Search NASA⌕ Search

SEARCH · Search NASA

Results for “epitaxy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A Novel $\sqrt {19} $ × $\sqrt {19} $ Superstructure in Epitaxially Grown 1T–TaTe 2

The spontaneous formation of electronic orders is a crucial element for understanding complex quantum states and engineering heterostructures in 2D materials. A novel $\sqrt {19} $ × $\sqrt {19} $ charge order in few-layer-thick 1T-TaTe 2 transition metal dichalcogenide films grown by molecular beam epitaxy, which has not been realized, is report. The photoemission and scanning probe measurements demonstrate that monolayer 1T-TaTe 2 exhibits a variety of metastable charge density wave orders, including the $\sqrt {19} $ × $\sqrt {19} $ superstructure, which can be selectively stabilized by controlling the post-growth annealing temperature. Moreover, it is found that only the $\sqrt {19} $ × $\sqrt {19} $ order persists in 1T-TaTe 2 films thicker than a monolayer, up to 8 layers. Furthermore, the findings identify the previously unrealized novel electronic order in a much-studied transition metal dichalcogenide and provide a viable route to control it within the epitaxial growth process.

36 MATERIALS SCIENCE↗

Defect Generation and Evolution in Irradiated Epitaxial Films and Heterostructures of Fe 3 O 4 and Cr 2 O 3

Abstract The functionality of nuclear structural materials, sensors, and microelectronics in harsh environments such as radiation relies on understanding defect generation and evolution processes in oxide layers. The initial radiation response of epitaxial thin films of Fe 3 O 4 (111), Cr 2 O 3 (0001), and Fe 3 O 4 (111)/Cr 2 O 3 (0001) heterostructures deposited on Al 2 O 3 (0001) by oxygen‐assisted molecular beam epitaxy and irradiated with 200 keV He + is characterized. X‐ray diffraction and X‐ray absorption near edge spectroscopy showed that the Cr 2 O 3 layers underwent significant lattice expansion and disordering under irradiation, whereas the Fe 3 O 4 layers do not exhibit noticeable changes. In contrast, positron annihilation spectroscopy revealed an evolution of cation vacancy point defects in the Fe 3 O 4 layers into larger vacancy clusters with increasing irradiation, while the cation vacancies in Cr 2 O 3 remained primarily as single vacancies and small clusters. The results suggest that the Fe 3 O 4 lattice can utilize the free volume of the larger vacancy clusters to relax but the small vacancies in the Cr 2 O 3 lattice do not facilitate relaxation. Comparing defect concentrations in the single layer films versus the heterostructure suggests that point defects may cross the interface from Fe 3 O 4 into Cr 2 O 3 . Together, these results enhance the understanding of the initial defect evolution mechanisms in oxide layers in harsh irradiation environments.

36 MATERIALS SCIENCE↗

Orientation Control in Epitaxial PdO Thin Films Grown on MgO (001) – Role of Oxygen Chemical Potential

Control of crystal orientations in thin films of functional materials allowsedictive tuning of their strain states, electronic properties, and surface chemical reactivity. Here, conditions for orientation control in epitaxial PdO films are investigated. Due to its tetragonal structure, PdO can form two orientational relationships with the MgO (001). It is shown that, under an oxygen-rich environment provided by oxygen-plasma-assisted molecular beam epitaxy, both (00l)- and (100)-oriented PdO domains form on MgO (001). Subsequent thermal annealing in a vacuum promotes film restructuring to a predominantly (100)-oriented PdO with improved crystallinity. Ab initio calculations reveal that the (001) orientation has lower strain energy but weaker interfacial interactions and serves as an oxygen vacancy sink, whereas the (100) orientation benefits from significantly stronger MgO─PdO bonding. Consequently (100)-oriented domains become favored under oxygen-poor conditions. A mechanism is proposed whereby vacuum annealing drives orientation transformation by generating oxygen vacancies that destabilize the (001) domains and promote (100) ordering. These findings deepen the understanding of how oxygen content impacts interfacial stability and reorganization, thereby offering a route to tune domain orientations in oxide thin films.

36 MATERIALS SCIENCE↗

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Abstract Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin‐orbit interaction and large Landé g‐factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II–VI cadmium telluride (CdTe) with the III–V InSb in the form of core–shell (InSb–CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb–CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb–CdTe interface using density functional theory is determined and a type‐I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice‐matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field‐effect mobility measured for both uncapped and CdTe‐capped nanowires.

36 MATERIALS SCIENCE↗

Epitaxial Stabilization of Metastable 3C BaRuO 3 Thin Film with Ferromagnetic Non-Fermi Liquid Phase

Thin films of perovskite ruthenates of the general formula ARuO 3 (A = Ca and Sr) are versatile electrical conductors for viable oxide electronics. They are also scientifically intriguing, as they exhibit nontrivial electromagnetic ground states depending on the A-site element. Among them, realization of the cubic perovskite (3C) BaRuO 3 in thin film form has been a challenge so far, because the 3C phase is metastable with the largest formation energy among the various polymorph phases of BaRuO 3 . In this study, 3C BaRuO 3 thin films are successfully prepared employing epitaxial stabilization. Here the 3C BaRuO 3 thin films show itinerant ferromagnetism with a transition temperature of ≈48 K and a non-Fermi liquid phase. The epitaxial stabilization of the 3C BaRuO 3 further enables to make a standard comparison of perovskite ruthenates, thereby establishing the importance of the Ru-O orbital hybridization in understanding the itinerant magnetic system.

36 MATERIALS SCIENCE↗

24% Single-Junction GaAs Solar Cell Grown Directly on Growth-Planarized Facets Using Hydride Vapor Phase Epitaxy

A 24%-efficient single-junction GaAs solar cell grown directly on a faceted, spalled (100) GaAs substrate after in situ planarization growth by hydride vapor phase epitaxy (HVPE) is achieved. Controlled spalling, a promising low-cost substrate reuse technique, produces large facets in (100)-oriented GaAs substrates due to the orientation of the fracture planes used for lift-off. Planarization by HVPE offers a path toward direct use of these spalled substrates without costly polishing steps. In this report the growth rate anisotropy enabling planarization arising from diffusion and differences in the adsorption of growth species on {n11}B-type facets relative to (100) is determined. Consecutive planarization and device growth that results in a solar cell with a minimal performance difference relative to a control cell grown on an epitaxy-ready substrate are demonstrated. These results show that controlled spalling coupled with HVPE planarization is a viable pathway for lowering the cost of III-V photovoltaics.

14 SOLAR ENERGY↗

Which way does the dendrite grow? Competition among epitaxy, preferred growth direction, and thermal gradients in powder bed fusion additive manufacturing

The as-processed microstructure of metal alloy parts manufactured through laser powder bed fusion (LPBF) is heavily derived from the cellular dendritic solidification. The growth direction of dendrites within the melt pool is determined through competition among epitaxial growth, preferred growth directions, and maximum thermal gradients. However, the dominant factor and the specific role of each in developing melt pool microstructures remain unknown. Here, in this study, we performed single laser track scans on an SS316L single crystal substrate and combined experimental characterization of microstructure and crystal orientations with Computational Fluid Dynamics simulations of thermal gradients to evaluate the role of each factor in determining dendritic growth direction and evolution. Our results reveal that epitaxial growth dominates microstructure development by preferentially growing along a single 〈100〉 variant of the single crystal substrate adjacent to the melt pool boundary. Under LPBF’s highly curved and rapidly evolving thermal field, this preferential dendrite variant selection and its continued growth from the melt pool boundary to the centerline are governed by the local temperature gradient magnitude at the solid-liquid interface, rather than by the instantaneous maximum temperature gradient direction alone. Using these findings, we successfully predict changes in the dendrite growth direction with changing laser scan direction on a single crystal substrate, and show that the geometric melt pool centerline can deviate from the microstructural centerline because asymmetric local temperature gradient magnitudes transiently limit growth, resulting in different dendrite travel distances on each side of the melt pool.

36 MATERIALS SCIENCE↗

Surface and interface structures of epitaxial Sb 2 Se 3 on mica

Sb 2 Se 3 thin film is an emerging photon absorber used in solar cells. We report the study of surface and interface structures of Sb2Se3(1 2 0) film grown on mica substrate by a high-rate vapor transport method. The interface epitaxial relationship between Sb 2 Se 3 and mica examined by the cross- sectional TEM images and diffraction patterns along the [0 0 1] and [10] directions of Sb 2 Se 3 reveal a rectangular structure with lengths of 4.03 ± 0.1 Å and 5.29 ± 0.1 Å, consistent with the [1 2 0] out-of-plane direction of Sb 2 Se 3 bulk lattice parameters. In contrast, the two-dimensional reciprocal space map (2D map) constructed from azimuthal reflection high-energy electron diffraction (ARHEED) patterns from the surface exhibits a decorated hexagonal structure. This surface structure emerges from six epitaxial orientation domains/rods and each domain has a rectangular unit mesh of 3.94 ± 0.09 Å and 26.95 ± 1.16 Å along the [0 0 1] and [10] directions. The 26.95 Å is consistent with the unit mesh of the outermost layer of the Sb 2 Se 3 (1 2 0) domains/rods. Overall, our 2D map reveals surface information that are not easily observed by other diffraction techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Au assisted smooth ultrathin epitaxial ZnO film grown by pulsed laser deposition on sapphire(0001)

High quality ZnO has applications in photonics and electronics. Literature has shown that continuous, but rough ZnO film can be grown on sapphire substrate by pulsed laser deposition (PLD). In this work, ZnO and Au were co-deposited by PLD on sapphire(0001) substrates from a single ZnO target overlaid with an Au strip that serves as a catalyst. The reflection high-energy electron diffraction (RHEED) patterns show paired double stripes from sample of ZnO-Au where the difference of in-plane lattice parameters between ZnO and Au is 11.4 %. The two-dimensional (2D) reciprocal space maps constructed from azimuthal RHEED (ARHEED) patterns reveal parallel epitaxial relationship between ZnO and Au in the continuous ZnO-Au film on sapphire substrate. Transmission electron microscopy (TEM) cross section images and energy dispersive spectroscopy maps show a minute amount of Au nanocrystals distributed in the entire ultrathin ZnO film. Atomic force microscopy shows the root-mean-square roughness of the surface of ultrathin ZnO film with Au is in the sub-nm range. The ARHEED and TEM results show that a couple of atomic percentages of Au co-deposited with ZnO catalyzes the growth of smooth ultrathin epitaxial ZnO film.

36 MATERIALS SCIENCE↗

Epitaxial growth and characterization of magnesium gallate (MgGa 2 O 4 ) thin films by pulsed laser deposition

To advance high power device application of MgGa 2 O 4 , it is imperative to achieve crystalline epitaxial thin films and to observe its materials’ characteristics within a wide range of growth conditions. However, there is no published work on the growth of this promising ultrawide bandgap material till this day. In this study, we report the crystalline growth of MgGa 2 O 4 thin films on c-plane (006) sapphire substrates using the pulsed laser deposition (PLD) technique in a broad range of temperature and oxygen pressure. The temperature range for this crystalline growth was within the temperature range of 300°C to 700°C and a pressure range of 1x10 -1 to 1x10 -3 Torr. Within this parameter range, the structural, chemical, optical, and surface property of MgGa 2 O 4 thin films have been investigated. Specifically, the acquired XRD patterns confirmed the film growth along the [111] preferential crystal orientation in the lattice. Here, the rocking curve measurement of the prominent (222) plane showed an increasing trend of the crystallinity with growth temperature and pressure. Furthermore, the XRD phi (φ) scan demonstrated the six-fold rotational symmetry of the MgGa 2 O 4 films and the epitaxial relationship of 30° between the film and the sapphire substrate. The XPS spectra confirmed the presence of +2 and +3 oxidation state for Mg and Ga respectively, in the films. The direct bandgap of MgGa 2 O 4 films was obtained ~5.27±0.03 eV by analyzing the UV-Vis absorbance spectra using the Tauc equation. The SEM images exhibited a granular surface morphology of the MgGa 2 O 4 films with an increasing trend in the grain size from low to high temperature and pressure. The refractive index and thickness of these films were in the range of ~1.90±0.02 and ~70±2.0 nm, respectively determined by fitting the spectroscopic ellipsometry data.

36 MATERIALS SCIENCE↗

Influence of carrier trapping on radiation detection properties in $\mathrm{CVD}$ grown 4H-SiC epitaxial layers with varying thickness up to 250 µm

We report low doped n-type 4H-SiC epitaxial layers of thickness 50, 150, and 250 µm grown by hot wall chemical vapor deposition were used to fabricate Ni/4H-SiC Schottky radiation detectors. The epitaxial layers were grown on the (0001) face of highly conductive bulk 4H-SiC substrates 8° offcut towards the $\langle 11\bar{2}1\rangle$ direction. The 50, 150, and 250 µm thick epilayer detectors, under optimized settings, showed energy resolutions of 2.0%, 0.78%, and 0.63%, respectively for 5.48 MeV alpha particles. Deep level transient spectroscopy studies showed that the observed variation in the detector resolution is linked to the defect parameters in the devices. Least-squares fitting of the bias dependence of the charge collection efficiency according to a drift-diffusion model, revealed minority carrier diffusion lengths of 16, 10, and 9.2 µm, respectively, implying that the detectors are not limited by minority carrier trapping. The detector performance was observed to be primarily dependent on the concentration and capture cross-sections of the lifetime killing electron traps Z 1/2 and EH 6/7 .

36 MATERIALS SCIENCE↗

Functional properties of Yttrium Iron Garnett thin films on graphene-coated Gd 3 Ga 5 O 12 for remote epitaxial transfer

Remote epitaxial growth via a graphene interlayer and subsequent mechanical exfoliation of a free-standing membrane is a recently developed technique used to transfer complex oxide thin films onto non-native substrates to form heterogeneously integrated structures for various device applications. One such oxide is Yttrium Iron Garnet (YIG), a material of choice for a wide range of magnetoelectric and spintronic devices owing to its strong magnetic properties and low microwave losses. YIG is predominantly grown on lattice matched Gadolinium Gallium Garnet (GGG) substrates, but by utilizing the remote epitaxy technique, high quality YIG films can be transferred from GGG onto another substrate such as piezoelectric Lithium Niobate (LN). Mechanical strain coupling between the layers and magnetostrictive nature of YIG would allow for the investigation of the interplay in YIG/LN structures leading to the design of novel frequency agile magneto-acoustic devices. In this study functional properties of a YIG film grown using PLD on graphene-coated GGG substrate were investigated and compared to traditional YIG on GGG. Both materials were characterized in terms of crystal structure, surface morphology, FMR and Gilbert damping, and Raman and XAS spectroscopy. Further, it was found that YIG on graphene-coated GGG exhibits significantly higher microwave losses than standard YIG on GGG (FMR linewidth 30.9 vs 2.1 Oe at 10 GHz, and Gilbert damping coefficient 15.4x10 -4 vs 3.4x10 -4 respectively), which was attributed to increased concentration of Fe 2+ cations in YIG/Graphene/GGG. While the damping is higher in these studied films compared to YIG grown directly on GGG, the resulting properties are still very favorable compared to many other competing materials which can be grown without the need for lattice matched substrates, such as metallic ferromagnets.

36 MATERIALS SCIENCE↗

Correlation between thickness dependent nanoscale structural chemistry and superconducting properties of ultrathin epitaxial NbN films

NbN-based superconductors have attracted interest for superconducting circuits, quantum computation and high frequency devices. The superconducting properties of NbN films are predominately reliant on the microstructure, therefore, an atomic-level understanding of the structure-chemistry is required to achieve high quality epitaxial NbN films. Here, in this study, the thickness-dependent superconducting properties of NbN films (5, 10, and 50 nm) within NbN/AlN/Al 2 O 3 heterostructures are investigated. NbN and AlN were epitaxially grown by an industrial scale physical vapor deposition technique. The role of nanoscale chemistry on the ultrathin NbN superconducting film is investigated at the atomic level for the first time via atom probe tomography, providing three-dimensional atomic distribution, chemical homogeneity, effect of impurities, specially, in secondary phase formations and interfacial abruptness. The NbN film with 5 nm of thickness demonstrates a superconducting transition temperature of 11.2 K as compared to 50 nm NbN films with a transition temperature of 15.3 K. These thickness dependent variation of superconducting properties are associated with the chemical inhomogeneity in terms of in-plane N:Nb distribution, secondary phase formations and NbN/AlN interfacial abruptness as a function of the NbN films thicknesses. The analysis depicts the interplay between the surface/interface and the superconducting properties of ultrathin NbN films. These results provide insights on material design and growth that will enable the development of optimized superconducting NbN films for quantum devices.

36 MATERIALS SCIENCE↗

Exploring the interfacial structure and crystallinity for direct growth of Mn 3 Sn(0001) on sapphire (0001) by molecular beam epitaxy

The Kagome antiferromagnet Mn 3 Sn has garnered a lot of attention due to the presence of interesting properties such as anomalous Hall effects and Nernst effects. Until now, few papers have been reported to grow using molecular beam epitaxy with a buffer layer or on other substrates. In this paper, we discuss the synthesis of crystalline Mn 3 Sn layers, prepared on Al 2 O 3 (0001) without a buffer layer using molecular beam epitaxy. The growth is monitored in-situ using reflection high energy electron diffraction and measured ex-situ using X-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. The samples were deposited at 524 ± 5 °C, with an Mn: Sn atomic flux ratio of 3.2:1 for 90 minutes. Orientation relationships between the Mn 3 Sn films and the sapphire substrates are determined from in-plane and out-of-plane measurements. Our analysis indicates that the resulting film is predominantly c−plane oriented. Lastly, the samples prepared in this way were found to be discontiguous, showing a 3-dimensional morphology. According to first-principles calculations, the Mn 3 Sn exhibits a displaced Kagome structure in the very first stages of growth, for 2ML and 4ML growth on Al 2 O 3 (0001). This result is corroborated by calculating the surface formation energies and explains the observed RHEED patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation and coarsening of epitaxially-supported metal nanoclusters

This mini-review describes developments over the last ~30 years in characterizing the nucleation & growth of epitaxially-supported metal nanoclusters (NCs) or islands during vapor deposition, as well as their post-deposition coarsening. A beyond-mean-field treatment for homogeneous nucleation & growth corrects the deficiencies of traditional treatments in describing, e.g., the island size distribution, but also necessitates consideration of the spatial distribution of islands and their capture zones. We discuss advances in modeling capabilities, including those based upon on an ab-initio level treatment of periphery diffusion kinetics, for description of the non-equilibrium growth shapes of these NCs, focusing on 2D NCs. For post-deposition coarsening of arrays of NCs, there is generally a competition between Ostwald Ripening (OR) and Smoluchowski Ripening (SR). SR is also known as Particle Migration & Coalescence. For 2D NCs in homoepitaxial systems, conventional OR is observed on pristine fcc(111) surfaces, dramatically enhanced OR in the presence of even trace amounts of chalcogens for Cu(111) and Ag(111), and anomalous OR on anisotropic fcc(110) surfaces. The unexpected discovery of SR for fcc(100) homoepitaxial systems prompted extensive analysis of the underlying diffusivities of 2D NCs as a function of size, as well as of NC coalescence dynamics. A comprehensive understanding of these processes is now available. Self-assembly of 3D NCs during deposition, issues related to heterogeneous nucleation, directed assembly, NC growth structure selection, and coarsening are addressed. Finally, for SR of 3D epitaxial NCs, recent insights into the size-dependence of diffusivity are described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Planarizing Growth Conditions on Unpolished and Faceted (100)-Oriented GaAs Substrates Using Hydride Vapor Phase Epitaxy

Here we performed a design of experiments (DoE) analysis to determine the effect of various growth parameters on in situ planarizing overgrowth of rough substrates using hydride vapor phase epitaxy (HVPE). We used two types of rough (100)-oriented GaAs substrates to compare the effect of the initial morphology on the epitaxial growth behavior: an irregular, as-cut surface resultant from cutting the wafer from a GaAs boule and a regularly faceted surface produced by controlled spalling. The DoE analysis identified trends in the overgrowth behavior with changing growth conditions, and we used these trends to design favorable planarization growth conditions for each surface type. These favorable conditions enabled full planarization of a spalled surface with >2.5 um facet height within 10.8 min of growth. The root mean squared (RMS) surface roughness of the resulting (100) surface was 24.5 nm over a 286 um x 215 um area. Our results show that planarization growth by HVPE is a promising technique to enable device growth directly on rough substrates, and the trends revealed through DoE analysis indicate a path toward further optimization of planarization growth conditions for as-cut and spalled surfaces.

14 SOLAR ENERGY↗

Halide Vapor Phase Epitaxy of Ge from an Elemental Source

Halide vapor phase epitaxy shows promise for low-cost photovoltaic device manufacturing because of its high growth rates and lower cost elemental precursors but previously has not been used to deposit epitaxial Ge. Here, we demonstrate Ge deposition by generating GeCl 2 in situ from solid Ge and HCl in a N 2 ambient. To achieve Ge growth, we inject AsH 3 and PH 3 as sources of active hydrogen to the growth surface to create a driving force for growth. We do not observe Ge growth unless a supply of hydrogen is added, consistent with thermodynamic calculations. Furthermore, we show the hydrogen source must crack readily on the substrate surface to enable growth; relatively stable sources such as H 2 do not cause growth. Unintentional group V doping is one drawback of using AsH 3 and PH 3 to drive the Ge reaction. We observed As or P concentrations in the Ge films ranging from 4 x 10 17 to 1 x 10 18 atoms/cm 3 , concentrations that can drastically influence device characteristics. However, we note there are numerous other "helper molecule" options that can provide active hydrogen without doping or etching the material. This work provides a path forward for Ge deposition for optoelectronic devices from an elemental source.

14 SOLAR ENERGY↗

Adatom-Driven Oxygen Intermixing during the Deposition of Oxide Thin Films by Molecular Beam Epitaxy

Thin film deposition from the vapor phase is a complex process involving adatom adsorption, movement, and incorporation into the growing film. While simulations have been able to capture key aspects of these processes to reproduce film morphology, these models typically ignore any subsurface diffusion that occurs. The results of these diffusion and intermixing processes are often observed experimentally, but cannot be explained by invoking bulk lattice diffusion at the deposition temperature. In this work, we present quantitative experimental data that reveals anion and cation intermixing over long length scales during the deposition of epitaxial Fe 2 O 3 and Cr 2 O 3 films and heterostructures by oxygen-plasma-assisted molecular beam epitaxy. We track this diffusion by incorporating well-defined tracer layers containing 18 O and/or 57 Fe, and measure their redistribution on the nanometer scale with atom probe tomography. Molecular dynamics simulations suggest potential intermixing events, which are then examined via nudged elastic band calculations. These reveal that adatoms on the film surface act to “pull up” subsurface O and Fe. Subsequent ring-like rotation mechanisms involving both adatom and subsurface anions then facilitate their mixing. A simple model incorporating these events qualitatively agrees with the experimental intermixing results. In addition to film deposition, these intermixing mechanisms may to be operant during other surface-mediated processes such as heterogeneous catalysis and corrosion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗