Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling Ni Coarsening under Humid Atmosphere in the Electrode of Solid Oxide Cells

Ni coarsening is an important degradation mechanism in solid oxide cells. It is reported that Ni coarsening is faster under a humid atmosphere experimentally, but the underline mechanism is not well understood. In this work, Ni coarsening through Ni(OH)x surface diffusion was investigated by a combination of density-functional theory (DFT) and phase-field modeling (PFM). DFT is used to evaluate the surface coverage and diffusivity of Ni(OH)x on Ni (111) surface and the results are used as an input to the PFM to simulate Ni coarsening under humid atmospheres on both reconstructed and synthetic microstructures. It is found that steam partial pressure and microstructure effect alone cannot explain the faster Ni coarsening under a humid atmosphere observed experimentally. Large local overpotential in fuel cell mode is needed to explain the fast Ni coarsening.

Lei, Yinkai↗
DOE OSTI2026

High-energy neutrino constraints on primordial black holes as dark matter

Primordial black holes (PBHs) are one of the most appealing dark matter candidates over a wide range of masses and abundances. This broad parameter space has been constrained by a variety of observational probes. In this work, for the first time, we use data from high-energy neutrino telescopes, like IceCube and ANTARES, to constrain sub-asteroid mass ($\lesssim 10^{18}\,\mathrm{g}$) Schwarzschild PBHs with extended mass functions. We derive limits from the diffuse high-energy neutrino flux produced by the direct evaporation of PBHs, as well as from the transient signatures associated with PBHs passing in the vicinity of the Earth. While our bounds are slightly weaker than existing constraints from gamma-ray observations, they provide an independent and complementary probe based on observational high-energy neutrino data. We further show that future detectors such as IceCube-Gen2 and KM3NeT can significantly improve these constraints, potentially excluding PBHs with masses up to $\sim \mathrm{few} \times 10^{18}\,\mathrm{g}$ composing the entirety of dark matter.

Mukhopadhyay, Mainak [Fermilab; Chicago U., KICP] ↗
DOE OSTI2025

The effect of ion pairing on speciation and transport in ion exchange membranes at varying hydration levels: A four-state model

Understanding ion pairing in ion exchange membranes (IEMs) is essential for advancing IEM applications in energy and environmental technologies. Here, this study introduces a four-state molecular dynamics model to quantify speciation and transport within Nafion-117, specifically examining the role of ion pairing in monovalent and divalent counterions (NaCl, Na 2 SO 4 , and MgSO 4 ). By analyzing radial distribution functions (RDFs) and molecular snapshots, we distinguish ion pairing modes and classify counterions into four states: condensed counterion, condensed ion pair, free ion pair, and free counterion. A key finding is that while divalent counterions (e. g., Mg 2+ ) maintain stable speciation across hydration levels, monovalent counterions (e.g., Na + ) show notable speciation shifts with hydration. Both monovalent and divalent counterions are not diffusive when condensed onto the polymer (sorbed to membrane functional groups). In contrast, free counterions are diffusive across all hydration levels. To evaluate the overall diffusivity of counterions, four-state fractions and diffusivities are computed, each contributing to counterion transport. The condensed/free ion speciation for multivalent sulfate salts aligns with previous revisions to the Donnan-Manning framework that include ion pairing, thereby validating its relevance to established membrane theories. The four-state model's diffusivity results support several current ion exchange assumptions, including that the condensed counterions are immobile, while uncondensed counterions are mobile. The four-state model offers insights into contact ion pairing within IEMs, highlighting its potential even when undetected in aqueous solution experiments. This work advances the theoretical understanding of counterion speciation in IEMs while identifying model limitations that suggest avenues for refinement, such as distinguishing water-mediated ion pairs between fully hydrated ions.

Ion exchange membranes↗
DOE OSTI2023

U-rich U-Mo Solidus, Liquidus, Enthalpy, and Thermal Diffusivity

Several material properties have been studied as a function of composition as part of the USHPRR effort to use U-10Mo for LEU monolithic fuel foils, with special attention to areas where simulation outcomes can be improved. The liquidus and solidus phase boundaries are important for engineering design of processing parameters and for predicting the degree of microsegregation within initial castings. The numerous phase diagram constructions available in the literature differ significantly in their solid/liquid boundary definitions, therefore, an experimental strategy was employed in order to resolve some of the discord. That strategy focuses not on proving any singular point, but instead to provide data with highly characterized uncertainty. The data presented here is the most consistent with the U-rich liquidus and solidus boundaries provided by H. Okamoto (2012), Berche et al. (2011), and Mardon et al. (1959). The recently suggested change in the peritectic reaction temperature (to 1302 K) suggested by Berchè and adopted by Okamoto is also supported, but with lower confidence. The enthalpy of fusion is a basic characteristic of the solidification reaction property for which is required for both research-oriented predictions of behavior and development of applied design strategies for casting engineering. It has been determined that an admixture model for the heat of fusion between U BCC and Mo BCC is a reasonable assumption within the composition region of interest, though limitations of the measurement accuracy impacts the ability to support any trends more detailed than this baseline behavior. A limited number of thermal diffusivity measurements were also performed into the gamma region to provide additional information for solidification modeling and simulations as well as a check on the component properties of thermal conductivity, density, and heat capacity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling the Contribution of Precipitation Loss to a Radiation Belt Electron Dropout Observed by Van Allen Probes

A drift-diffusion model is used to simulate the low-altitude electron distribution, accounting for azimuthal drift, pitch angle diffusion, and atmospheric backscattering effects during a rapid electron dropout event on 21st August 2013, at L = 4.5. Additional external loss effects are introduced during times when the low-altitude electron distribution cannot be reproduced by diffusion alone. Here, the model utilizes low-altitude electron count rate data from five POES/MetOp satellites to quantify pitch angle diffusion rates. Low-altitude data provides critical constraint on the model because it includes the drift loss cone region where the electron distribution in longitude is highly dependent on the balance between azimuthal drift and pitch angle diffusion. Furthermore, a newly derived angular response function for the detectors onboard POES/MetOp is employed to accurately incorporate the bounce loss cone measurements, which have been previously contaminated by electrons from outside the nominal field-of-view. While constrained by low-altitude data, the model also shows reasonable agreement with high-altitude data. Pitch angle diffusion rates during the event are quantified and are faster at lower energies. Precipitation is determined to account for all of the total loss observed for 450 keV electrons, 88% for 600 keV and 38% for 900 keV. Predictions made in the MeV range are deemed unreliable as the integral energy channels E3 and P6 fail to provide the necessary constraint at relativistic energies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

The Effects of Morphology and Hydration on Anion Transport in Self-Assembled Nanoporous Membranes

Ordered nanoporous polymer membranes offer opportunities for systematically probing the mechanisms of ion transport under confinement and for realizing useful materials for electrochemical devices. Here, we examine the impact of morphology and ion hydration on the transport of hydroxide and bromide anions in nanostructured polymer membranes with 1 nm scale pores. We use aqueous lyotropic self-assembly of an amphiphilic monomer, with a polymerizable surfactant to create direct hexagonal (H I ) and gyroid mesophases. UV-induced cross-linking leads to the formation of nanoporous polymers with water continuous channels. The membranes are mechanically robust and chemically durable, resisting degradation during extended exposure to 1 M NaOH solutions. We use a combination of electrochemical impedance spectroscopy, pulsed-field gradient NMR spectroscopy, and molecular simulations to elucidate anion and water transport. The as-prepared hexagonal systems display higher conductivity and lower activation energies for both anions relative to the gyroid system. When compared at equivalent hydration, however, gyroid and hexagonal membranes show similar activation energies, with nearly identical conductivities at ambient temperatures. Both ionic conductivity and water diffusivity increase with increasing hydration. Here, the water uptake as a function of relative humidity for the hexagonal and gyroid mesophases ultimately dictates the water diffusion and magnitude of the ionic conductivity, with the hexagonal system showing overall higher capacity for hydration and thus faster ion transport. The durability of these materials under aggressive alkaline conditions and their relatively high hydroxide ion conductivity suggest that these nanostructured polymers could be of interest as membranes for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemically controlled pattern formation in self-oscillating elastic shells

Significance Mechanochemical processes drive various biological functions including morphogenesis and morphological changes in responsive synthetic hydrogels. By allowing reactive components to function in an elastic closed shell, autonomous chemical reactions generate microcompartments capable of expanding or contracting or induce buckled patterns. This capability can drive specific functions such as enhancing the rate of diffusion of compartmentalized chemicals or releasing cargos at specific rates. Here, we demonstrate the coupling of mechanical response to autonomous chemical reactions in elastic shells which swell and deswell to generate specific dynamic patterns and morphologies. The reverse feedback from the mechanical input triggers the chemical reaction. Our work inspires the design of responsive shells to enhance the functionality of microcompartments and nanoreactors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Simulations of self- and Xe diffusivity in uranium mononitride including chemistry and irradiation effects

A combination of density functional theory and empirical potential atomic scale simulations have been used to determine a model for defect stability and mobility in uranium mononitride (UN), as a function of temperature (T) and N 2 partial pressure (p N 2 ). Using the model, predictions of hypo-stoichiometry under U-rich conditions compare favorably to CALPHAD calculations using the TAF-ID database. Furthermore, our predictions of U and N self-diffusivity are in good agreement with experiments carried out as a function of T at specific partial pressures under thermal equilibrium. The validated atomic scale data have then been implemented within a cluster dynamics method to simulate irradiation-enhanced defect concentrations. All defects and clusters studied have significantly enhanced concentrations, with respect to thermal equilibrium, as T is lowered. The irradiation-enhanced Xe diffusivity is compared to post-irradiation annealing and in-pile experiments. In conclusion, the contributions of various defects and clusters to non-stoichiometry, self-diffusivity, and Xe diffusivity are discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Spin response and neutrino mean free path in neutron matter

The longitudinal and transverse density- and spin-density response functions in pure neutron matter (PNM) are derived over a wide range of densities within the time dependent local spin density approximation. The underlying density functional was derived from an Auxiliary Field Diffusion Monte Carlo computation of the equation of state of unpolarized and fully spin polarized PNM. In order to assess the dependence of the results on the specific underlying nucleon–nucleon Hamiltonian, we used both the phenomenological Argonne AV8' + UIX force, and local chiral forces up to next-to-next-to-leading-order (N 2 LO). Finally, the resulting response function has then been applied to the study of the neutrino mean free path in PNM.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Stability Criteria for Self-Propagating Reaction Waves in Co/Al Multilayers

The propagation of self-sustained formation reactions in sputter-deposited Co/Al multilayers is known to exhibit a design-dependent instability. Multilayers having thin bilayers (<55 nm period) exhibit stable propagating waves, whereas those with a larger period react unstably. The specific two-dimensional (2D) instability observed involves the transverse propagation of a band in front of a stalled front commonly referred to as a “spin band.” Previous finite-element studies have shown that these instabilities are thermodynamically driven by the forward conduction of heat away from the flame front. However, the magnitude of that loss is inherently tied to the bilayer design in traditional bimetallic multilayers, which couples any proposed stability criteria to a varying critical diffusion distance. Here, this work utilizes a recently developed class of materials known as “inert-mediated reactive multilayers” to decouple the thermodynamic and kinetic contributions to propagating wave stability by reducing the stored chemical energy density in normally stable bilayer designs. By depositing an inert product phase (B2-CoAl) within the mid-plane of Co and Al reactant layers, spin instabilities arise as a function of both diluted volume and critical diffusion distance. From there, a stability criterion is determined for Co/Al multilayers based on enthalpy loss from the reaction zone, and its physical significance is explored.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A combined first principles study of the structural, magnetic, and phonon properties of monolayer CrI3

The first magnetic 2D material discovered, monolayer (ML) CrI3, is particularly fascinating due to its ground state ferromagnetism. However, because ML materials are difficult to probe experimentally, much remains unresolved about ML CrI3’s structural, electronic, and magnetic properties. Here, we leverage Density Functional Theory (DFT) and high-accuracy Diffusion Monte Carlo (DMC) simulations to predict lattice parameters, magnetic moments, and spin–phonon and spin–lattice coupling of ML CrI3. We exploit a recently developed surrogate Hessian DMC line search technique to determine CrI3’s ML geometry with DMC accuracy, yielding lattice parameters in good agreement with recently published STM measurements—an accomplishment given the ~10% variability in previous DFT-derived estimates depending upon the functional. Strikingly, we find that previous DFT predictions of ML CrI3’s magnetic spin moments are correct on average across a unit cell but miss critical local spatial fluctuations in the spin density revealed by more accurate DMC. DMC predicts that magnetic moments in ML CrI3 are 3.62 μB per chromium and -0.145 μB per iodine, both larger than previous DFT predictions. The large disparate moments together with the large spin–orbit coupling of CrI3’s I-p orbital suggest a ligand superexchange-dominated magnetic anisotropy in ML CrI3, corroborating recent observations of magnons in its 2D limit. We also find that ML CrI3 exhibits a substantial spin–phonon coupling of ~3.32 cm-1. Our work, thus, establishes many of ML CrI3’s key properties, while also continuing to demonstrate the pivotal role that DMC can assume in the study of magnetic and other 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Characterising Ion-Irradiated FeCr: Hardness, Thermal Diffusivity and Lattice Strain

Ion-irradiated FeCr alloys are useful for understanding and predicting neutron damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation induced defects, probed by transmission electron microscopy (TEM), as well as changes in mechanical properties. Across these studies, a wide range of irradiation conditions has been employed on samples with different processing histories, which complicates the analysis of the relationship between defect structures and material properties. Furthermore, key properties, such as irradiation-induced changes in thermal transport and lattice strain, are little explored. Here we present a systematic study of Fe3Cr, Fe5Cr and Fe10Cr binary alloys implanted with 20 MeV Fe3+ ions to nominal doses of 0.01 dpa and 0.1 dpa at room temperature. Nanoindentation, transient grating spectroscopy (TGS) and X-ray micro-beam Laue diffraction were used to study the changes in hardness, thermal diffusivity and strain in the material as a function of damage and Cr content. Our results suggest that Cr leads to an increased retention of irradiation-induced defects, causing substantial changes in hardness and lattice strain. However, thermal diffusivity varies little with increasing damage and instead degrades significantly with increasing Cr content in the material. We find significant lattice strains even in samples exposed to a nominal displacement damage of 0.01 dpa. The defect density predicted from the lattice strain measurements is significantly higher than that observed in previous TEM studies, suggesting that TEM may not fully capture the irradiation-induced defect population. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

FeCr alloys↗
DOE OSTI2024

Ni coarsening under humid atmosphere in the electrode of solid oxide cells: A combined study of density-functional theory and phase-field modeling

Ni coarsening in solid oxide cell (SOC) electrodes is known to be significantly faster under a humid atmosphere. The underlying mechanisms, though, have not been fully understood. In this work, we examine the surface diffusion of Ni(OH) x by a combination of density-functional theory and phase-field modeling. Here, density-functional theory is used to evaluate the adsorption and diffusion of the Ni(OH) x species on Ni (111) surface, and the results are used to obtain the effective surface diffusivity of Ni versus steam and hydrogen gas partial pressures. This diffusivity is used as an input for a phase-field model to investigate the Ni coarsening in SOC electrodes. It is found that Ni(OH) x formed through chemical reaction cannot accelerate coarsening unless an extremely high steam to hydrogen ratio is reached. However, if Ni(OH) x is formed through electrochemical reactions near triple phase boundaries (TPBs), surface diffusion of Ni(OH) x may cause faster Ni coarsening in fuel cell mode under a large overpotential. Specifically, surface diffusion of Ni(OH) may be comparable to or faster than that of Ni under an overpotential that is large but still possible under fuel cell operating conditions.

25 ENERGY STORAGE↗
DOE OSTI2024

Review of the second charged-particle transport coefficient code comparison workshop

We report the results of the second charged-particle transport coefficient code comparison workshop, which was held in Livermore, California on 24–27 July 2023. This workshop gathered theoretical, computational, and experimental scientists to assess the state of computational and experimental techniques for understanding charged-particle transport coefficients relevant to high-energy-density plasma science. Data for electronic and ionic transport coefficients, namely, the direct current electrical conductivity, electron thermal conductivity, ion shear viscosity, and ion thermal conductivity were computed and compared for multiple plasma conditions. Additional comparisons were carried out for electron–ion properties such as the electron–ion equilibration time and alpha particle stopping power. Overall, 39 participants submitted calculated results from 18 independent approaches, spanning methods from parameterized semi-empirical models to time-dependent density functional theory. In the cases studied here, we find significant differences—several orders of magnitude—between approaches, particularly at lower temperatures, and smaller differences—roughly a factor of five—among first-principles models. We investigate the origins of these differences through comparisons of underlying predictions of ionic and electronic structure. The results of this workshop help to identify plasma conditions where computationally inexpensive approaches are accurate, where computationally expensive models are required, and where experimental measurements will have high impact.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

The role of high-order electron correlation effects in a model system for non-valence correlation-bound anions

The diffusion Monte Carlo (DMC), auxiliary field quantum Monte Carlo (AFQMC), and equation-of-motion coupled cluster (EOM-CC) methods are used to calculate the electron binding energy (EBE) of the non-valence anion state of a model (H2O)4 cluster. Two geometries are considered, one at which the anion is unbound and the other at which it is bound in the Hartree–Fock (HF) approximation. It is demonstrated that DMC calculations can recover from the use of a HF trial wave function that has collapsed onto a discretized continuum solution, although larger EBEs are obtained when using a trial wave function for the anion that provides a more realistic description of the charge distribution and, hence, of the nodal surface. For the geometry at which the cluster has a non-valence correlation-bound anion, both the inclusion of triples in the EOM-CC method and the inclusion of supplemental diffuse d functions in the basis set are important. DMC calculations with suitable trial wave functions give EBE values in good agreement with our best estimate EOM-CC result. AFQMC using a trial wave function for the anion with a realistic electron density gives a value of the EBE nearly identical to the EOM-CC result when using the same basis set. For the geometry at which the anion is bound in the HF approximation, the inclusion of triple excitations in the EOM-CC calculations is much less important. The best estimate EOM-CC EBE value is in good agreement with the results of DMC calculations with appropriate trial wave functions.

Upadhyay, Shiv (ORCID:0000000285010501)↗
DOE OSTI2022

Constraining IGM enrichment and metallicity with the C iv forest correlation function

ABSTRACT The distribution and abundance of metals in the diffuse intergalactic medium (IGM) have implications for galaxy formation and evolution models, and has been argued to be sensitive to the Universe’s reionization history. However, reduced sensitivity in the near-IR implies that probing IGM metals at z > 4 is currently out of reach with the traditional method of detecting individual absorbers. We present a new technique based on clustering analysis that enables the detection of these weak IGM absorbers. We investigate the two-point correlation function (2PCF) of the ${\rm C\, {\small IV}}$ forest as a probe of IGM metallicity and enrichment topology by simulating the z = 4.5 IGM with models of inhomogeneous metal distributions. The 2PCF of the ${\rm C\, {\small IV}}$ forest demonstrates a clear peak at a characteristic separation corresponding to the doublet separation of the ${\rm C\, {\small IV}}$ line.The peak amplitude scales quadratically with metallicity, while enrichment topology affects both the shape and amplitude of the 2PCF. For models consistent with the distribution of metals at z ∼ 3, we find that we can constrain [C/H] to within 0.2 dex, log$\, M_{\rm {min}}$ to within 0.4 dex, and R to within 15 per cent. We show that CGM absorbers can be reliably identified and masked, thus recovering the underlying IGM signal. The auto-correlation of the metal-line forest presents a compelling avenue to constrain the IGM metallicity and enrichment topology with high precision at z > 4, thereby pushing such measurements into the Epoch of Reionization.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Metallization of colloidal crystals

Colloidal crystals formed by size-asymmetric binary particles coassemble into a wide variety of colloidal compounds with lattices akin to ionic crystals. Recently, a transition from a compound phase with a sublattice of small particles to a metal-like phase in which the small particles are delocalized has been predicted computationally and observed experimentally. In this colloidal metallic phase, the small particles roam the crystal maintaining the integrity of the lattice of large particles, as electrons do in metals. A similar transition also occurs in superionic crystals, termed sublattice melting. Here, we use energetic principles and a generalized molecular dynamics model of a binary system of functionalized nanoparticles to analyze the transition to sublattice delocalization in different coassembled crystal phases as a function of temperature (T), number of grafted chains on the small particles, and number ratio between the small and large particles n s : n l . Here we find that n s : n l is the primary determinant of crystal type due to energetic interactions and interstitial site filling, while the number of grafted chains per small particle determines the stability of these crystals. We observe first-order sublattice delocalization transitions as T increases, in which the host lattice transforms from low- to high-symmetry crystal structures, including A20 → bct → bcc, A d → bct → bcc, and bcc → bcc/fcc → fcc transitions and lattices. Analogous sublattice transitions driven primarily by lattice vibrations have been seen in some atomic materials exhibiting an insulator-metal transition also referred to as metallization. We also find minima in the lattice vibrations and diffusion coefficient of small particles as a function of n s : n l , indicating enhanced stability of certain crystal structures for n s : n l values that form compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Emergence of liquid following laser melting of gold thin films

X-ray structural science is undergoing a revolution driven by the emergence of X-ray Free-electron Laser (XFEL) facilities. The structures of crystalline solids can now be studied on the picosecond time scale relevant to phonons, atomic vibrations which travel at acoustic velocities. In the work presented here, X-ray diffuse scattering is employed to characterize the time dependence of the liquid phase emerging from femtosecond laser-induced melting of polycrystalline gold thin films using an XFEL. In a previous analysis of Bragg peak profiles, we showed the supersonic disappearance of the solid phase and presented a model of pumped hot electrons carrying energy from the gold surface to scatter at internal grain boundaries. This generates melt fronts propagating relatively slowly into the crystal grains. By conversion of diffuse scattering to a partial X-ray pair distribution function, we demonstrate that it has the characteristic shape obtained by Fourier transformation of the measured F ( Q ). The diffuse signal fraction increases with a characteristic rise-time of 13 ps, roughly independent of the incident pump fluence and consequent final liquid fraction. This suggests the role of further melt-front nucleation processes beyond grain boundaries.

36 MATERIALS SCIENCE↗