Search NASA⌕ Search

SEARCH · Search NASA

Results for “free energy sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Aluminophosphate Waste Forms for Immobilizing Cations from Electrochemical Salt Wastes

This report provides experimental details and results of evaluating aluminophosphate waste forms for treating and immobilizing the salt cations from salt wastes generated during electrochemical reprocessing of used nuclear fuel. In the waste form process for these materials, chloride salt streams are reacted with NH 4 H 2 PO 4 , the chlorine is removed from the salts and driven off as NH 4 Cl (a solid condensate that can be captured), and then the product can be vitrified in conjunction with glass-forming chemicals (e.g., Fe 2 O 3 , Al 2 O 3 ) to create a high-durability waste form. This study was initiated with some literature review on aluminophosphates containing high alkali oxide content and some of this information is summarized in this report. Following literature review, three new samples were synthesized where two contained Fe 2 O 3 +Al 2 O 3 (i.e., samples G3 and G5 ) and one was only Al 2 O 3 (Fe 2 O 3 -free) (i.e., sample G6 ). In addition to these samples, G1 was also made, which is the baseline reference waste form referred to as DPF5-336 (made without Al 2 O 3 ). Samples G1, G3, G5, and G6 had phases of Li 3 Fe 2 (PO 4 ) 3 (likely), monazite (below XRD detection limits), AlPO 4 , and AlPO 4 , respectively. Characterizations on these materials included optical images, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. These samples were shipped to Argonne National Laboratory for chemical durability testing. Depending on how the samples perform in these tests, an additional phase of aluminophosphate formulations could be designed and tested. This report completes the milestone M4FT-23PN030104041 with details provided in Appendix B.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Thermodynamic stability of elemental boron allotropes with varying numbers of interstitial atoms

Elemental boron exists in multiple allotropes, each characterized by structures containing icosahedral subunits. These structures have interstitial sites between the icosahedral subunits that are partially occupied. The number of atoms in the unit cell varies depending on the occupancy of these interstitial sites. Here we have investigated the thermodynamic stability of boron allotropes for different numbers of atoms in the unit cell by calculating the free energies, including the contribution of phonons. It has been found that β-rhombohedral boron is most stable with 107 atoms/cell at low temperatures, while it becomes most stable with 105 atoms/cell above 1700 K. This suggests the occurrence of a phase transition at this temperature, which could account for the large variation in the number of atoms in the unit cell for β-rhombohedral boron samples. α-tetragonal boron is consistently most stable with 52 atom/cell and becomes unstable with more than 52 atoms/cell. Similar to β-rhombohedral boron, β-tetragonal boron may undergo a phase transition between 192 and 190 atoms/cell configurations. However, the thermodynamic stability of pure β-tetragonal boron has been questioned in comparison with other allotropes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multimodality in the Search for New Physics in Pulsar Timing Data and the Case of Kination-amplified Gravitational-wave Background from Inflation

We investigate the kination-amplified inflationary gravitational-wave background (GWB) interpretation of the signal recently reported by various pulsar timing array (PTA) experiments. Kination is a post-inflationary phase in the expansion history dominated by the kinetic energy of some scalar field, characterized by a stiff equation of state w = 1. Within the inflationary GWB model, we identify two modes that can fit the current data sets (NANOGrav and EPTA) with equal likelihood: the kination-amplification (KA) mode and the ordinary, no-kination-amplification (no-KA) mode. The multimodality of the likelihood motivates a Bayesian analysis with nested sampling. We analyze the free spectra of current PTA data and mock free spectra constructed with higher signal-to-noise ratios using nested sampling. The analysis of the mock spectrum designed to be consistent with the best fit to the NANOGrav 15 yr (NG15) data successfully reveals the expected bimodal posterior for the first time while excluding the reheating mode that appears in the fit to the current NG15 data, making a case for our correct and comprehensive treatment of potential multimodal posteriors arising from future PTA data sets. The resultant Bayes factor is $\mathcal{B}$ $\equiv$ Z no–KA /Z KA = 2.9 ± 1.9, indicating comparable statistical significance between the two modes. Given the theoretical model-building challenges of producing highly blue-tilted primordial tensor spectra, the KA mode has the advantage of requiring less blue primordial spectra, compared with the no-KA mode. The synergy between future cosmic microwave background polarization, pulsar timing, and laser interferometer measurements of gravitational waves will help resolve the ambiguity implied by the multimodal posterior in PTA-only searches.

Cosmology↗
DOE OSTI2026

Optimization of Processing, Microstructure, and Hardness of an Al–Ce–Ni–Mn–Zr Alloy With Laser Additive Manufacturing

Here, this study examines the processing behavior, microstructure, surface roughness, and hardness properties of an aluminum alloy containing 8.2 Ce, 4.5 Ni, 0.5 Mn, and 0.7 Zr (wt%) fabricated using laser powder bed fusion. Sixty samples were produced across a range of laser powers, scan speeds, and hatch spacings to evaluate their effect on porosity, hardness, and microstructural features. Porosity was measured using X-ray computed tomography, while microstructure and surface roughness were characterized by scanning electron (SEM) and laser confocal microscopy. High dense and cracking-free Al–Ni–Ce alloy was successfully manufactured. Porosity showed a U-shaped dependence on energy input, increasing under both insufficient and excessive melting conditions. Hardness increased with cooling rate due to finer cellular structures and solute redistribution. A general statistical model was developed to capture the relationships between processing parameters and material response. Results identify a narrow processing window defined by laser powers between 350 and 370 W, scan speeds from 1400 to 1800 mm/s, and hatch distances between 0.14 and 0.18 mm. Within this window, porosity is minimized (below 0.01%) and hardness is maximized (up to 160 HV), demonstrating that careful control of these parameters enables dense, high strength aluminum components suitable for demanding structural applications.

Aluminum alloys↗
DOE OSTI2022

Probing the Kinetic Origin of Varying Oxidative Stability of Ethyl- vs. Propyl-spaced Amines for Direct Air Capture

Amine-based adsorbents are promising for direct air capture of CO 2 , yet oxidative degradation remains a key unmitigated risk hindering wide-scale deployment. Borrowing wisdom from the basic auto-oxidation scheme, insights are gained into the underlying degradation mechanisms of polyamines by quantum chemical, advanced sampling simulations, adsorbent synthesis, and accelerated degradation experiments. The reaction kinetics of polyamines are contrasted with that of typical aliphatic polymers and they elucidate for the first time the critical role of aminoalkyl hydroperoxide decomposition in the oxidative degradation of amino-oligomers. The experimentally observed variation in oxidative stability of polyamines with different backbone structures is explained by the relationship between the local chemical structure and the free energy barrier of aminoalkyl hydroperoxide decomposition, suggesting that its energetics can be used as a descriptor to screen and design new polyamines with improved stability. In conclusion, the developed computational capability sheds light on radical-induced degradation chemistry of other organic functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

X-ray microscopy and talbot imaging with the matter in extreme conditions X-ray imager at LCLS

The last decade has shown the great potential that X-ray Free Electron Lasers (FEL) have to study High Energy Density (HED) physics. Experiments at FELs have made significant breakthroughs in Shock Physics and Dynamic Diffraction, Dense Plasma Physics and Warm Dense Matter Science, using techniques such as isochoric heating, inelastic scattering, small angle scattering and X-ray diffraction. In addition, and complementary to these techniques, the coherent properties of the FEL beam can be used to image HED samples with high fidelity. We present new imaging diagnostics and techniques developed at the Matter in Extreme Conditions (MEC) instrument at Linac Coherent Light Source (LCLS) over the last few years. We show results in Phase Contrast Imaging geometry, where the X-ray beam propagates from the target to a camera revealing its phase, as well as in Direct Imaging geometry, where a real image of the sample plane is produced in the camera with a spatial resolution down to 200 nm. Last, we show an implementation of the Talbot Imaging method allowing both X-ray phase and intensity measurements change introduced by a target with sub-micron resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Revealing Three-Dimensional Morphology in Nanoporous Gold Using Three-Dimensional X-Ray Fresnel Coherent Diffractive Imaging Tomography

Nanoporous metals fabricated by dealloying have a unique bi-continuous, sponge-like porous structure with ultra-high surface area. The unique properties of these materials, especially nanoporous gold, have numerous potential applications in sensors and actuators and in energy-related applications such as catalytic materials, super-capacitors, and battery supports. The degree of porosity and size of the metal ligaments are critical parameters that determine many properties and thus govern the functionalities of nanoporous metals in many applications including energy storage and conversion. Additionally, we used Fresnel coherent diffractive imaging combined with tomographic reconstruction to quantify the nanoscale three-dimensional spatial distribution and homogeneity of the porosity and ligament size within a bulk sample of nanoporous gold. The average porosity and its standard deviation along the axial direction through the sample were determined, as well as the characteristic feature size and its standard deviation. The result shows that free corrosion is an effective way to create homogeneous nanoporous metals with sample sizes on the order of 1 µm.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fast estimation of ion-pairing for screening electrolytes: A cluster can approximate a bulk liquid

The propensity for ion-pairing can often dictate the thermodynamic and kinetic properties of electrolyte solutions. Fast and accurate estimates of ion-pairing can thus be extremely valuable for supplementing design and screening efforts for novel electrolytes. We introduce an efficient cluster model to estimate the local ion-pair potential-of-mean-force between ionic solutes in electrolytes. The model incorporates an ion-pair and a few layers of explicit solvent in a gas-phase cluster and leverages an enhanced sampling approach to achieve high efficiency and accuracy. We employ harmonic restraints to prevent solvent escape from the cluster and restrict sampling of large inter-ion distances. We develop a cluster ion-pair sampling tool that implements our cluster model and demonstrate its potential utility for screening simple and poly-electrolyte systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Aligned FTICR-MS, Respiration, and Biochemical Transformation Data from Columbia River Sediment Incubations Associated with: “Carbon Limitation Leads to Thermodynamic Regulation of Aerobic Metabolism”

Columbia River hyporheic zone sediments from the Hanford Site 300 Area in eastern Washington were incubated in a full factorial design with different organic matter (OM) amendments. The aim of the experiment was to test the influence of OM thermodynamics on aerobic respiration across different organic carbon pools and concentrations. This dataset is comprised of (1) a csv with high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) analyzed through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory), (2) a csv with sample IDs, replicates, amendments, dissolved oxygen (DO) measurements, and sampling time points, (3) a csv with sample IDs, replicates, respiration rates, FTICR summary metrics, and relative abundance of chemical classes; and (4) a csv with the number of chemical transformations in each sample replicate (microcosm). The data are associated with the publication “Carbon Limitation Leads to Thermodynamic Regulation of Aerobic Metabolism” published in ES&T Letters (Garayburu-Caruso et al., 2020). Please use the data package’s DOI to cite the data package. We ask that you acknowledge the U.S. Department of Energy (DOE) Biological and Environmental Research (BER) Subsurface Biogeochemical Research (SBR) program when using the data. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include data package authors as co-authors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Suppression of the vacuum space-charge effect in fs-photoemission by a retarding electrostatic front lens

The performance of time-resolved photoemission experiments at fs-pulsed photon sources is ultimately limited by the e–e Coulomb interaction, downgrading energy and momentum resolution. Here, we present an approach to effectively suppress space-charge artifacts in momentum microscopes and photoemission microscopes. A retarding electrostatic field generated by a special objective lens repels slow electrons, retaining the k-image of the fast photoelectrons. The suppression of space-charge effects scales with the ratio of the photoelectron velocities of fast and slow electrons. Fields in the range from -20 to 01100 V/mm for E kin = 100 eV to 4 keV direct secondaries and pump-induced slow electrons back to the sample surface. Ray tracing simulations reveal that this happens within the first 40 to 3 μm above the sample surface for E kin = 100 eV to 4 keV. An optimized front-lens design allows switching between the conventional accelerating and the new retarding mode. Time-resolved experiments at E kin = 107 eV using fs extreme ultraviolet probe pulses from the free-electron laser FLASH reveal that the width of the Fermi edge increases by just 30 meV at an incident pump fluence of 22 mJ/cm2 (retarding field -21 V/mm). For an accelerating field of +2 kV/mm and a pump fluence of only 5 mJ/cm 2 , it increases by 0.5 eV (pump wavelength 1030 nm). At the given conditions, the suppression mode permits increasing the slow-electron yield by three to four orders of magnitude. The feasibility of the method at high energies is demonstrated without a pump beam at E kin = 3830 eV using hard x rays from the storage ring PETRA III. The approach opens up a previously inaccessible regime of pump fluences for photoemission experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Photon-shot-noise-limited transient absorption soft X-ray spectroscopy at the European XFEL

Femtosecond transient soft X-ray absorption spectroscopy (XAS) is a very promising technique that can be employed at X-ray free-electron lasers (FELs) to investigate out-of-equilibrium dynamics for material and energy research. Here, a dedicated setup for soft X-rays available at the Spectroscopy and Coherent Scattering (SCS) instrument at the European X-ray Free-Electron Laser (European XFEL) is presented. It consists of a beam-splitting off-axis zone plate (BOZ) used in transmission to create three copies of the incoming beam, which are used to measure the transmitted intensity through the excited and unexcited sample, as well as to monitor the incoming intensity. Since these three intensity signals are detected shot by shot and simultaneously, this setup allows normalized shot-by-shot analysis of the transmission. For photon detection, an imaging detector capable of recording up to 800 images at 4.5 MHz frame rate during the FEL burst is employed, and allows a photon-shot-noise-limited sensitivity to be approached. The setup and its capabilities are reviewed as well as the online and offline analysis tools provided to users.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Simultaneous Two- and Three-Photon Deep Imaging of Autofluorescence in Bacterial Communities

The intrinsic fluorescence of bacterial samples has a proven potential for label-free bacterial characterization, monitoring bacterial metabolic functions, and as a mechanism for tracking the transport of relevant components through vesicles. The reduced scattering and axial confinement of the excitation offered by multiphoton imaging can be used to overcome some of the limitations of single-photon excitation (e.g., scattering and out-of-plane photobleaching) to the imaging of bacterial communities. In this work, we demonstrate in vivo multi-photon microscopy imaging of Streptomyces bacterial communities, based on the excitation of blue endogenous fluorophores, using an ultrafast Yb-fiber laser amplifier. Its parameters, such as the pulse energy, duration, wavelength, and repetition rate, enable in vivo multicolor imaging with a single source through the simultaneous two- and three-photon excitation of different fluorophores. Three-photon excitation at 1040 nm allows fluorophores with blue and green emission spectra to be addressed (and their corresponding ultraviolet and blue single-photon excitation wavelengths, respectively), and two-photon excitation at the same wavelength allows fluorophores with yellow, orange, or red emission spectra to be addressed (and their corresponding green, yellow, and orange single-photon excitation wavelengths). We demonstrate that three-photon excitation allows imaging over a depth range of more than 6 effective attenuation lengths to take place, corresponding to an 800 micrometer depth of imaging, in samples with a high density of fluorescent structures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Custom-trained Machine-learning Interatomic Potentials: ZnCl2 Aqueous Solution

This dataset was generated using an iterative active-learning strategy implemented in the ArcaNN software package (https://github.com/arcann-chem/arcann_training) to train machine-learning interatomic potentials for aqueous ZnCl2 solutions. Each active-learning cycle consisted of three stages: training, exploration, and labeling. The initial training set combined configurations generated in this work from enhanced-sampling ab initio molecular dynamics simulations with configurations from a previously reported neural-network-potential study of aqueous ZnCl2. The enhanced-sampling ab initio molecular dynamics simulations involved Zn–Cl separation and the chloride coordination number around Zn²? as collective variables. These configurations served as the seed dataset. Subsequent active-learning cycles expanded the training set by identifying and labeling configurations that were poorly represented by the current models, thereby improving coverage of ion-association states and changes in local coordination and charge-state environments relevant to the solution free-energy landscape. For all selected configurations, single-point calculations of the total energies and atomic forces were performed within density functional theory using the CP2K Quickstep module. Reference calculations employed the revPBE-D3 and r2SCAN exchange-correlation functionals. Motivated by recent work on aqueous Zn²?, the main revPBE calculations omitted D3 dispersion contributions involving Zn²?, while retaining the D3 correction for water and chloride. For comparison, fully dispersion-corrected revPBE-D3 reference calculations were also performed, with D3 applied to all species, including Zn²?. Valence electrons were treated explicitly, while core electrons were represented using norm-conserving Goedecker–Teter–Hutter pseudopotentials. The wave functions were expanded using the mixed Gaussian-and-plane-wave scheme with TZV2P-MOLOPT basis sets for all elements and a 600 Ry auxiliary plane-wave cutoff for the electron density. Self-consistent-field convergence was accelerated using the orbital-transformation and Direct Inversion in the Iterative Subspace algorithms, with a convergence threshold of 10?6. All single-point calculations were performed in periodic orthorhombic cells. The CELL_REF keyword in CP2K was used to define a fixed reference cell with a box length of 25 Å. This treatment ensured a consistent reference for configurations extracted from NpT trajectories with fluctuating cell dimensions. The resulting DFT energies and atomic forces constitute the ground-truth labels used to train the MLIPs. The resulting MLIP was trained for aqueous ZnCl2 solutions spanning concentrations from 0 to 30 molal and a broad pH range, from strongly acidic to strongly basic conditions. Representative examples of configurations included in the MLIP training dataset are provided below. These include 1) Representative configurations from the dataset labeled at the revPBE-D3 level, with D3 dispersion interactions involving Zn2+ excluded (revPBE-wo-D3). 2) Representative configurations from the dataset labeled at the fully dispersion-corrected revPBE-D3 level, with D3 interactions applied to all species, including Zn2+ (revPBE-D3). 3) Representative configurations from the dataset labeled at the r2SCAN level of theory (r2SCAN).

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗
DOE OSTI2024

Simulating Crystallization in a Colloidal System Using State Predictive Information Bottleneck Based Enhanced Sampling

Here, we investigate crystal nucleation in supersaturated colloid suspensions using enhanced molecular dynamics simulations augmented with machine learning techniques. The simulations reveal that crystallization in the model colloidal system studied here, with particles interacting through a repulsive screened Coulomb Yukawa potential, proceeds from vapor to dense liquid droplet to crystalline phases across multiple high barriers. Employing a one-dimensional reaction coordinate derived from the State Predictive Information Bottleneck framework, our simulations capture back-and-forth phase transitions across multiple barriers effectively in biased metadynamics simulations. We obtain relative free energy differences between different phases and also quantify the roles of different molecular level features in driving the phase changes.

Chemistry↗
DOE OSTI2022

Atomic-Scale STEM Analysis Shows Structural Changes of Au–Pd Nanoparticles in Various Gaseous Environments

We report dynamical restructuring effects in free-standing Au 0.75 Pd 0.25 nanoparticles occurring in gaseous environments at elevated temperatures. The freshly prepared sample was found to have a core–shell structure with a Pd-rich phase on the surface. The evolution of sample composition and morphology under exposure to 1 bar of pure gases, namely O 2 , H 2 , air, CO, and CO 2 , at different temperatures was studied using in situ scanning transmission electron microscopy (STEM) and energy-dispersive X-ray spectroscopy (EDS). We observed sharper facets on the surface of the particles under O 2 or air at 400 °C. Small islands of Pd were present on the surface, although some Pd was redistributed inside the bulk when the temperature was increased under O 2 . Subtle changes in surface roughness were noted when O 2 was substituted with H 2 at 400 °C, an observation correlated to density functional theory (DFT) calculations. The particles lost clean surface facets when CO was introduced at room temperature and at 200 °C. No substantial changes could be observed after exposure to CO 2 at 250 °C. The adsorption of CO molecules on the surface modifies the surface of the particles and decreases the facet prevalence. Furthermore, these in situ observations show how gases can induce subtle modification of the surface of nanocatalysts, potentially impacting their chemical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A matrix completion algorithm for efficient calculation of quantum and variational effects in chemical reactions

This work examines the viability of matrix completion methods as cost-effective alternatives to full nuclear Hessians for calculating quantum and variational effects in chemical reactions. The harmonic variety-based matrix completion (HVMC) algorithm, developed in a previous study (https://doi.org/10.1063/5.0018326), exploits the low-rank character of the polynomial expansion of potential energy to recover, using a small sample, vibrational frequencies (square roots of nuclear Hessian eigenvalues) constituting the reaction path. Furthermore, these frequencies are essential for calculating rate coefficients using variational transition state theory with multidimensional tunneling (VTST-MT). HVMC performance is examined for four SN2 reactions and five hydrogen transfer reactions, with each H-transfer reaction consisting of at least one vibrational mode strongly coupled to the reaction coordinate. HVMC is robust and captures zero-point energies, vibrational free energies, zero-curvature tunneling, and adiabatic ground state and free energy barriers as well as their positions on the reaction coordinate. For medium to large reactions involving H-transfer, with the exception of the most complex Ir catalysis system, less than 35% of total eigenvalue information is necessary for accurate recovery of key VTST-MT observables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Two-Dimensional Siloxene Nanosheets: Impact of Morphology and Purity on Electrochemistry

Two-dimensional (2D) siloxene (Si 6 O 3 H 6 ) has shown promise as a negative electrode material for Li-ion batteries due to its high gravimetric capacity and superior mechanical properties under (de)lithiation compared to bulk Si. Here, in this work, we prepare purified siloxene nanosheets through the removal of bulk Si contaminants, use ultrasonication to control the lateral size and thickness of the nanosheets, and probe the effects of the resulting morphology and purity on the electrochemistry. The thin siloxene nanosheets formed after 4 h of ultrasonication deliver an average capacity of 810 mA h/g under a 1000 mA/g rate over 200 cycles with a capacity retention of 76%. Interestingly, the purified siloxene shows lower initial capacity but superior capacity retention over extended cycling. The 2D morphology benefit is illustrated where the parent siloxene nanosheet morphology and structure were largely maintained based on operando optoelectrochemistry, in situ Raman, ex situ scanning electron microscopy, and ex situ transmission electron microscopy. Furthermore, the purified siloxene-based electrode free from crystalline Si impurity experiences the least expansion upon (de)lithiation as visualized by cross-section electron microscopy of samples recovered post-cycling.

25 ENERGY STORAGE↗
DOE OSTI2022

Preservation of high-pressure volatiles in nanostructured diamond capsules

High pressure induces dramatic changes and novel phenomena in condensed volatiles(1,2) that are usually not preserved after recovery from pressure vessels. In this study we report a process that pressurizes volatiles into nanopores of type 1 glassy carbon precursors, converts glassy carbon into nanocrystalline diamond by heating and synthesizes free-standing nanostructured diamond capsules (NDCs) capable of permanently preserving volatiles at high pressures, even after release back to ambient conditions for various vacuum-based diagnostic probes including electron microscopy. As a demonstration, we perform a comprehensive study of a high-pressure argon sample preserved in NDCs. Synchrotron X-ray diffraction and high-resolution transmission electron microscopy show nanometre-sized argon crystals at around 22.0 gigapascals embedded in nanocrystalline diamond, energy-dispersive X-ray spectroscopy provides quantitative compositional analysis and electron energy-loss spectroscopy details the chemical bonding nature of high-pressure argon. The preserved pressure of the argon sample inside NDCs can be tuned by controlling NDC synthesis pressure. To test the general applicability of the NDC process, we show that high-pressure neon can also be trapped in NDCs and that type 2 glassy carbon can be used as the precursor container material. Additional experiments on other volatiles and carbon allotropes open the possibility of bringing high-pressure explorations on a par with mainstream condensed-matter investigations and applications.

36 MATERIALS SCIENCE↗