Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Defect Engineering of Bi 2 SeO 2 Thermoelectrics

Abstract Bi 2 SeO 2 is a promising n ‐type semiconductor to pair with p ‐type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self‐doped n ‐type Bi 2 SeO 2 span several orders of magnitude, even in samples with the same nominal compositions. Such unsystematic variations in the electron concentration have a thermodynamic origin related to the variations in native defect concentrations. In this study, first‐principles calculations are used to show that the selenium vacancy, which is the source of n ‐type conductivity in Bi 2 SeO 2 , varies by 1–2 orders of magnitude depending on the thermodynamic conditions. It is predicted that the electron concentration can be enhanced by synthesizing under more Se‐poor conditions and/or at higher solid‐state reaction temperatures ( T SSR ), which promote the formation of selenium vacancies without introducing extrinsic dopants. The computational predictions are validated through solid‐state synthesis of Bi 2 SeO 2 . More than two orders of magnitude increase are observed in the electron concentration simply by adjusting the synthesis conditions. Additionally, a significant effect of grain boundary scattering on the electron mobility in Bi 2 SeO 2 is revealed, which can also be controlled by adjusting T SSR . By simultaneously optimizing the electron concentration and mobility, a zT of ≈0.2 is achieved at 773 K for self‐doped n ‐type Bi 2 SeO 2 . The study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.

Novitskii, Andrei [MANA, National Institute for Ma↗
DOE OSTI2025

Electronic Structure of the Au Nanoparticle-TiO 2 Heterojunction: Influence of Nanoparticle Size, Shape, Oxygen Vacancies, and Temperature

The electronic structure of the gold nanoparticle-titanium dioxide (AuNP-TiO 2 ) heterojunction plays a critical role for charge transfer and recombination dynamics that underpin its photocatalytic function. However, building a representative model to capture the key physics remains a significant challenge. Here, we investigate the influence of the AuNP size and shape, as well as oxygen vacancy (V O ) defects at the anatase-phase TiO 2 (101) surface and the temperature of the heterojunction, on its interfacial electronic properties. Using density functional theory (DFT), we compare the closed-shell Au 20 and open-shell Au 19 clusters interfaced with pristine and V O defect TiO 2 surfaces. We find that the presence of a V O defect transforms pure TiO 2 from a p-type to an n-type semiconductor, reversing the interfacial band bending from downward to upward. For the heterosystem, density of states (DOS) analysis shows that V O minimally affects the open-shell Au 19 -TiO 2 system, but it significantly alters the closed-shell Au 20 -TiO 2 system, converting it from p-type to n-type at the Γ-point at 0 K. Furthermore, ab initio molecular dynamics (AIMD) simulations at 300 K reveal significant thermal fluctuations in AuNP positions relative to the TiO 2 surface. These fluctuations result in dynamic variations in the gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in all systems studied: Au 19 NP-Pristine TiO 2 , Au 20 NP-Pristine TiO 2 , Au 19 NP-V O defect TiO 2 , and Au 20 NP-V O defect TiO 2 . Complementary Bader charge analysis performed at both 0 K and finite-temperature AIMD snapshots supports the emergence of an upward band bending and the formation of a Schottky barrier at the V O containing heterojunctions. Notably, we find that at finite temperature, an Au atom can dynamically passivate the V O , leading to a pronounced widening of the HOMO-LUMO gap in the AuNP-V O defect TiO 2 heterojunctions. Our computational findings underscore the pivotal role of the V O defect and thermal effects in modulating interfacial band alignment, electronic states, and HOMO-LUMO gaps, providing insights for designing Au-TiO 2 heterojunctions with tailored electronic properties.

Mora Perez, Carlos [Lawrence Berkeley National Lab↗
DOE OSTI2024

Electrically-driven IMT and volatile memristor behavior in NdNiO 3 films

Abstract Transition metal oxides with insulator-metal transitions (IMTs) are uniquely suited for volatile memristor devices that mimic the spiking of biological neurons. Unlike most non-volatile memristors, which often operate via ion migration into filaments, volatile devices utilize a reversible phase change that returns to a ground state in the absence of applied stimulus. In these devices, Joule heating triggers the IMT and changes the bulk resistivity rather than influencing conduction through defects, as in previous studies. This volatile resistive switching behavior has previous been leveraged in niobium and vanadium oxides, but not in rare-earth nickelates, despite their tunable transition temperatures. This study demonstrates an electrically driven IMT in the prototypical rare-earth nickelate, NdNiO 3 , in large area devices. While previous work examining the electrically-driven IMT in NdNiO 3 suggests defect-dominated conduction, this study shows clear s-type negative differential resistance (NDR) consistent with temperature-dependent resistivity measurements. The NDR peak-to-valley voltage scales linearly with temperature as expected for conductivity pathways dominated by bulk IMT behavior. Unlike other transition metal oxides, which are modeled using the insulator-metal phase fraction as the internal state variable, a thermoelectric model with temperature as the internal state variable is found to more accurately describe the current–voltage characteristic of NdNiO 3 volatile memristors. Overall, we report the synthesis, fabrication, and characterization of NdNiO 3 volatile memristors with resistivity dominated by bulk-like IMT behavior which is scalable and not dependent upon oxygen vacancy migration or defect mediated conduction pathways.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Surface defects and chemistry on the SnO2(110) surface

A variety of ultrahigh vacuum (UHV) surface science techniques have been used to characterize the structural, electronic and chemical properties of SnO2(110), a model catalytic surface. Two types of surface oxygen vacancies have been identified, each associated with different band gap (defect) electronic states. Adsorption experiments show that the interaction of simple gases with this surface occurs primarily through these oxygen vacancies and can show site-specificity to only one of the two types of vacancies.

Cox, David F.↗
NASA NTRS1992

Simulation studies for surfaces and materials strength

The progress report for the period May 1, 1992 to October 31, 1992 is presented. During this period investigations were carried out in three areas. Binding energies and high energy binding sites were calculated for carbon atoms deposited on a (2 x 1) dimerized Si(100) surface. Structure- and energy-related properties of defects formed on relaxed diamond surfaces were investigated. Tersoff-type model functions for Si were employed to investigate the energetics of the following processes: (1) neutral monovacancy and divacancy formation and migration energies; (2) neutral bond-centered, site sharing, tetrahedral, and hexagonal self-interstitial formation and migration energies; and (3) the variation of these energies with distance from a bulk site of Frenkel defect formation and from (100) and (111) surfaces. Calculations are included in the appendices.

Halicioglu, Timur↗
DOE OSTI2024

Point defects and doping in wurtzite LaN

Wurtzite LaN (wz-LaN) is a semiconducting nitride that has piezoelectric and ferroelectric properties, making it promising for applications in electronics, either as a binary compound or in alloys such as LaAlN. The prospects for wz-LaN in devices are influenced by the properties of point defects and impurities; here, we use first-principles density functional theory with a hybrid functional to calculate their formation energies, as well as their atomic and electronic structures. Among native point defects, we find that nitrogen-related defects, both vacancies ($V^+_N$) and interstitials ($N^-_i$), are energetically most favorable under most relevant chemical potentials and positions of the Fermi level; $V^0_N$ may additionally be observed under N-poor conditions, and $N^0_i$ may be prominent under N-rich conditions. We also investigate the incorporation of oxygen and hydrogen, which will likely be present as unintentional impurities. We find that the $O^+_N$ substitutional species readily forms, but oxygen will not lead to n-type conductivity due to formation of DX centers and compensation by interstitial defects. Similarly, substitutional HN and interstitial H i can compensate both p- and n-type dopants. Our results provide detailed, microscopic guidance for the development of electronic devices based on wz-LaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Product Defect Detection System: SYSM- 5620 Final Project

Retail sales is a growing market estimated to up to seven percent year over year. With this growing market there is also a trend in growing rate of retail returns, estimated just last year at $\$$850 billion. Retail stores must ensure that products available for purchase remain safe, undamaged, and acceptable to customers throughout their time in the store. This job exists regardless of the specific solution used because stores are always responsible for preventing damaged or defective products from reaching customers and when they fail to this is categorized under operation inefficiencies which accounts for an estimated $\$$12 billion in returns. When defective items remain on the sales floor, stores may experience increased returns, reduced customer satisfaction, loss of customer trust, and potential safety concerns depending on the product type. As a result, the core job to be done is to identify defective products quickly, remove them from the sales floor before they are purchased, and preserve useful information about the defect so that the store can improve its handling, stocking, and supplier coordination over time. The need for a more reliable process is especially important in high volume retail environments where employees manage large numbers of products across many aisles, shelves, and storage areas. In these settings, manual inspection alone can be inconsistent and difficult to sustain at the individual item level. At the same time, broader retail trends continue to emphasize operational efficiency, product visibility, and improved customer experience, creating an opportunity for more automated and data driven defect detection methods.

42 ENGINEERING↗
NASA NTRS2005

Application of Hilbert-Huang Transform for Improved Defect Detection in Terahertz NDE of Shuttle Tiles

Terahertz NDE is being examined as a method to inspect the adhesive bond-line of Space Shuttle tiles for defects. Terahertz signals are generated and detected, using optical excitation of biased semiconductors with femtosecond laser pulses. Shuttle tile samples were manufactured with defects that included repair regions unbond regions, and other conditions that occur in Shuttle structures. These samples were inspected with a commercial terahertz NDE system that scanned a tile and generated a data set of RF signals. The signals were post processed to generate C-scan type images that are typically seen in ultrasonic NDE. To improve defect visualization the Hilbert-Huang Transform, a transform that decomposes a signal into oscillating components called intrinsic mode functions, was applied to test signals identified as being in and out of the defect regions and then on a complete data set. As expected with this transform, the results showed that the decomposed low-order modes correspond to signal noise while the high-order modes correspond to low frequency oscillations in the signal and mid-order modes correspond to local signal oscillations. The local oscillations compare well with various reflection interfaces and the defect locations in the original signal.

Anastasi, Robert F.↗
DOE OSTI2025

Atomically resolved edges and defects in lead halide perovskites

Although edges and defects constitute only a small fraction of crystalline materials, they exert an outsized impact on a material′s properties. Organic–inorganic halide perovskites are promising next-generation semiconductor materials with superior cost effectiveness and interesting optoelectronic properties. However, clear images of their edges have remained challenging to obtain owing to their extreme sensitivity. Using truly high-speed ultralow-dose four-dimensional scanning transmission electron microscopy with dose fractionation, we perform ptychography at, to our knowledge, the lowest-dose atomic resolution to date, revealing not only the detailed atomic structure of the edges of a halide perovskite but also their structural dynamics. Here, a majority methylammonium (MA) and iodine (I) edge termination is observed in methylammonium lead iodide (MAPbI 3 ), and the damage rate of its edges and internal defects is found to depend on the concentration and type of vacancies present, with a preponderance of I vacancies in particular correlating with higher rates of damage.

4D-STEM↗
NASA NTRS1989

Radiation damage in scientific charge-coupled devices

Radiation damage is reported on CCDs (charge-coupled devices) that have been primarily exposed to 1.25-MeV gamma rays (Co-60 source). Two important classes of radiation damage are discussed, namely, bulk and ionization effects. Bulk damage or displacement damage is a process in which silicon atoms are displaced from their normal lattice positions by high-energy photons or particles. Single atomic displacements or cluster defect damage is produced, depending on the energy and type of radiation experienced by the detector. Bulk damage creates trapping sites within the CCD's signal channel which in turn degrades charge-transfer efficiency.

Janesick, James↗
NASA NTRS1989

Reduced gravitropic sensitivity in roots of a starch-deficient mutant of Nicotiana sylvestris

Gravitropism was studied in seedlings of Nicotiana sylvestris Speg. et Comes wild-type (WT) and mutant NS 458 which has a defective plastid phosphoglucomutase (EC 2.7.5.1.). Starch was greatly reduced in NS 458 compared to the WT, but small amounts of starch were detected in rootcap columella cells in NS 458 by light and electron microscopy. The roots of WT are more sensitive to gravity than mutant NS 458 roots since: (1) in mutant roots, curvature was reduced and delayed in the time course of curvature; (2) curvature of mutant roots was 24-56% that of WT roots over the range of induction periods tested; (3) in intermittent-stimulation experiments, curvature of mutant roots was 37% or less than that of WT roots in all treatments tested. The perception time, determined by intermittent-stimulation experiments, was < or = 5 s for WT roots and 30-60 s for mutant roots. The growth rates for WT and NS 458 roots were essentially equal. These results and our previous results with WT and starchless mutant Arabidopsis roots (Kiss et al. 1989, Planta 177, 198-206) support the conclusions that a full complement of starch is necessary for full gravitropic sensitivity and that amyloplasts function in gravity perception. Since a presumed relatively small increase in plastid buoyant mass (N. sylvestris mutant versus Arabidopsis mutant) significantly improves the orientation of the N. sylvestris mutant roots, we suggest that plastids are the likeliest candidates to be triggering gravity perception in roots of both mutants.

Non-NASA Center↗
NASA NTRS2009

Measurement Variability of Vertical Scanning Interferometry Tool Used for Orbiter Window Defect Assessment

The ability to sufficiently measure orbiter window defects to allow for window recertification has been an ongoing challenge for the orbiter vehicle program. The recent Columbia accident has forced even tighter constraints on the criteria that must be met in order to recertify windows for flight. As a result, new techniques are being investigated to improve the reliability, accuracy and resolution of the defect detection process. The methodology devised in this work, which is based on the utilization of a vertical scanning interferometric (VSI) tool, shows great promise for meeting the ever increasing requirements for defect detection. This methodology has the potential of a 10-100 fold greater resolution of the true defect depth than can be obtained from the currently employed micrometer based methodology. An added benefit is that it also produces a digital elevation map of the defect, thereby providing information about the defect morphology which can be utilized to ascertain the type of debris that induced the damage. However, in order to successfully implement such a tool, a greater understanding of the resolution capability and measurement repeatability must be obtained. This work focused on assessing the variability of the VSI-based measurement methodology and revealed that the VSI measurement tool was more repeatable and more precise than the current micrometer based approach, even in situations where operator variation could affect the measurement. The analysis also showed that the VSI technique was relatively insensitive to the hardware and software settings employed, making the technique extremely robust and desirable

Padula, Santo, II↗
NASA NTRS2018

BioSentinel: Optimizing Growth Conditions for Improved Yeast Cell Viability After Long-Term Desiccation

NASA's BioSentinel mission is one of thirteen secondary payloads to be deployed on the Space Launch System Exploration Mission-1 (SLS EM-1). The BioSentinel nanosatellite will be sent into a heliocentric orbit beyond Low Earth Orbit (LEO), to study the effects of deep space radiation on the budding yeast, Saccharomyces cerevisiae. Ionizing radiation encountered in deep space can create damaging lesions in DNA, including double strand breaks (DSBs). Budding yeast is suitable as a biological model to study these effects, as it is eukaryotic, and can be desiccated for prolonged periods while retaining viability, thus serving as a robust analog for human cells. On the ground, yeast cells are grown in liquid medium, then loaded into the wells of microfluidic cards and air dried prior to integration into the payload. Once the spacecraft reaches its target heliocentric orbit, a mixture of growth medium and metabolic indicator dye will be pumped into the microwells at specific time points to rehydrate the cells and allow them to grow. A 3-color LED detection system will measure changes in growth and metabolism resulting from ionizing radiation exposure. BioSentinel contains a wild type control strain and a rad51 mutant that is defective for DNA damage repair. In this study, we will determine the optimal amount of time to grow diploid yeast cells in liquid culture before they are desiccated for space flight. After an extended time in stationary phase, they become more tolerant to desiccation due to stress caused by nitrogen starvation. However, excessive exposure can lead to loss of viability and to a heterogeneous cell population due to sporulation. Since viability loss during desiccation poses a risk to mission success, a stress preconditioning process during initial growth may increase long-term cell viability. To determine the growth period that improves desiccation tolerance but allows for retention of uniform radiation sensitivity, we will grow both strains in liquid medium for a varying number of days (4 to 7), desiccate the cells, and then observe changes to cell viability and ionizing radiation sensitivity over time. Supported by the Space Life Sciences Training Program at NASA Ames Research Center.

Cui, Kaixin↗
NASA NTRSDate not supplied

NDE Methods and Capabilities Handbook – Resources for the Composites NDE Community

Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA’s Advanced Composites Project, a public-private partnership between government, universities and industry, sought to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites was one of the three focused research areas of the project. One deliverable of the project was to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publicly available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate carbon fiber reinforced polymer composite (CFRP) structures. The Handbook seeks to reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. NDE techniques include, but are not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types include, but are not limited to porosity, delamination, voids, AFP defects and impact damage. The Handbook contains details such as inspection parameters, data analysis techniques, inspection efficiency (speed & cost), and limitations. This presentation will describe key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members. Availability of the fabricated NDE standards as well as the raw data collected on the standards by the Consortium members to the NDE community is discussed.

Patricia A Howell↗
DOE OSTI2024

Molecular-Resolution Electron Imaging of Defects and Dynamics at the Ice-Water Interface

Water crystallization into hexagonal ice (type I h ) is one of the most critical processes relevant to the Earth’s environment and human activities. However, despite recent breakthroughs in imaging non-equilibrium condensed ice structures, the ice-water interface has never been imaged at a molecular resolution. This is primarily due to the low stability of the hydrogen bonds in ice under high-resolution microscopy conditions and a lack of methods to prepare compatible samples. Here, this presentation describes the first molecular-resolution imaging of ice crystallized from liquid water and the ice-water interface using high-resolution transmission electron microscopy (HRTEM). By encapsulating deionized (DI) water between two amorphous carbon (a-C) TEM grids and subsequently freezing it with liquid N 2 on a cryo sample stage, we generated two types of ice: non-equilibrium, condensed ice from the atmosphere and encapsulated ice from the DI water (Fig. 1A). Condensed ice usually shows irregular, spherulitic shapes (Fig. 1B). Selected area electron diffraction (SAED) shows that they are a mixture of cubic and hexagonal crystals (Fig. 1C). On the contrary, encapsulated ice forms thin films that contain large-area single-crystalline regions of hexagonal ice oriented along the [0001] zone axis (Fig. 1D). Differential electron energy-loss spectroscopy (EELS) confirmed the high purity of the encapsulated ice free from organic contaminations that are common in other encapsulation methods for HRTEM such as graphene liquid cells. These single-crystalline areas are robust under the electron beam up to ~100 e/Å 2 s. Aberration-corrected HRTEM imaging in these areas achieved a line resolution of ~1.3 Å (Fig. 1E and F). This platform allows us to study near-equilibrium ice structures and dynamics at an unprecedented spatial resolution (Fig. 2). For example, we discovered subdomain-rich regions near the defective crystal edges despite the structure appearing single-crystalline according to diffraction criteria. These subdomains connect via low-angle grain boundaries with flat energy landscapes as a function of tilt angles (according to simulations), showing the high tolerance of ice to defect structures. When we tuned the sample temperature and electron flux rate, we observed radiolysis-controlled bubble generation and dissolution in ice single crystals near a steady state of bubble dynamics. Furthermore, rich beam-induced melting and recrystallization dynamics were observed at the ice-water interface with lattice resolution. These data represent the first observation of the ice-water phase transformation at the sub-nanometer level. In summary, the methods developed in this work enabled molecular-resolution observations of ice and the ice-water interface and shed light on the microstructures and phase transformation pathways. Finer control on the temperature, electron irradiation profile, and imaging detector could eventually lead to real-time observation of ice nucleation in water and address long-standing questions in the nucleation pathways.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRSDate not supplied

TPSAS-NF1676L-32030-DND

Composite structures are often difficult to inspect due to the anisotropic nature of the material systems and the range of flaws and defects that can arise in the manufacturing process. NASA?s Advanced Composites Project, a public-private partnership between government, universities and industry, seeks to address improved methods, tools, and protocols to reduce the development and certification timeline for composite materials and structures. The rapid inspection of composites is one of the three focused research areas of the project. One deliverable of the project is to develop an NDE Methods and Capabilities Handbook. This Handbook provides a publically available guidance document that facilitates the selection of appropriate NDE techniques and provides recommended protocols for detecting and characterizing common flaw types in solid laminate polymer matrix composite (PMC) structures. The Handbook will reduce the time required to develop qualified inspection processes for composite aircraft structures during the development, certification, and manufacturing phases by providing a reference that helps minimize trial and error and provides guidance on best practices, techniques, and settings, for specific flaw types and geometries. The Handbook will include an NDE Guidance Matrix that provides an applicability rating for NDE techniques as they apply to given flaw types. NDE techniques will include, but is not limited to ultrasound, laser based ultrasound, infrared thermography, and x-ray CT. Flaw types will include, but are not limited to porosity, delamination, voids, AFP defects and impact damage. The Handbook will contain details that support the applicability rating including, but not limited to, specimen details, inspection parameters, data analysis techniques, inspection efficiency (speed & cost), and limitations. This presentation will describe key Handbook activities with examples of the techniques and flaw types examined by the Advanced Composite Consortium members.

Patricia A Howell↗
NASA NTRS1990

Comparison of currents predicted by NASCAP/LEO model simulations with elementary Langmuir-type bare probe models for an insulated cable containing a single pinhole

The behavior of a defect in the insulation of a short biased section of cable in a Low Earth Orbit (LEO) space environment was examined. Such studies are of the utmost importance for large space power systems where great quantities of cabling will be deployed. An insulated probe containing a pinhole was placed into a hypothetical high speed LEO plasma. The NASA Charging Analyzer Program (NASCAP/LEO) was used to explore sheath growth about the probe as a function of applied voltage and to predict I-V behavior. A set of independent current calculations using Langmuir's formulations for concentric spheres and coaxial cylinders were also performed. The case of concentric spheres was here extended to include the case of concentric hemispheres. Several simple Langmuir-type models were then constructed to bracket the current collected by the cable. The space-charge sheath radius and impact parameters were used to determine the proper current regime. I-V curves were plotted for the models and comparisons were made with NASCAP/LEO results. Finally, NASCAP/LEO potential contours and surface cell potential plots were examined to explain interesting features in the NASCAP/LEO I-V curve.

Galofaro, Joel T.↗
DOE OSTI2024

The role of defect charge, crystal chemistry, and crystal structure on positron lifetimes of vacancies in oxides

Density functional theory based positron lifetime (PL) calculations for cation and oxygen monovacancies in a range of oxides—hematite, magnetite, hercynite, and alumina—have been conducted to compare the impact of defect chemistry and crystal structure on the predicted lifetimes. The role of defect charge state has also been examined. A comparison across the same type of crystalline structure but different composition shows that oxygen vacancies only induce a slight increase in the positron-electron overlap and thus barely modify the PL as compared to the bulk. A much more substantial increase of PL is observed for cation monovacancies, regardless of crystal structure or the elemental nature of the vacancy, which we ascribe to an enhanced localization of charge density around the vacant site. The structural and compositional richness of the oxide leads to longer defect PLs, with defected hercynite exhibiting the longest PLs. The charge state of cation monovacancies modifies only by a small percentage the positron localization, relegating to secondary importance the metal defect's oxidation state in modifying the lifetime of positrons within vacancy traps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗