Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A density functional theory and neutron diffraction study of the ambient condition properties of sub-stoichiometric yttrium hydride

Several mechanical and thermophysical properties are required as a function of non-stoichiometry for the successful implementation of YH 2-x for nuclear reactor moderator applications. Density functional theory calculations, in combination with neutron diffraction experiments, were used to study the structural and mechanical properties of YH 2-x . Point defect analysis indicated H occupation primarily at the tetrahedral site within an fcc Y sub-lattice, confirming a fluorite YH 2 structure. The small positive formation energy for H vacancies under Y-rich conditions predicted that hypo-stoichiometry is accommodated by Y+YH 2 at ambient conditions and by H vacancies in the YH 2-x single phase that is relevant to high temperatures. Neutron diffraction studies were used to confirm both the occupation of H on tetrahedral sites and the near-stoichiometric composition of the hydride phase in the two-phase Y+YH 2 region of the phase diagram that dominates at room temperature. Energy minimized special-quasirandom-structures of H vacancies were used to calculate lattice parameters, elastic constants, and several other properties as a function of composition for the single phase YH 2-x . The lattice parameter of YH 2-x decreased by only 0.004 Å with increasing H/Y for the range 1.31 ≤ H / Y ≤ 2.0 indicating a negligible effect on lattice parameters due to vacancy formation. In the two-phase region, however, calculations predicted the density of z Y + ( 1 - z ) Y H 2 - x to increase with decreasing H/Y at lower temperatures due to the increased fraction of high-density Y metal. Additionally, for the high temperature single phase, decreasing H/Y reduced the density as a consequence of the lattice expansion associated with vacancy formation. All elastic constants and moduli increased with increasing hydrogen content in single-phase YH 2-x .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stochastic density functional theory combined with Langevin dynamics for warm dense matter

Here, this study overviews and extends a recently developed stochastic finite-temperature Kohn-Sham density functional theory to study warm dense matter using Langevin dynamics, specifically under periodic boundary conditions. The method's algorithmic complexity exhibits nearly linear scaling with system size and is inversely proportional to the temperature. Additionally, a linear-scaling stochastic approach is introduced to assess the Kubo-Greenwood conductivity, demonstrating exceptional stability for dc conductivity. Utilizing the developed tools, we investigate the equation of state, radial distribution, and electronic conductivity of hydrogen at a temperature of 30 000 K. As for the radial distribution functions, we reveal a transition of hydrogen from gaslike to liquidlike behavior as its density exceeds 4 g/cm 3 . As for the electronic conductivity as a function of the density, we identified a remarkable isosbestic point at frequencies around 7 eV, which may be an additional signature of a gas-liquid transition in hydrogen at 30 000 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Forces from Stochastic Density Functional Theory under Nonorthogonal Atom-Centered Basis Sets

We develop a formalism for calculating forces on the nuclei within the linear-scaling stochastic density functional theory (sDFT) in a nonorthogonal atom-centered basis set representation (Fabian et al. Wiley Interdiscip. Rev.: Comput. Mol. Sci. 2019, 9, e1412, 10.1002/wcms.1412) and apply it to the Tryptophan Zipper 2 (Trp-zip2) peptide solvated in water. We use an embedded-fragment approach to reduce the statistical errors (fluctuation and systematic bias), where the entire peptide is the main fragment and the remaining 425 water molecules are grouped into small fragments. We analyze the magnitude of the statistical errors in the forces and find that the systematic bias is of the order of 0.065 eV/Å (~1.2 × 10 -3 E h / a 0 ) when 120 stochastic orbitals are used, independently of system size. This magnitude of bias is sufficiently small to ensure that the bond lengths estimated by stochastic DFT (within a Langevin molecular dynamics simulation) will deviate by less than 1% from those predicted by a deterministic calculation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ab initio Molecular Dynamics Beyond Density Functional Theory

The funding from this award supported the development of new theoretical methods that both increase the accuracy of quantum simulations beyond that of density functional theory, as well as reduce the cost of such simulations, for example, through machine learning and algorithmic improvements. The improvements lead to, in some cases, orders of magnitude increases in simulation speed as well as orders of magnitude increase in accuracy, compared to before this work was started. This translates to both greater certainty in making predictions about chemical phenomena that are currently studied computationally, as well as laying the ground-work for the study of new areas of chemistry that have not traditionally been simulated, because of the new time-scales and accuracies that can be reached.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Analysis and visualization of energy densities. I. Insights from real-time time-dependent density functional theory simulations

In this article, we report a scheme to analyze and visualize the energy density fluctuations during the real-time time-dependent density functional theory (RT-TDDFT) simulations. Using Ag 4 –N 2 complexes as examples, here we show that the grid-based Kohn–Sham energy density can be computed at each time step using a procedure from Nakai and coworkers. Then the instantaneous energy of each molecular fragment (such as Ag 4 and N 2 ) can be obtained by partitioning the Kohn–Sham energy densities using Becke or fragment-based Hirshfeld (FBH) scheme. A strong orientation-dependence is observed for the energy flow between the Ag 4 cluster and a nearby N 2 molecule in the RT-TDDFT simulations. Future applications of such an energy density analysis in electron dynamics simulations are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

An Algorithm for Atom-Centered Lossy Compression of the Atomic Orbital Basis in Density Functional Theory Calculations

Large atomic-orbital (AO) basis sets of at least triple and preferably quadruple-ζ (QZ) size are required to adequately converge Kohn–Sham density functional theory (DFT) calculations toward the complete basis set limit. However, incrementing the cardinal number by one nearly doubles the AO basis dimension, and the computational cost scales as the cube of the AO dimension, so this is very computationally demanding. Here, in this work, we develop and test a threshold-based natural atomic orbital (NAO) scheme in which ϵ-NAOs are obtained as eigenfunctions of atomic blocks of the density matrix in a one-center orthogonalized representation. This enables compression of the AO basis that is optimal for a given threshold, 10 –ϵ , by discarding NAOs with occupation numbers below that threshold. Extensive pilot test calculations using the Hartree–Fock functional and taking the converged density matrix as input suggest that a threshold of 10 –5 can yield a compression factor (ratio of AO to compressed ϵ-NAO dimension) between 2.5 and 4.5 for the QZ pc-3 basis. The errors in relative energies are typically less than 0.1 kcal/mol when the compressed basis is used instead of the uncompressed basis. Between 10 and 100 times smaller errors (i.e., usually less than 0.01 kcal/mol) can be obtained with a threshold 10 –7 , while the compression factor is typically between 2 and 2.5.

basis sets↗
DOE OSTI2026

Enhancing the efficiency of time-dependent density functional theory calculations of dynamic response properties

X-ray Thomson scattering (XRTS) constitutes an essential technique for diagnosing material properties under extreme conditions, such as high pressures and intense laser heating. Time-dependent density functional theory (TDDFT) is one of the most accurate available ab initio methods for modeling XRTS spectra, as well as a host of other dynamic material properties. However, strong thermal excitations, along with the need to account for variations in temperature and density as well as the finite size of the detector significantly increase the computational cost of TDDFT simulations compared to ambient conditions. In this work, we present a broadly applicable method for optimizing and enhancing the efficiency of TDDFT calculations. Our approach is based on a one-to-one mapping between the dynamic structure factor and the imaginary time density–density correlation function, which naturally emerges in Feynman’s path integral formulation of quantum many-body theory. Specifically, we combine rigorous convergence tests in the imaginary time domain with a constraints-based attenuation of narrow-band fluctuations to improve the efficiency of TDDFT modeling without the introduction of any significant bias. As a result, we can report a speed-up by up to an order of magnitude, thus substantially reducing the burden of computational cost required for XRTS analysis.

Moldabekov, Zhandos A. [Helmholtz-Zentrum Dresden-↗
DOE OSTI2020

Radionuclide incorporation in negative thermal expansion α-Zr(WO 4 ) 2 : A density functional theory study

The incorporation of uranium, plutonium and technetium in the negative thermal expansion (NTE) α-Zr (WO 4 ) 2 has been investigated within the framework of density functional theory (DFT). It is found that the vacancy formation energies of the charged vacancies are overall larger than that of its counterpart neutral Frenkel defects and Schottky defects. DFT calculations suggest that U and Pu substitutions for the Zr site are preferred in α-Zr (WO 4 ) 2 . In case of Tc substitution, both Tc(IV) for the Zr site and Tc(VII) for the W site are considered under oxygen-poor and oxygen-rich conditions, while Tc(VII) substitution can be improved significantly by including Y 2 O 3 (charge compensation).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Analysis and visualization of energy densities. II. Insights from linear-response time-dependent density functional theory calculations

Inspired by the analysis of Kohn–Sham energy densities by Nakai and coworkers, we extended the energy density analysis to linear-response time-dependent density functional theory (LR-TDDFT) calculations. Using ethylene–tetrafluoroethylene and oxyluciferin–water complexes as examples, distinctive distribution patterns were demonstrated for the excitation energy densities of local excitations (within a molecular fragment) and charge-transfer excitations (between molecular fragments). It also provided a simple way to compute the effective energy of both hot carriers (particle and hole) from charge-transfer excitations via an integration of the excitation energy density over the donor and acceptor grid points.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Toward a better understanding of Ni coarsening in solid oxide cells: NiH on Ni (111) examined at the level of density-functional theory (and KMC)

Ni coarsening in the fuel electrode of solid oxide cells (SOCs) is known to be significantly faster under a humid atmosphere. In this talk, density-functional theory and kinetic Monte Carlo methods are used to explore the hypothesis that the surface diffusion of NiH on Ni may promote Ni coarsening in the SOC operated in electrolysis cell mode. Defining the surface diffusivity as the product of the fractional surface coverage and single-molecule surface diffusivity, the surface diffusivity of NiH on Ni (111) is found to be large enough under a significant overpotential to support the above hypothesis. However, as NiH could dissociate on Ni (111), more work is needed to show that NiH may promote Ni coarsening.

Mantz, Yves↗
DOE OSTI2022

Structure, Stability, and Electronic Properties of Boron Suboxide: A Density Functional Theory Study

Boron suboxide (B 6 O) is a boron-rich compound derived from the α-rhombohedral boron lattice with extreme hardness and unusual semiconducting properties. In this work, density functional theory (DFT) was used to show that unit cell volume, mechanical strength, band gaps, and thermodynamic stabilities of B 6 O were influenced by the interstitial elements and point defects at the icosahedral sites. While the hexagonal unit cell volume (HUCV) varies with interstitial occupancy, it is the icosahedral defect that weakens the intrinsic bulk modulus of B 6 O. Using the hybrid HSE functional, we confirmed that the perfect B 6 O bulk is a p-type semiconductor with a direct band gap of 2.8 eV. Furthermore, by screening α-boron compounds systematically, we found that a simple octet rule may offer a consistent explanation for the variations in the computed electronic structures. The formation free energies calculated over a wide range of temperatures (0–2500 K) and pressures (0–80 GPa) predict that formations of interstitial defects become favorable only at higher temperatures (ca. 1800 K) in bulk B 6 O lattices. The nudged elastic band (NEB) method was employed to identify the minimum energy pathways for the diffusions of dislocated B and O atoms. The diffusion of icosahedral B atoms has an energy barrier of 0.16 eV. More complex B diffusion paths involving the reorganization of icosahedral boron atoms incur higher barriers (>1 eV). In contrast, the diffusion of interstitial O atoms is facile with a barrier of 0.4 eV. Lastly, successive O insertions into the α-B lattice were performed using DFT to generate a basic understanding of the oxidation process. Furthermore, these calculations provide fundamental atomistic insights into the growth of B 6 O crystals and control of their point defects.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamical structure factors of warm dense matter from time-dependent orbital-free and mixed-stochastic-deterministic density functional theory

Abstract We present the first calculations of the inelastic part of the dynamical structure factor (DSF) for warm dense matter (WDM) using time-dependent orbital-free density functional theory (TD-OF-DFT) and mixed-stochastic-deterministic (mixed) Kohn Sham TD-DFT (KS TD-DFT). WDM is an intermediate phase of matter found in planetary cores and laser-driven experiments, where the accurate calculation of the DSF is critical for interpreting x-ray Thomson scattering measurements. Traditional TD-DFT methods, while highly accurate, are computationally expensive, motivating the exploration of TD-OF-DFT and mixed TD-KS-DFT as more efficient alternatives. We applied these methods to experimentally measured WDM systems, including solid-density aluminum and beryllium, compressed beryllium, and carbon–hydrogen mixtures. Our results show that TD-OF-DFT requires a dynamical kinetic energy potential in order to qualitatively capture the plasmon response. Additionally, it struggles with capturing bound electron contributions. In contrast, mixed TD-KS-DFT offers greater accuracy in distinguishing bound and free electron effects, aligning well with experimental data, though at a higher computational cost. This study highlights the trade-offs between computational efficiency and accuracy, demonstrating that TD-OF-DFT remains a valuable tool for rapid scans of parameter space, while mixed TD-KS-DFT should be preferred for high-fidelity simulations. Our findings provide insight into the future development of DFT methods for WDM and suggest potential improvements for TD-OF-DFT.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Irreversible oxygen poisoning: Modeling the initial water dissociation kinetics on δ-Pu(111) and δ-Pu(100) through density functional theory

In this work, the initial kinetics of water dissociation on two facets of δ-plutonium, δ-Pu(111) and δ-Pu(100), are explored through density functional theory in order to understand how water dissociation occurs on these facets. We explored the dissociation of water via the formation of hydroxyls, atomic hydrogen, and atomic oxygen species on each facet. We calculate low energetic barriers for water to split to adsorbed hydrogen and hydroxyl species at 0.19 eV for δ-Pu(111) and 0.07 eV for δ-Pu(100). The hydroxyl has a barrier of 0.64 and 0.37 eV to cleave the hydrogen–oxygen bond on δ-Pu(111) and δ-Pu(100), respectively. Due to the highly exergonic adsorption free energy of atomic oxygen of −2.10 eV, the metallic surfaces are found to be fully covered in oxygen, even with the inclusion of oxygen lateral interactions. When combined with the reaction thermodynamics, this free energy of adsorption forms a molecular oxygen desorption barrier greater than 9.51 eV (918 kJ/mol). These results, combined with simulated temperature programed desorption spectra, indicate that oxygen formed via water dissociation on δ-Pu (111) and (100) facets induces an irreversible poison that prevents further reaction of water directly on metallic plutonium surfaces, most likely due to the strong hybridization of the Pu and O valence states. Therefore, these results imply that another mechanism is responsible for the continuously experimentally measured water dissociation, which is most likely due to the Pu oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electron-Ion Dynamics with Time-Dependent Density Functional Theory: Towards Predictive Solar Cell Modeling

This project focussed on two aspects of computational modeling with a view toward application for photovoltaic design: (i) increased reliability of exchange-correlation functionals in time-dependent density functional theory (TDDFT) (a method of choice of the calculation of electronic spectra and dynamics), especially for time-resolved non-perturbative dynamics, and (ii) the development of a practical but rigorously-based method for coupling electronic and nuclear motion via the exact-factorization (EF) approach (a relatively new framework for developing approximations).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Accurate Electron-Phonon Interactions from Advanced Density Functional Theory

Electron-phonon coupling (EPC) is key to understanding charge transport, band renormalization, and superconductivity in energy materials, including correlated transition-metal oxides, ferroelectric perovskites, optoelectronic semiconductors, and phonon-mediated superconductors. Although first-principles density functional theory (DFT)-based EPC calculations are used widely, their predictive power is limited by the accuracy, transferability, and efficiency of the underlying exchange-correlation functionals. These limitations become exacerbated in complex 𝑑- and 𝑓-electron materials, where beyond-DFT approaches and additional corrections, such as the Hubbard 𝑈, are commonly invoked. Here, using the examples of Co⁢O and Ni⁢O, we show how the 𝑟 2 SCAN density functional correctly captures strong EPC effects in transition-metal oxides without requiring the introduction of Hubbard 𝑈 parameters. We also find that 𝑟 2 SCAN successfully describes the subtle interplay between ionic and covalent bonding, and strong EPC effects in the low-temperature rhombohedral phase of the prototypical ferroelectric Ba⁢Ti⁢O 3 , without requiring Hubbard 𝑈 and intersite 𝑉 corrections. We further demonstrate the ability of 𝑟 2 SCAN to accurately model the EPC of the main-group semiconductor Ga⁢As and the phonon-mediated superconducting properties of Mg⁢B 2 , with reliable electronic bands and phonons. Our study establishes 𝑟 2 SCAN-based EPC as a transferable, parameter-free, and computationally efficient framework for predictive material-specific modeling of EPC in energy materials, and opens a practical route toward high-throughput screening of superconductors, thermoelectrics, optoelectronic semiconductors, and oxide electrodes and catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

First-Principles Study on the Electronic Properties of PDPP-Based Conjugated Polymer via Density Functional Theory

In this study, we focus on computational predictions of the electronic and optical properties of a one-dimensional periodic model of a single chain of a diketopyrrolopyrrole (DPP)-based conjugated polymer (PDPP3T) as a function of electronic configuration changes due to charge injection. Here, we employ density functional theory (DFT) to explore the ground-state and excited-state electronic properties as well as optical properties influenced by charge injection. We utilize both the Heyd–Scuseria–Ernzerhof (HSE06) and Perdew–Burke–Ernzerhof (PBE) functionals to predict the band gap and compute the absorption spectrum. Our DFT results point out that utilizing the HSE06 functional in conjunction with momentum sampling over the Brillouin zone can appropriately predict the band gap and absorption spectrum in good agreement with experimental data. Moreover, we explore the influence of charge-carrier injection on the electronic configuration of the PDPP3T polymer. Our results indicate that the injection of charge carriers into the PDPP3T semiconducting polymer model greatly affects the electrical properties and ends in a low band gap and high mobility of charge carriers in PDPP3T polymers, offering the potential to tailor the material electronic performance for organic photovoltaic and optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Hole Polaron Transport in Bismuth Vanadate BiVO 4 from Hybrid Density Functional Theory

In this paper, we address the chemical character and the mobility of hole polarons in BiVO 4 (BVO). Two distinct structures for hole polarons in BVO have been reported in the literature to date. “Standard” hybrid density functional theory (DFT) calculations have predicted hole polarons to be (BiO 8 ) dodecahedron-centered polarons, while Hubbard U-DFT (DFT + U) calculations have predicted single oxygen atom-centered polarons. Resolving these contrasting findings is critical to validate theory in materials research. We investigated the structure of hole polarons in BVO using hybrid DFT with varying fractions (α) of the exact exchange interaction that enters hybrid functionals. For values of the fraction α, from α = 0.25 to α = 0.45, we obtained both structures, the h + (BiO 8 ) hole structure and the h + (O) hole structure. For the smaller values of α, the h + (BiO 8 ) structure is lower in energy, while for the larger values of α, the h+(O) structure is more stable. The piece-wise linearity of DFT energies E(q) with respect to a point defect charge q is maintained satisfactorily in all cases, although the deviation is the smallest for hybrid DFT with a small exact exchange fraction. For α = 0.25, we determined the diffusivity of h + (BiO 8 ) holes from the Marcus/Holstein two-state model. The activation barrier for Bi-to-Bi hops (ΔG # ~76 meV) and mobility (μ ~0.029 cm2 V –1 s –1 ) are found to be in close agreement with the published THz experimental data (ΔG # ~90 meV and μ exp ~0.02 cm2 V –1 s –1 , respectively). In h + (BiO 8 ) structures, nearly 25% of the hole charge and unpaired spin reside on the Bi atom and the rest is divided among the eight O atoms. The hole is best described as a Bi-centered hole, rather than a Bi 6s hole. In contrast, in h + (O) structures, about 75% of the unpaired spin population resides on the O atom. These findings suggest that if one wishes to resolve this theoretical dichotomy, there remains a need for further experimental characterization of hole polarons in BVO with techniques that could identify the oxidation state of Bi and O atoms in operando conditions and help validate theoretical results of structure and transport.

14 SOLAR ENERGY↗
DOE OSTI2021

Crystal growth, density functional theory, and scintillation properties of Tl 3 LnCl 6 :Ce 3+ and TlLn 2 Cl 7 :Ce 3+ (Ln = Y, Gd)

In this paper we report on the crystal growth, density functional theory (DFT) calculations and scintillation properties of Tl 3 LnCl 6 :Ce and TlLn 2 Cl 7 :Ce(Ln = Y, Gd). Crystals were grown by the Vertical Bridgman technique up to 16 mm in diameter and 25 mm long. Crystals of Tl 3 YCl 6 :Ce and Tl 3 GdCl 6 :Ce belong to the family of the Nesohalides which have the monoclinic crystal structure. Crystals of TlY 2 Cl 7 :Ce and TlGd 2 Cl 7 :Ce belong to the family of the Phyllohalides which have either the monoclinic or the orthorhombic crystal structure. We report the light yields of these Nesohalides and Phyllohalides are typically on the order of 35,000–40,000 ph/MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗