Search NASA⌕ Search

SEARCH · Search NASA

Results for “feedback controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Application of a Virtual Reactivity Feedback Control Loop in Non-Nuclear Testing of a Fast Spectrum Reactor

For a compact, fast-spectrum reactor, reactivity feedback is dominated by core deformation at elevated temperature. Given the use of accurate deformation measurement techniques, it is possible to simulate nuclear feedback in non-nuclear electrically heated reactor tests. Implementation of simulated reactivity feedback in response to measured deflection is being tested at the NASA Marshall Space Flight Center Early Flight Fission Test Facility (EFF-TF). During tests of the SAFE-100 reactor prototype, core deflection was monitored using a high resolution camera. "virtual" reactivity feedback was accomplished by applying the results of Monte Carlo calculations (MCNPX) to core deflection measurements; the computational analysis was used to establish the reactivity worth of van'ous core deformations. The power delivered to the SAFE-100 prototype was then dusted accordingly via kinetics calculations, The work presented in this paper will demonstrate virtual reactivity feedback as core power was increased from 1 kilowatt(sub t), to 10 kilowatts(sub t), held approximately constant at 10 kilowatts (sub t), and then allowed to decrease based on the negative thermal reactivity coefficient.

Bragg-Sitton, Shannon M.↗

The LQR/LTR procedure for multivariable feedback control design

This paper provides a tutorial overview of the linear quadratic Gaussian with loop transfer recovery (LQG/LTR) design procedure for linear multivariable feedback systems. LQR/LTR is interpreted as the solution of a specific weighted H-squared tradeoff between transfer functions in the frequency domain. Properties of this solution are examined for both minimum-phase and nonminimum-phase systems. This leads to a formal weight augmentation procedure for the minimum-phase case which permits essentially arbitrary specification of system sensitivity functions in terms of the weights. While such arbitrary specifications are not possible for nonminimum-phase problems, a direct relationship between weights and sensitivities is developed for nonminimum-phase SISO and certain nonminimum-phase MIMO cases which guides the weight selection process.

Stein, Gunter↗

Wide power range microwave feedback controller

A substantially constant power level is derived over a predetermined frequency band, in each of a plurality of relatively widely spaced power ranges, from a microwave load having a predetermined amplitude versus frequency response, such as an antenna. A microwave source of substantially constant amplitude drives a forward path connected between the source and the load. A feedback path responsive to the microwave power level in the forward path derives a control voltage for the PIN attenuator. The equalizer attenuator drives a linear, crystal amplitude detector. Attenuating means included in the forward and feedback paths are selectively connected in circuit to maintain the power level of the microwave input to the amplitude detector substantially constant, even though different power ranges are supplied to the load by the forward path.

Titus, L. E.↗

Ecohydrologic processes and soil thickness feedbacks control limestone-weathering rates in a karst landscape

Here, chemical weathering of bedrock plays an essential role in the formation and evolution of Earth's critical zone. Over geologic time, the negative feedback between temperature and chemical weathering rates contributes to the regulation of Earth climate. The challenge of understanding weathering rates and the resulting evolution of critical zone structures lies in complicated interactions and feedbacks among environmental variables, local ecohydrologic processes, and soil thickness, the relative importance of which remains unresolved. We investigate these interactions using a reactive-transport kinetics model, focusing on a low-relief, wetland-dominated karst landscape (Big Cypress National Preserve, South Florida, USA) as a case study. Across a broad range of environmental variables, model simulations highlight primary controls of climate and soil biological respiration, where soil thickness both supplies and limits transport of biologically derived acidity. Consequently, the weathering rate maximum occurs at intermediate soil thickness. The value of the maximum weathering rate and the precise soil thickness at which it occurs depend on several environmental variables, including precipitation regime, soil inundation, vegetation characteristics, and rate of groundwater drainage. Simulations for environmental conditions specific to Big Cypress suggest that wetland depressions in this landscape began to form around beginning of the Holocene with gradual dissolution of limestone bedrock and attendant soil development, highlighting large influence of age-varying soil thickness on weathering rates and consequent landscape development. While climatic variables are often considered most important for chemical weathering, our results indicate that soil thickness and biotic activity are equally important. Weathering rates reflect complex interactions among soil thickness, climate, and local hydrologic and biotic processes, which jointly shape the supply and delivery of chemical reactants, and the resulting trajectories of critical zone and karst landscape development.

54 ENVIRONMENTAL SCIENCES↗

Optimal limited state variable feedback controllers for linear systems.

Optimized static and dynamic linear system compensator designs with a priori fixed dimensions are discussed. Expressions are derived to determine the parameters of these designs, including the fixed-gain output feedback, the time-varying output feedback, and time-invariant compensation. A relevant deterministic off-line optimization problem is formulated, and the properties of a solution to the problem are analyzed. A unified design philosophy for limited state-variable control problems of essentially deterministic systems is developed. The philosophy incorporates design constraints, a careful selection of performance criteria, and interpretation of the results.

Levine, W. S.↗

Feasibility of a feedback control of atomic self-organization in an optical cavity

Many interesting nonlinear effects are based on the strong interaction of motional degrees of freedom of atoms with an optical cavity field. Among them is the spatial self-organization of atoms in a pattern where the atoms group in either odd or even sites of the cavity-induced optical potential. An experimental observation of this effect can be simplified by using, along with the original cavity-induced feedback, an additional electronic feedback based on the detection of light leaking the cavity and the control of the optical potential for the atoms. Following our previous study, we show that this approach is more efficient from the laser power perspective than the original scheme without the electronic feedback.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Role of Internal Variability and Feedbacks Controlling AMOC Stability

A bi-stable mode of the Atlantic Meridional Overturning Circulation (AMOC) is found in a 10-member ensemble simulation of the SSP2-4.5 scenario using the NASA GISS-E2-1-G climate model. Local feedbacks in the subpolar North Atlantic region in conjunction with internal variability in sea-ice transport and melt play a critical role in causing the divergent behavior of the AMOC in the ensemble members. While other fully coupled models have demonstrated the important role of surface freshening in leading to AMOC shutdown, either through hosing experiments or increased precipitation and greenhouse gas warming at high latitudes, in the GISS simulations, there are no external freshwater perturbations. This is the first time that a CMIP-class model has shown such a bifurcation across an initial condition ensemble.

Atlantic Meridional Overturning Circulation↗

Exact methods for modal transient response analysis including feedback control

This paper presents a modal method for the analysis of controlled structural systems that retains the uncoupled nature of the classical transient response analysis of a structure subjected to a prescribed time-varying load. The control force is expanded as a Taylor series that remains on the right side of the equations, and it does not lead to a computational approach that requires coupling between modes on the left side. Retaining a sufficient number of terms in the series produces a solution to the modal equations that is accurate to machine precision. The approach is particularly attractive for large problems in which standard matrix exponential methods become computationally prohibitive. Numerical results are presented to show the accuracy and efficiency of the proposed approach for dynamic feedback compensation of a truss structure with local member modes in the controller bandwidth.

Anderson, Melvin S.↗

Design of multivariable feedback control systems via spectral assignment using reduced-order models and reduced-order observers

The feasibility of using reduced order models and reduced order observers with eigenvalue/eigenvector assignment procedures is investigated. A review of spectral assignment synthesis procedures is presented. Then, a reduced order model which retains essential system characteristics is formulated. A constant state feedback matrix which assigns desired closed loop eigenvalues and approximates specified closed loop eigenvectors is calculated for the reduced order model. It is shown that the eigenvalue and eigenvector assignments made in the reduced order system are retained when the feedback matrix is implemented about the full order system. In addition, those modes and associated eigenvectors which are not included in the reduced order model remain unchanged in the closed loop full order system. The full state feedback design is then implemented by using a reduced order observer. It is shown that the eigenvalue and eigenvector assignments of the closed loop full order system rmain unchanged when a reduced order observer is used. The design procedure is illustrated by an actual design problem.

Mielke, R. R.↗

Design of multivariable feedback control systems via spectral assignment using reduced-order models and reduced-order observers

The feasibility of using reduced order models and reduced order observers with eigenvalue/eigenvector assignment procedures is investigated. A review of spectral assignment synthesis procedures is presented. Then, a reduced order model which retains essential system characteristics is formulated. A constant state feedback matrix which assigns desired closed loop eigenvalues and approximates specified closed loop eigenvectors is calculated for the reduced order model. It is shown that the eigenvalue and eigenvector assignments made in the reduced order system are retained when the feedback matrix is implemented about the full order system. In addition, those modes and associated eigenvectors which are not included in the reduced order model remain unchanged in the closed loop full order system. The fulll state feedback design is then implemented by using a reduced order observer. It is shown that the eigenvalue and eigenvector assignments of the closed loop full order system remain unchanged when a reduced order observer is used. The design procedure is illustrated by an actual design problem.

Mielke, R. R.↗

Simplified feedback control system for scanning tunneling microscopy

A Scanning Tunneling Microscope (STM) is one of the most important scanning probe tools available to study and manipulate matter at the nanoscale. In a STM, a tip is scanned on top of a surface with a separation of a few Å. Often, the tunneling current between the tip and the sample is maintained constant by modifying the distance between the tip apex and the surface through a feedback mechanism acting on a piezoelectric transducer. This produces very detailed images of the electronic properties of the surface. The feedback mechanism is nearly always made using a digital processing circuit separate from the user computer. Here, we discuss another approach using a computer and data acquisition through the universal serial bus port. We find that it allows successful ultralow noise studies of surfaces at cryogenic temperatures. We show results on different compounds including a type II Weyl semimetal (WTe2), a quasi-two-dimensional dichalcogenide superconductor (2H–NbSe2), a magnetic Weyl semimetal (Co3Sn2S2), and an iron pnictide superconductor (FeSe).

Martín-Vega, Francisco (ORCID:0000000333177833)↗

Ponderomotive stabilization of flute modes in mirrors Feedback control and numerical results

Ponderomotive stabilization of rigid plasma flute modes is numerically investigated by use of a variational principle, for a simple geometry, without eikonal approximation. While the near field of the studied antenna can be stabilizing, the far field has a small contribution only, because of large cancellation by quasi mode-coupling terms. The field energy for stabilization is evaluated and is a nonnegligible fraction of the plasma thermal energy. A new antenna design is proposed, and feedback stabilization is investigated. Their use drastically reduces power requirements.

Similon, P. L.↗

Adaptive model tuning studies for non-invasive diagnostics and feedback control of plasma wakefield acceleration at FACET-II

Beam-driven plasma wakefield acceleration (PWFA) achieves the same energy gain in a single meter, for which conventional accelerators require several kilometers, however much work is still required to match the beam quality of conventional accelerators. The PWFA processes to be studied at the FACET-II facility will utilize extremely short (down to a few fs) high energy (10 GeV), high charge (few nC) electron and eventually positron bunches. The PWFA process is extremely sensitive to the detailed longitudinal current profiles of these bunches and it would be of great benefit to have precise measurement and control of these profiles. We present an adaptive model tuning technique for FACET-II to adaptively tune online models based on real time accelerator and beam data to continuously provide a non-invasive diagnostic which predicts the longitudinal phase space (LPS) of extremely short and highly compressed electron beams, which otherwise require destructive X-band transverse deflecting cavity (XTCAV)-based measurements. Based on simulation studies, our method has the potential for: (1). The development of a non-invasive longitudinal phase space diagnostic by adaptively tuning models based on non-invasive measurements such as energy spread spectra which could be recorded at all of the bunch compressors in the facility. (2). Utilize these diagnostic to perform model-independent feedback-based to achieve desired longitudinal phase space distributions. (3). Utilize the model-independent feedback approach to maximize energy gain while minimizing emittance growth and energy gain variance of the PWFA process by tuning accelerator parameters, while monitoring what longitudinal phase space the algorithm has found, information that will be useful for further analytical and simulation studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phenolic compounds and black carbon feedback controls on peat decomposition and carbon accumulation in southeastern peatlands under regimes of seasonal drought, drainage and frequent fire

Peatlands store one-third of soil C in terrestrial ecosystems and have persisted through changing climate over millennia from the arctic to the tropics. Approximately one-third of peat stores are found in subtropical and tropical peatlands (STPs) formed from high-lignin woody biomass. In this project, our questions are: 1) why do these non-sphagnum peatlands (STPs) accumulate C under warmer-drier climates and 2) how might insights coming from studying control mechanisms in STPs improve the management and conservation of the vast C stores in boreal peatlands subject to increasing climate forcing. We hypothesized that a dual control or “latch mechanism” reduces decomposition in shrub/tree communities in STPs due to both (1) higher production of polyphenol and aromatic compounds in STPs than found in northern Sphagnum/Carex communities and (2) the buildup of recalcitrant organic matter produced by light fire-drought-warming-adapted communities, together leading to a reduction in the microbial decay rate of peat. After three-years of intensive biological and chemical analysis in a series of field and microcosm experiments along our north to south bog gradient from Minnesota to Peru, we show how previously unrecognized biotic factors, particularly dynamic interlinked above- and belowground attributes control C sequestration in peatlands. Our key findings include (1) phenolics-bridged plant-microbe symbioses, principally slow-growing microbes dominated in higher phenolic wooded STPs, preserving C in peatlands under climate change, 2) phenolics are the overarching factor controlling the relative abundance of slow-and fast-growing microbes, the slow-growing microbes in STPs metabolize C slowly and are inherently resistant to disturbance, 3) global data analysis shows that soil respiration does not increase exponentially from boreal to tropical peatlands, suggesting that slow-growing microbes may have become dominant in most non-boreal peatlands, 4) peat chemistry analysis from over 2000 samples show that across peatlands both from the arctic to tropics and from high to low elevation peatlands recalcitrance increases as aromatic content increases, and 5) peat affected by low-severity wildfires displays a similar pattern of higher aromatic content. Our findings all demonstrate links between peat recalcitrance and increased content of phenolics and other aromatic compounds in plants. Thus, linked plant–microbe symbiotic traits are a key to understanding ecological resilience and resistance developed in peatlands under disturbance. New trait-based approaches that can better link above-and below ground processes are needed to advance both the accuracy and precision of current abiotic-factor-based Earth system models in predicting future soil C responses to climate-change feedbacks.

54 ENVIRONMENTAL SCIENCES↗