SEARCH · Search NASA

Results for “dry processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2026

High-Resolution WRF-Based Downscaling of Earth System Model Projections for Energy Applications across CONUS

Evaluating energy resources under future scenarios requires meteorological information that adequately resolves regional-scale variability and is suitable for regional energy system studies. Although Earth system model (ESM) outputs provide essential large-scale context, their coarse resolution and inherent biases limit direct use in energy system applications. This work presents a high-resolution dynamical downscaling framework using the Weather Research and Forecasting (WRF) model to generate energy-relevant regional fields for future scenarios over the contiguous United States (CONUS). The framework first identifies an optimal WRF configuration through sensitivity experiments, then evaluates raw and bias-corrected ESM initial and boundary conditions, with soil moisture and soil temperature bias correction implemented as an integral component of the bias-corrected ESM atmospheric forcing prior to WRF dynamical downscaling to improve land-atmosphere interactions. Simulations performed at 4-km resolution show that uncorrected ESM forcing leads to systematically dry and cold soil states, which propagate into elevated near-surface air temperature and solar irradiance biases, particularly during summer for the period 2000-2014. Incorporating bias-corrected atmospheric forcing together with soil state bias correction substantially reduces these errors and improves the representation of surface energy processes in WRF simulations. The results highlight the importance of bias-aware initialization strategies in high-resolution dynamical downscaling for future energy system analysis and planning.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

Effect of pattern transfer process on roughness of block copolymer patterns from directed self-assembly

Block copolymer-directed self-assembly (DSA) remains promising for improving pattern quality and reducing the stochastic variations that challenge high numerical aperture extreme ultraviolet lithography. Equally critical is refining pattern transfer methods for accurately transferring the rectified DSA features to the underlying substrate. We compare two atomic layer deposition (ALD)-based techniques: sequential infiltration synthesis (SIS) and dry liftoff, applied to polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) DSA patterns. Both methods utilize aluminum oxide hard masks, with one synthesized through infiltration into the PMMA domains and the other through conformal ALD coating. High-resolution scanning electron micrographs were analyzed to measure line edge, width, and placement roughness for both the line (PMMA) and space (PS) features. Although both methods yielded similar overall 3σ rms roughness, they differed significantly in the frequency-dependent power spectral density (PSD) profiles. SIS reduced line placement roughness at length scales associated with the polymer pitch, but increased space width roughness at low frequencies, whereas dry liftoff mimicked the frequency content of the original guiding pattern. This study underscores the importance of PSD evaluation in selecting optimal pattern transfer strategies for specific applications.

Block copolymers↗

DOE OSTI2026

Carbon Capture Pilot at Dry Fork Power Station (Final Technical Report)

The objective of this project was to design, seek necessary approvals, build and operate a large-scale pilot sorbent-based post combustion carbon capture system (CCS) at a coal fired power generation facility. TDA’s CCS uses a highly stable, low-cost, high-capacity physical adsorbent to effectively remove CO 2 via a combination vacuum and concentration swing adsorption (VCSA) process. The CCS is integrated with the power plant flue gas exhaust, which is rich in CO 2 (~13% vol. CO 2 ) and removes more than 90% of the plant’s overall carbon emissions.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Evaluating Autoxidation Radical Scavengers and Additives to Enhance Aminopolymer Sorbent Stability

Solid amine sorbents have shown promise in the removal of ultradilute CO 2 from the atmosphere. Despite being a promising candidate material type for this application, these sorbents are prone to degradation during long-term exposure to environmental components such as CO 2 , O 2 , and H 2 O, with amine oxidation being a particularly challenging problem. In this study, we investigate the potency of different radical scavengers and additives in mitigating the degradation of a model poly- (ethylenimine) (PEI)/Al 2 O 3 sorbent under direct air capture (DAC)-relevant conditions. The results reveal that a 4,4′-bis(α,α- dimethylbenzyl)diphenylamine (BDDPA)-incorporated PEI/Al 2 O 3 sorbent showed the most resistance toward oxidative degradation at varying exposure times and BDDPA loadings under CO 2 -free air (21% O 2 /balance N 2 ) at 120 °C. Interestingly, under humid (∼43% relative humidity (RH) at 26 °C) and dry 0.04% CO 2 -air, the BDDPA/PEI/Al 2 O 3 sorbent showed enhanced sorbent stability both at 70 and 120 °C after 4.5 h of exposure. Under humid CO 2 -free air, at 120 °C, the antioxidant performance slightly declined (in comparison to the dry CO 2 -free air condition) but displayed a much higher stability than the pristine sorbent. Overall, the ability of BDDPA to inhibit sorbent degradation under dry and humid, CO 2 -free and CO 2 -containing (0.04%) air at intermediate (70 °C) and elevated (120 °C) temperatures is promising in prolonging sorbent stability and underscores the importance of performing accelerated oxidation studies in the presence of all species that are expected to be present in DAC processes to identify suitable stabilization treatments for sorbent materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Biogeochemical and community ecology responses to the wetting of non-perennial streams

Transitions between dry and wet hydrologic states are the defining characteristic of non-perennial rivers and streams, which constitute the majority of the global river network. Although past work has focused on stream drying characteristics, there has been less focus on how hydrology, ecology and biogeochemistry respond and interact during stream wetting. Wetting mechanisms are highly variable and can range from dramatic floods and debris flows to gradual saturation by upwelling groundwater. This variation in wetting affects ecological and biogeochemical functions, including nutrient processing, sediment transport and the assembly of biotic communities. Here, in this work, we synthesize evidence describing the hydrological mechanisms underpinning different types of wetting regimes, the associated biogeochemical and organismal responses, and the potential scientific and management implications for downstream ecosystems. This combined multidisciplinary understanding of wetting dynamics in non-perennial streams will be key to predicting and managing for the effects of climate change on non-perennial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Precision Plant Biomass Characterization in Agriculture: Harnessing Machine Learning and Hyperspectral Imaging [Slides]

Efficient Biomass Separation Object detection of anatomical parts (Cob, Stalk, Husk) in IR images enables precise separation, improving preprocessing (e.g., drying, grinding) for biofuel production. Detailed Biomass Characterization with Hyperspectral Data Hyperspectral imaging captures spectral signatures of biomass, allowing for the identification of specific traits like moisture content, lignin levels, and nutrient composition, leading to optimized treatments for each biomass part. Enhanced Feedstock Quality By leveraging hyperspectral data, feedstock can be processed based on its chemical composition, improving conversion efficiency and biofuel yield. Automation for Large-Scale Operations Automated object detection and hyperspectral data analysis reduce manual labor, ensuring accurate sorting and faster processing, making large-scale biofuel production more efficient. Maximized Biomass Utilization Accurate identification of biomass properties minimizes waste and ensures that each part is processed according to its highest biofuel potential.

09 BIOMASS FUELS↗

DOE OSTI2024

Two-dimensional heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from Populus trichocarpa residues after CELF pretreatment and CBP fermentation

Here we present a curated dataset of a series of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a woody energy crop (Populus trichocarpa) residues after co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment and consolidated bioprocessing (CBP) process. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve. The CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with 15, 25 and 30 minutes, respectively. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. The residues from CELF pretreatment were then subjected to CBP using the bacterium C. thermocellum DSM 1313. CBP fermentations were performed at 60 °C in a shaker at 50 grams/L solids loadings. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The lignin samples were characterized using 13C–1H HSQC experiments which were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus. A standard Bruker pulse sequence was used on a Prodigy platform cryoprobe. The dry lignin samples were dissolved in deuterated dimethylsulfoxide for HSQC experiments. The spectra were acquired under the following acquisition conditions: 210 ppm spectral width in F1 (13C) dimension with 256 data points and 11 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. All the data was processed using the TopSpin 3.6 software (Bruker BioSpin). The NMR spectra provides structural characteristics information about lignin remaining in solids after CELF (150 °C with 15, 25 and 30 minutes) process and C. thermocellum CBP.

Lignin structure, HSQC, poplar, CELF, CBP, CBI↗

DOE OSTI2026

Not all fugitives are bad: The case for using them to form low tortuosity - high porosity electrodes

This work focuses on the inclusion of an insoluble fugitive phase during slurry processing to form composite battery electrodes. The fugitive phases consist of natural derived products like alginic acid, sucrose, rice and potato starch, and carrageenans such as Irish Moss and synthetic pore-formers based on polymethyl methacrylate. The fugitive phases can be anaerobically thermally removed (350 °C) during binder crosslinking and electrode drying steps, resulting in electrodes with low tortuosities (approaching theoretical Bruggemann limits for spherical particles) and high porosities approaching 80%. The resulting ∼3 mg/cm 2 loaded electrodes suffer from poor electrical connectivity, lowering the effective material utilization, but represent an approach that could be utilized for the formation of solid-state batteries with infilling of materials into well-defined pores and optimized transport pathways.

25 ENERGY STORAGE↗

DOE OSTI2024

Understanding spatial and temporal drivers of variation in tree hydraulic processes and their consequences for climate feedbacks (Final Technical Report)

This is the final technical report from the first phase of a project that changed institutions. The grant was titled “Understanding spatial and temporal drivers of variation in tree hydraulic processes and their consequences for climate feedbacks.” The overall objectives of this project were to (1) provide model‐compatible datasets of key plant hydraulic traits and status for model evaluation, parameterization and validation and (2) use these data to pinpoint ecosystem responses to a changing hydroclimate by addressing both long‐term climatic drying and episodic extreme droughts. We planned to address the objectives with three research activities to quantify plant responses to chronic water stress and episodic drought: (1) generate high frequency observations of soil and plant hydraulic data across different landscape positions at multiple sites, (2) quantify plant hydraulic trait plasticity in response to experimental soil moisture reduction in situ in two central hardwood forests, and (3) simulate the carbon consequences of incorporating plant hydrodynamics and plant acclimation to water stress in the DOE‐sponsored plant hydrodynamics model FATES‐HYDRO. As of the transfer of this project to another institution, we had made substantial progress on activities 1 and 2, and started activity 3.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Surfactant templated biogenic nanoporous silica thermal insulation composite

Carbon-sequestration biogenic insulation materials offer a promising solution for sustainable and energy-efficient buildings. However, minimizing energy-intensive manufacturing processes and ensuring a uniform microstructure are essential to achieve widespread application. In this work, we introduce cetyltrimethylammonium bromide (CTAB) surfactant as both synthesis and dispersion template for nanoporous silica to create biogenic straw-based thermal insulation composites. As the amount of nanoporous silica increases to 72 wt%, the elastic insulation composite dried using the solvent exchange method exhibits a density of 0.058 g cm –3 , a thermal conductivity of 30.3 mW m –1 K –1 and a flexural modulus of 3.96 MPa, while demonstrating materials circularity and fire retardance. The use of CTAB surfactant effectively captures nanoporous silica, preventing its loss during manufacturing and enhancing the homogeneity and dispersion of the silica within the composite. In addition, the results show that the ethanol solvent exchange drying at ambient conditions provides the optimum thermal insulation performance with less energy consumption compared to freeze-drying.

36 MATERIALS SCIENCE↗

DOE OSTI2024

The role of annealing and grain boundary controls on the mechanical properties of limestones and marbles

Chemical and mechanical processes are coupled in many geological and geochemical environments. Reactive processes anneal defects and restructure grain boundaries, modifying their elastic properties, levels of internal friction, wave propagation rates and fracture behaviors. The nature of these changes is, however, contingent on the initial state of the rock. Here, in this study, impulse excitation was used to measure changes in mechanical properties as a function of dry and steam heating time at 300 °C for three carbonate rocks: Carrara marble, Carthage marble (Burlington Limestone), and Texas Cream limestone (Edwards limestone), with initial porosities of about 1 %, 3 %, and 27 %, respectively. Frequency-dependent phenomena along with mineral recrystallization were observed. This was coupled with small-angle X-ray and neutron scattering analysis to determine the relationship between changes in bulk mechanical and microstructural properties. An observed decrease in both the Young's and shear moduli in the experimental limestones as a function of heating time reflects and quantifies a reduction in the stiffness of the rock due to annealing. The internal friction of the samples first increases then decreases with reaction time, reflecting defect annealing, but this was balanced against grain boundary dissolution apparently driven by condensation of steam in the confined grain-boundary environment. This suggests an increase in the boiling point under confinement leading to dissolution, increased porosity and widening of the grain boundaries. In addition, comparison of small-angle X-ray and neutron scattering results suggests that it is inappropriate to assume that pores are empty for quantitative analysis of typical small-angle scattering samples.

58 GEOSCIENCES↗

DOE OSTI2026

Data for Optimization of Pre-Commercial Enzymes Dosage for a Potential Lignocellulosic Biorefinery

Lignocellulolytic enzymes remain one of the primary cost constraints in second-generation (2G) ethanol biorefineries. Achieving efficient hydrolysis of structural carbohydrates with minimal enzyme dosage, maintaining slurry fermentability for industrially relevant ethanol titers, and maximizing ethanol yield per ton of biomass are among the major challenges in 2G processes. In this study, we optimized the dosages of pre-commercial cellulase (NS22257) and hemicellulase (NS22244) on pilot-scale, hydrothermally pretreated lignocellulosic substrates. Enzyme dosages were evaluated at three levels: 20 mg of cellulase with 7.25 mg of hemicellulase (ED-1), 40 mg with 14.5 mg (ED-2), and 60 mg with 21.75 mg (ED-3). As expected, the highest sugar yields were obtained with ED-3; however, for sweet sorghum, oilcane, and miscanthus, sugar yields from ED-2 and ED-3 were not significantly different (p < 0.05). For example, sweet sorghum produced 123.78 ± 1.54 g L−1 and 125.76 ± 0.46 g L−1 of total sugars (glucose and xylose) with ED-2 and ED-3, respectively. Although energycane exhibited a statistically significant difference between ED-2 and ED-3, the incremental gain with ED-3 was modest, increasing sugar release by only 9.02 g L−1 relative to ED-2. Importantly, ED-1 resulted in sugar yields of 88.88 ± 3.64 to 106.86 ± 1.21 g L−1, sufficient to achieve ethanol titers ≥40 g L−1, the threshold required for industrial relevance. A semi-integrated bioprocess validated this outcome, producing 42.09 ± 2.38 g L−1 ethanol and an estimated yield of 213.38 L of ethanol per dry ton of pretreated biomass, requiring only 20.83 L of cellulase and 6.25 L of hemicellulase per ton. Remarkably, these enzyme dosages were approximately tenfold lower than those reported in prior studies.

Energycane↗

DOE OSTI2024

Concept Study of Robotic Camera-Based Foreign Object Detection for EV Wireless Charging

Wireless charging of an electric vehicle (EV) is an emerging charging technology promising convenient, autonomous, and highly efficient EV charging without requiring heavy gauge cables. However, due to the strong electromagnetic field created by this process that surrounds the wireless charger, the presence of foreign objects can detrimentally interact with it, thus affecting wireless power transfer (WPT) performance or leading to harmful and unwanted safety risks. This paper presents the results for a concept study on a robotic camera-based foreign object detection (FOD) system, as a supplement to the industry-existing overlapped FOD coil array method, for EV wireless charging. A Raspberry PI 4 control board and compatible Raspberry PI Camera Module 2 are used to implement camera-based object detection. The FOD program was developed using a state-of-the-art deep learning object detection model with the OpenCV and Pytorch library and is compatible with camera module hardware. A dry-run test with Raspberry PI and a camera module was conducted and the preliminary FOD function was verified. The feasibility assessment is also validated by comparing the performance of five existing state-of-the-art deep learning object detection models for vehicles, animals, persons, and metals subsets, respectively. Satisfactory performance on the benchmark datasets is observed by the tests, but further improvements are needed in future work when detecting small-sized metallic objects. A programable robotic car is also under development as ongoing work for carrying the Raspberry PI and camera module while moving for the maintenance process.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

Tuning metal-support interactions in nickel–zeolite catalysts leads to enhanced stability during dry reforming of methane

Ni-based catalysts are highly reactive for dry reforming of methane (DRM) but they are prone to rapid deactivation due to sintering and/or coking. In this study, we present a straightforward approach for anchoring dispersed Ni sites with strengthened metal-support interactions, which leads to Ni active sites embedded in dealuminated Beta zeolite with superior stability and rates for DRM. The process involves solid-state grinding of dealuminated Beta zeolites and nickel nitrate, followed by calcination under finely controlled gas flow conditions. By combining in situ X-ray absorption spectroscopy and ab initio simulations, it is elucidated that the efficient removal of byproducts during catalyst synthesis is conducted to strengthen Ni–Si interactions that suppress coking and sintering after 100 h of time-on-stream. Transient isotopic kinetic experiments shed light on the differences in intrinsic turnover frequency of Ni species and explain performance trends. This work constructs a fundamental understanding regarding the implication of facile synthesis protocols on metal-support interaction in zeolite-supported Ni sites, and it lays the needed foundations on how these interactions can be tuned for outstanding DRM performance.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Preferential adsorption of noble gases in zeolitic tuff with variable saturation: A modeling study of counter-intuitive diffusive-adsorptive behavior

Noble gas transport through geologic media has important applications in the prediction and characterization of measured gas signatures related to underground nuclear explosions (UNEs). Retarding processes such as adsorption can cause significant species fractionation of radionuclide gases, which has implications for measured and predicted signatures used to distinguish radioxenon originating from civilian nuclear facilities or from UNEs. Accounting for the effects of variable water saturation in geologic media on tracer transport is one of the most challenging aspects of modeling gas transport because there is no unifying relationship for the associated tortuosity changes between different rock types, and reactive transport processes such as adsorption that are affected by the presence of water likewise behave differently between gas species. In this study, we perform numerical diffusive-adsorptive transport simulations to estimate gas transport parameters associated with bench-scale laboratory diffusion cell experiments measuring breakthrough in zeolitic and non-zeolitic rocks for a gaseous mixture of xenon, krypton, and SF 6 at varying degrees of water saturation (S w ). Counter-intuitive transport behavior was observed in the zeolitic rock experiments whereby breakthrough concentrations were significantly higher when the core was partially saturated (S w = 17 %) than under dry (S w = 0 %) conditions. Breakthrough of xenon was especially retarded in the dry core – likely due to comparatively high affinity of xenon for zeolitic adsorption sites – and estimated effective diffusion coefficients for all gases were approximately an order of magnitude lower than what is predicted by porosity-tortuosity models. We propose the counter-intuitive behavior observed is because water infiltration of zeolite nanopores reduces both the adsorptive capacity of the rock and the tortuosity of connected flow paths. We developed a two-site competitive kinetic Langmuir adsorption reaction for the porous media transport simulator in order to constrain transport parameters within zeolitic tuff, where differential adsorption to zeolite and non-zeolite pores was observed. We determined that liquid saturation-dependent diffusive-adsorptive transport is affected by subtle and at times competing processes that are specific to different gases, which have a significant overall influence on effective transport parameters.

58 GEOSCIENCES↗

DOE OSTI2024

Heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from switchgrass residues after fermentation with milling

Here we present a curated dataset of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a herbaceous energy crop (Panicum virgatum L.). The lowland variant “Timber” switchgrass from Ernst seeds was used. The switchgrass was knife milled and passed through a 2 mm sieve prior to consolidated bioprocessing (CBP) process. Switchgrass was suspended in Milli-Q water and autoclaved for 90 min on liquid cycles. The residues after autoclaving were then subjected to CBP using coculture of Clostridium thermocellum (C. thermocellum DSM 1313 (LL1004)) and Thermoanaerobacterium thermosaccarolyticum ( T. thermosaccharolyticum HG-8 ATCC 31960 (LL1244)). Once-fermented and twice-fermented (FF) switchgrass were subjected to ball and disc milling in bioreactors at 55 °C and 60, 48 grams/L solids loadings for primary and secondary fermentation respectively. When fermentations were completed, the residual solids were rinsed with milli-Q water. Lignin was isolated from the pretreated residues after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 600 rpm for 2 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The dry lignin samples were dissolved in deuterated dimethyl sulfoxide (d6) and characterized using 13C–1H HSQC in a Bruker Avance III HD 500-MHz NMR spectrometer. A standard Bruker pulse sequence (hsqcetgpsisp.2) was used on a Prodigy platform cryoprobe. The spectra were acquired with the following acquisition conditions: 230 ppm spectral width in F1 (13C) dimension with 256 data points and 12 ppm spectral width in F2 (1H) dimension with 2048 data points, a 90° pulse, with a C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. Spectra were processed using the Bruker TopSpin 3.6 software.

Lignin, HSQC, Switchgrass, CBP , Ball mill, Disc m↗

DOE OSTI2024

Interactions Between Climate and Species Drive Future Forest Carbon and Water Balances

Global change is altering forest carbon and water balances; however, the extent to which tree species shape ecosystem‐scale responses to climate, particularly in biodiverse forests, remains unclear. To address this, we simulated the effects of an envelope of future climate conditions on watershed carbon and water balances and quantified the contributions of tree species based on their xylem anatomy. We accomplished this by incorporating species‐level transpiration calculations into a landscape‐scale ecosystem process model. Our revised model linked the effects of forest succession, species composition, and climate change on water and carbon. Calibration of forest water fluxes using sap flux measurements and catchment water balances captured variability in species transpiration and interannual ET in biodiverse, humid temperate forest catchments in the southern Blue Ridge Mountains, USA. Across wet and dry future climate projections, ET increased, and streamflow and net carbon uptake decreased, particularly under a scenario of increasing drought. Despite accounting for just 30% of current biomass, diffuse‐porous tree species were the main driver of carbon and water flux responses now and in the future, thus intensifying the increase in ET and decline in streamflow. As diffuse‐porous biomass continues to increase, these forests will be increasingly sensitive to drought, amplifying losses of carbon sequestration and freshwater delivery.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Synthesis of results for Brine Availability Test in Salt (BATS) DECOVALEX-2023 Task E

In the 2023 phase of the international collaborative DECOVALEX modeling project, Task E focused on understanding thermal, hydrological, and mechanical (THM) processes related to predicting brine migration in the excavation damaged zone around a heated excavation in salt. Salt is attractive as a disposal medium for radioactive waste because it is self-healing and is essentially impermeable and non-porous in the far field. Investigation of the short-term, near-field behavior is important for radioactive waste disposal because this early period strongly controls the amount of inflowing brine. Brine leads to corrosion of waste forms and waste packages, and possible dissolution of radionuclides with brine transport being a potential transport vector to the accessible environment.The Task was divided into steps. Step 0 included matching unheated brine inflow data from boreholes at the Waste Isolation Pilot Plant (WIPP) and matching temperature observations during a Brine Availability Test in Salt (BATS) heater test. Step 1 included validation of models against a thermo-poroelastic analytical solution, and two-phase flow around an excavation. Finally, Step 2 required all the individual components covered in steps 0 and 1 to come together to match observed brine inflow behavior during the same BATS heater test.There were a range of approaches from the teams, from mechanistic to prescriptive. Given the uncertainties in the problem, some teams used one- or two-dimensional models of the processes, while other teams included more geometrical complexity in three-dimensional models. Task E was a learning experience for the teams involved, and feedback from the modeling teams has led to changes in follow-on BATS experiments at WIPP. The primary Task E lessons learned were the impact of hydrologic initialization methods (wetting up vs. drying down), the difference between confined and unconfined thermal expansion, and the large changes in permeability associated with heating and cooling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗