Search NASA⌕ Search

SEARCH · Search NASA

Results for “function approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tuned and screened range-separated hybrid density functional theory for describing electronic and optical properties of defective gallium nitride

We apply a hybrid density functional theory approach, based on a tuned and screened range-separated hybrid (SRSH) exchange-correlation functional, to describe the optoelectronic properties of defective gallium nitride (GaN). SRSH and time-dependent SRSH (TDSRSH) are tuned to produce accurate energetics for the pristine material and applied to the study of a series of point defects in bulk GaN, a blue light-emitting material that degrades in the presence of defects. We first establish the accuracy of the method by comparing the predicted quasiparticle gap and low-energy excitation spectra of (TD)SRSH and many-body perturbation theory for both pristine GaN and GaN containing a single nitrogen vacancy. Aided by the reduced computational cost of (TD)SRSH, we then report on three additional technologically relevant point defects and defect complexes in GaN: the gallium vacancy, the carbon interstitial, and the carbon-silicon complex. We compute the low-energy optical absorption spectra for these defects and show the presence of defect-centered transitions. Furthermore, by estimating the Stokes shift, we predict, in agreement with previous studies, that the carbon substitutional defect is a candidate for the detrimental yellow luminescence in GaN. Furthermore, this study indicates that TDSRSH is a promising and computationally feasible approach for quantitatively accurate, first-principles modeling of defective semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Asymptotic Behavior of Memristive Circuits

The interest in memristors has risen due to their possible application both as memory units and as computational devices in combination with CMOS. This is in part due to their nonlinear dynamics, and a strong dependence on the circuit topology. We provide evidence that also purely memristive circuits can be employed for computational purposes. In the present paper we show that a polynomial Lyapunov function in the memory parameters exists for the case of DC controlled memristors. Such a Lyapunov function can be asymptotically approximated with binary variables, and mapped to quadratic combinatorial optimization problems. This also shows a direct parallel between memristive circuits and the Hopfield-Little model. In the case of Erdos-Renyi random circuits, we show numerically that the distribution of the matrix elements of the projectors can be roughly approximated with a Gaussian distribution, and that it scales with the inverse square root of the number of elements. This provides an approximated but direct connection with the physics of disordered system and, in particular, of mean field spin glasses. Using this and the fact that the interaction is controlled by a projector operator on the loop space of the circuit. We estimate the number of stationary points of the approximate Lyapunov function and provide a scaling formula as an upper bound in terms of the circuit topology only.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

The journey from forensic to predictive materials science using density functional theory

Approximate methods for electronic structure, implemented in sophisticated computer codes and married to ever-more powerful computing platforms, have become invaluable in chemistry and materials science. The maturing and consolidation of quantum chemistry codes since the 1980s, based upon explicitly correlated electronic wave functions, has made them a staple of modern molecular chemistry. Here, the impact of first principles electronic structure in physics and materials science had lagged owing to the extra formal and computational demands of bulk calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Stretched or noded orbital densities and self-interaction correction in density functional theory

Semilocal approximations to the density functional for the exchange-correlation energy of a many-electron system necessarily fail for lobed one-electron densities, including not only the familiar stretched densities but also the less familiar but closely related noded ones. The Perdew-Zunger (PZ) self-interaction correction (SIC) to a semilocal approximation makes that approximation exact for all one-electron ground- or excited-state densities and accurate for stretched bonds. When the minimization of the PZ total energy is made over real localized orbitals, the orbital densities can be noded, leading to energy errors in many-electron systems. Minimization over complex localized orbitals yields nodeless orbital densities, which reduce but typically do not eliminate the SIC errors of atomization energies. Other errors of PZ SIC remain, attributable to the loss of the exact constraints and appropriate norms that the semilocal approximations satisfy, suggesting the need for a generalized SIC. These conclusions are supported by calculations for one-electron densities and for many-electron molecules. While PZ SIC raises and improves the energy barriers of standard generalized gradient approximations (GGAs) and meta-GGAs, it reduces and often worsens the atomization energies of molecules. Thus, PZ SIC raises the energy more as the nodality of the valence localized orbitals increases from atoms to molecules to transition states. PZ SIC is applied here, in particular, to the strongly constrained and appropriately normed (SCAN) meta-GGA, for which the correlation part is already self-interaction-free. This property makes SCAN a natural first candidate for a generalized SIC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reduced-Order Models of Static Power Grids based on Spectral Clustering

For large-scale interconnected power systems that cover large geographical areas, certain electrical studies are required so that appropriate decisions ensure system reliability and low cost. For such studies, it is often neither practical nor necessary to model in detail the entire power system, which is increasingly complex due to a more diverse range of grid assets to choose from in both short and long-term planning. The goal of this paper is to present a methodology to reduce the order of large-scale power networks based on spectral graph theory given that current methods for static network reduction are not scalable. A brief analysis of some spectral clustering properties to determine which graph Laplacian matrix should be used and why is included. The analysis shows that the utilization of the normalized graph Laplacian is more advantageous for clustering purposes. Techniques are proposed to approximate cost functions for the aggregated generators. This is done via linear regression. The reduced-order model obtained with the proposed methodology has an accuracy above 94% and solves the scalability issue commonly present in other reduction methods. If the utilization of the reduced-order model is either constrained to load levels above mid-peak demand, or cost functions of aggregated units are approximated via a piecewise quadratic approach, then the error distribution is in the order of 10^-3. .

Baquedano-Aguilar, Mario D.↗
DOE OSTI2018

Band and Impurity States in Dimond with the (MV){sup –} (M = Si, Ge, Sn) Centers Based on ab Initio Calculations

Ab initio calculations were used to determine the structure, electronic zone dispersion, partial (atomic and orbital) densities of states, and levels of impurity–vacancy cluster (MV){sup –} (M = Si, Ge, Sn) in diamond. Wavefunctions were determined in the density functional theory approximation using hybrid exchange-correlation functional, localized basis set of Gaussians, and a supercell consisting of 192 atoms. Results are compared with data on undoped diamond and with experimental results. The dependence of the direct and indirect energy gap on the cluster type is discussed. Calculations are carried out taking into account the spin–orbit interaction to identify impurity levels in the valence band. The effect of electron–electron interaction on the position of impurity levels is discussed. The dominant contribution of the d orbitals to the density of states at the impurity level in all clusters is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Performance improvements of the windowed multipole formalism using a rational fraction approximation of the Faddeeva function

The windowed multipole (WMP) formalism was introduced as a way to calculate Doppler broadened cross sections on the fly during Monte Carlo simulations. While more arithmetic is needed compared to point-wise cross section look-ups, performance remained competitive from the large memory reductions and sequential data access. The single most expensive function call in a depleted fuel assembly problem using WMP comes from the evaluation of the Faddeeva function, which previously relied on a highly accurate, highly-branching algorithm. This paper explores the use of rational fraction approximations tailored to the domain interest of reactor physics applications and the development of lower accuracy approximations sufficient for our application. The rational approximations were implemented and tested in OpenMC on an infinite medium problem to stress the cross section calculation routine and a PWR assembly problem. In both cases, the rational approximation nearly eliminated the ∼ 20% penalty previously observed when comparing to point-wise libraries. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Adaptive Sparse Grid Construction in a Context of Local Anisotropy and Multiple Hierarchical Parents

We consider general strategy for hierarchical multidimensional interpolation based on sparse grids, where the interpolation nodes and locally supported basis functions are constructed from tensors of a one dimensional hierarchical rule. We consider four different hierarchies that are tailored towards general functions, high or low order polynomial approximation, or functions that satisfy homogeneous boundary conditions. The main advantage of the locally supported basis is the ability to choose a set of functions based on the observed behavior of the target function. We present an alternative to the classical surplus refinement techniques, where we exploit local anisotropy and refine using functions with not strictly decreasing support. The more flexible refinement strategy improves stability and reduces the total number of expensive simulations, resulting in significant computational saving. We demonstrate the advantages of the different hierarchies and refinement techniques by application to series of simple functions as well as a system of ordinary differential equations given by the Kermack-McKendrick SIR model.

Stoyanov, Miroslav K.↗
DOE OSTI2022

A fast approximation to supershell partition functions

A formula for supershell partition functions, which play a major role in the Super Transition Array approach to radiative-opacity calculations, is derived as a functional of the distribution of energies within the supershell. It consists in an alternative expansion for an arbitrary number of electrons or holes which also allows for quick approximate evaluations with truncated number of terms in the expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Simple hydrogenic estimates for the exchange and correlation energies of atoms and atomic ions, with implications for density functional theory

Exact density functionals for the exchange and correlation energies are approximated in practical calculations for the ground-state electronic structure of a many-electron system. An important exact constraint for the construction of approximations is to recover the correct non-relativistic large-Z expansions for the corresponding energies of neutral atoms with atomic number Z and electron number N = Z, which are correct to leading order (–0.221 Z 5/3 and –0.021 Z ln Z respectively) even in the lowest-rung or local density approximation. We find that hydrogenic densities lead to E x (N,Z) ≈ –0.354 N 2/3 Z (as known before only for Z >> N >> 1) and E c ≈ –0.02 N ln N . These asymptotic estimates are most correct for atomic ions with large N and Z >> N, but we find that they are qualitatively and semi- quantitatively correct even for small N and for N ≈ Z. The large-N asymptotic behavior of the energy is pre-figured in small-N atoms and atomic ions, supporting the argument that widely-predictive approximate density functionals should be designed to recover the correct asymptotics. Here, it is shown that the exact Kohn-Sham correlation energy, when calculated from the pure ground-state wavefunction, should have no contribution proportional to Z in the Z → ∞ limit for any fixed N.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Assessing the Role of Interfacial and Metal Sites in Pt/TiO2-Catalyzed Acetic Acid Hydrodeoxygenation

Thermochemical conversion of biomass to produce drop-in quality biofuels typically involves hydrodeoxygenation (HDO) steps following catalytic fast pyrolysis (CFP) to remove excess oxygen and create a more-stable bio-oil product. HDO reactions are performed by co-feeding the CFP vapor-phase product and H2 gas over a bi-functional catalyst. Noble-metal catalysts supported on reducible metal oxides (e.g., Pt/TiO2) are active and selective toward these HDO reactions. Griffin and co-workers showed that Pt/TiO2 catalysts promote the desired deoxygenation steps for m-cresol HDO while mitigating undesired C-C bond-breaking steps that reduce the overall value/energy density of the biofuel. Such model-compound studies to inform the design of improved catalysts for HDO chemistry are necessary to improve the overall process economics/efficiencies for biofuels production. One important class of bio-derived compounds that has not been studied extensively with respect to HDO chemistry, particularly at the atomic level, is carboxylic acids. Past experimental work indicates that Pt/C and Pt/TiO2 catalysts are selective toward C-C and C-O bond-dissociation products for acetic acid HDO, respectively. To understand the role of Pt/TiO2 active sites in this observed change in selectivity and guide catalyst development, the work in this presentation focuses on modeling the role of Pt-metal and Pt-TiO2-interfacial sites in promoting key C-C bond-breaking, C-O bond-breaking, and (de)hydrogenation steps in acetic acid HDO. Density functional theory (DFT) calculations were performed using the Vienna Ab initio Simulation Package (VASP). The exchange-correlation functional was approximated by the Perdew-Burke-Ernzerhof functional. Dispersion interactions were captured using the D3 method. Projector augmented-wave potentials described electron-ion interactions, and electron wavefunctions were expanded via a planewave basis with an energy cutoff of 500 eV. Activation barriers were calculated using the climbing image nudged elastic band method. Results and Discussion: To discern the role of Pt-metal and Pt-TiO2 interface sites in promoting acetic acid HDO chemistry, Pt(111) slab and anatase TiO2(101)-supported Pt-nanowire (PtNW/OH-TiO2) surface models were constructed, respectively. Because H2 is co-fed in HDO reactions, the anatase support was terminated with OH groups. Interfacial vacancies have been shown to facilitate Ru/TiO2-catalyzed phenol HDO; thus, an interfacial model with an OH vacancy was also considered (PtNW/OHv-TiO2). Pt-TiO2-interface sites stabilize adsorption of all studied acetic acid HDO surface intermediates relative to terrace Pt-metal sites, particularly when an interfacial-OH vacancy is present. Oxygenated species prefer to bind at the OH vacancy through the O atom, suggesting a preference for C-O over C-C bond cleavage at these sites. This hypothesis is supported by net-negative and net-positive average shifts in the reaction energy and activation energy barriers for C-O and C-C bond-breaking steps, respectively, at Pt-TiO2-interface sites relative to Pt-metal sites. Using the calculated energetics, the predicted minimum-energy pathway was determined for each surface. Pt(111) is predicted to follow decarboxylation, producing undesired methane and carbon dioxide. Conversely, PtNW/OH-TiO2 and PtNW/OHv-TiO2 are both predicted to produce desired acetaldehyde and ethane. The interfacial vacancy may also play a key role in facilitating the first C-O bond-breaking step in acetic acid HDO, lowering the barrier by 0.6 eV relative to the defect-free interface model. These results demonstrate the critical role of the Pt-TiO2 interface in the shift in acetic acid HDO selectivity experimentally observed on Pt/C and Pt/TiO2 catalysts. The results herein demonstrate the important role of the Pt-TiO2 interface and interfacial oxygen vacancies in improving the carbon efficiency for HDO reactions in CFP upgrading.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2019

An analytic expression approximating the Debye heat capacity function

It is important to have analytic expressions for critical functions in the equations of state of materials. The Debye model has been very successful in approximating the thermal energy properties of a variety of solids, but is nonanalytic. Existing approximations suffer from various shortcomings, the most common being lack of applicability over some temperature range. A new analytic and integrable functional form that closely approximates the Debye model for the heat capacity is presented. This form, based on the mean of two Einstein heat capacity functions with a low temperature correction, exhibits deviations from the Debye model smaller than typical experimental scatter in heat capacity data.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Generalized Optimized Effective Potential for Orbital Functionals and Self-Consistent Calculation of Random Phase Approximations

A new self-consistent procedure for calculating the total energy with an orbital-dependent density functional approximation (DFA), the generalized optimized effective potential (GOEP), is developed in the present work. The GOEP is a nonlocal Hermitian potential that delivers the sets of occupied and virtual orbitals and minimizes the total energy. The GOEP optimization leads to the same minimum as does the orbital optimization. The GOEP method is promising as an effective optimization approach for orbital-dependent functionals, as demonstrated for the self-consistent calculations of the random phase approximation (RPA) to the correlation functionals in the particle–hole (ph) and particle–particle (pp) channels. The results show that the accuracy in describing the weakly interacting van der Waals systems is significantly improved in the self-consistent calculations. In particular, the important single excitations contribution in non-self-consistent RPA calculations can be captured self-consistently through the GOEP optimization, leading to orbital renormalization, without using the single excitations in the energy functional.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Excitation Energies from the Single-Particle Green’s Function with the GW Approximation

Quasi-particle energies are vital to predicting molecular ionization energies and bulk band structures. The state-of-the-art method for quasi-particle energy calculations, particularly for bulk systems, is the GW approximation. For excited state calculations, one needs to go beyond the GW approximation. The Bethe–Salpeter equation (BSE) is the commonly used approach for bulk-system excited state calculations beyond the GW approximation, which is accurate but computationally cumbersome. In this Article, we create a new method to extract excitation energies directly from the quasi-particle energies based on the GW approximation. Starting from the (N – 1)-electron system, we are able to calculate molecular excitation energies with orbital energies at the GW level for HOMO excitations. Our calculations demonstrate that this method can accurately capture low-lying local excitations as well as charge transfer excitations in many molecular systems. This approach is shown to outperform the time-dependent density functional theory (TDDFT) and are comparable with higher level excited state calculations, including the equation-of-motion couple cluster (EOM-CC) theory and the BSE, but with less computational effort. This new approach provides an efficient alternative to the BSE method for accurate excited state calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Universal approximation of symmetric and anti-symmetric functions

In this work, we consider universal approximations of symmetric and anti-symmetric functions, which are important for applications in quantum physics, as well as other scientific and engineering computations. We give constructive approximations with explicit bounds on the number of parameters with respect to the dimension and the target accuracy ϵ. While the approximation still suffers from the curse of dimensionality, to the best of our knowledge, these are the first results in the literature with explicit error bounds for functions with symmetry or anti-symmetry constraints

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Computing partition functions in the one-clean-qubit model

We present a method to approximate partition functions of quantum systems using mixed-state quantum computation. For positive-semidefinite Hamiltonians, our method has an expected running-time that is almost linear in [M/( ε rel Z )] 2 , where M is the dimension of the quantum system, Z is the partition function, and ε rel is the relative precision. It is based on approximations of the exponential operator as linear combinations of certain operators related to block-encoding of Hamiltonians or Hamiltonian evolutions. The trace of each operator is estimated using a standard algorithm in the one-clean-qubit model. For large values of Z , our method may run faster than exact classical methods, whose complexities are polynomial in M . We also prove that a version of the partition function estimation problem within additive error is complete for the so-called DQC1 complexity class, suggesting that our method provides a superpolynomial speedup for certain parameter values. Overall, to attain a desired relative precision, we develop a classical procedure based on a sequence of approximations within predetermined additive errors that may be of independent interest.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Approximating Density Probability Distribution Functions Across Cosmologies

Using a suite of self-similar cosmological simulations, we measure the probability distribution functions (PDFs) of real-space density, redshift-space density, and their geometric mean. We find that the real-space density PDF is well-described by a function of two parameters: ns, the spectral slope, and σL, the linear rms density fluctuation. For redshift-space density and the geometric mean of real- and redshift-space densities, we introduce a third parameter, ${s}_{L}=\sqrt{\langle {\left({{dv}}_{\mathrm{pec}}^{L}/{dr}\right)}^{2}\rangle }/H$. We find that density PDFs for the LCDM cosmology is also well-parameterized by these three parameters. As a result, we are able to use a suite of self-similar cosmological simulations to approximate density PDFs for a range of cosmologies. We make the density PDFs publicly available and provide an analytical fitting formula for them.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Non-adiabatic approximations in time-dependent density functional theory: progress and prospects

Time-dependent density functional theory continues to draw a large number of users in a wide range of fields exploring myriad applications involving electronic spectra and dynamics. Although in principle exact, the predictivity of the calculations is limited by the available approximations for the exchange-correlation functional. In particular, it is known that the exact exchange-correlation functional has memory-dependence, but in practise adiabatic approximations are used which ignore this. Here we review the development of non-adiabatic functional approximations, their impact on calculations, and challenges in developing practical and accurate memory-dependent functionals for general purposes.

36 MATERIALS SCIENCE↗