Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

23.4% monolithic epitaxial GaAsP/Si tandem solar cells and quantification of losses from threading dislocations

A 2-terminal, dual-junction, epitaxially integrated, GaAsP/Si tandem solar cell with an 3rd party certified efficiency of 23.4 % was fabricated via MOCVD growth on an ex-situ produced Si sub cell. The drastic efficiency improvement over the authors previous peer-reviewed demonstration of such a device architecture is examined. Critical advancements in top cell design to maximize short wavelength response were critical in enabling improved top cell response. An in-depth analysis of this champion tandem cell has identified key loss mechanisms which elucidate the pathway for further efficiency gains. First, voltage dependent collection efficiency in the GaAsP top cell is the primary cause of fill factor losses currently limiting efficiency. Analysis of spectrally resolved I–V measurements and analytical device modeling and indicate poor diffusion length due to elevated dislocation densities as the likely cause for the voltage dependent collection efficiency. Second, modeling for the GaAs 0.75 P 0.25 top cell, using experimental data at multiple dislocation densities, provides quantitative understanding of the current and voltage losses associated with threading dislocations providing a clear efficiency pathway with reduction in dislocation density. Finally, Si subcell modeling identifies the pathway for further Si subcell advances over the present, simplistic design, which has yet to employ the known benefits of rear surface texture or dielectric passivation.

14 SOLAR ENERGY↗

In Situ Neutron Diffraction Study of the Influence of Microstructure on the Mechanical Response of Additively Manufactured 304L Stainless Steel

In situ neutron diffraction measurements were completed for this study during tensile and compressive deformation of stainless steel 304L additively manufactured (AM) using a high power directed energy deposition process. Traditionally produced wrought 304L material was also studied for comparison. The AM material exhibited roughly 200 MPa higher flow stress relative to the wrought material. Crystallite size, crystallographic texture, dislocation density, and lattice strains were all characterized to understand the differences in the macroscopic mechanical behavior. The AM material’s initial dislocation density was about 10 times that of the wrought material, and the flow strength of both materials obeyed the Taylor equation, indicating that the AM material’s increased yield strength was primarily due to greater dislocation density. Finally, a ~50 MPa flow strength tension/compression asymmetry was observed in the AM material, and several potential causes were examined.

36 MATERIALS SCIENCE↗

Mechanical Response of Additively Manufactured Stainless Steel 304L Across a Wide Range of Loading Conditions

The mechanical response of additively manufactured (AM) stainless steel 304L has been investigated across a broad range of loading conditions, covering 11 decades of strain rate, and compared with the behaviors of traditional ingot-derived (wrought) material. In general, the AM material exhibits a greater strength and reduced ductility compared with the baseline wrought form. These differences are consistently found from quasi-static and high strain rate tests. A detailed investigation of the microstructure, the defect structure, the phase, and the composition of both forms reveals differences that may contribute to the differing mechanical behaviors. Compared with the baseline wrought material, dense AM stainless steel 304L has a more complex grain structure with substantial sub-structure, a fine dispersion of ferrite, increased dislocation density, oxide dispersions and larger amounts of nitrogen. In-situ neutron diffraction studies conducted during quasi-static loading suggest that the increased strength of AM material is due to its initially greater dislocation density. The flow strength of both forms is correlated with dislocation density through a square root dependence akin to a Taylor-like relationship. Neutron diffraction measurements of lattice strains also correlate with a crystal plasticity finite element simulations of the tensile test. Other simulations predict a significant degree of elastic and plastic anisotropy due to crystallographic texture. Hopkinson tests at higher strain rates $\dot{ε}$ = 500 and 2500 s -1 ) also show a greater strength for AM stainless steel 304L; although, the differences compared with wrought are reduced at higher strain rates. Gas gun impact tests, including reverse ballistic, forward ballistic and spall tests, consistently reveal a larger dynamic strength in the AM material. The Hugoniot Elastic Limit (HEL) of AM SS 304L exceeds that of wrought material although considerable variability is observed with the AM material. Forward ballistic testing demonstrates spall strengths of AM material (3.27 -- 3.91 GPa) that exceed that of the wrought material (2.63 -- 2.88 GPa). The Hugoniot equation-of-state for AM samples matches archived data for this metal alloy.

36 MATERIALS SCIENCE↗

Origins of electrostatic potential wells at dislocations in polycrystalline Cu(In,Ga)Se{sub 2} thin films

Thin-film solar cells based on Cu(In,Ga)Se{sub 2} (CIGSe) reach high power-conversion efficiencies in spite of large dislocation densities of up to 10{sup 10}–10{sup 11} cm{sup −2}. The present work gives insight into the structural and compositional properties of dislocations in CIGSe thin films, which are embedded in a complete solar cell stack. These properties are related to the average electrical potential distributions obtained by means of inline electron holography. At a part of the dislocations studied, the average electrostatic potential shows local minima, all with depths of about −1.4 V. The measured average electrostatic potential distributions were modeled in order to reveal possible influences from strain fields, excess charge, and also compositional changes at the dislocation core. Cu depletion around the dislocation core, as evidenced by atom-probe tomography, explains best the measured potential wells. Their influences of the strain field around the dislocation core and of excess charge at the dislocation core are small. A structural model of dislocations in CIGSe thin films is provided which includes a Cu-depleted region around the dislocation core and gives a possible explanation for why decent photovoltaic performances are possible in the presence of rather large dislocation densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shock metamorphism of deformed quartz

The effect produced by shock loading (to peak pressures of 12 and 24) on deformed synthetic quartz containing a dislocation and abundant bubbles and small inclusions was investigated, and the relationships between preexisting dislocation density shock lamellae in the target material were examined. The resultant material was found to be inhomogeneously deformed and extremely fractured. Results of TEM examinations indicate that no change in dislocation density was caused by shock loading except in regions containing shock lamellae, where the dislocation density was lowered. The shock-induced defects tend to nucleate on and be controlled by preexisting stress concentrators; shock lamellae, glassy veins, and most curviplanar defects form in tension, presumably during release. An extremely mobile silica fluid is formed and injected into fractures during release, which forcibly removes crystalline fragments from vein walls. It is concluded that shock deformation in quartz is dominated by fracture and melting.

Gratz, Andrew J.↗

Multiscale Model for Simulating Fission-Induced Recrystallization in U-Mo Alloy

U-Mo alloy is one of the most promising fuels for the future high performance research and test reactors due to its high uranium loading density and stable irradiation behavior. However, a major concern to its qualification is the fuel swelling at high fission density due to the formation of large fission-gas bubbles. The fission-induced recrystallization further expedites the formation and growth of gas bubbles. So far, the exact mechanism of recrystallization is still unclear. One possible driving force for recrystallization is the production of point defects and interstitial loops due to irradiation. Following this, we developed a multi-scale model by integrating the rate-theory and phase-field models to study microstructural evolutions in irradiated U-Mo alloy, i.e., fission-induced gas bubble evolution and recrystallization. Density function theory (DFT) calculations are utilized to predict the defect formation energies, diffusivities of defects, the interfacial energy of gas bubble, and the elastic constants of U-Mo alloy, etc. The dislocation density evolution is predicted by the rate-theory developed by Jeff. The grain subdivision occurs once the dislocation density is above a critical value. The grain growth coupled with gas bubbles evolution is modeled using a multi-phase phase-field model. The effects of fission rate and initial grain microstructure on the recrystallization process are systematically investigated. The simulated dislocation density, sub-grain size distribution, and volume fraction of the recrystallization grains under different fission density are comparable with experimental data. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High purity low dislocation GaAs single crystals

Recent advances in GaAs bulk crystal growth using the LEC (liquid encapsulated Czochralski) technique are described. The dependence of the background impurity concentration and the dislocation density distribution on the materials synthesis and growth conditions were investigated. Background impurity concentrations as low as 4 x 10 to the 15th power were observed in undoped LEC GaAs. The dislocation density in selected regions of individual ingots was very low, below the 3000 cm .3000/sq cm threshold. The average dislocation density over a large annular ring on the wafers fell below the 10000/sq cm level for 3 inch diameter ingots. The diameter control during the program advanced to a diameter variation along a 3 inch ingot less than 2 mm.

Chen, R. T.↗

Strain relaxation in GaN/Al{sub x}Ga{sub 1-x}N superlattices grown by plasma-assisted molecular-beam epitaxy

We have investigated the misfit relaxation process in GaN/Al{sub x}Ga{sub 1-x}N (x = 0.1, 0.3, 0.44) superlattices (SL) deposited by plasma-assisted molecular beam epitaxy. The SLs under consideration were designed to achieve intersubband absorption in the mid-infrared spectral range. We have considered the case of growth on GaN (tensile stress) and on AlGaN (compressive stress) buffer layers, both deposited on GaN-on-sapphire templates. Using GaN buffer layers, the SL remains almost pseudomorphic for x = 0.1, 0.3, with edge-type threading dislocation densities below 9 x 10{sup 8} cm{sup -2} to 2 x 10{sup 9} cm{sup -2}. Increasing the Al mole fraction to 0.44, we observe an enhancement of misfit relaxation resulting in dislocation densities above 10{sup 10} cm{sup -2}. In the case of growth on AlGaN, strain relaxation is systematically stronger, with the corresponding increase in the dislocation density. In addition to the average relaxation trend of the SL, in situ measurements indicate a periodic fluctuation of the in-plane lattice parameter, which is explained by the different elastic response of the GaN and AlGaN surfaces to the Ga excess at the growth front. The results are compared with GaN/AlN SLs designed for near-infrared intersubband absorption.

36 MATERIALS SCIENCE↗

Using In Situ Neutron Diffraction to Isolate Specific Features of Additively Manufactured Microstructures in 304L Stainless Steel and Identify Their Effects on Macroscopic Strength

Additive manufacturing of metal components results in unique microstructures with, necessarily, mechanical properties that are distinct from conventionally produced components. In this paper, four distinct microstructural features associated with directed energy deposition of 304L stainless steels, their stability, and their influences on flow strength were examined. These were (1) high dislocation density comparable with deformed materials, (2) increased ferrite content, (3) local chemical heterogeneity, and (4) tortuous grain morphology. In situ neutron diffraction measurements were used to monitor the evolution of the as-built microstructure during post-build heat treatment and relate the specific microstructural features to the strength behavior of the material following the heat treatment. The increased flow strength of the additively manufactured material relative to wrought counterparts is found to be due primarily to an increased dislocation density in the as-built material. However, the increased dislocation density does not completely account for the increased strength and it is hypothesized that some of the additional strength is related to the unique AM grain structure.

36 MATERIALS SCIENCE↗

On the three-dimensional spatial correlations of curved dislocation systems

Abstract Coarse-grained descriptions of dislocation motion in crystalline metals inherently represent a loss of information regarding dislocation-dislocation interactions. In the present work, we consider a coarse-graining framework capable of re-capturing these interactions by means of the dislocation-dislocation correlation functions. The framework depends on a convolution length to define slip-system-specific dislocation densities. Following a statistical definition of this coarse-graining process, we define a spatial correlation function which will allow the arrangement of the discrete line system at two points—and thus the strength of their interactions at short range—to be recaptured into a mean field description of dislocation dynamics. Through a statistical homogeneity argument, we present a method of evaluating this correlation function from discrete dislocation dynamics simulations. Finally, results of this evaluation are shown in the form of the correlation of dislocation densities on the same slip-system. These correlation functions are seen to depend weakly on plastic strain, and in turn, the dislocation density, but are seen to depend strongly on the convolution length. Implications of these correlation functions in regard to continuum dislocation dynamics as well as future directions of investigation are also discussed.

Anderson, Joseph Pierre (ORCID:0000000329760903)↗

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

In this experiment, the origin of dislocation structures in AM stainless steels was systematically investigated by controlling the effect of thermal stress through geometric constraints for the first time. Stainless steel 316L parts were produced in the form of “1D” rods, “2D” walls, and "3D" rectangular prisms to evaluate the effect of constraints to thermal expansion/shrinkage on the development of defect microstructures and to elucidate the origin of additively manufactured (AM) dislocation microstructures. Dislocation density, organization, chemical micro-segregation, precipitate structures, and misorientations were analyzed as a function of increasing constraints around solidifying material in 1D, 2D, and 3D components built using both directed energy deposition (DED) and powder-bed selective laser melting (SLM). In DED parts, the dislocation density was not dependent on local misorientations or micro-segregation patterns, but evolved from approximately ρ ⊥ = 10 12 m -2 in 1D parts to ρ ⊥ = 10 14 m -2 in 3D parts, indicating that it is primarily thermal distortions that produce AM dislocation structures. In DED 3D parts and SLM parts, dislocation densities were highest (ρ ⊥ ≈ 10 14 m -2 ) and corresponded to the formation of dislocation cells approximately 300-450 nm in diameter. Dislocation cells overlapped with dendrite micro-segregation in some but not all cases. The results illustrate that dendritic micro-segregation, precipitates, or local misorientations influence how the dislocations organize during processing, but are not responsible for producing the organized cell structures. Furthermore, this work shows that AM dislocation structures originate due to thermal distortions during printing, which are primarily dictated by constraints surrounding the melt pool and thermal cycling.

36 MATERIALS SCIENCE↗

Martensitic microstructural transformations from the hot stamping, quenching and partitioning process

Hot stamping, which combines forming and quenching in one process, produces high strength steels with limited ductility because the quenching is uncontrolled. A new processing technique has been proposed in which the hot stamping step is followed by a controlled quenching and partitioning process, producing a microstructure containing retained austenite and martensite. To investigate this microstructure, specimens were heated at a rate of 10 deg. C/s to the austenitizing temperature of 900 deg. C, held for 5 min to eliminate thermal gradients, and cooled at a rate of 50 deg. C/s to a quenching temperature of 300 deg. C, which is between the martensite start temperature and the martensite finish temperatures. The resulting microstructure was examined using optical microscope, scanning electron microscopy and transmission electron microscopy. The material produced contains irregular, fragmented martensite plates, a result of the improved strength of the austenite phase and the constraints imposed by a high dislocation density. - Research Highlights: {yields} A novel heat treatment of advanced high strength steels is proposed. {yields} The processing technique is hot stamping plus quenching and partitioning process. {yields} The material produced contains irregular, fragmented martensite plates. {yields} The reason is strength of austenite phase and constraint of dislocation density.

36 MATERIALS SCIENCE↗

Trade-off between morphology, extended defects, and compositional fluctuation induced carrier localization in high In-content InGaN films

We elucidate the role of growth parameters (III/N flux ratio, temperature T{sub G}) on the morphological and structural properties, as well as compositional homogeneity and carrier localization effects of high In-content (x(In) > 0.75) In–polar InGaN films grown by plasma–assisted molecular beam epitaxy (PAMBE). Variations in III/N flux ratio evidence that higher excess of In yields higher threading dislocation densities as well as larger compositional inhomogeneity as measured by x-ray diffraction. Most interestingly, by variation of growth temperature T{sub G} we find a significant trade-off between improved morphological quality and compositional homogeneity at low–T{sub G} (∼450–550 °C) versus improved threading dislocation densities at high–T{sub G} (∼600–630 °C), as exemplified for InGaN films with x(In) = 0.9. The enhanced compositional homogeneity mediated by low–T{sub G} growth is confirmed by systematic temperature-dependent photoluminescence (PL) spectroscopy data, such as lower PL peakwidths, >5× higher PL efficiency (less temperature-induced quenching) and a distinctly different temperature-dependent S-shape behavior of the PL peak energy. From these, we find that the carrier localization energy is as low as ∼20 meV for low–T{sub G} grown films (T{sub G} = 550 °C), while it rises to ∼70 meV for high–T{sub G} grown films (T{sub G} = 630 °C) right below the onset of In–N dissociation. These findings point out that for the kinetically limited metal-rich PAMBE growth of high In-content InGaN a III/N flux ratio of ∼1 and low-to-intermediate T{sub G} are required to realize optically more efficient materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coupled elasticity, plastic slip, and twinning in single crystal titanium loaded by split-Hopkinson pressure bar

Here coupled elasticity, plastic slip, and twinning in high-purity single crystal titanium loaded by split-Hopkinson pressure bar (SHPB) are investigated, in the framework of large deformation and by utilizing the finite element method (FEM). A thermodynamically consistent system of equations for combined plastic slip and twinning is formulated. Novel kinematics is proposed to develop the driving forces for slip and twinning processes and to consider plastic slip in twins. Dislocation based crystal plasticity is proposed, with an emphasis on the interactions among all slip modes in multi-variant/multiphase heterogeneous materials. A mechanism for dislocation density evolution during twinning is proposed. The impact loading along the [0001] and [1$0\bar{1}$1] directions of single crystal high purity titanium is investigated. The evolution of stress-strain field, dislocation density, and volume fraction for each variant in the sample during the entire loading process are obtained and discussed in detail. Results in simulations show that for the [0001] specimen due to the existence of six symmetry primary twin variants with respect to the loading direction and fifteen different slip systems in each variant, the fields of stress and dislocation density are very homogenous in the sample. The simulation results are compared with experimental data for the [0001] and [1$0\bar{1}$1] specimens. The experimental results are explained and interpreted for both specimens, which include the pole figures, the stress-strain curves, and volume fraction of variants. The simulation results provide an important insight into mechanical responses of high-purity single crystal titanium under high rate loading, and this paper advances the mesoscale modeling and simulations in coupled plastic slip and twinning.

36 MATERIALS SCIENCE↗

Structural anisotropic properties of a-plane GaN epilayers grown on r-plane sapphire by molecular beam epitaxy

Heteroepitaxial non-polar III-Nitride layers may exhibit extensive anisotropy in the surface morphology and the epilayer microstructure along distinct in-plane directions. The structural anisotropy, evidenced by the “M”-shape dependence of the (112{sup ¯}0) x-ray rocking curve widths on the beam azimuth angle, was studied by combining transmission electron microscopy observations, Raman spectroscopy, high resolution x-ray diffraction, and atomic force microscopy in a-plane GaN epilayers grown on r-plane sapphire substrates by plasma-assisted molecular beam epitaxy (PAMBE). The structural anisotropic behavior was attributed quantitatively to the high dislocation densities, particularly the Frank-Shockley partial dislocations that delimit the I{sub 1} intrinsic basal stacking faults, and to the concomitant plastic strain relaxation. On the other hand, isotropic samples exhibited lower dislocation densities and a biaxial residual stress state. For PAMBE growth, the anisotropy was correlated to N-rich (or Ga-poor) conditions on the surface during growth, that result in formation of asymmetric a-plane GaN grains elongated along the c-axis. Such conditions enhance the anisotropy of gallium diffusion on the surface and reduce the GaN nucleation rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integrating AlGaN/GaN high electron mobility transistor with Si: A comparative study of integration schemes

AlGaN/GaN high electron mobility transistor stacks deposited on a single growth platform are used to compare the most common transition, AlN to GaN, schemes used for integrating GaN with Si. The efficiency of these transitions based on linearly graded, step graded, interlayer, and superlattice schemes on dislocation density reduction, stress management, surface roughness, and eventually mobility of the 2D-gas are evaluated. In a 500 nm GaN probe layer deposited, all of these transitions result in total transmission electron microscopy measured dislocations densities of 1 to 3 × 10{sup 9}/cm{sup 2} and <1 nm surface roughness. The 2-D electron gas channels formed at an AlGaN-1 nm AlN/GaN interface deposited on this GaN probe layer all have mobilities of 1600–1900 cm{sup 2}/V s at a carrier concentration of 0.7–0.9 × 10{sup 13}/cm{sup 2}. Compressive stress and changes in composition in GaN rich regions of the AlN-GaN transition are the most effective at reducing dislocation density. Amongst all the transitions studied the step graded transition is the one that helps to implement this feature of GaN integration in the simplest and most consistent manner.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Monte Carlo Simulations of 347H Stainless Steel Aging for the Synthetic Generation of Microstructures Under Creep Conditions

Here, a Monte Carlo simulation method capable of replicating the kinetics of M 23 C 6 precipitation in 347H stainless steels was developed for the purpose of producing synthetic microstructures that approximate its microstructural evolution under aging periods of up to 10,000 hours at temperatures between 600 °C and 750 °C. To accomplish this, experimental data from the literature was used to parameterize simulations and replicate the nucleation and growth kinetics of M 23 C 6 particles within 347H and similar austenitic stainless steel alloys. These simulations were found to have considerable fidelity to previous efforts to study the precipitation of M 23 C 6 in other 300 series stainless steel alloys. Synthetic 347H microstructures were then generated that accounted the effects of aging temperature, duration, dislocation density, and the presence of boron within the microstructure. These simulations predict several key trends, those being that (1) the size of M 23 C 6 precipitates decreased with aging temperature and (2) the growth rate of M 23 C 6 particles decreased with aging temperature. Further, while (3) the addition of dislocation density due to creep conditions resulted in increasing intragranular nucleation of M 23 C 6 precipitates with increasing dislocation density and (4) B additions within the microstructure led to modest increases in precipitate size above 700 °C, which indicates that more complex physics are necessary to account for the presence of B.

36 MATERIALS SCIENCE↗