Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A seven-degree-of-freedom, time-dependent quantum dynamics study on the energy efficiency in surmounting the central energy barrier of the OH + CH{sub 3} → O + CH{sub 4} reaction

A time-dependent, quantum reaction dynamics calculation with seven degrees of freedom was carried out to study the energy efficiency in surmounting the approximate center energy barrier of OH + CH{sub 3}. The calculation shows the OH vibration excitations greatly enhance the reactivity, whereas the vibrational excitations of CH{sub 3} and the rotational excitations hinder the reactivity. On the basis of equal amount of total energy, although this reaction has a slight early barrier, it is the OH vibrational energy that is the dominate force in promoting the reactivity, not the translational energy. The studies on both the forward O + CH{sub 4} and reverse OH + CH{sub 3} reactions demonstrate, for these central barrier reactions, a small change of the barrier location can significantly change the energy efficacy roles on the reactivity. The calculated rate constants agree with the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum molecular dynamics study of the mass distribution of products in 7.0A MeV {sup 238}U+{sup 238}U collisions

Within the improved quantum molecular dynamics (ImQMD) model incorporating the statistical decay model, the reactions of {sup 238}U+{sup 238}U at an energy of 7.0A MeV have been studied. The charge, mass, and excitation energy distributions of primary fragments are investigated within the ImQMD model, and de-excitation processes of these primary fragments are described by a statistical decay model. The mass distribution of the final products in {sup 238}U+{sup 238}U collisions is obtained and compared with the recently obtained experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A discrete dislocation dynamics study of precipitate bypass mechanisms in nickel-based superalloys

Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the $\gamma'$ precipitates distributed in the $\gamma$ matrix. Depending on the operating conditions and microstructure, a rich variety of bypass mechanism has been identified, with various shearing and Orowan looping processes gradually giving way to climb bypass as the operating conditions change from the low/intermediate temperatures and high stress regime, to the high temperature and low stress regime. When anti phase boundary (APB) shearing and Orowan looping mechanisms operate, the classical picture is that, at for a given volume fraction, the bypass mechanism changes from shearing to looping with increased particle size and within a broad coexistence size window. Another possibility, which is supported by indirect experimental evidence, is that a third “hybrid” transition mechanism may operate. Here, in this paper we use discrete dislocation dynamics (DDD) simulations to study dislocation bypass mechanisms in Ni-based superalloys. We develop a new method to compute generalized stacking fault forces in DDD simulations, based on a concept borrowed from complex analysis and known as the winding number of a closed curve about a point. We use this method to study the mechanisms of bypass of a square lattice of spherical $\gamma'$ precipitates by $a/2\langle110\rangle$ {111} edge dislocations, as a function of the precipitates volume fraction and size. We show that not only the hybrid mechanism is possible, but also that it operates as the transition mechanism between the shearing and looping regimes over a wide range of precipitates volume fraction and radii. Based on our simulation results, we propose a simple model for the strength of this mechanism. We also consider the effects of a $\gamma$/$\gamma'$ lattice misfit on the bypass mechanisms, which we approximate by an additional precipitate stress computed according to Eshelby’s inclusion theory. We show that in the shearing and hybrid looping-shearing regimes, a lattice misfit generally results in an increased bypass stress. For sufficiently high lattice misfit, the critical bypass configuration in attractive dislocation-precipitates interactions changes dramatically, and the bypass stress is controlled by the pinning of the trailing dislocation on the exit side of the precipitates, similar to what has been reported in the high-temperature creep literature.

36 MATERIALS SCIENCE↗

Molecular dynamics study of Si(100)-oxidation: SiO and Si emissions from Si/SiO{sub 2} interfaces and their incorporation into SiO{sub 2}

Dynamics of Si(100)-oxidation processes at the Si/SiO{sub 2} interface and in the SiO{sub 2} region are investigated focusing on SiO and Si emissions from the interface and the following incorporation into the SiO{sub 2} and/or substrate. Classical molecular dynamics (MD) simulations with variable charge interatomic potentials are performed to clarify these atomic processes. By incorporating oxygen atoms, two-folded Si atoms are formed after structural relaxation at the interface and are emitted as SiO molecules into SiO{sub 2}. The energy barrier of the SiO emission is estimated to be 1.20 eV on the basis of the enthalpy change in an MD simulation. The emitted SiO molecule is incorporated into the SiO{sub 2} network through a Si-O rebonding process with generating an oxygen vacancy. The energy barrier of the SiO incorporation is estimated to be 0.79–0.81 eV. The elementary process of oxygen vacancy diffusion leading to the complete SiO incorporation is also simulated, and the energy barriers are found to be relatively small, 0.71–0.79 eV. The energy changes of Si emissions into the substrate and SiO{sub 2} are estimated to be 2.97–7.81 eV, which are larger than the energy barrier of the SiO emission. This result suggests that, at the ideally flat Si/SiO{sub 2} interface, the SiO emission into the SiO{sub 2} region occurs prior to the Si emission, which is consistent with previous theoretical and experimental studies. The above mentioned typical atomic processes are successfully extracted from some (or one) of MD simulations among many trials in which a statistical procedure is partly employed. Our results give a unified understanding of Si oxidation processes from an atomistic point of view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unraveling Photodimerization of Cyclohexasilane from Molecular Dynamics Studies

Photoinduced reactions of a pair of cyclohexasilane (CHS) monomers are explored by time-dependent excited-state molecular dynamics (TDESMD) calculations. In TDESMD trajectories, one observes vivid reaction events including dimerization and fragmentation. A general reaction pathway is identified as (i) ring-opening formation of a dimer, (ii) rearrangement induced by bond breaking, and (iii) decomposition through the elimination of small fragments. The identified pathway supports the chemistry proposed for the fabrication of silicon-based materials using CHS as a precursor. Additionally, we find dimers have smaller HOMO–LUMO gaps and exhibit a red shift and line-width broadening in the computed photoluminescence spectra compared with a pair of CHS monomers.

36 MATERIALS SCIENCE↗

Probing the hydration structure of polarizable halides: a multi-edge XAFS and molecular dynamics study of the iodide anion.

A comprehensive analysis of the H2O structure about aqueous iodide (I-) is reported from molecular dynamics (MD) simulation and x-ray absorption fine structure (XAFS) measurements. XAFS spectra from the iodide K-, L1-, and L3- edges were co-refined to establish the complete structure of the first hydration shell about aqueous I-. The results show approximately 6.3 water molecules located at I-H and I-O distances of 2.65 Å and 3.50 Å, respectively. Whereas the I-O bond is moderately disordered (Debye Waller factor, σ2 = 0.017 Å2) due to the relatively low charge-to-ion radius ratio, the I-H interaction shows even higher disorder (σ2 = 0.036 Å2) due to the variable angular orientation of water at the ion surface. Molecular dynamics simulations employing both DFT (+dispersion) and classical potentials generate quite similar structures and they both agree to a large extent with the structure from the experimental XAFS. However the DFT-MD simulations provide a description of molecular structure that is more consistent with the XAFS experiment data. We employ a molecular anaylsis in which we incrementally evaluate the structural contributions from each of the nearest-neighbor water molecules about the iodide to provide a clear picture of the hydrated structure. For the DFT description of molecular interaction, a water molecule in the first shell has more freedom to rotate about the O atom when compared to motions resulting from a classical potential. Further, the hydrogen bonding of first-shell water with the second shell water establishes an strong ordering of the water about I- surface leading to characteristic O-I-O angles of 79 and 142°. This ordering, in addition to the higher coordination number leads to a more symmetric solvation from the DFT-MD configurations relative to the classical potential simulation.

08 HYDROGEN↗

Molecular dynamics studies of grain boundary mobility and anisotropy in BCC γ-uranium

Grain morphologies such as grain size and aspect ratio in uranium-based metallic fuels are important microstructural features that can impact various fuel performance properties such as fission-gas-induced swelling, thermal transport, high burnup structure formation, and radiation resistance. Accurate prediction of the fuel grain morphologies requires knowledge of critical grain growth parameters such as grain boundary (GB) mobility and anisotropy. In this work, molecular dynamics simulations were performed to study the GB mobility and its anisotropy in pure body-centered-cubic (BCC) γ uranium. Nine GBs with different combinations of misorientation angles (20°, 30°, 45°) and rotation axes (<100>, <110>, <111>), as well as an additional <111> 38.2° GB were studied using three interatomic potentials. Here, it is found that the GB mobility anisotropy has complex trends, depending on both rotation axis and misorientation. However, in general the <110> rotation axis has the fastest GB mobility at the same misorientation. The results of this work can be used as not only baselines for future studies of GB mobility in uranium-based alloys such as uranium-molybdenum (U-Mo) fuels, but also input for mesoscale modeling of grain growth in uranium-based alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A molecular dynamics study of domain switching in BiFeO 3 nanofilm under DC electric field

The performance of ferroelectric materials is deeply rooted in the domain switching process triggered by an applied electric field. To understand the effect of controlling factors on the domain switching characteristics, nanoscale studies are essential. In this work, an atomistic-scale computational framework is developed to study the domain switching process of bismuth ferrite (BiFeO 3 ) nanofilms. Through a series of molecular dynamics simulations, the effects of duration and magnitude of an electric field, domain size and nanofilm thickness on the domain switching behavior are investigated. The evolution of domains under different magnitudes and durations of the applied electric field is studied, and the results of unswitched and switched cases are summarized in a switching map. Analysis of various nanofilms reveals that by increasing the film thickness, the switching time is increased. Additionally, the nanofilms with different domain sizes and configurations are examined, and the minimum domain size for complete reversal switching is obtained. Our results are helpful to predict and tune the switching process in ferroelectric materials.

36 MATERIALS SCIENCE↗

Thermal transpiration: A molecular dynamics study

Thermal transpiration is a phenomenon where fluid molecules move from the cold end towards the hot end of a channel under the influence of longitudinal temperature gradient alone. Although the phenomenon of thermal transpiration is observed at rarefied gas conditions in macro systems, the phenomenon can occur at atmospheric pressure if the characteristic dimensions of the channel is less than 100 nm. The flow through these nanosized channels is characterized by the free molecular flow regimes and continuum theory is inadequate to describe the flow. Thus a non-continuum method like molecular dynamics (MD) is necessary to study such phenomenon. In the present work, MD simulations were carried out to investigate the occurance of thermal transpiration in copper and platinum nanochannels at atmospheric pressure conditions. The mean pressure of argon gas confined inside the nano channels was maintained around 1 bar. The channel height is maintained at 2nm. The argon atoms interact with each other and with the wall atoms through the Lennard-Jones potential. The wall atoms are modelled using an EAM potential. Further, separate simulations were carried out where a Harmonic potential is used for the atom-atom interaction in the platinum channel. A thermally insulating wall was introduced between the low and high temperature regions and those wall atoms interact with fluid atoms through a repulsive potential. A reduced cut off radius were used to achieve this. Thermal creep is induced by applying a temperature gradient along the channel wall. It was found that flow developed in the direction of the increasing temperature gradient of the wall. An increase in the volumetric flux was observed as the length of the cold and the hot regions of the wall were increased. The effect of temperature gradient and the wall-fluid interaction strength on the flow parameters have been studied to understand the phenomenon better.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of molecular shape on self-diffusion under severe confinement: A molecular dynamics study

In this study, we have investigated the effect of molecular shape and charge asymmetry on the translation dynamics of confined hydrocarbon molecules having different shapes but similar kinetic diameters, inside ZSM-5 pores using molecular dynamics simulations. The mean square displacement of propane, acetonitrile, acetaldehyde, and acetone in ZSM-5 exhibit two different regimes – ballistic and diffusive/sub-diffusive. All the molecules except propane exhibit sub-diffusive motion at time scales greater than 1 ps. The intermediate scattering functions reveal that there is a considerable rotational-translational coupling in the motion of all the molecules, due to the strong geometrical restriction imposed by ZSM-5. Overall the difference in shape and asymmetry in charge imposes severe restriction inside the ZSM-5 channels for all the molecules to different extents. Additionally, the behavior of molecules confined in ZSM-5 in the present study, quantified wherever possible, is compared to their behavior in bulk or in other porous media reported in literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electro-impulse deicing - Structural dynamic studies, icing tunnel tests and applications

This paper contains a discussion of the comparison of analytical and experimental results of the dynamic response of a flat rectangular plate subjected to electro-impulse type deicing forces. Early attempts in this correlation have been hampered by the complex leading edge geometries of the airfoils tested to date. The lack of a suitable analytical model for a typical leading edge structure has prompted these preliminary investigations of simple geometries, beginning with a flat plate and to be followed by a semi-cylindrical leading edge representation. The comparisons reported herein are thus limited to rectangular plate models. Project plans and icing tunnel results are given.

Bernhart, W. D.↗

A tight-binding molecular dynamics study of the noble metals Cu, Ag and Au

Here we have used the Naval Research Lab (NRL) tight-binding (TB) method to study the electronic and mechanical properties of the noble metals. In order to perform molecular dynamics simulations, we used new TB parameters that work well at smaller interatomic distances. The TB parameters were fitted to the fcc, bcc and sc periodic structures and were demonstrated to be transferable and robust for calculating additional dynamical properties which they had not been fitted to. We calculated the phonon frequencies and density of states at finite temperature and we also performed simulations to determine the temperature dependence of the coefficient of thermal expansion and the mean squared displacement. The energy for vacancy formation as well as energy for fcc-based, bcc-based clusters and icosahedral clusters of different sizes were also calculated. The results compared very well with experimental observations and independent (non-fitted) first-principles density functional calculations.

36 MATERIALS SCIENCE↗

Adsorption and solvation of ethanol at the water liquid-vapor interface: a molecular dynamics study

The free energy profiles of methanol and ethanol at the water liquid-vapor interface at 310K were calculated using molecular dynamics computer simulations. Both alcohols exhibit a pronounced free energy minimum at the interface and, therefore, have positive adsorption at this interface. The surface excess was computed from the Gibbs adsorption isotherm and was found to be in good agreement with experimental results. Neither compound exhibits a free energy barrier between the bulk and the surface adsorbed state. Scattering calculations of ethanol molecules from a gas phase thermal distribution indicate that the mass accommodation coefficient is 0.98, and the molecules become thermalized within 10 ps of striking the interface. It was determined that the formation of the solvation structure around the ethanol molecule at the interface is not the rate-determining step in its uptake into water droplets. The motion of an ethanol molecule in a water lamella was followed for 30 ns. The time evolution of the probability distribution of finding an ethanol molecule that was initially located at the interface is very well described by the diffusion equation on the free energy surface.

NASA Discipline Exobiology↗

A molecular dynamics study of thermal transport in nanoparticle doped Argon like solid

Interfacial phenomena such as mass and type of the interstitial atom, nano scale material defect influence heat transfer and the effect become very significant with the reduction of the material size. Non Equilibrium Molecular Dynamics (NEMD) simulation was carried out in this study to investigate the effect of the interfacial phenomena on solid. Argon like solid was considered in this study and LJ potential was used for atomic interaction. Nanoparticles of different masses and different molecular defects were inserted inside the solid. From the molecular simulation, it was observed that a large interfacial mismatch due to change in mass in the homogenous solid causes distortion of the phonon frequency causing increase in thermal resistance. Position of the doped nanoparticles have more profound effect on the thermal conductivity of the solid whereas influence of the mass ratio is not very significant. Interstitial atom positioned perpendicular to the heat flow causes sharp reduction in thermal conductivity. Structural defect caused by the molecular defect (void) also observed to significantly affect the thermal conductivity of the solid.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Understanding the Interaction of Pluronics L61 and L64 with a DOPC Lipid Bilayer: An Atomistic Molecular Dynamics Study

In this paper, we investigate the interactions of Pluronics L61 and L64 with a dioleylphosphatidylcholine (DOPC) lipid bilayer by atomistic molecular dynamics simulations using the all-atom OPLS force field. Our results show that the initial configuration of the polymer with respect to the bilayer determines its final conformation within the bilayer. When the polymer is initially placed at the lipid/water interface, we observe partial insertion of the polymer in a U-shaped conformation. On the other hand, when the polymer is centered at the bilayer, it stabilizes to a transmembrane state, which facilitates water transport across the bilayer. We show that membrane thickness decreases while its fluidity increases in the presence of Pluronics. When the polymer concentration inside the bilayer is high, pore formation is initiated with L64. Finally, our results show good agreement with existing experimental data and reveal that the hydrophilic/lipophilic balance of the polymer plays a critical role in the interaction mechanisms as well as in the dynamics of Pluronics with and within the bilayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quantum reaction dynamics study of the translational, vibrational, and rotational motion effects on the HD +H{sub 3}{sup +} reaction

Time-dependent, quantum reaction dynamics wavepacket approach is employed to investigate the impacts of the translational, vibrational, and rotational motion on the HD+H{sub 3}{sup +}{yields} H{sub 2}D{sup +}+ H{sub 2} reaction using the Xie-Braams-Bowman potential energy surface [Z. Xie, B. J. Braams, and J. M. Bowman, J. Chem. Phys. 122, 224307 (2005)]. We treat this five atom reaction with a seven-degree-of-freedom model by fixing one Jacobi and one torsion angle related to H{sub 3}{sup +} at the lowest saddle point geometry of the potential energy surface. The initial state selected reaction probabilities show that the rotational excitations of H{sup +}-H{sub 2} greatly enhance the reactivity with the reaction probabilities increased double at high rotational states compared to the ground state. However, the vibrational excitations of H{sub 3}{sup +} hinder the reactivity. The ground state reaction probability shows no reaction threshold for this exoergic reaction, and as the translational energy increases, the reaction probability decreases. Furthermore, reactive resonances and zero point energy play very important roles on the reaction dynamics. The obtained integral cross section has the character of an exoergic reaction without a threshold: it decreases with the translational energy increasing. The calculated thermal rate constants using this seven-degree-of-freedom model are in agreement with a later experiment measurement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic Properties and Lattice Dynamics Studies of the Nickel-Based Superconductor ThNiAsN

We perform theoretical studies of the newly discovered nickel-based pnictide ThNiAsN. The obtained large density of states may explain the normal-state Sommerfeld coefficient observed by former experiments. The obtained band structure and Fermi surfaces are rather two-dimensional with a small hole-like Fermi surface around X point and three electron-like ones around M point, which share great similarities with LaNiAsO. Meanwhile, the lattice dynamics of ThNiAsN are also studied within density functional perturbation theory (DFPT). The electron-phonon coupling constant is 0.67, suggesting that ThNiAsN is a phonon-mediated superconductor. In the end, as a prototype of nickel-based superconductor, we obtain an effective tight-binding model by means of the maximally localized Wannier function (MLWF). Based on this model, the nesting properties have been studied using Lindhard function for nominal doping and hole doping. We find the hole doping will introduce better nesting properties, making this system a potential candidate to develop magnetic and unconventional superconducting instabilities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Product gas evolution above planar microstructured model catalysts--A combined scanning mass spectrometry, Monte Carlo, and Computational Fluid Dynamics study

The transport and distribution of reaction products above catalytically active Pt microstructures was studied by spatially resolved scanning mass spectrometry (SMS) in combination with Monte Carlo simulation and fluid dynamics calculations, using the oxidation of CO as test reaction. The spatial gas distribution above the Pt fields was measured via a thin quartz capillary connected to a mass spectrometer. Measurements were performed in two different pressure regimes, being characteristic for ballistic mass transfer and diffusion involving multiple collisions for the motion of CO{sub 2} product molecules between the sample and the capillary tip, and using differently sized and shaped Pt microstructures. The tip height dependent lateral resolution of the SMS measurements as well as contributions from shadowing effects, due to the mass transport limitations between capillary tip and sample surface at close separations, were evaluated and analyzed. The data allow to define measurement and reaction conditions where effects induced by the capillary tip can be neglected (''minimal invasive measurements'') and provide a basis for the evaluation of catalyst activities on microstructured model systems, e.g., for catalyst screening or studies of transport effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗