SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A method is developed for improving the stability of linear multivariable systems using output feedback. The technique, which utilizes a gradient approach, has been mechanized in a digital computer program. Illustrative results are given for a seven-state two-feedback model of the Saturn V booster.
A method is described for determining the realizability of a sequential machine with trigger or set-reset flip-flop memory elements when the feedback of the machine is given by a Boolean function. Feedbacks in several types of sequential machines with different memory elements are compared, showing the memory specifications allowing the realization of such machines.
By use of the spectral theory of linear operators, necessary and sufficient conditions are derived for the stability of a class of discrete time feedback systems with a periodically time-varying feedback gain. These conditions involve a Nyquist plot for an equivalent time-invariant system which may be determined from the frequency response function of the system under consideration. In the special case of a scalar-input scalar-output system, these conditions may be given in a particularly simple form.
An energy-ratio function is introduced which greatly facilitates analysis and signal design for center-of-gravity feedback communication schemes. Using this function, we show that center-of-gravity feedback using regular-simplex signals achieves Shannon's lower bound on average energy per transmission for zero error probability if M, the number of messages, is 3, 4, or 5 and there is no constraint on system bandwidth.
A continuous time, single input-single output, linear, time-invariant, distributed feedback system F sup epsilon, containing a small delay of length epsilon in the loop, is considered. Conditions are given under which L2-stability and L2-instability of this feedback system can be deduced from those of the reduced model obtained by neglecting the delay. The two system models associated with F sup epsilon are the low-frequency model F and the high frequency model F. The condition for neglecting the small delay is the L2-stability of the family of high-frequency models, where epsilon or = 0 is sufficiently small. A lemma and a theorem are given. The lemma gives sharp Nyquist-type conditions for the L2-stability and L2-instability of the family of high frequency models for sufficiently small epsilon or = 0, while the Theorem gives explicit conditions under which the small delay may or may not be neglected.
The ASDTIC (analog signal to discrete time interval converter) control subsystem provides precise output control of high performance aerospace power supplies. The key to ASDTIC operation is that it stably controls output by sensing output energy change as well as output magnitude. The ASDTIC control subsystem and control module were developed to improve power supply performance during static and dynamic input voltage and output load variations, to reduce output voltage or current regulation due to component variations or aging, to maintain a stable feedback control with variations in the loop gain or loop time constants, and to standardize the feedback control subsystem for power conditioning equipment.
Linear time-invariant feedback systems with multiple inputs and multiple outputs are examined. It is demonstrated that no loss of generality takes place considering the feedback to be unity. Necessary and sufficient conditions are derived for the closed-loop impulse response to be stable in a prescribed sense.
A minimax design method is applied to the problem of obtaining an acceptable output feedback matrix for linear multivariable systems with parameter uncertainty. The result is a set of nonlinear matrix equations (similar to those obtained by Levine and Athans (1970)), which must be solved for the feedback matrix. An example illustrates the technique and the fact that better results are achieved for large parameter variation than with a purely nominal design.
The ASDTIC (Analog Signal to Discrete Time Interval Converter) control subsystem provides precise output control of high performance aerospace power supplies. The key to ASDTIC operation is that it stably controls output by sensing output energy change as well as output magnitude. The ASDTIC control subsystem and control module were developed to improve power supply performance during static and dynamic input voltage and output load variations, to reduce output voltage or current regulation due to component variations or aging, to maintain a stable feedback control with variations in the loop gain or loop time constants, and to standardize the feedback control subsystem for power conditioning equipment.
The loop transformation technique (Sandberg, 1965; Zames, 1966, Willems, 1971), and the fixed point theorem (Schwartz, 1970) are used to derive the L(superscript-p) stability for a class of multivariable nonlinear time-varying feedback systems which are open-loop unstable. The application of the fixed point theorem in L(superscript-p) shows that the nonlinear feedback system has one and only one solution for any pair of inputs in L(superscript-p), that the solutions are continuously dependent on the inputs, and that the closed loop system is L(superscript-p)-stable for any p ranging from 1 to infinity.
Precision of feedback gain was manipulated in a simple positioning task. An optimum was found; an increase in precision past that optimum produced deleterious effects upon rate of acquisition. In a second study, increasing postfeedback interval removed that optimum. The feedback precision effects were then replicated in a timing task. The combined results of the 3 studies were interpreted as supportive of an information-processing approach to the study of postfeedback interval events for simple motor skills. The findings additionally supported specific predictions by Bilodeau and deductions from Adams' 1971 theory of motor learning.
A one dimensional compensatory tracking task and a digit processing reaction time task were combined in a three phase experiment designed to investigate tracking performance in time sharing. Adaptive techniques, elaborate feedback devices, and on line standardization procedures were used to adjust task difficulty to the ability of each individual subject and manipulate time sharing demands. Feedback control analysis techniques were employed in the description of tracking performance. The experimental results show that when the dynamics of a system are constrained, in such a manner that man machine system stability is no longer a major concern of the operator, he tends to adopt a first order control describing function, even with tracking systems of higher order. Attention diversion to a concurrent task leads to an increase in remnant level, or nonlinear power. This decrease in linearity is reflected both in the output magnitude spectra of the subjects, and in the linear fit of the amplitude ratio functions.
A model of the human arm, emphasizing the neuromuscular mechanisms of feedback control, has been constructed. The various parameters and functions of physiological receptors in the feedback section have been classified into an automated category that can be incorporated in the prosthesis servo loop, and into a sensory category that should be communicated to the operator if control and dynamic performance are to be optimized. A scheme for simultaneous display of two such sensory parameters, i.e., fingertip pressure and elbow position, has been developed, implemented and evaluated. The neurophysiological mechanism of such displays, and the feasibility of sensory transformation, is discussed in this paper.
In order to accommodate a quadrature amplitude-shift-keyed (QASK) signal, Simon and Smith (1974) have modified the decision-feedback loop which tracks a quadrature phase-shift-keyed (QPSK). In the investigation reported approaches are considered to modify the loops in such a way that offset QASK signals can be tracked, giving attention to the special case of an offset QPSK. The development of the stochastic integro-differential equation of operation for a decision-feedback offset QASK loop is discussed along with the probability density function of the phase error process.
The use of zeolite crystals in distributed feedback crystal cavities for X-ray emissions is proposed. The zeolite crystals can guide the emitted X rays and can also generate the feedback necessary for self-sustained oscillation. A table lists the parameters of some typical zeolite crystals.
Because conventional optimal linear regulator theory results in a controller which requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. To this effect a stochastic linear model has been developed that accounts for process parameter and initial uncertainty, measurement noise, and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was then performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell. Results using a seventh order process show the proposed procedures to be very effective.
The design procedure of feedback controllers was described and the considerations for the selection of the design parameters were given. The frequency domain properties of single-input single-output systems using state feedback controllers are analyzed, and desirable phase and gain margin properties are demonstrated. Special consideration is given to the design of controllers for tracking systems, especially those designed to track polynomial commands. As an example, a controller was designed for a tracking telescope with a polynomial tracking requirement and some special features such as actuator saturation and multiple measurements, one of which is sampled. The resulting system has a tracking performance comparing favorably with a much more complicated digital aided tracker. The parameter sensitivity reduction was treated by considering the variable parameters as random variables. A performance index is defined as a weighted sum of the state and control convariances that sum from both the random system disturbances and the parameter uncertainties, and is minimized numerically by adjusting a set of free parameters.
Because application of conventional optimal linear regulator theory to flight controller design requires the capability of measuring and/or estimating the entire state vector, it is of interest to consider procedures for computing controls which are restricted to be linear feedback functions of a lower dimensional output vector and which take into account the presence of measurement noise and process uncertainty. Therefore, a stochastic linear model that was developed is presented which accounts for aircraft parameter and initial uncertainty, measurement noise, turbulence, pilot command and a restricted number of measurable outputs. Optimization with respect to the corresponding output feedback gains was performed for both finite and infinite time performance indices without gradient computation by using Zangwill's modification of a procedure originally proposed by Powell. Results using a seventh order process show the proposed procedures to be very effective.