that have either continental crustal roots or anomalously thick ocean crusts.

Schubert, G.↗

NASA NTRS1988

Flexural behavior of the continental lithosphere in Italy - Constraints imposed by gravity and deflection data

This paper presents a simple model that describes the geometry of subducted continental lithosphere as the result of flexural loading of a thin elastic sheet. The method involves a procedure for systematically matching the plate flexure and gravity data to the best-fitting two-dimensional flexural geometry obtained by a thin elastic sheet of specified elastic strength. It is shown that the model can explain both the deflection of the lithosphere and the gravity anomalies observed along four profiles across the Apennine convergent system in Italy. The results of calculations suggest that in subduction systems, like the Apennines, that are characterized by backarc extension, forces acting on subducted lithosphere at depth can be expressed at the surface in the geometry of the foredeep basin that forms adjacent to the subduction zone.

Royden, Leigh↗

NASA NTRS1988

Continental scale variability in vegetation reflectance and its relationship to canopy morphology

The spectral canopy reflectance, biomass, and projected leaf-area index (LAI) of widely dispersed plots of a North American coastal plant were measured in order to study potential impacts of continental-scale environmental variability on the assumptions underlying remote vegetation analysis. Systematic changes in the canopy geometry and resultant near-infrared reflectance of this plant were noted. Mean infrared canopy reflectances of canopies in the northern half of the range were shown to nearly double those of the southern half. It is suggested that the difference results from divergent canopy morphologies, with the northern canopies presenting greater horizontally projected LAIs per unit biomass than southern canopies.

Bartlett, D. S.↗

NASA NTRS1988

K-T impact(s): Continental, oceanic or both

Although geochemical and mineralogical evidence indicate that a major accretionary event occurred at the K-T boundary, no impact crater of suitable size and age was recognized. The 35 km Manson Structure, Iowa, was suggested recently as a possibility and Ar-40/Ar-39 determinations indicate that its formation age is indistinguishable from that of the K-T boundary. In order to test a possible association between Manson and the K-T boundary clay, the geochemistry and mineralogy of the K-T boundary clays at the Scollard Canyon section, Alberta and the Starkville South section, Colorado are compared with three dominant lithologies affected by the Manson impact: Proterozoic red clastics, underlying late-state granites, and gneisses. The chemical and mineralogical makeup of the Scollard Canyon boundary clay and its clastic constituents are presented, commenting on the implications for impact models. An impact into crystalline material of continental affinity appears to be required to explain the mineralogy and chemistry of the Scollard Canyon (and other Western N. American K-T sections). The low REE abundances of some K-T boundary layers are unusual but perhaps attempts should be made to understand the contributions of individual crustal components (e.g., carbonates, arkoses) as well as the potential for alteration involving these and other elements during and after impact-induced vaporization, before mantle excavation is invoked. If further studies confirm the results of published studies of marine boundary clays that indicate an oceanic target, attention must be paid to the possibility that multiple impacts occurred at the K-T boundary - one or more on the continents and one or more in the ocean.

Sharpton, V. L.↗

NASA NTRS1988

How widely is the Andean type of continental margin represented in the Archean

Application of the principle of uniformitarianism to the Archean was discussed in a search for evidence of Archean-type continental margins in Archean rocks. The author cautioned that Archean rocks represent only 2 percent of the current exposure of the continents, half of which is in the North American Superior Province. Care must be taken in interpreting the global tectonic significance of relatively small exposures of Archean rocks, such as South India. Andean margins were characterized by their elongate shape, magmatic associations, and isotopic signatures. Although the compositional evidence alone will always be ambiguous, it was suggested that supporting structural evidence may aid in the identification of Archean Andean margins. Andean margin remains have been recognized in the Superior Province of Canada by these criteria, and the author suggested that the Closepet granite of South India may represent another example.

Burke, Kevin↗

NASA NTRS1989

Effects of a temperature-dependent rheology on large-scale continental extension

Sonder, Leslie J.↗

NASA NTRS1989

Factors governing the total rainfall yield from continental convective clouds

Several important factors that govern the total rainfall from continental convective clouds were investigated by tracking thousands of convective cells in Israel and South Africa. The rainfall volume yield (Rvol) of the individual cells that build convective rain systems has been shown to depend mainly on the cloud-top height. There is, however, considerable variability in this relationship. The following factors that influence the Rvol were parameterized and quantitatively analyzed: (1) cloud base temperature, (2)atmospheric instability, and (3) the extent of isolation of the cell. It is also shown that a strong low level forcing increases the duration of Rvol of clouds reaching the same vertical extent.

Rosenfeld, Daniel↗