Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation glide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A critical dislocation velocity for serration mechanism transition in a nickel-chromium solid solution alloy

Here, the influence of strain rate across three orders of magnitude (1.70 × 10 –5 /s to 1.43 × 10 –2 /s) along with the effect of the plastic strain accumulation (up to 10%) on the serrated plastic flow were investigated in the nickel-chromium (Ni-Cr) solid solution alloy Nimonic 75 by performing constant-strain-rate tension testing at 600 °C. As the strain rate decreased, the critical strain for the onset of serrations transitioned from normal behavior to inverse behavior. The serrated flow was characterized as Type A+B serration at high strain rate (1.43 × 10 –2 /s). In the intermediate strain-rate regime (1.43 × 10 –3 /s and 1.45 × 10 –4 /s), Type B serrations were observed and followed by a transformation to Type C+B serrations. At the low strain rate (1.70 × 10 –5 /s), the plastic flow immediately displayed Type C serrations, which later evolved into Type C+B serrations. Regardless of the strain rate, plastic strain, or dislocation density, a critical dislocation velocity falling in the range of 1.2 × 10 –6 – 2.2 × 10 –6 m/s was identified to signify the onset of Type C serration, whereby the mobile dislocations break free from the solute cloud for short bursts of deformation. Finally, a novel model by solute rearrangement across dislocation cores was used to understand how the critical dislocation velocity is quantitatively determined by the rate at which solute atoms are able to hop across the glide plane as a partial dislocation core moves through the lattice.

36 MATERIALS SCIENCE↗

The revised elastic field of an edge dislocation

We modify the traditional linear-elastic field of an edge dislocation. The modifications stem from symmetry and energy requirements imposed in terms of embedded (deformed) coordinates. These requirements are satisfied if a line force is added to the dislocation field. The modification to the stress field is expressed by coefficients that are a function only of Poisson’s ratio. Qualitatively, the field of the dislocation is increased in the glide direction and decreased in the climb direction. There are small changes to the field of a screw dislocation that do not entail the addition of a line force. Effects of nonlinearity, anisotropic elasticity, and image forces are briefly considered.

Hirth, J. P.↗

Two-step deformation-induced martensitic transformation in additively manufactured High-Si stainless steel

Deformation-induced phase transformation in the additively manufactured (AM) Fe–18Cr–8Ni-5.5Si (in wt.%) alloy was analyzed using the in-situ electron backscattered diffraction (EBSD) record during uniaxial tensile testing in a scanning electron microscope (SEM). Analysis of EBSD data was focused to investigate phase transformation behavior during deformation with consideration of mechanical interactions among phases and grains in the ultrafine AM microstructure. The initial EBSD phase map illustrated that the as-built microstructure was a duplex structure consisting of major austenite (γ) and minor ferrite phases, some of which showed non-traditional orientation relationship since the rapid solidification in the AM process has produced non-equilibrium state in phase formation. In the deformed as-built AM alloy, the two-step martensitic transformation (γ→ε→α´) was identified as the main deformation-induced transformation mechanism. Martensitic transformation steps were found to be associated with glides of Shockley partial dislocations on closed packed (111) planes under the influence of atomic disturbance in the γ and ε phases, respectively. Using the closed-packed plane pole figures and unit cell orientations, their evolutions and mechanisms accompanying with the transformation were analyzed. Finally, the results indicate that one variant of ε-martensite forms from their parent γ phase, while two variants of α´ form from their parent ε phase.

36 MATERIALS SCIENCE↗

In situ observation of shear-driven amorphization in silicon crystals

Amorphous materials have attracted great interest in the scientific and technological fields. An amorphous solid usually forms under the externally driven conditions of melt-quenching, irradiation and severe mechanical deformation. However, its dynamic formation process remains elusive. Here we report the in situ atomic-scale observation of dynamic amorphization processes during mechanical straining of nanoscale silicon crystals by high resolution transmission electron microscopy (HRTEM). We observe the shear-driven amorphization (SDA) occurring in a dominant shear band. The SDA involves a sequence of processes starting with the shear-induced diamond-cubic to diamond-hexagonal phase transition that is followed by dislocation nucleation and accumulation in the newly formed phase, leading to the formation of amorphous silicon. The SDA formation through diamond-hexagonal phase is rationalized by its structural conformity with the order in the paracrystalline amorphous silicon, which maybe widely applied to diamond-cubic materials. Besides, the activation of SDA is orientation-dependent through the competition between full dislocation nucleation and partial gliding.

Amorphization↗

Growth and stress-induced transformation of zinc blende AlN layers in Al-AlN-TiN multilayers

We report that AlN nanolayers in sputter deposited {111}Al/AlN/TiN multilayers exhibit the metastable zinc-blende-structure (z-AlN). Based on density function theory calculations, the growth of the z-AlN is ascribed to the kinetically and energetically favored nitridation of the deposited aluminium layer. In situ nanoindentation of the as-deposited {111}Al/AlN/TiN multilayers in a high-resolution transmission electron microscope revealed the z-AlN to wurzite AlN phase transformation through collective glide of Shockley partial dislocations on every two {111} planes of the z-AlN.

36 MATERIALS SCIENCE↗

Dislocation decorrelation and relationship to deformation microtwins during creep of a y' precipitate strengthened Ni-based superalloy

The evolution of microtwins during high temperature creep deformation in a strengthened Ni-base superalloy has been investigated through a combination of creep testing, TEM characterization, theoretical modeling and computer simulation. Experimentally, microtwin nucleation sources were identified and their evolution was tracked by characterizing the deformation substructure at different stages of the creep deformation. Initially, deformation is highly localized around stress concentrators such as carbides, borides and serrated grain boundaries, which act as sources of a/2<110> matrix type dislocations. Due to microstructural effects such as fine channels between particles and low matrix stacking fault energies, the a/2<110> matrix dislocations dissociate into a/6<112> Shockley partials, which were commonly observed to be decorrelated from one another, creating extended intrinsic stacking faults in the matrix. As deformation progress further, microtwins form via partial dislocations cooperatively shearing both and phases on adjacent {111} glide planes. The TEM observations lead directly to an analysis of dislocation-precipitate interactions. Through phase field simulations and theoretical analysis based on Orowan looping, the important processes of dislocation dissociation and decorrelation are modeled in detail, providing comprehensive insight into the microstructural features and applied stress conditions that favor the microtwinning deformation mode in strengthened Ni-based superalloys.

36 MATERIALS SCIENCE↗

Incoherent twin boundary migration induced by ion irradiation in Cu

Grain boundaries can act as sinks for radiation-induced point defects. The sink capability is dependent on the atomic structures and varies with the type of point defects. Using high-resolution transmission electron microscopy, we observed that {Sigma}3{l_brace}112{r_brace} incoherent twin boundary (ITB) in Cu films migrates under Cu{sup 3+} ion irradiation. Using atomistic modeling, we found that {Sigma}3{l_brace}112{r_brace} ITB has the preferred sites for adsorbing interstitials and the preferential diffusion channels along the Shockley partial dislocations. Coupling with the high mobility of grain boundary Shockley dislocations within {Sigma}3{l_brace}112{r_brace} ITB, we infer that {Sigma}3{l_brace}112{r_brace} ITB migrates through the collective glide of grain boundary Shockley dislocations, driven by a concurrent reduction in the density of radiation-induced defects, which is demonstrated by the distribution of nearby radiation-induced defects.

36 MATERIALS SCIENCE↗

Void growth by dislocation adsorption

Here, we propose a dislocation adsorption-based mechanism for void growth in metals, wherein a void grows as dislocations from the bulk annihilate at its surface. The basic process is governed by glide and cross-slip of dislocations at the surface of a void. Using molecular dynamics simulations we show that when dislocations are present around a void, growth occurs more quickly and at much lower stresses than when the crystal is initially dislocation-free. Finally, we show that adsorption-mediated growth predicts an exponential dependence on the hydrostatic stress, consistent with the well-known Rice-Tracey equation.

36 MATERIALS SCIENCE↗

Cross-slip and easy-glide CRSS in titanium: Theoretical predictions and in-situ TEM measurements

This study investigates the mechanics of prismatic and first-order pyramidal $\langle$a$\rangle$ slip in titanium (Ti), elucidating the physics of easy-glide and cross-slip through a combination of theory and experiments. Screw-character prismatic (Pr) dislocations in Ti are of particular interest because their complex cores can be stable or unstable, leading to activation by either cross-slip or planar glide. To investigate these mechanisms, site-specific micro tensile samples were prepared using focused ion beam (FIB) milling and mounted on a push-to-pull (PTP) device for in-situ transmission electron microscopy (TEM) tensile testing. The in-situ experiments provide direct observations of the onset of dislocation motion and the precise determination of the critical resolved shear stress (CRSS) for the activated mechanisms, and its evolution with load cycling. A comprehensive theory has been developed to predict the CRSS values for easy glide, cross-slip, and multiplication of dislocations. Predicted critical stresses for pyramidal (π)-to-Pr and reverse cross-slip agree closely with the experimental measurements. The latter cross-slip stress is a factor of two higher than that of unobstructed planar slip. The model accounts for overlapping dislocation cores and employs a Wigner-Seitz based cell to evaluate misfit energies. By combining ab initio density functional theory (DFT) with anisotropic elasticity, the framework identifies minimum energy pathways for dislocation glide, which can be intermittent and zig-zag. A simplified expression utilizing (π) and Pr Schmid factor ratios is proposed for critical stress corresponding to (π)-to-Pr cross-slip transition. The results are strongly dependent on crystal orientation, underscoring non-Schmid behavior. Overall, this study explores key critical stress parameters essential for informing higher-scale simulations of plasticity in Ti.

Critical stress↗

Energetics of the nucleation and glide of disconnection modes in symmetric tilt grain boundaries

Grain boundaries (GBs) evolve by the nucleation and glide of disconnections, which are dislocations with a step character. In this work, motivated by recent success in predicting GB properties such as the shear coupling factor and mobility from the intrinsic properties of disconnections, we develop a systematic method to calculate the energy barriers for the nucleation and glide of individual disconnection modes under arbitrary driving forces and a quasi-2D setting. This method combines tools from bicrystallography to enumerate disconnection modes and the Nudged elastic band (NEB) method to calculate their energetics, yielding minimum energy paths and atomistic mechanisms for the nucleation and glide of each disconnection mode. We apply the method to accurately predict shear coupling factors of $[001]$ symmetric tilt grain boundaries in Cu. Particular attention is paid to the boundaries where the dislocation-based disconnection nucleation model produces incorrect nucleation barriers. We demonstrate that the method can accurately compute energy barriers and predict shear-coupling factors in the low-temperature regime. For certain disconnection modes in which the assumptions underlying our method do not hold, we report upper bounds on the energy barriers for disconnection nucleation and glide. In addition, the NEB trajectories reveal interesting phenomena such as the dissociation of a higher energy mode into lower energy modes, and in some cases, shear coupling being mediated by partial disconnections, wherein the GB structure temporarily changes to a metastable state before reverting back to its original structure. Graphical abstract

36 MATERIALS SCIENCE↗

A TEM Study of Creep Deformation Mechanisms in Allvac 718Plus

A preliminary study on the evolution of creep deformation substructure in Ni-base superalloy Allvac 718Plus has been performed. Specimens crept at 620 MPa and at temperatures ranging from 690-732 C were examined utilizing diffraction contrast TEM characterization techniques. Creep was interrupted at 1-2.5% strain in order to study the deformation substructure following a limited amount of deformation. The dominant deformation modes at each of the test temperatures were highly planar in nature and involved shearing of the matrix and precipitates on {111} glide planes. In addition, paired a/2<110> dislocations were evident which suggest an antiphase boundary shearing mechanism. Creep induced microtwinning was also observed at the highest creep temperature which was created by identical a/6<112> Shockley partial dislocations that shear the matrix and precipitates on consecutive close packed {111} glide planes.

36 MATERIALS SCIENCE↗

Competing Processes in Reactions between an Edge Dislocation and Dislocation Loops in a Body-Centred Cubic Metal

Molecular dynamics simulation was used to investigate reactions of a 1/2<111>{l_brace}110{r_brace} edge dislocation with interstitial dislocation loops of 1/2<111> and <100> type in a model of iron. Whether loops are strong or weak obstacles depends not only on loop size and type, but also on temperature and dislocation velocity. These parameters determine whether a loop is absorbed on the dislocation or left behind as it glides away. Absorption requires glide of a reaction segment over the loop surface and cross-slip of dipole dislocation arms attached to the ends of the segment: these mechanisms depend on temperature and strain rate, as discussed here.

36 MATERIALS SCIENCE↗

Interaction of an edge dislocation with voids in alpha-iron modelled with different interatomic potentials

voids in -iron have been investigated by means of molecular dynamics with a recently developed interatomic potential (Ackland et al 2004 J. Phys.: Condens. Matter 16 S2629) and compared with those obtained earlier with an older potential (Ackland et al 1997 Phil. Mag. A 75 713). Differences between the interactions for the two models are insignificant at temperature T 100 K, thereby confirming the validity of the previous results. In particular, voids are relatively strong obstacles because for large voids and/or low temperature, the initially straight edge dislocation is pulled into screw orientation before it breaks away at the critical shear stress, c. Differences between the core structures and glide planes of the 1/2111 screw dislocation for the two potentials do not affect c in this temperature range. The only significant difference between the dislocation void interactions in the two models occurs at low temperature in static or pseudo-static conditions (T 1 K). It arises from the influence of the dislocation segment in the 70 -mixed orientation with the (Ackland et al 2004 J. Phys.: Condens. Matter 16 S2629) potential and is seen in the critical line shape at which the dislocation breaks from the void. It affects c for some combinations of void size and spacing. The effect on the line shape does not arise from anisotropy of the elastic line tension: it is due to the high Peierls stress of the 70 dislocation. When this effect does not control breakaway, the dependence of c on void size and spacing follows an equation first found by modelling the Orowan process in the approximation of linear elasticity.

Terentyev, D↗

Metastability and relaxation in tensile SiGe on Ge(001) virtual substrates

We systematically study the heteroepitaxy of SiGe alloys on Ge virtual substrates in order to understand strain relaxation processes and maximize the tensile strain in the SiGe layer. The degree of relaxation is measured by high-resolution x-ray diffraction, and surface morphology is characterized by atomic force microscopy. The results are analyzed in terms of a numerical model, which considers dislocation nucleation, multiplication, thermally activated glide, and strain-dependent blocking. Relaxation is found to be sensitive to growth rate and substrate temperature as well as epilayer misfit and thickness, and growth parameters are found which allow a SiGe film with over 4 GPa of tensile stress to be obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of highly strained CeO 2 ultrathin films

Large biaxial strain is a promising route to tune the functionalities of oxide thin films. However, large strain is often not fully realized due to the formation of misfit dislocations at the film/substrate interface. In this work, we examine the growth of strained ceria (CeO 2 ) thin films on (001)-oriented single crystal yttria-stabilized zirconia (YSZ) via pulsed-laser deposition. By varying the film thickness systematically between 1 and 430 nm, we demonstrate that ultrathin ceria films are coherently strained to the YSZ substrate for thicknesses up to 2.7 nm, despite the large lattice mismatch (~5%). The coherency is confirmed by both X-ray diffraction and high-resolution transmission electron microscopy. This thickness is several times greater than the predicted equilibrium critical thickness. Partial strain relaxation is achieved by forming semirelaxed surface islands rather than by directly nucleating dislocations. In situ reflective high-energy electron diffraction during growth confirms the transition from 2-D (layer-by-layer) to 3-D (island) at a film thickness of ~1 nm, which is further supported by atomic force microscopy. We propose that dislocations likely nucleate near the surface islands and glide to the film/substrate interface, as evidenced by the presence of 60° dislocations. Finally, an improved understanding of growing oxide thin films with a large misfit lays the foundation to systematically explore the impact of strain and dislocations on properties such as ionic transport and redox chemistry.

36 MATERIALS SCIENCE↗

Elastic Properties and Deformation Mechanisms in the van der Waals Single-Crystalline Indium Selenide

The bulk van der Waals (vdW) single-crystalline indium selenide (β-InSe) displays exceptional plasticity in a layered crystalline form at both micro- and macroscale. However, the nanoscale origin of plasticity remains unclear. Herein, an atomic-level study on the deformation mechanisms of InSe by using first-principles calculations is reported. Remarkable anisotropic elasticity is observed in the vdW InSe layered crystal, and the stiffness is dramatically softened because of the vdW gap in the layered structure. The simulations capture the distinct fracture modes in the uniaxial tensile deformation, depending on the loading directions—brittle fracture in the [100] and [110] directions while ductile failure in the [001] direction. The InSe layered crystal structure exhibits superplastic deformability under uniaxial compression. Different transition pathways, including interlayer tangling, amorphization, and cross-linking, are tracked along respective deformation directions. The unprecedented plasticity of InSe layered crystals can be attributed to the phase transition coupled with interlayer gliding and cross-layer dislocation slipping. Here, this study deepens our understanding of the deformation mechanisms of layered materials at the atomistic level and provides insights into tailoring material properties for low-dimensional material design based on its deformation mechanisms.

2D materials↗

Correlation of Early-Stage Growth Process Conditions with Dislocation Evolution in MOCVD-Based GaP/Si Heteroepitaxy

To identify the complex relationships between early-stage growth processes and the resultant defect microstructure in GaP/Si heteroepitaxy, a holistic study of several key metal-organic chemical vapor deposition (MOCVD) parameters was conducted, focusing on Si surface preparation and GaP atomic layer epitaxy (ALE) based nucleation processes. Here, crystalline defects related to the lattice mismatch and/or interfacial heterovalency, namely misfit dislocations (MD), threading dislocations (TD), and stacking fault pyramids (SFP), were quantitatively characterized via electron channeling contrast imaging (ECCI) and correlated against the different process variations. Choice of Si surface preparation method between the two examined (dilute SiH4 annealing versus Si2H6 based homoepitaxy) had little impact on resultant GaP film morphology and defect content, whereas differing GaP ALE nucleation conditions produced much more substantial changes. In particular, the initial precursor species (tert-butylphosphine versus triethygallium) and ALE cycle purge times both yielded significant influence over threading dislocation densities (TDD) in thin (100 nm), post-critical thickness GaP/Si films, with TDD spanning two orders of magnitude, from 6.7×10 7 cm -2 to 7.1×10 5 cm -2 , depending on the specific process conditions employed. SFP densities were also found to follow a similar trend, ranging from 2.0×10 7 cm -2 to 1.8×10 5 cm -2 , but with no apparent causal relationship between SFP density and TDD. To help explain the dramatic differences observed, detailed, large-area MD network characterization was used to provide statistically-relevant quantitative analyses of the critical dislocation dynamics (introduction rates and glide velocities) associated with the different process variants. These extracted values are then correlated against the ALE process variants to provide insight into the potential mechanistic roles of the different growth processes.

36 MATERIALS SCIENCE↗