Search NASA⌕ Search

SEARCH · Search NASA

Results for “density functional calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Activation Energies for Oxide- and Interface-Trap Charge Generation Due to Negative-Bias Temperature Stress of Si-Capped SiGe-pMOSFETs

We investigate negative-bias temperature instabilities in SiGe pMOSFETs with SiO 2 /HfO 2 gate dielectrics. The measured activation energies for interface-trap charge buildup during negative-bias temperature stress are lower for SiGe channel pMOSFETs with SiO 2 /HfO 2 gate dielectrics and Si capping layers than for conventional Si channel pMOSFETs with SiO 2 gate dielectrics. Electron energy loss spectroscopy and scanning transmission electron microscopy images demonstrate that Ge atoms can diffuse from the SiGe layer into the Si capping layer, which is adjacent to the SiO 2 /HfO 2 gate dielectric. Density functional calculations show that these Ge atoms reduce the strength of nearby Si-H bonds and that Ge-H bond energies are still lower, thereby reducing the activation energy for interface-trap generation for the SiGe devices. Activation energies for oxide-trap charge buildup during negative-bias temperature stress are similarly small for SiGe pMOSFETs with SiO 2 /HfO 2 gate dielectrics and Si pMOSFETs with SiO 2 gate dielectrics, suggesting that, in both cases, the oxide-trap charge buildup likely is rate-limited by hole tunneling into the near-interfacial SiO 2 .

activation energy↗

Magnetic and electrode properties, structure and phase relations of the layered triangular-lattice tellurate Li{sub 4}NiTeO{sub 6}

We examined the magnetic properties of layered oxide Li{sub 4}NiTeO{sub 6} by magnetic susceptibility, magnetization and ESR measurements and density functional calculations, and characterized phase relations, crystal structure and electrochemical properties of Li{sub 4}NiTeO{sub 6}. The magnetization and ESR data indicate the absence of a long-range magnetic order down to 1.8 K, and the magnetic susceptibility data the presence of dominant antiferromagnetic interactions. These observations are well accounted for by density functional calculations, which show that the spin exchanges of the LiNiTeO{sub 6} layers in Li{sub 4}NiTeO{sub 6} are strongly spin frustrated. The electrochemical charging of Li{sub 4}NiTeO{sub 6} takes place at constant potential of ca. 4.2 V vs. Li/Li{sup +} indicating two-phase process as confirmed by X-rays. The starting phase is only partially recovered on discharge due to side reactions. - Graphical abstract: No long-range magnetic order due to frustration in 2D triangular lattice antiferromagnet Li{sub 4}NiTeO{sub 6}. - Highlights: • Li{sub 4}NiTeO{sub 6} is 2D triangular lattice magnet with no long-range order down to 1.8 K. • Intralayer exchange interactions are antiferromagnetic and strongly spin frustrated. • The electrochemical Li extraction proceeds in a two-phase mode at 4.2 V vs. Li/Li{sup +}. • The electrochemical charge–discharge is only partially reversible. • Li{sub 2}O–NiO{sub y}–TeO{sub x} phase relations are reported; Li{sub 4}NiTeO{sub 6} is essentially stoichiometric.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heats of Adsorption of N 2 , CO, Ar, and CH 4 versus Coverage on the Zr-Based MOF NU-1000: Measurements and DFT Calculations

Equilibrium adsorption isotherms at very low coverage (0 to ~0.1 monolayer) have been measured for four simple gases, N 2 , CO, Ar, and CH 4 , at several temperatures above 98 K on the metal-organic framework (MOF) NU-1000 (which has Zr 6 (μ 3 -OH) 4 (μ 3 -O) 4 (OH) 4 (OH 2 ) 4 nodes linked by pyrenes with -COO - end groups). From these, the differential isosteric heats of adsorption (Q st ) were determined versus coverage. These were compared to density functional calculations of the adsorption enthalpies on different sites, assuming that they are filled in a sequential order from the strongest to weakest binding. This comparison shows excellent quantitative agreement on the trends for the four gases, as well as reasonable agreement in the absolute magnitude of the adsorption energies. Here, this agreement indicates that the sites predicted by the density functional calculations to be populated at different coverages for the different gases are correct, thus further increasing our understanding of adsorption on this prototype MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-pressure structural study of MnF 2

In this study, manganese fluoride (MnF 2 ) with the tetragonal rutile-type structure has been studied using a synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy in a diamond anvil cell up to 60 GPa at room temperature combined with first-principles density functional calculations. The experimental data reveal two pressure-induced structural phase transitions with the following sequence: rutile → SrI 2 type (3 GPa)→ α–PbCl 2 type (13 GPa). Complete structural information, including interatomic distances, has been determined in the case of MnF 2 including the exact structure of the debated first high-pressure phase. First-principles density functional calculations confirm this phase transition sequence, and the two calculated transition pressures are in excellent agreement with the experiment. Lattice dynamics calculations also reproduce the experimental Raman spectra measured for the ambient and high-pressure phases. The results are discussed in line with the possible practical use of rutile-type fluorides in general and specifically MnF 2 as a model compound to reveal the HP structural behavior of rutile-type SiO 2 (Stishovite).

36 MATERIALS SCIENCE↗

Pressure-induced phase transition and electrical properties of thermoelectric Al-doped Mg{sub 2}Si

A recent study has shown the thermoelectric performance of Al-doped Mg{sub 2}Si materials can be significantly enhanced at moderate pressure. To understand the cause of this phenomenon, we have performed in situ angle dispersive X-ray diffraction and infrared reflectivity measurements up to 17 GPa at room temperature. Contrary to previous experiment, using helium as a pressure transmission medium, no structural transformation was observed in pure Mg{sub 2}Si. In contrast, a phase transition from cubic anti-fluorite (Fm-3m) to orthorhombic anti-cotunnite (Pnma) was observed in the Al-doped sample at 10 GPa. Infrared reflectivity measurements show the electrical conductivity increases with pressure and is further enhanced after the phase transition. The electron density of states at the Fermi level computed form density functional calculations predict a maximum thermoelectric power factor at 1.9 GPa, which is in good agreement with the experimental observation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density functional study on electronic properties of P-doped spinel silicon carbon nitride

We performed density functional calculations on the electronic properties of P-doped spinel silicon carbon nitride. When Si is replaced by C at the tetrahedral sites of P-doped c-Si{sub 3}N{sub 4}, the band gap can be adjusted, and an insulator-to-metal transition is predicted to occur at the C-to-Si ratio of 0.27. Finally, some possible examinations and potential applications for the large band-gap reduction are discussed. - Graphical abstract: We performed density functional calculations to predict the insulator-to-metal transition by replacing Si by C at the tetrahedral sites of P-doped c-Si{sub 3}N{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization mechanisms of LaFeO3 (010) surfaces determined with first principles calculations

Density functional theory is used to determine the stabilization mechanisms of LaFeO3 (010) surfaces over a range of surface oxygen stoichiometries. For the stoichiometric LaO surface, and for reduced surface terminations, charge redistribution is needed for stabilization that results in an electron-rich surface. In contrast, in the case of the stoichiometric FeO2 surface and oxidized surface terminations with low-coordinated oxygen atoms, a hole-rich surface is needed for stabilization. The calculations further predict that low coordinated oxygen atoms are more stable on LaO-type surface terminations than on FeO2-type surface terminations due to relatively strong electron transfer. In addition to these electronic effects, atomic relaxation is found to be an important contributor to charge compensation, with LaO-type surface terminations exhibiting larger atomic relaxations than FeO2-type surface terminations. As a result, there is a significant contribution from the sub-layers to charge compensation in LaO-type surface terminations.

density functional theory↗

Non-empirical pairing energy functional in nuclear matter and finite nuclei

We study {sup 1}S{sub 0} pairing gaps in neutron and nuclear matter as well as T=1 pairing in finite nuclei on the basis of microscopic two-nucleon interactions. Special attention is paid to the consistency of the pairing interaction and normal self-energy contributions. We find that pairing gaps obtained from low-momentum interactions depend only weakly on approximation schemes for the normal self-energy, required in present energy-density functional calculations, while pairing gaps from hard potentials are very sensitive to the effective-mass approximation scheme.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structural studies on Na[subscript 0.75]CoO[subscript 2] thermoelectric material at high pressures

The crystal structure of Na{sub 0.75}CoO{sub 2} was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co-O bond lengths and a decrease in Na-O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.

36 MATERIALS SCIENCE↗

Oxidative decomposition of methanol on subnanometer palladium clusters : the effect of catalyst size and support composition.

Size and support effects in the oxidative decomposition of methanol on amorphous alumina supported subnanometer palladium clusters were studied under realistic reaction conditions of pressure and temperature. The smaller Pd{sub 8-12} clusters were found to promote the decomposition channel to CO and hydrogen, however with mediocre activity due to poisoning. The larger Pd{sub 15-18} clusters preferentially produce dimethyl ether and formaldehyde, without signs of posioning. A thin titania overcoat applied on the Pd{sub 15-18} improves the sintering-resistance of the catalyst. Accompanying density functional calculations confirm the posioning of small Pd clusters by CO.

08 HYDROGEN↗

From Trivial Kondo Insulator Ce 3 Pt 3 Bi 4 to Topological Nodal-Line Semimetal Ce 3 Pd 3 Bi 4

In this work, using the density functional theory combined with dynamical mean-field theory, we have performed systematic study of the electronic structure and its band topology properties of Ce 3 Pt 3 Bi 4 and Ce 3 Pd 3 Bi 4 . At high temperatures ( ~ 290 K ), the electronic structures of both compounds resemble the open-core 4 f density functional calculation results. For Ce 3 Pt 3 Bi 4 , clear hybridization gap can be observed below 72 K, and its coherent momentum-resolved spectral function below 18 K exhibits an topologically trivial indirect gap of ~ 6 meV and resembles density functional band structure with itinerant 4 f state. For Ce 3 Pd 3 Bi 4 , no clear hybridization gap can be observed down to 4 K, and its momentum-resolved spectral function resembles electron-doped open-core 4 f density functional calculations. The band nodal points of Ce 3 Pd 3 Bi 4 at 4 K are protected by the gliding-mirror symmetry and form ringlike structure. Therefore, the Ce 3 Pt 3 Bi 4 compound is topologically trivial Kondo insulator while the Ce 3 Pd 3 Bi 4 compound is topological nodal-line semimetal.

36 MATERIALS SCIENCE↗

Discovery of single-atom alloy catalysts for CO 2 -to-methanol reaction by density functional theory calculations

The transformations of CO 2 molecules into valuable products are of increasing interest due to the negative impact of anthropogenic CO 2 emissions on global warming. The CO 2 -to-methanol hydrogenation is an economically profitable reaction of carbon fixation, but it still steps away from widespread industrialization because of the lack of efficient and selective catalysts. Recently, single-atom alloy (SAA) catalysts have been developed to work remarkably in CO 2 hydrogenation reactions. Doping isolated single atoms into metallic catalyst can dramatically alter the catalytic performance of the host. Here, we have performed a screening discovery on Ru and 6 RuX (X = Fe, Co, Ni, Cu, Ir and Pt) SAAs using density functional theory (DFT) computations. We considered 13 possible elementary reactions in 4 possible reaction pathways on Ru and all RuX surfaces. In the computed mechanisms, we found that the formation of *H 2 COOH and *HCOO intermediates plays a critical role in determining catalysts’ activities. Doping Co and Pt isolated single atoms into Ru surface can thermodynamically and kinetically facilitate these intermediates formation processes, eventually promoting the production of methanol. The combination of weak binding and enhanced charge redistribution on RuCo and RuPt surfaces give them improved catalytic activities over pure Ru. This work will ultimately facilitate the discovery and development of SAAs for CO 2 to methanol, serving as guidance to experiments and theoreticians alike.

25 ENERGY STORAGE↗

Magnetization distribution in Cu 0.6 Mn 2.4 Ge 2 ferromagnet from polarized and non-polarized neutron powder diffraction aided by density-functional theory calculations

The crystal structure and magnetic properties of Cu 0.6 Mn 2.4 Ge 2 have been re-investigated by a combination of extensive magnetic measurements and neutron scattering experiments, aided by electronic structure calculations. The material is found to be a soft ferromagnet with the ordering temperature T C = 316 K. The magnetocaloric effect evaluated from field-dependent magnetization isotherms is equal to 1.2 J/(kg·K) and 2.5 J/(kg·K) under the maximum applied magnetic field of 2 T and 5 T, respectively. The compound crystallizes in the hexagonal space group P6 3 /mmc. A complex structural disorder necessitated testing of several disorder models against the results of non-polarized and polarized neutron scattering experiments and magnetization measurements. Simulations at the density-functional theory level were also performed to identify the most robust solution that properly described the data observed. The final magnetic structure model reveals non-equal magnetic moments on the Mn1 and Mn2 atoms (2.29(9) µ B and 2.7(1) µ B , respectively) and the presence of vacancies and minor Cu substitution defects in both Mn sites. The work demonstrates how the non-polarized and polarized neutron scattering methods can be combined with electronic structure calculations to establish the microscopic structure of magnetic materials with complex crystallographic disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory calculations of self- and Xe diffusion in U 3 Si 2

Uranium silicide, U 3 Si 2 , has been proposed as an advanced nuclear fuel to be used in light water reactors (LWRs). Development of this alternative to the predominant current fuel, UO 2 , is motivated by enhanced accident tolerance as a result of higher thermal conductivity as well as improved fuel cycle economics through increased uranium density. In order to accurately model the fuel performance of U 3 Si 2 , the diffusion rate of point defects, which is related to self-diffusion, and of fission gas atoms must be determined. DFT calculations are used to predict the U and Si point defect concentrations, the corresponding self-diffusivities, the preferred Xe trap site and the Xe diffusivity. Effects of irradiation are not considered. A low defect formation energy and a high entropy for Si interstitials give rise to Si-rich non-stoichiometry at elevated temperatures. Both U and Si self-diffusion and Xe diffusion are anisotropic as a consequence of the tetragonal crystal structure of U 3 Si 2 . Si diffusion occurs by interstitial mechanisms in both the a-b plane and along the c axis, while the U c axis diffusion rate is controlled by a vacancy mechanism. Interstitial diffusion of U is very fast in the a-b plane of the U 3 Si 2 crystal structure. Xe atoms prefer to occupy U vacancy trap sites. The highest Xe diffusion rate occurs by a vacancy mechanism in both the a-b plane and along the c axis. The diffusion rate is similar in the a-b plane and along the c axis. U and Si self-diffusion and Xe diffusion are all faster in U3Si2 than intrinsic U and Xe diffusion in conventional UO 2 nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Charge transport and magnetization profile at the interface between the correlated metal CaRuO3 and the antiferromagnetic insulator CaMnO3

A combination of spectroscopic probes was used to develop a detailed experimental description of the transport and magnetic properties of superlattices composed of the paramagnetic metal CaRuO3 and the antiferromagnetic insulator CaMnO3. The charge carrier density and Ru valence state in the superlattices are not significantly different from those of bulk CaRuO3. The small charge transfer across the interface implied by these observations confirms predictions derived from density functional calculations. However, a ferromagnetic polarization due to canted Mn spins penetrates 3-4 unit cells into CaMnO3, far exceeding the corresponding predictions. The discrepancy may indicate the formation of magnetic polarons at the interface.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for giant magnetic anisotropy in transition-metal dimers on defected hexagonal boron nitride sheet

Structural and magnetic properties of many transition-metal dimers embedded in a defected hexagonal boron nitride monolayer are investigated through density functional calculations to search for systems with magnetic anisotropy energies (MAEs) larger than 30meV. In particular, Ir–Ir@Dh–BN is found to have both large MAE (∼126 meV) and high structural stability against dissociation and diffusion, and it hence can serve as magnetic unit in spintronics and quantum computing devices. This giant MAE mainly results from the spin orbit coupling and the magnetization of the upper Ir atom, which is in a rather isolated environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗