Search NASA⌕ Search

SEARCH · Search NASA

Results for “fast charge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Reversible dual anionic-redox chemistry in NaCrSSe with fast charging capability

Utilizing the anionic redox reaction opens new approaches for the development of new cathode materials with extra capacities. Although, it suffers from several obstacles such as voltage hysteresis and sluggish kinetics. In this paper, a new layered chalcogenide-based on dual anionic-redox reaction is reported. The newly designed layered NaCrSSe exhibits the capacity of almost all Na + intercalation/deintercalation (137 mAh/g -1 at 50 mA/g), and a unique charge/discharge feature with a small polarization of 0.15 V and high energy efficiency of ~92% in initial cycles. Furthermore, a superior high-rate charge capacity of 115.5mAh/g -1 (83.7% retention) was achieved at 27.8 C (4000 mA/g -1 ). Systematic characterization studies on structure evolution and DFT calculation show the charge compensation of S and Se anions during cycling. Overall, these results will enrich the anion redox chemistry and provide valuable information for developing new anion-redox based cathode materials with high capacity and fast kinetics.

25 ENERGY STORAGE↗
DOE OSTI2019

Photo-accelerated fast charging of lithium-ion batteries

Due to their exceptional high energy density, lithium-ion batteries are of central importance in many modern electrical devices. A serious limitation, however, is the slow charging rate used to obtain the full capacity. Thus far, there have been no ways to increase the charging rate without losses in energy density and electrochemical performance. Here we show that the charging rate of a cathode can be dramatically increased via interaction with white light. We find that a direct exposure of light to an operating LiMn 2 O 4 cathode during charging leads to a remarkable lowering of the battery charging time by a factor of two or more. This enhancement is enabled by the induction of a microsecond long-lived charge separated state, consisting of Mn 4+ (hole) plus electron. This results in more oxidized metal centers and ejected lithium ions are created under light and with voltage bias. We anticipate that this discovery could pave the way to the development of new fast recharging battery technologies.

25 ENERGY STORAGE↗
DOE OSTI2024

Fast Charge‐Transfer Rates in Li‐CO 2 Batteries with a Coupled Cation‐Electron Transfer Process

Li-CO 2 batteries with a high theoretical energy density (1876 Wh kg −1 ) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO 2 batteries is limited to low current densities (mainly <0.2 mA cm −2 ) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb 0.67 Bi 1.33 X 3 (X = S, Te) enable operation of the Li-CO 2 battery at a very high current rate of 1 mA cm −2 for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO 2 RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO 2 molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO 2 chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Overcoming the Intrinsic Limitations of Fast Charging Lithium‐Ion Batteries Using Integrated Acoustic Streaming

A lithium‐ion battery's maximum charge rate and energy density are intrinsically limited by the ion diffusion rate in the electrolyte. Most research focuses on materials science solutions to this problem, with gradual improvement over the years. A mechanical solution is proposed to integrate an MHz‐order frequency surface acoustic wave (SAW) device into an existing 1.8 Ah multilayered Li‐ion pouch cell to enhance the ion diffusion rate and the overall battery performance. Both the charging rate and cycling lifetime are improved from SAW. At a 6C (10 min) charge and C/3 discharge rate, typical of electric vehicle applications, integrating SAW into the Li‐ion cell doubles the energy density and maintains at least 72% of the battery's initial capacity after 2000 cycles. Moreover, using SAW quantifiably reduces battery degradation in these conditions as determined by optical imaging, scanning electron microscopy, X‐ray diffraction, and neutron diffraction. The use of SAW appears to offer a method to avoid undesirable Li metal plating on the graphite anode during charging, and leads to a much longer battery lifetime and good charge capacity, all despite rapid charging.

Huang, An↗
DOE OSTI2021

Parametric analysis of anodic degradation mechanisms for fast charging lithium batteries with graphite anode

In this work, we report the impact of the temperature-driven synergistically-coupled anodic degradation mechanisms on the electrochemical performance of lithium batteries with graphite anode over multiple cycles. Temperature dependence of electrochemical reactions and damage mechanisms, such as solid electrolyte interface (SEI) growth, lithium plating/stripping, dead lithium storage/dissolution, and film cracking are incorporated into the degradation model. Results of a parametric analysis are presented, evaluating the effects of charging rates (1–6 C), operating temperatures (-15 – 45°C) and electrode design parameters, on the relative performance fade in the lithium-ion battery. Thermo-electrochemical process maps are developed to provide insights into the relationship between electrode performance and failure mechanisms. The simulation results predict a severe capacity loss due to lithium plating at low temperatures, which is further aggravated at high charging rates. A common strategy for mitigating lithium plating, through charging at high temperatures, also results in rapid capacity loss due to accelerated SEI formation. Simulation results are used to identify the combination of operating conditions and electrode design parameters that improve the electrochemical performance of the battery. These results demonstrate an opportunity to design safe and high-performance lithium-ion batteries, guided by anodic degradation models.

Battery design↗
DOE OSTI2020

Toward a high-voltage fast-charging pouch cell with TiO 2 cathode coating and enhanced battery safety

Nickel-rich layered lithium transition metal oxides, LiNi x Co y Mn 1-x-y O 2 , are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. In this work full batteries with uncoated and TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO 2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO 2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 as cathode material was 257 °C, which was higher than that of the battery with the uncoated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (251 °C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

25 ENERGY STORAGE↗
DOE OSTI2020

Titanium Niobium Oxide: From Discovery to Application in Fast-Charging Lithium-Ion Batteries

Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to industrial-scale products. This Perspective describes that journey for a new lithium-ion battery anode material, TiNb 2 O 7 (TNO). TNO is intended as an alternative to graphite or Li 4 Ti 5 O 12 with better rate and safety characteristics than the former and higher energy density than the latter. The high capacity of TNO stems from the multielectron redox of Nb 5+ to Nb 3+ , its operating voltage window well above the Li + /Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was nonlinear and nontrivial. Its history is built on 30 years of fundamental science that preceded its application as a battery anode, and its battery development included a nearly 30-year gap. The insights and lessons contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb 2 O 7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight briefly some of the challenges faced when scaling up a new material that affect TiNb 2 O 7 as well as new electrode candidates more generally.

25 ENERGY STORAGE↗
DOE OSTI2025

Metallicity, Atomic Disorder, and Li-Ion Storage in Fast-Charging Anodes

Oxides of Nb with Wadsley-Roth shear structures comprise a family of stable, high-rate anode materials for Li-ion batteries. A particular pair of them offers the unusual opportunity to test how important metallic conduction of the starting electrode is for electrode performance. The selected pair of compounds with similar 4 × 3 Wadsley-Roth block structures are insulating Ti 2 Nb 10 O 29 and metallic Nb 12 O 29 . A combination of diffraction, electrochemistry, magnetic measurements, and entropic potential measurements is employed to establish key findings for these two anode materials. We find that starting with a metallic oxide is not especially advantageous over a comparable material that readily transitions into a metallic state upon lithiation. Second, the rate performance appears to be dictated by ion mobility, and atomic Ti/Nb disorder in Ti 2 Nb 10 O 29 contributes to improved capacity retention at high rates by suppressing Li-ion ordering. However, subtle details in the nature of redox processes make Nb 12 O 29 a slightly better electrode material for long-term cycling at slower rates.

crystal structure↗
DOE OSTI2022

Production of fast-charge Zn-based aqueous batteries via interfacial adsorption of ion-oligomer complexes

Abstract Aqueous zinc batteries are attracting interest because of their potential for cost-effective and safe electricity storage. However, metallic zinc exhibits only moderate reversibility in aqueous electrolytes. To circumvent this issue, we study aqueous Zn batteries able to form nanometric interphases at the Zn metal/liquid electrolyte interface, composed of an ion-oligomer complex. In Zn||Zn symmetric cell studies, we report highly reversible cycling at high current densities and capacities (e.g., 160 mA cm −2 ; 2.6 mAh cm −2 ). By means of quartz-crystal microbalance, nuclear magnetic resonance, and voltammetry measurements we show that the interphase film exists in a dynamic equilibrium with oligomers dissolved in the electrolyte. The interphase strategy is applied to aqueous Zn||I 2 and Zn||MnO 2 cells that are charged/discharged for 12,000 cycles and 1000 cycles, respectively, at a current density of 160 mA cm −2 and capacity of approximately 0.85 mAh cm −2 . Finally, we demonstrate that Zn||I 2 -carbon pouch cells (9 cm 2 area) cycle stably and deliver a specific energy of 151 Wh/kg (based on the total mass of active materials in the electrode) at a charge current density of 56 mA cm −2 .

25 ENERGY STORAGE↗