Search NASA⌕ Search

SEARCH · Search NASA

Results for “effective turbulence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Thermal fluctuations in the dissipation range of homogeneous isotropic turbulence

In this work, using fluctuating hydrodynamics we investigate the effect of thermal fluctuations in the dissipation range of homogeneous isotropic turbulence. Simulations confirm theoretical predictions that the energy spectrum is dominated by these fluctuations at length scales comparable to the Kolmogorov length. We also find that the extreme intermittency in the far-dissipation range predicted by Kraichnan is replaced by Gaussian thermal equipartition.

42 ENGINEERING↗

Adaptive Mesh Refinement for Parallel in Time Methods

The project applied the multigrid-reduction-in-time (MGRIT) algorithm to an existing sub-cycled adaptive mesh refinement (AMR) code to investigate the performance of flows dominated by inertial physics. Previous work demonstrated good performance from MGRIT+AMR applied to flows dominated by diffusive physics. Consistent with previous experience, inertial physics negatively affected convergence rates and performance. Efforts to circumvent this issue by appealing to the physics of turbulence were investigated. It has been demonstrated that scales can be effectively transferred between multigrid levels for a turbulent flow resulting in a) partial convergence observed and b) nearly identical results to sequential time-stepping. Performance improvements have not yet been demonstrated - attempts at coarsening the grid on coarser MG levels compromises the solution quality and leads to divergence. This report summarize the accomplishments for the time-frame from 10/5/2020 to 12/31/2020 with an informal no-cost-extension to 05/20/2021

97 MATHEMATICS AND COMPUTING↗

INVESTIGATION OF TURBULENT JETS, SPRAYS, AND SUPERCRITICAL MIXING BY TIME RESOLVED RAINBOW SCHLIEREN DEFLECTOMETRY

As technological advancements have enabled higher efficiency compression ignition (CI) engines (diesel engines) by operating at higher pressures and temperatures, the mechanisms of fuel-air mixing are postulated to change. Thus, there is a greater need for experimental data to develop and verify new phenomena. However, the fast time scales and harsh environments associated with CI engines present many experimental difficulties and requires high quality non-intrusive diagnostics to obtain useful data. The diagnostics itself must be validated prior to its implementation in an engine environment. The purpose of this research is to advance rainbow schlieren deflectometry (RSD) to study turbulent fuel sprays including the effects of supercritical mixing in CI engine environments. This objective is met by developing and applying quantitative RSD, for the first time, to three separate aspects of fuel sprays: 1) turbulent mixing, 2) phase boundaries, and 3) non-ideal gas mixing. First, quantitative RSD is demonstrated for turbulent mixing in a canonical helium jet. Rayleigh scattering data in the literature is used to validate the concentration measurements obtained by RSD. The results also provide explanations for phenomena occurring in the helium jet and provide data not yet present in the literature. Second, RSD is applied to high pressure multi-phase fuel sprays and new methodologies are developed to distinguish the liquid region from the vapor region and to quantify the in-between region on a probabilistic basis. Isolating liquid and vapor regions generally requires two separate diagnostics, e.g., Mie scattering (liquid region) and Rayleigh scattering (vapor region). However, the results of this study demonstrate that RSD can be used as a single diagnostic to measure both liquid and vapor boundaries. Third, the optical-to-thermodynamic relations associated with refrac-tometry are investigated under non-ideal gas mixing conditions to develop a generalized relationship valid for both ideal or non-ideal gas mixing. The last part of this research develops the theoretical tools to understand and experimentally realize supercritical mixing at diesel conditions. Guided by the theoretical analysis, RSD is applied to compare supercritical versus transcritical mixing at CI conditions using a constant pressure test rig. It is found that while fully supercritical mixing ers benefits in diesel engines, i.e, faster mixing times (50% higher velocities), the absence of droplets which cause high levels of particulate emissions, etc., it would be difficult to achieve in practice because of the requirements of fuels with low critical temperature and/or substantial fuel preheating.

02 PETROLEUM↗

A Parameterization of Turbulent Dissipation and Pressure Damping Time Scales in Stably Stratified Inversions, and its Effects on Low Clouds in Global Simulations

Abstract It is difficult for coarse‐resolution global models of the atmosphere to accurately simulate the observed distribution of low clouds. In particular, it is difficult for moist turbulence closure models to simulate sufficiently bright near‐coastal stratocumulus (Sc) without simulating overly bright marine shallow cumuli (Cu). To parameterize bright Sc, a turbulence parameterization must damp the turbulent fluxes of heat and moisture above cloud top in order to prevent excessive entrainment of dry air into cloud top. To parameterize dim shallow Cu, the subgrid variances of temperature and moisture must remain large, in order to permit partial cloudiness. However, damping the fluxes but not the variances just above cloud top is difficult if a parameterization uses a single “master” time scale to damp both. In nature, the above‐cloud fluxes are damped by pressure fluctuations, whereas scalar variances are damped by a different process, namely, turbulent dissipation. In a stably stratified inversion above cloud, pressure damping is large but turbulent dissipation is small. To avoid this problem, a multitime scale parameterization for damping has been developed. The damping parameterization has been implemented in a global model and evaluated. The parameterization is capable of dimming shallow Cu while producing adequately bright Sc.

54 ENVIRONMENTAL SCIENCES↗

A hybrid full-wave Markov chain approach to calculating radio-frequency wave scattering from scrape-off layer filaments

The interaction of radio-frequency (RF) waves with edge turbulence modifies the incident wave spectrum, and can significantly affect RF heating and current drive in tokamaks. Previous lower hybrid (LH) scattering models have either used the weak-turbulence approximation, or treated more realistic, filamentary turbulence in the ray tracing limit. In this study, a new model is introduced which retains full-wave effects of RF scattering in filamentary turbulence. First, a Mie-scattering technique models the interaction of an incident wave with a single Gaussian filament. Next, an effective differential scattering width is derived for a statistical ensemble of filaments. Lastly, a Markov chain solves for the transmitted wave spectrum in slab geometry. This model is applied to LH launching for current drive. The resulting wave spectrum is asymmetrically broadened in angular wavenumber space. This asymmetry is not accounted for in previous LH scattering models. The modified wave spectrum is coupled to a ray tracing/Fokker–Planck solver (GENRAY/CQL3D) to study its impact on current drive. The resulting current profile is greatly altered, and there is significant increase in the on-axis current and decrease in the off-axis peaks. This is attributed to a portion of the modified wave spectrum that is strongly dampened on-axis during the first pass.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigating shear flow through continuum gyrokinetic simulations of limiter biasing in the Texas Helimak

Previous limiter-biasing experiments on the Texas Helimak, a simple magnetized torus, have been inconclusive on the effect of flow shear on turbulence levels. To explore this, the first gyrokinetic simulations of limiter biasing in the Helimak using the plasma physics code Gkeyll have been carried out, and results are presented here. For the scenarios considered, turbulence is mostly driven by the interchange instability, which depends on gradients of steady state density profiles. An analysis of both experimental and simulation data demonstrates that shear rates are mostly less than than local linear growth rates, and not all requirements for shear stabilization are met. Yet, the mostly vertical shear flow has an important effect on bulk transport and experimental steady-state density profiles, and changes to the gradients correspond to changes in turbulence levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Type Ia supernovae deflagration-to-detonation transition explosions powered by the Zel’dovich reactivity gradient mechanism

ABSTRACT Our aim in this work is to identify and explain the necessary conditions required for an energetic explosion of a Chandrasekhar-mass white dwarf. We construct and analyse weakly compressible turbulence models with nuclear burning effects for carbon/oxygen plasma at a density expected for the deflagration-to-detonation transition (DDT) to occur. We observe the formation of carbon deflagrations and transient carbon detonations at early times. As turbulence becomes increasingly inhomogeneous, sustained carbon detonations are initiated by the Zel’dovich reactivity gradient mechanism. The fuel is suitably preconditioned by the action of compressive turbulent modes with wavelength comparable to the size of resolved turbulent eddies; no acoustic wave is involved in this process. Oxygen detonations are initiated, aided either by reactivity gradients or by collisions of carbon detonations. The observed evolutionary time-scales are found to be sufficiently short for the above process to occur in the expanding, centrally ignited massive white dwarf. The inhomogeneous conditions produced prior to the DDT might be of consequence for the chemical composition of the outer ejecta regions of Type Ia supernovae from the single degenerate channel, and offer the potential for validation of the proposed model.

Brooker, E.↗

Comparative studies of cross-phase dynamics in turbulent momentum flux and particle flux at the tokamak edge

Turbulent transport events, including turbulent transport flux of momentum (i.e., turbulent momentum flux or Reynolds stress) and turbulent transport flux of particle (i.e., turbulent particle flux), have important effects on the confinement performance of magnetic confinement fusion devices. Poloidal Reynolds stress is the ensemble average of the product of radial velocity fluctuations and poloidal velocity fluctuations, i.e., $\langle {\widetilde{v}}_{r}{\widetilde{v}}_{\theta }\rangle$. Turbulent particle flux is the ensemble average of the product of radial velocity fluctuations and density fluctuations, i.e., $\langle \widetilde{n}{\widetilde{v}}_{r}\rangle$. Changes in either amplitude of fluctuations or cross phase between fluctuations can cause changes in turbulent transport. In this paper, cross-phase dynamics in the Reynolds stress and turbulent particle flux at the tokamak edge are studied in detail. Reynolds stress and turbulent particle flux are, respectively, written as the product of fluctuation amplitudes and an average cross-phase factor. The mathematical expressions of the average cross-phase factors are derived. The average cross-phase factors and the power spectra of cross phase are obtained using experimental measurement data. It is found that the cross-phase dynamics in Reynolds stress and particle flux are very different. Reynolds stress is found to be more sensitive to cross phase than particle flux is. In the strong $E\times B$ shear layer, spatial slips of cross phase lead to the obvious radial gradient of Reynolds stress. In the no/weak $E\times B$ shear region, the cross phase in Reynolds stress tends to lock. Here, phase locking refers to that the power spectra of phase tend to distribute around a fixed phase which does not change with radial position, while phase slip means that the power spectra of cross phase tend to distribute around a phase that varies with radial position. Phase slip or locking mainly describes the central phase weighted by the power spectra, while the phase scattering mainly describes the dispersion of the power spectrum distribution of the phase. The increased scattering of cross phase, which indicates the power spectra distribution of the phase is more dispersed, contributes to the decreased Reynolds stress for higher collisionality. The cross phase in particle flux tends to lock in both strong and no/weak shear regions. The degree of scattering of cross phase in the particle flux does not change obviously as collisionality increases. For higher collisionality, it is the increased density fluctuation amplitude rather than cross-phase dynamics that leads to the increased particle flux. The underlying physical mechanism that causes Reynolds stress and particle flux to exhibit different phase dynamics is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predictive Large-Eddy Simulation of Supercritical-Pressure Reactive Flows in the Cold Ignition Regime

This report describes a one-year study performed under DOE sponsorship, continuing the investigation of high-pressure turbulent reactive flows. The interest is in the effect of the chemical species distribution in high-pressure turbulent flows in the presence of strong temperature gradients as would occur during reactions in realistic flows. The prime example of such flows are boundary layers in which the wall is at a lower temperature than that of the fluid, as would be the case in Diesel engines. Previous DOE BES work in the program further highlighted the importance of the boundary layer as a configuration for fundamental studies: soot formation in boundary layers is still a problem poorly understood and depends on the availability of particular chemical species at that location, and when boundary layer Large Eddy Simulations results were compared with measurements, the agreement was unfavorable, showing that this important ‘unit’ problem is not well understood. To understand this unit problem, modeling and Direct Numerical Simulations of this unit problem were conducted for the simplest possible multispecies system, that is a binary-species system. The results discovered a new phenomenon, that is, Soret effect induced uphill diffusion. The far-reaching implication is that through an imposed wall/fluid temperature difference it is possible to control the distribution of the species in the boundary layer. Because the results have been documented in one paper published in the refereed literature, and also in conference papers, this final report is in the form of an Executive Summary succinctly describing the results and putting them in perspective with respect to existing information. The refereed and conference papers published are individually listed as Appendices and attached to this report. One manuscript is still in progress and is thus not listed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magnetic reconnection and dynamos in the presence of plasma turbulence

Evolving magnetic fields are frequently embedded in plasmas that are turbulent. When the primary interest is in effects that are on a large scale compared to that of the turbulence, it is desirable to average over the turbulence to obtain equations for mean-field magnetohydrodynamics. An obvious constraint on the validity of the averaging is that large-scale quantities that evolve slowly using the exact evolution equations must remain slowly evolving in the mean-field theory. Magnetic helicity is the primary example of such a quantity, and maintaining its slow evolution has been controversial in mean-field magnetohydrodynamics. A full theory of magnetic reconnection in turbulent plasmas is not the intent of this paper. The intent is to show how exact results from Maxwell's equations explain why fast reconnection is so ubiquitous and what constraints these results place on the theory of magnetic field evolution, including dynamos, whether the plasma is turbulent or not. These constraints are commonly broken in the reconnection literature, which has been heavily influenced by two-dimensional theory that is not applicable to three-dimensional problems.

Boozer, Allen H. [Columbia Univ., New York, NY (Un↗

Turbulence link to L-mode, I-mode, and H-mode confinement in the DIII-D tokamak

Understanding the physics of low-confinement (L-), improved-confinement (I-), and high-confinement (H-) modes is critical for fusion reactors. The finding herein reports observations of two types of turbulence coexisting near the L-mode edge, one magnetohydrodynamic (MHD)-like and another micro-tearing mode (MTM)-like, linked to the H-mode and I-mode confinement in the DIII-D tokamak. Ion-scale magnetic and density turbulence is measured using a Faraday-effect radial-interferometer-polarimeter and beam-emission-spectroscopy (BES). Broadband turbulence spectra of up to ~600 kHz are observed in two discharges where transitions between L-mode, I-mode, and H-mode occurs. Turbulence is found to be inversely correlated with confinement, meaning lower turbulence power at higher confinement. Distinctively, the high-frequency (HF, >~100 kHz) magnetic turbulence power changes by the most (55%) during transitions primarily involving energy confinement change, whereas the low-frequency (LF, <~100 kHz) magnetic and density turbulence power changes by the most (80%) during transitions primarily involving particle confinement change. The LF turbulence amplitude oscillates with and leads to deuterium-alpha emission oscillations before an H-mode. These results imply that HF turbulence mainly affects energy confinement whereas LF turbulence can affect particle confinement. The magnetic and density turbulence exhibits coherence up to 0.6 and cross-phase magnitude close to π/2 in most cases, suggesting they have a common origin in both the LF and HF ranges. BES suggests that LF turbulence resides at the edge (ρ = 0.95) and HF turbulence can be at the outer core (ρ = 0.8) or edge (ρ = 0.95). Comparisons of measurements, theory, and gyrokinetic simulations suggest that HF turbulence is MTM-like in all cases, whereas LF turbulence is more consistent with MHD-like modes and the exact instability might change during transitions—except that a drift-wave origin is possible in a low collisionality H-mode. These results suggest that the H-mode involves suppressed MHD-like turbulence, whereas the I-mode mitigates MTM-like turbulence along with largely unchanged MHD-like turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of breakup and coalescence in fine-scale bubble-induced turbulence. II. Kinematics

This second part of our research explores the kinematic aspect of fine-scale bubble-induced turbulence (BIT) to (i) present the effect of bubble breakup and coalescence and (ii) compare it against the universal kinematic fine-scale turbulence characteristics reported in the literature. To this end, we simulate a dilute bubbly system of 0.5% void fraction using two distinct numerical simulations. In the volume-of-fluid (VoF) simulation, bubbles undergo breakup and coalescence. In the immersed boundary method (IBM) simulation, however, they act as rigid spheres. We also perform a simulation of classical homogeneous isotropic turbulence (HIT). The first important outcome of this study is that BIT is radically different from HIT in terms of its kinematic fine-scale characteristics. In the vorticity-dominating regions, BIT exhibits a weak vortex stretching. This weak vortex stretching is due to (a) the intermediate strain-rate eigenvalues skewed weakly to positive and (b) the extensive strain-rate eigenvector aligning perpendicular to the vorticity vector. The BIT has, on average, not only a weak enstrophy production but also a weak strain production in strain-dominating regions. The weak strain production is due to (a) the presence of vortex stretching in highly strained fluid elements and (b) the absolute magnitude of compressive strain-rate eigenvalue being as close to the extensive strain-rate eigenvalue. Thus, none of the kinematic fine-scale HIT characteristics is noted for BIT. The second important conclusion is that bubble breakup and coalescence play little to no influence on the kinematics of fine-scale BIT as VoF and IBM simulations produce similar results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of momentum transport models for numerical relativity

The main problems of nonvacuum numerical relativity, compact binary mergers and stellar collapse, involve hydromagnetic instabilities and turbulent flows, so that kinetic energy at small scales leads to mean effects at large scale that drive the secular evolution. Notable among these effects is momentum transport. We investigate two models of this transport effect, a relativistic Navier-Stokes system and a turbulent mean stress model, that are similar to all of the prescriptions that have been attempted to date for treating subgrid effects on binary neutron star mergers and their aftermath. Our investigation involves both stability analysis and numerical experimentation on star and disk systems. We also begin the investigation of the effects of particle and heat transport on postmerger simulations. Here, we find that correct handling of turbulent heating is crucial for avoiding unphysical instabilities. Given such appropriate handling, the evolution of a differentially rotating star and the accretion rate of a disk are reassuringly insensitive to the choice of prescription. However, disk outflows can be sensitive to the choice of method, even for the same effective viscous strength. We also consider the effects of eddy diffusion in the evolution of an accretion disk and show that it can interestingly affect the composition of outflows.

79 ASTRONOMY AND ASTROPHYSICS↗

Development and Verification of an Improved Wake-Added Turbulence Model in FAST.Farm

We introduce a generalized wake-added turbulence (WAT) model in the multiphysics, multiturbine simulation tool FAST.Farm. The WAT model introduces additional small-scale turbulence that represents the breakdown of vortical structures and shear layers in the wake. The article describes the development, implementation, calibration, and verification of the model. The novelties of the model include support for wake asymmetry, buildup of WAT across the wind farm, and secondary effects of wake-induced turbulence (e.g., wake meandering) driven by smaller-scale turbulence structures that arise from wake breakdown. Large-eddy simulations were run to support the calibration of the WAT parameters and verification of the model. Previous studies hypothesized that the lack of WAT modeling was the source of underprediction of fatigue loads, in particular for cases at low turbulence intensities and/or stable atmospheric boundary layers. This study confirms that the newly implemented WAT model enhances the loads predictions in these cases.

17 WIND ENERGY↗

Origin of multifractality in solar wind turbulence: the role of current sheets

ABSTRACT In this work, a multifractal framework is proposed to investigate the effects of current sheets in solar wind turbulence. By using multifractal detrended fluctuation analysis coupled with surrogate methods and volatility, two solar wind magnetic field time series are investigated, one with current sheets and one without current sheets. Despite the lack of extreme-events intermittent bursts in the current sheet-free series, both series are shown to be strongly multifractal, although the current sheet-free series displays an almost linear behaviour for the scaling exponent of structure functions. Long-range correlations are shown to be the main source of multifractality for the series without current sheets, while a combination of heavy-tail distribution and non-linear correlations is responsible for multifractality in the series with current sheets. The multifractality in both time series is formally shown to be associated with an energy-cascade process using the p-model.

Gomes, Leonardo F.↗

The role of shear flow collapse and enhanced turbulence spreading in edge cooling approaching the density limit

Abstract Experimental studies of the dynamics of shear flow and turbulence spreading at the edge of tokamak plasmas are reported. Scans of line-averaged density and plasma current are carried out while approaching the Greenwald density limit on the J-TEXT tokamak. In all scans, when the Greenwald fraction f G = n ¯ / n G = n ¯ / ( I p / π a 2 ) increases, a common feature of enhanced turbulence spreading and edge cooling is found. The result suggests that turbulence spreading is a good indicator of edge cooling, indeed better than turbulent particle transport is. The normalized turbulence spreading power increases significantly when the normalized E × B shearing rate decreases. This indicates that turbulence spreading becomes prominent when the shearing rate is weaker than the turbulence scattering rate. The asymmetry between positive/negative (blobs/holes) spreading events, turbulence spreading power and shear flow are discussed. These results elucidate the important effects of interaction between shear flow and turbulence spreading on plasma edge cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of sheared E × B flow in self-organized, improved confinement states in magnetized plasmas

A great scientific success story of magnetic fusion research in the past several decades is the theoretical development and experimental testing of the process of turbulence decorrelation and stabilization by sheared E×B flow which shows that E×B shear effects are ubiquitous in magnetized plasmas. This concept of turbulence decorrelation and stabilization has the universality needed to explain the H-mode edge transport barriers seen in limiter and divertor tokamaks, stellarators, and mirror machines; the broader edge transport barrier seen in VHmode plasmas; and the core transport barriers formed in tokamaks. Similar effects are seen in linear devices. These examples of confinement improvement are of considerable physical interest; it is not often that a system self-organizes to reduce transport when an additional source of free energy is applied to it. The transport decrease associated with E×B velocity shear is also of great practical benefit to fusion research, since it contributed to substantially increased fusion yield in all DT magnetic fusion experiments conducted to date. The fundamental physics involved in transport reduction is the effect of E×B shear on the growth, radial extent, and phase correlation of turbulent eddies in the plasma. The same basic transport reduction process can be operational in various portions of the plasma because there are a number of ways to change the radial electric field Er. An important secondary theme in this area is the synergistic effect of E×B velocity shear and magnetic shear. Although the E×B velocity shear appears to have an effect on broader classes of microturbulence, magnetic shear can mitigate some potentially harmful effects of E×B velocity shear and facilitate turbulence stabilization. Our present understanding in this area is the result of a multi-decade, intertwined effort in theory, modeling and diagnostic development combined with continuing experimental investigations. These experiments have clearly demonstrated that increased E×B shear causes reductions in turbulence and transport. Finally, the experimental findings are generally consistent with the basic theoretical models although considerable work remains to be done before we have a fully predictive theory of transport in magnetized plasmas including E×B shear effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Numerical Simulations of Turbulent Flow over Misaligned Traveling Waves

Direct numerical simulations of turbulent flow over prescribed traveling waves in a half-channel flow setup subject to a combined streamwise and spanwise pressure gradient are performed at a friction Reynolds number of 180. The simulations undertaken in this study consider both flow-aligned (including opposing and following) and misaligned waves as we attempt to quantify the effect of wave misalignment on turbulence statistics, the pressure drag force, and the wave attenuation rate. For the simulations, we consider three characteristic wave age values corresponding to slow-, intermediate-, and fast-moving waves. Wave misalignment is taken into account by applying a spanwise pressure gradient vertical to the traveling waves, which results in a three-dimensional turbulent flow field above the moving waves. Key flow quantities such as the mean velocity, velocity variances, and momentum fluxes are found to vary with the wave parameters, confirming the findings of previous studies.

direct numerical simulation↗