Search NASA⌕ Search

SEARCH · Search NASA

Results for “control of networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A unified acquisition system for acoustic data

A multichannel, acoustic AM carrier system was developed for a wide variety of applications, particularly for aircraft noise and sonic boom measurements. Each data acquisition channel consists of a condenser microphone, an acoustic signal converter, and a Zero Drive amplifier, along with peripheral supporting equipment. A control network insures continuous optimal tuning of the converter and permits remote calibration of the condenser microphone. With a 12.70-mm (1/2-in.) condenser microphone, the converter/Zero Drive amplifier combination has a frequency response from 0 Hz to 20 kHz (-3 db), a dynamic range exceeding 70 db, and a minimum noise floor of 50 db ref. 20 micro Pa) in the band 22.4 Hz to 22.4 kHz. The system requires no external impedance matching networks and is insensitive to cable length, at least up to 900 m (3,000 ft). System gain varies only + or - 1 db over the temperature range 4 to 54 C (40 to 130 F). Adapters are available to accommodate 23.77-mm (1-in.) and 6.35-mm (1/4-in.) microphones and to provide 30-db attenuation. A field test to obtain the acoustical time history of a helicopter flyover proved successful.

Zuckerwar, A. J.↗

Range validation using Kalman filter techniques

Range pseudo-residuals may be improved to the level required for data validation by a measurement updating process which utilizes Bierman's adaptation of the Kalman filter measurement updating algorithms together with process noise compensation to account for model errors. This algorithm involves combining the currently available range predictions and measurements to produce an updated range residual measurement whose accuracy is constrained by the range data quality and by the estimated error in the prediction. The algorithm is compact and fast, and is thus suitable for on-line applications in network control or at the station.

Madrid, G. A.↗

NASA PERT time II

Program Evaulation and Review Technique (PERT) is disciplined management technique involving computer processing. NASA PERT Time 11 gives project manager insight into current and future project development and forewarns of potential problems. Program utilizes modular technique. Module is "fragnet"; once aspects of project are described in terms of fragnets, control network is automatically generated. Program is written in FORTRAN IV and OS Assembler for batch execution and has been implemented on IBM 370.

Bainbridge, R. C.↗

Dynamic profile of a prototype pivoted proof-mass actuator

A prototype of a linear inertial reaction actuation (damper) device employing a flexure-pivoted reaction (proof) mass is discussed. The mass is driven by an electromechanic motor using a dc electromagnetic field and an ac electromagnetic drive. During the damping process, the actuator dissipates structural kinetic energy as heat through electromagnetic damping. A model of the inertial, stiffness and damping properties is presented along with the characteristic differential equations describing the coupled response of the actuator and structure. The equations, employing the dynamic coefficients, are oriented in the form of a feedback control network in which distributed sensors are used to dictate actuator response leading to a specified amount of structural excitation or damping.

Miller, D. W.↗

Landsat hydrobiological classification for an inland fresh water marsh within Everglades National Park

The considered investigation is concerned with the application of Landsat Multispectral Scanner (MSS) data to the classification of vegetative communities and the establishment of flow vectors for the Shark River Slough in Everglades National Park, Florida. A systematic array of 'ground truth' was established utilizing comprehensive hydrologic field data and conventional high altitude infrared aerial photography. A control network was defined that represented all hydrobiological zones (those wetland vegetative communities that directly influence the rate of overland sheet flow) in the Shark River Slough. These data were then directly applied to the Landsat imagery utilizing an interactive multispectral processor which generated hydrographic maps of the slough and defined the surface radiance characteristics of each hydrobiological system. It was found that the application of Landsat imagery for hydrologic applications in a wetlands area, such as the Shark River Slough in Everglades National Park, is definitely a viable tool for resource management.

Rose, P. W.↗

Defense Meteorological Satellite Program (DMSP)

The Defense Meteorological Satellite Program is a total satellite system composed of spacecraft with meteorological sensors, an Earth-based command and control network, user stations, launch vehicle and support; with a communication network linking the various segments together. The various system segments are described.

Rivers, J. W., Jr.↗

An application of LANDSAT multispectral imagery for the classification of hydrobiological systems, Shark River Slough, Everglades National Park, Florida

Multivariant hydrologic parameters over the Shark River Slough were investigated. Ground truth was established utilizing U-2 infrared photography and comprehensive field data to define a control network which represented all hydrobiological systems in the slough. These data were then applied to LANDSAT imagery utilizing an interactive multispectral processor which generated hydrographic maps through classification of the slough and defined the multispectral surface radiance characteristics of the wetlands areas in the park. The spectral response of each hydrobiological zone was determined and plotted to formulate multispectral relationships between the emittent energy from the slough in order to determine the best possible multispectral wavelength combinations to enhance classification results. The extent of each hydrobiological zone in slough was determined and flow vectors for water movement throughout the slough established.

Rose, P. W.↗

Satellite switched FDMA advanced communication technology satellite program

The satellite switched frequency division multiple access system provided a detailed system architecture that supports a point to point communication system for long haul voice, video and data traffic between small Earth terminals at Ka band frequencies at 30/20 GHz. A detailed system design is presented for the space segment, small terminal/trunking segment at network control segment for domestic traffic model A or B, each totaling 3.8 Gb/s of small terminal traffic and 6.2 Gb/s trunk traffic. The small terminal traffic (3.8 Gb/s) is emphasized, for the satellite router portion of the system design, which is a composite of thousands of Earth stations with digital traffic ranging from a single 32 Kb/s CVSD voice channel to thousands of channels containing voice, video and data with a data rate as high as 33 Mb/s. The system design concept presented, effectively optimizes a unique frequency and channelization plan for both traffic models A and B with minimum reorganization of the satellite payload transponder subsystem hardware design. The unique zoning concept allows multiple beam antennas while maximizing multiple carrier frequency reuse. Detailed hardware design estimates for an FDMA router (part of the satellite transponder subsystem) indicate a weight and dc power budget of 353 lbs, 195 watts for traffic model A and 498 lbs, 244 watts for traffic model B.

Atwood, S.↗

Packet communication system for a multi-beam beam switched satellite repeater

This paper presents the design of a packet-switched communication system using a multi-beam, beam switched satellite repeater. The protocol provides a combination of random access via Slotted ALOHA techniques and demand assigned access using collision requests. This allows efficient bandwidth usage and low average delays. Minimization of earth station cost was a major objective. This was achieved by transferring the bulk of the system complexity to the satellite repeater and the (ground) network controller. This centrally controlled protocol would allow greater system stability and would permit system reconfiguration in response to changes in traffic intensity. Sufficient signalling is also incorporated to allow both rate diversity to combat fading and timing corrections to account for satellite drift.

Bose, S. K.↗

An application of distributed processing - In the TDRSS ground communication fault isolation and monitoring system

A computer interface has been designed for the Fault Isolation and Monitoring System, a system providing qualitative and quantitative assessment of the communications between the Tracking and Data Relay Satellite System Ground Segment and NASA's Network Control Center. The functional requirements for the interface and the design philosophy are discussed, as are the methods and protocol used to implement the operator support software required to configure the monitoring system and to display and report the results of the analysis. The system relies on the use of intelligent terminals, with the human interface removed from the host computer.

Waddell, R. L., Jr.↗

GSFC network operations with Tracking and Data Relay Satellites

The Tracking and Data Relay Satellite System (TDRSS) Network (TN) has been developed to provide services to all NASA User spacecraft in near-earth orbits. Three inter-relating entities will provide these services. The TN has been transformed from a network continuously changing to meet User specific requirements to a network which is flexible to meet future needs without significant changes in operational concepts. Attention is given to the evolution of the TN network, the TN capabilities-space segment, forward link services, tracking services, return link services, the three basic capabilities, single access services, multiple access services, simulation services, the White Sands Ground Terminal, the NASA communications network, and the network control center.

Spearing, R.↗

Network ST radar and related measurements at Pennsylvania State University

Mesoscale meteorological measurements, analysis and prediction are some of the principal areas of research in the Department of Meteorology at Penn State. In anticipation of a staged turn-on of the three systems during the Summer and Fall of 1984, the nonconstruction-related efforts have focused on the software development necessary to allow essentially immediate use of network data. A 16-bit microcomputer has been programmed to serve as the network controller, communications interface and, at least for real-time purposes, the operational display system. Insofar as possible we have in this task built upon our substantial accumulated experience in working with the processing and display of Doppler sodar system signals. Once the radar-derived wind and turbulence profiles are communicated to the various interconnected Departmental computers they become just one component of a comprehensive data base which can be applied to a diverse set of ongoing basic and operational research programs.

Thomson, D. W.↗

State of the art survey of network operating systems development

The results of the State-of-the-Art Survey of Network Operating Systems (NOS) performed for Goddard Space Flight Center are presented. NOS functional characteristics are presented in terms of user communication data migration, job migration, network control, and common functional categories. Products (current or future) as well as research and prototyping efforts are summarized. The NOS products which are revelant to the space station and its activities are evaluated.

Source record↗

Satellite battery testing status

Because of the large numbers of satellite cells currently being tested and anticipated at the Naval Weapons Support Center (NAVWPNSUPPCEN) Crane, Indiana, satellite cell testing is being integrated into the Battery Test Automation Project (BTAP). The BTAP, designed to meet the growing needs for battery testing at the NAVWPNSUPPCEN Crane, will consist of several Automated Test Stations (ATSs) which monitor batteries under test. Each ATS will interface with an Automation Network Controller (ANC) which will collect test data for reduction.

Haag, R.↗

Halley's comet exploration and the Japanese Usuda large antenna

An overview of the Japanese PLANET-A project to investigate Halley's Comet is given. The objectives and scientific challenges involved in the project are given, and the nature of the contribution made by the large antenna array located at Usuda-Cho, Nagano Prefecture, Japan is discussed. The structural design of the MS-T5 and PLANET-A probes are given, as well as the tracking and control network for the probes. The construction, design, operating system and site selection for the Usuda antenna station are discussed.

Nomura, T.↗

Ada technology support for NASA-GSFC

Utilization of the Ada programming language and environments to perform directorate functions was reviewed. The Mission and Data Operations Directorate Network (MNET) conversion effort was chosen as the first task for evaluation and assistance. The MNET project required the rewriting of the existing Network Control Program (NCP) in the Ada programming language. The DEC Ada compiler running on the VAX under WMS was used for the initial development efforts. Stress tests on the newly delivered version of the DEC Ada compiler were performed. The new Alsys Ada compiler was purchased for the IBM PC AT. A prevalidated version of the compiler was obtained. The compiler was then validated.

Source record↗

ACTS experiments program

NASA's Advanced Communications Technology Satellite which will flight test the advanced technologies associated with a Ka-band multibeam antenna, onboard signal processing and switching, and laser communications is described. The ACTS Experiment Program includes flight system technology experiments, ground system technology experiments, network control, propagation experiments, and end-to-end system experiments. Operational communications modes employing the baseband processor and microwave switch matrix are presented as well as the antenna coverage pattern.

Schertler, Ronald J.↗

Development of the network architecture of the Canadian MSAT system

A description is given of the present concept for the Canadian Mobile Satellite (MSAT) System and the development of the network architecture which will accommodate the planned family of three categories of service: a mobile radio service (MRS), a mobile telephone service (MTS), and a mobile data service (MDS). The MSAT satellite will have cross-strapped L-band and Ku-band transponders to provide communications services between L-band mobile terminals and fixed base stations supporting dispatcher-type MRS, gateway stations supporting MTS interconnections to the public telephone network, data hub stations supporting the MDS, and the network control center. The currently perceived centralized architecture with demand assignment multiple access for the circuit switched MRS, MTS and permanently assigned channels for the packet switched MDS is discussed.

Davies, N. George↗