SEARCH · Search NASA

Results for “deposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Satellite Remote Sensing Observations of Trans-Atlantic Dust Transport and Deposition: A Multi-Sensor Analysis

We analyze the decade-long (2007-2016) record of aerosol measurements from four distinctive sensors, namely CALIOP, MODIS, MISR, and IASI, to quantify the trans-Atlantic dust transport and deposition. These satellite sensors use different techniques to characterize particle size and shape properties; and we have developed sensor-specific methods (broadly categorized into size-based and shape-based method) to derive dust optical depth (DOD). The size-based DOD from MODIS and IASI generally agrees better with AERONET-derived DOD than the shape-based DOD from CALIOP and MISR does. Overall, the shape-based DOD is smaller than the size-based DOD by about 25%, which is consistent with distinctive ways of accounting for coarse-spherical particles of dust-pollution internal mixture. While such dust-pollution mixtures are counted as dust in the size-based DOD, they are excluded in the shape-based DOD. DOD is not a good proxy for dust deposition. Instead, the dust deposition depends strongly on the gradient of DOD on a monthly basis and can be derived by calculating the meridional and zonal dust mass flux based on the three-dimensional distributions of dust. Among the remote sensing measurements, difference in dust deposition is smaller than that of DOD, suggesting that different satellites characterize the DOD gradient more consistently than DOD itself. Satellite measurements of dust deposition and DOD also provide an accurate estimate of the dust loss frequency (LF) that measures how efficient the dust is removed from the atmosphere. We found that these remote sensing measurements yield similar LF values of 0.078 –0.102 d-1, which however is factors of 2-5 smaller than model simulations. This analysis provides valuable insights into potential deficiencies in models’ emission and transport/removal processes and hence helps guide model improvement.

remote sensing↗

NASA NTRS1994

(abstract) Optical Scattering and Surface Microroughness of Ion Beam Deposited Au and Pt Thin Films

Thin films of gold and platinum have been deposited onto superpolished fused silica substrates using thermal evaporation, ion assisted deposition (IAD), and ion assisted sputtering. The influence of ion beam flux, thin film material, and deposition rate on the films microroughness have been investigated. Short range surface microroughness of the films has been examined using scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Long range surface microroughness has been characterized using an angle resolved optical scatterometer. Results indicate that ion beam deposited coatings have improved microstructure over thermally evaporated films.

assisted sputtering fused silica ion beam microrou↗

NASA NTRS2017

Improving X-Ray Optics via Differential Deposition

Differential deposition, a post-fabrication figure correction technique, has the potential to significantly improve the imaging quality of grazing-incidence X-ray optics. DC magnetron sputtering is used to selectively coat the mirror in order to minimize the figure deviations. Custom vacuum chambers have been developed at NASA MSFC that will enable the implementation of the deposition on X-ray optics. A factor of two improvement has been achieved in the angular resolution of the full-shell X-ray optics with first stage correction of differential deposition. Current efforts are focused on achieving higher improvements through efficient implementation of differential deposition.

differential deposition grazing↗

NASA NTRS1973

Calculation of energy deposition distributions for simple geometries

When high-energy charged particles pass through a thin detector, the ionization energy loss in that detector is subject to fluctuations or straggling which must be considered in interpreting the data. Under many conditions, which depend upon the charge and energy of the incident particle and the detector geometry, the ionization energy lost by the particle is significantly different from the energy deposited in the detector. This problem divides naturally into a calculation of the energy loss that results in excitation and low-energy secondary electrons which do not travel far from their production points, and a calculation of energy loss that results in high-energy secondary electrons which can escape from the detector. The first calculation is performed using a modification of the Vavilov energy loss distribution. A cutoff energy is introduced above which all electrons are ignored and energy transferred to low energy particles is assumed to be equivalent to the energy deposited by them. For the second calculation, the trajectory of the primary particle is considered as a source of secondary high-energy electrons. The electrons from this source are transported using Monte Carlo techniques and multiple scattering theory, and the energy deposited by them in the detector is calculated. The results of the two calculations are then combined to predict the energy deposition distribution. The results of these calculations are used to predict the charge resolution of parallel-plate pulse ionization chambers that are being designed to measure the charge spectrum of heavy nuclei in the galactic cosmic-ray flux.

Watts, J. W., Jr.↗

NASA NTRS1973

Mapping quaternary landforms and deposits in the Midwest and Great Plains by means of ERTS-1 multispectral imagery

ERTS-1 multispectral images are proving effective for differentiating many kinds of Quaternary surficial deposits and landforms units in Illinois, Iowa, Missouri, Kansas, Nebraska, and South Dakota. Examples of features that have been distinguished are: (1) the more prominent end moraines of the last glaciation; (2) certain possible palimpsests of older moraines mantled by younger deposits; (3) various abandoned river valleys, including suspected ones deeply filled by deposits; (4) river terraces; and (5) some known faults and a few previously unmapped lineaments that may be faults. The ERTS images are being used for systematic mapping of Quaternary landforms and deposits in about 20 potential study areas. Some study areas, already well mapped, provide checks on the reliability of mapping from the images. For other study areas, previously mapped only partly or not at all, our maps will be the first comprehensive, synoptic ones, and should be useful for regional land-use planning and ground-water, engineering-geology, and other environmental applications.

Morrison, R. B.↗

NASA NTRS1973

Use of ERTS-1 images in the search for porphyry copper deposits in Pakistani Baluchistan

Geomorphic features related to a known porphyry copper deposit at Saindak, western Chagai District, Pakistan, are easily distinguished on ERTS-1 images. New geologic information from the images was used in conjunction with known geology to evaluate one previously known prospect area and to suggest two additional ones, but no new prospects were recognized on the basis of the images alone. The study also showed that Saindak-type deposits are not likely to be present in some extensive areas of the Chagai District. The Saindak deposit is in an area of relatively easily eroded folded sedimentary and volcanic rocks. The deposit is characterized by an elongate zone of easily eroded sulfide-rich rock surrounded by this rim and the central sulfide-rich valley are conspicuous features on the images. Swarms of dikes are probably useful for distinguishing real rims from other resistant rock types, but there is no expression of them on the image, although they are easily seen on aerial photographs of the Saindak rim.

Schmidt, R. G.↗

NASA NTRS1973

Recognition of beach and nearshore depositional features of Chesapeake Bay

Beach and nearshore depositional features are being mapped with the objectives of determining a quick-look analysis of littoral drift and sedimentation patterns in areas of little or no data. Evaluation of beach and nearshore features aid in the selection of small boat harbors, shoreline protective structures, and general coastal zone development. Through ERTS-1 aircraft support imagery, beach depositional features mapped are cuspate forelands, welded beach ridges, and recurved spits. The nearshore depositional features exhibit a bar and trough topography with three distinct types of sedimentary structures; longshore, transverse, and reticulated bars. Synoptic coverage of beach and nearshore depositional features by ERTS-1 data help in determining the general sedimentation patterns, growth of the beach features and stability of the bar and trough topography.

Kerhin, R. T.↗

NASA NTRS1976

Chemical vapor deposition growth

A chemical vapor deposition (CVD) reactor system with a vertical deposition chamber was used for the growth of Si films on glass, glass-ceramic, and polycrystalline ceramic substrates. Silicon vapor was produced by pyrolysis of SiH4 in a H2 or He carrier gas. Preliminary deposition experiments with two of the available glasses were not encouraging. Moderately encouraging results, however, were obtained with fired polycrystalline alumina substrates, which were used for Si deposition at temperatures above 1,000 C. The surfaces of both the substrates and the films were characterized by X-ray diffraction, reflection electron diffraction, scanning electron microscopy optical microscopy, and surface profilometric techniques. Several experiments were conducted to establish baseline performance data for the reactor system, including temperature distributions on the sample pedestal, effects of carrier gas flow rate on temperature and film thickness, and Si film growth rate as a function of temperature.

Ruth, R. P.↗

NASA NTRS1976

Latitudinal variation of wind erosion of crater ejecta deposits on Mars

The characteristics of wind erosion as the dominant process involved in eroding crater ejecta deposits on Mars are studied. Present-day crater formation in mid to high latitudes involves impact into some thickness of aeolian debris, while impact in the equatorial zone is more likely to involve target materials consisting of coarse-grained aeolian lag deposits or even bedrock. Latitudinal variation dominates differences in ejecta emplacement mechanisms and probably differences in patterns of wind erosion of ejecta and surrounding intercrater materials. Escarpments develop as the deposits are eroded back toward crater rims. Erosion only takes places at escarpment edges where surface roughness may be low enough to allow particle entrainment. Preferential preservation of ejecta emplaced in thick debris may occur. An empirical model developed for wind erosion of ejecta deposits in nonmantled areas suggests that removal of ejecta materials on the average is exceedingly slow. Results suggest high differential aeolian erosion rates that are a function of both grain sizes and large-scale surface roughness.

Arvidson, R. E.↗

NASA NTRS1977

Theoretical and experimental studies of the deposition of Na2SO4 from seeded combustion gases

A basic point in the hot corrosion of turbine components is the deposition of sodium sulfate from flames containing sodium and sulfur. An experimental study is described which examines a dew point prediction theory based on the local thermochemical equilibrium (LTCE) method, and a means to calculate the deposition rate is suggested. In addition, a convective diffusion theory, based on the assumption of a chemically frozen boundary layer, utilizing the LTCE results, and imposing the additional effects of mass transport, was also successful in predicting dew points for Na2SO4-seeded combustion gases. A multicomponent mass transfer equation was derived to predict NaSO4 deposition rate via vapor transport at temperatures below the deposition onset temperature.

Kohl, F. J.↗

NASA NTRS1979

Control of dielectric film deposition

Airgap capacitor in deposition chamber is used to monitor deposition. Coating process is completely uniform over edges, points, and internal areas. Areas not requiring coating can be marked. Since deposition process is accomplished at or near room temperature, there is no risk of thermal damage to coated components. With control method, deposition material is fully utilized and no excess coating is necessary to insure protection of coated parts.

Graebner, E. C.↗

NASA NTRS1978

Correlation of dark mantle deposits with high Mg/Al ratios

The Mg/Al concentration ratios from the orbital fluorescence X-ray experiment were used to characterize dark mantle deposits on the moon. The areas studied included the regions of Sulpicius Gallus, Taurus-Littrow, Hadley Rille, Mare Crisium (craters Picard and Pierce), and NE Mare Fecunditatis. In all these cases these deposits exhibit high Mg/Al ratios which suggest the presence of orange, black, and green pyroclastic glasses. The highest concentration of glasses was inferred in the Sulpicius Gallus Formation at about 35%. The depth of the initial pyroclastic deposits was estimated at 3 to 4 meters. Central Mare Serenitatis exhibits high Mg/Al values but does not possess dark mantle deposits. Orbital Al and Mg/Al data for this region is similar to the very low titanium mare basalts.

Schonfeld, E.↗

NASA NTRS1979

Chemically frozen multicomponent boundary layer theory of salt and/or ash deposition rates from combustion gases

There is increased interest in, and concern about, deposition and corrosion phenomena in combustion systems containing inorganic condensible vapors and particles (salts, ash). To meet the need for a computationally tractable deposition rate theory general enough to embrace multielement/component situations of current and future gas turbine and magnetogasdynamic interest, a multicomponent chemically 'frozen' boundary layer (CFBL) deposition theory is presented and its applicability to the special case of Na2SO4 deposition from seeded laboratory burner combustion products is demonstrated. The coupled effects of Fick (concentration) diffusion and Soret (thermal) diffusion are included, along with explicit corrections for effects of variable properties and free stream turbulence. The present formulation is sufficiently general to include the transport of particles provided they are small enough to be formally treated as heavy molecules. Quantitative criteria developed to delineate the domain of validity of CFBL-rate theory suggest considerable practical promise for the present framework, which is characterized by relatively modest demands for new input information and computer time.

Rosner, D. E.↗

NASA NTRS1980

Titanium dioxide antireflection coating for silicon solar cells by spray deposition

A high-speed production process is described for depositing a single-layer, quarter-wavelength thick antireflection coating of titanium dioxide on metal-patterned single-crystal silicon solar cells for terrestrial applications. Controlled atomization spraying of an organotitanium solution was selected as the most cost-effective method of film deposition using commercial automated equipment. The optimal composition consists of titanium isopropoxide as the titanium source, n-butyl acetate as the diluent solvent, sec-butanol as the leveling agent, and 2-ethyl-1-hexanol to render the material uniformly depositable. Application of the process to the coating of circular, large-diameter solar cells with either screen-printed silver metallization or with vacuum-evaporated Ti/Pd/Ag metallization showed increases of over 40% in the electrical conversion efficiency. Optical characteristics, corrosion resistance, and several other important properties of the spray-deposited film are reported. Experimental evidence indicates a wide tolerance in the coating thickness upon the overall efficiency of the cell. Considerations pertaining to the optimization of AR coatings in general are discussed, and a comprehensive critical survey of the literature is presented.

Kern, W.↗

NASA NTRS1982

Deposition of reactively ion beam sputtered silicon nitride coatings

An ion beam source was used to deposit silicon nitride films by reactively sputtering a silicon target with beams of Ar + N2 mixtures. The nitrogen fraction in the sputtering gas was 0.05 to 0.80 at a total pressure of 6 to 2 millionth torr. The ion beam current was 50 mA at 500 V. The composition of the deposited films was investigated by auger electron spectroscopy and the rate of deposition was determined by interferometry. A relatively low rate of deposition of about 2 nm. one-tenth min. was found. AES spectra of films obtained with nitrogen fractions higher than 0.50 were consistent with a silicon to nitrogen ratio corresponding to Si3N4. However the AES spectra also indicated that the sputtered silicon nitride films were contaminated with oxygen and carbon and contained significant amounts of iron, nickel, and chromium, most probably sputtered from the holder of the substrate and target.

Grill, A.↗

NASA NTRS1981

Deposit formation in liquid fuels. II - The effect of selected compounds on the storage stability of Jet A turbine fuel

The influence of substituted pyridines, pyrroles, indoles, and quinolines on the storage stability of conventional Jet A turbine fuel is evaluated. Significant increases in the amount of deposit formed in accelerated storage tests are found upon addition of these compounds at levels as low as one ppm nitrogen. While the effect is correlated with basicity of the nitrogen compound within a given compound class, the correlation does not hold between classes (pyridines, quinolines, etc.). Steric hindrance at the nitrogen atom greatly inhibits deposit promotion. The characteristics, but not the elemental composition, of deposits vary with the identity of the added nitrogen compound and with deposition temperature.

Worstell, J. H.↗

NASA NTRS1982

Topography and stratigraphy of Martian polar layered deposits

The first samples of high resolution Viking Orbiter topographic and stratigraphic data for the layered polar deposits of Mars are presented, showing that these deposits are with respect to both slopes and angular relief similar to those in the south. It is also demonstrated that, in conjunction with stereophotogrammetry, photoclinometry holds promise as a tool for detailed layered deposit studies. The spring season photography, which lends itself to photoclinometric analysis, covers the entire area of the north polar deposits. Detailed tests of layered terrain evolution hypotheses will be made, upon refinement of the data by comparison with stereo data. A more promising refining technique will make use of averaging perpendicular to selected sections to enhance SNR. Local reliefs of 200-800 m, and slopes of 1-8 deg, lead to initial calculations of average layer thickness which yields results of 14-46 m, linearly correlated with slope.

Blasius, K. R.↗

NASA NTRS1982

Deposition and dose from the 18 May 1980 eruption of Mount St. Helens

The downwind deposition and radiation doses was calculated for the tropospheric part of the ash cloud from the May 18, 1980 eruption of Mount St. Helens, by using a large cloud diffusion model. The naturally occurring radionnuclides of radium and thorium, whose radon daughters normally seep very slowly from the rocks and soil, were violently released to the atmosphere. The largest dose to an individual from these nuclides is small, but the population dose to those affected by the radioactivity in the ash is about 100 person rem. This population dose from Mount St. Helens is much greater than the annual person rem routinely released by a typical large nuclear power plant. It is estimated that subsequent eruptions of Mount St. Helens have doubled or tripled the person rem calculated from the initial large eruption. The long range global ash deposition of the May 18 eruption is estimated through 1984, by use of a global deposition model. The maximum deposition is nearly 1000 kg square km and occurs in the spring of 1981 over middle latitudes of the Northern Hemisphere.

Peterson, K. R.↗