Search NASA⌕ Search

SEARCH · Search NASA

Results for “hard disks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Pulsed coherent solid-state 1.06-micron and 2.1-micron laser radar systems for remote velocity measurement

A low average power, pulsed, solid-state, 1.06-micron coherent laser radar (CLR) for range and velocity measurements of atmospheric and hard targets has been developed. The system has been operating at a field test site near Boulder, CO since September, 1988. Measurements have been taken on moving targets such as atmospheric aerosol particles, belt sanders, spinning disks, and various stationary targets. The field measurements have shown that this system exhibits excellent velocity measurement performance. A fast-tuning CW Nd:YAG oscillator has also been developed which has a frequency tuning range of greater than 30 GHz (which spans a target radial velocity range of over 16 km/s) and a tuning speed greater than 30 GHz/ms.

Henderson, Sammy W.↗
NASA NTRS2003

The Far-Infrared Spectral Energy Distributions of X-ray Selected Active Galaxies

This paper reports the ISO results on hard X-ray selected AGN which are less biased against red/obscured objects than other selection wavebands. We find that, as predicted, the IR continuum of these sources extends to redder sources than in optically/radio selected sample. This indicates that the latter samples miss a portion of the population which is fainter in the optical but can be easily picked up in the hard X-ray. The range of IR SEDs is roughly consistent with reddening of the IR continuum up to column densities of around 10(exp 23)/cu cm. Modeling of the full SED using dusty disk models demonstrated that varying the viewing angle can explain the observed SEDs, though rather large disks are required to fit the cooler, long wavelength emission. From the fits we can obtain estimates of the mass and inclination of the system.

Kuraszkiewicz, J. K.↗
NASA NTRS1979

Wear of aluminum and hypoeutectic aluminum-silicon alloys in boundary-lubricated pin-on disk sliding

The friction and wear of pure aluminum and a number of hypoeutectic aluminum-silicon alloys (with 3 to 12 wt %Si) were studied with a pin-on-disk apparatus. The contacts were lubricated with mineral oil and sliding was in the boundary-lubrication regime at 2.6 cm/sec. Surfaces were analyzed with photomicrographs, scanning electron microscopy, X-ray dispersive analysis, and diamond pyramid hardness measurements. There were two wear regimes for the alloys - high and low - whereas pure aluminum exhibited a high wear rate throughout the test period. Wear rate decreased and the transition stress from high to low wear increased with increasing hardness. There was no correlation between friction coefficient and hardness. A least squares curve fit indicated a wear-rate dependence greater than the inverse first power of hardness. The lower wear rates of the alloys may be due to the composites of silicon platelets in aluminum resulting in increased hardness and thus impairing the shear of the aluminum.

Ferrante, J.↗
NASA NTRS1978

Orbital elements of 4U 0115+63 and the nature of the hard X-ray transients

Extended SAS 3 timing observations of the hard transient X-ray source 4U 0115+63 are reported, and a definitive measurement of the binary orbit of this transient source is presented. It is shown that this source is in a long orbit (period of approximately 24.3 days) that is moderately eccentric (e about 0.34) and that the mean value of the rate of decrease of the pulse period is consistent with the expected spinup of a rotating neutron star that is accreting from a disk. A distance of about 2.5 kpc is inferred, and the B-star optical counterpart is estimated to have an absolute magnitude of approximately -1.5 and a mass of at least 5 solar masses. It is suggested that the companion is a Be star which does not fill its Roche lobe and that the eccentricity and transient nature of the source result from the large orbital separation. It is proposed that hard X-ray transients as a class are collapsed stars (perhaps all neutron stars) in binary systems that are substantially wider than the more persistent X-ray binaries and that the large orbital separation, the small radius of the companion, or both, result in episodic rather than continuous mass transfer onto the X-ray star.

Rappaport, S.↗
NASA NTRS1982

Wire EDM for Refractory Materials

In an attempt to reduce fabrication time and costs, Wire Electrical Discharge Machine (Wire EDM) method was investigated as tool for fabricating matched blade roots and disk slots. Eight high-strength nickel-base superalloys were used. Computer-controlled Wire EDM technique provided high quality surfaces with excellent dimensional tolerances. Wire EDM method offers potential for substantial reductions in fabrication costs for "hard to machine" alloys and electrically conductive materials in specific high-precision applications.

Zellars, G. R.↗
NASA NTRS1994

Spectral variations in the low-mass X-ray binary 4U 0614+09

We report the X-ray spectra of a binary 4U 0614+09 observed with EXOSAT on five different occasions in 1984 and 1986. In four observations in 1984, the source intensity was 'low' compared to its intensity in the 1986 observation. The source was steady on timescales of 10 to 1000 s in each of the 1984 observations but highly variable during the 1986 variations. The best-fit spectral models for the continuum are a blackbody spectrum plus an emission from a Comptonized region. In addition, a component due to reflection from a cold disk around the source was needed as an absorbiton edge due to cold or ionized iron was seen near 7 keV with good significance in most of the spectra, particularly in the 'low' state. The relation of the hardness ratios with intensity follow the behavior seen in the 'Atoll' sources. We have studied the behavior of the hardness ratios with the variations in the parameters of the best-fit spectral models. Most of the variability is associated with the blackbody component thought to arise from the boundary layer on the surface of the neutron star. During the 'high' state in 1986, the blackbody temperature is higher, its size smaller, and its contribution significantly greater than in the 'low' state. The other notable difference between the two states is the lower opacity in the Comptonized region, and a significantly higher absorption in the 'high' state. A weak line emission (equivalent width = 10 to 40 eV) is detected during the 'high' state. The line energy lies between 6 and 7 keV wh ich implies its origin from ionized iron.

Singh, K. P.↗
NASA NTRS2022

Extreme Energetic Particle Events By Superflare-Associated CMES From Solar-Like Stars

Discovery of frequent superflares on active cool stars opened a new avenue in understanding the properties of eruptive events and their impact on exoplanetary environments. Solar data suggest that coronal mass ejections (CMEs) should be associated with superflares on active solar-like planet hosts and produce solar/stellar energetic particle (SEP/StEP) events. Here, we apply the 2D Particle Acceleration and Transport in the Heliosphere model to simulate the SEPs accelerated via CME-driven shocks from the Sun and young solar-like stars. We derive the scaling of SEP fluence and hardness of energy spectra with CME speed and associated flare energy. These results have crucial implications for the prebiotic chemistry and expected atmospheric biosignatures from young rocky exoplanets as well as the chemistry and isotopic composition of circumstellar disks around infant solar-like stars.

Junxiang Hu↗
NASA NTRS2024

Highly Significant Detection of X-Ray Polarization from the Brightest Accreting Neutron Star Sco X-1

The Imaging X-ray Polarimetry Explorer measured with high significance the X-ray polarization of the brightest Z-source, Sco X-1, resulting in the nominal 2–8 keV energy band in a polarization degree of 1.0% ± 0.2% and a polarization angle of 8° ± 6° at a 90% confidence level. This observation was strictly simultaneous with observations performed by NICER, NuSTAR, and Insight-HXMT, which allowed for a precise characterization of its broadband spectrum from soft to hard X-rays. The source has been observed mainly in its soft state, with short periods of flaring. We also observed low-frequency quasiperiodic oscillations. From a spectropolarimetric analysis, we associate a polarization to the accretion disk at <3.2% at 90% confidence level, compatible with expectations for an electron scattering dominated optically thick atmosphere at the Sco X-1 inclination of ∼44°; for the higher-energy Comptonized component, we obtain a polarization of 1.3% ± 0.4%, in agreement with expectations for a slab of Thomson optical depth of ∼7 and an electron temperature of ∼3 keV. A polarization rotation with respect to previous observations by OSO-8 and PolarLight, and also with respect to the radio-jet position angle, is observed. This result may indicate a variation of the polarization with the source state that can be related to relativistic precession or a change in the corona geometry with the accretion flow.

Fabio La Monaca↗
NASA NTRS2015

Tribological Evaluation of Candidate Gear Materials Operating Under Light Loads in Highly Humid Conditions

A series of pin-on-disk sliding wear tests were undertaken to identify candidate materials for a pair of lightly loaded timing gears operating under highly humid conditions. The target application involves water purification and thus precludes the use of oil, grease and potentially toxic solid lubricants. The baseline sliding pair is austenitic stainless steel operating against a carbon filled polyimide. The test load and sliding speed (4.9N, 2.7ms) were chosen to represent average contact conditions of the meshing gear teeth. In addition to the baseline materials, the hard superelastic NiTiNOL 60 (60NiTi) was slid against itself, against the baseline polyimide, and against 60NiTi onto which a commercially deposited dry film lubricant (DFL) was applied. The alternate materials were evaluated as potential replacements to achieve a longer wear life and improved dimensional stability for the timing gear application. An attempt was also made to provide solid lubrication to self-mated 60NiTi by rubbing the polyimide against the disk wear track outside the primary 60NiTi-60NiTi contact, a method named stick or transfer-film lubrication. The selected test conditions gave repeatable friction and wear data and smooth sliding surfaces for the baseline materials similar to those in the target application. Friction and wear for self-mated stainless steel were high and erratic. Self-mated 60NiTi gave acceptably low friction (0.2) and modest wear but the sliding surfaces were rough and potentially unsuitable for the gear application. Tests in which 60NiTi pins were slid against DFL coated 60NiTi and DFL coated stainless steel gave low friction and long wear life. The use of stick lubrication via a secondary polyimide pin provided effective transfer film lubrication to self-mated 60NiTi tribological specimens. Using this approach, friction levels were equal or lower than the baseline polyimide-stainless combination and wear was higher but within data scatter observed in these preliminary tests. Based upon these results, self-mated 60NiTi gear teeth utilizing solid lubrication, is a reasonable approach for the target application.

tribology↗
NASA NTRS2015

Tribological Evaluation of Candidate Gear Materials Operating Under Light Loads in Highly Humid Conditions

A series of pin-on-disk sliding wear tests were undertaken to identify candidate materials for a pair of lightly loaded timing gears operating under highly humid conditions. The target application involves water purification and thus precludes the use of oil, grease and potentially toxic solid lubricants. The baseline sliding pair is austenitic stainless steel operating against a carbon filled polyimide. The test load and sliding speed (4.9 N, 2.7 m/s) were chosen to represent average contact conditions of the meshing gear teeth. In addition to the baseline materials, the hard superelastic NiTiNOL 60 (60NiTi) was slid against itself, against the baseline polyimide, and against 60NiTi onto which a commercially deposited dry film lubricant (DFL) was applied. The alternate materials were evaluated as potential replacements to achieve a longer wear life and improved dimensional stability for the timing gear application. An attempt was also made to provide solid lubrication to self-mated 60NiTi by rubbing the polyimide against the disk wear track outside the primary 60NiTi-60NiTi contact, a method named stick or transfer-film lubrication. The selected test conditions gave repeatable friction and wear data and smooth sliding surfaces for the baseline materials similar to those in the target application. Friction and wear for self-mated stainless steel were high and erratic. Self-mated 60NiTi gave acceptably low friction (approx. 0.2) and modest wear but the sliding surfaces were rough and potentially unsuitable for the gear application. Tests in which 60NiTi pins were slid against DFL coated 60NiTi and DFL coated stainless steel gave low friction and long wear life. The use of stick lubrication via the secondary polyimide pin provided effective transfer film lubrication to self-mated 60NiTi tribological specimens. Using this approach, friction levels were equal or lower than the baseline polyimide-stainless combination and wear was higher but within data scatter observed in these preliminary tests. Based upon these results, self-mated 60NiTi gear teeth utilizing solid lubrication, is a reasonable approach for the target application.

tribology↗
NASA NTRS2012

X-Ray and Optical Observations of A 0535+26

We present recent contemporaneous X-ray and optical observations of the Be/X-ray binary system A 0535+26 with the Fermi/Gamma-ray Burst Monitor (GBM) and several ground-based observatories. These new observations are put into the context of the rich historical data (since 1978) and discussed in terms of the neutron-star-Be-disk interaction. The Be circumstellar disk was exceptionally large just before the 2009 December giant outburst, which may explain the origin of the unusual recent X-ray activity of this source. We found a peculiar evolution of the pulse profile during this giant outburst, with the two main components evolving in opposite ways with energy. A hard 30-70 mHz X-ray quasi-periodic oscillation was detected with GBM during this 2009 December giant outburst. It becomes stronger with increasing energy and disappears at energies below 25 keV. In the long term a strong optical/X-ray correlation was found for this system, however in the medium term the Halpha equivalent width and the V-band brightness showed an anti-correlation after 2002 August. Each giant X-ray outburst occurred during a decline phase of the optical brightness, while the H showed a strong emission. In late 2010 and before the 2011 February outburst, rapid V/R variations are observed in the strength of the two peaks of the H line. These had a period of 25 days and we suggest the presence of a global one-armed oscillation to explain this scenario. A general pattern might be inferred, where the disk becomes weaker and shows V/R variability beginning 6 months following a giant outburst.

Camero-Arranz, A.↗
NASA NTRS1995

Pair cascades in extragalactic jets. 1: Gamma rays

A model of the approximately 0.1-10 GeV gamma-ray jets observed by the EGRET instrument on the Compton Gamma Ray Observatory (CGRO) is developed. It is shown that the soft X-ray background in an active galactic nuclei (AGN) contributes an opacity to pair production and that a gamma-ray photosphere or 'gamma-sphere' can be defined whose radius increases with gamma-ray energy E(sub gamma). It is proposed that the observed gamma-ray emission is due to inverse Compton scattering of the ambient soft X-rays by relativistic pairs accelerated in situ by shock fronts in a relativistic jet. For a wide range of assumed physical conditions, the emission at a given E(sub gamma) originates from near the associated gamma-spheres; emission from below the gamma-sphere initiates a cascade down to the energy where the gamma-rays can escape freely. In this model, the slope of the emergent gamma-ray spectrum is determined by the scattered, soft X-ray spectrum and the variation of the particle acceleration rate with jet radius. In general it is expected that the variation in the gamma-ray flux will be either slower or later at higher energy. It is also shown that the efficiency of conversion of energy from injected high-energy pairs to 0.1-10 GeV gamma-rays is typically high so that the models are radiatively efficient. It is argued that the observed gamma-ray jets are likely to be particle-dominated, though magnetically confined. The gamma-ray spectrum should continue down to an energy approximately 5 MeV emitted from an annihilation radius within which the pair content of the jet is limited by annihilation. This is probably the site of the beamed hard X-ray emission. It is speculated that the relativistic jets associated with radio-loud AGNs are powered electromagnetically by a spinning black hole and that they are collimated by an encircling MHD wind leaving the accretion disk at a slower speed. Powerful FR2 radio sources are formed when the hole spins rapidly and the relativistic core accelerates the MHD sheath; low-power FR1 sources ensue when the opposite occurs. Finally, it is suggested that the key factor which determines whether or not a given active nucleus can form a jet and a radio to gamma-ray nonthermal continuum is the central density of mass-losing stars which, when large, precludes the formation of a super-Alfvenic, collimating wind.

Blandford, R. D.↗
NASA NTRS1999

Black Hole X-Ray Nova Outburst with XTE and HST

We obtained multiwavelength coverage of the soft X-ray transient GRO J1655-40 during its 1996 outburst, using HST, RXTE, CGRO, and ground-based facilities. This outburst was qualitatively different from other SXT outbursts and from previous outbursts of this source. The onset of hard X-ray activity occurred very slowly, over several months, and was delayed relative to the soft X-ray rise. During this period, the optical fluxes declined steadily. This apparent anticorrelation is not consistent with with the standard disk instability model of SXT outbursts, nor is it expected if the optical output is dominated by reprocessed X-rays, as in persistent low-mass X-ray binaries. .

Patterson, Joseph↗
NASA NTRS1998

Black Hole X Ray Nova Outburst with XTE and HST

We obtained multiwavelength coverage of the soft X-ray transient. GRO J1655-40 during its 1996 outburst, using HST (Hubble Space Telescope), RXTE (Rossi X Ray Timing Explorer), CGRO (Compton Gamma Ray Observatory), and ground-based facilities. This outburst was qualitatively different from other SXT (Soft X Ray Telescope) outbursts and from previous outbursts of this source. The onset of hard X-ray activity occurred very slowly, over several months, and was delayed relative to the soft X-ray rise. During this period, the optical fluxes declined steadily. This apparent anticorrelation is not consistent with with the standard disk instability model of SXT outbursts, nor is it expected if the optical output is dominated by reprocessed X-rays, as in persistent low-mass X-ray binaries. Based on the strength of the 2175-A interstellar absorption feature, we constrain the reddening to be E(B - V) = 1.2 plus or minus 0.1, a result which is consistent with the known properties of the source and with the strength of other interstellar absorption lines. After this dereddening we find that the spectra are dominated by a component peaking in the optical, with the expected v (sup l/3) disk spectrum seen only in the ultraviolet. Bowen fluorescence lines of NIII and OIII are also seen, as well as possible P Cyg profiles in the ultraviolet resonance lines. These features suggest an accretion-disk wind. The X-ray spectra broadly resemble the high/soft state commonly seen in black hole candidates, but evolve through two substates.

Patterson, Joseph↗
NASA NTRS1981

The amazing X-ray light curve of 2A 0311-227

The X-ray light curve of the AM Herculis-type binary 2A 0311-227 is presented. A smooth modulation of the X-ray flux at the orbital period is obtained, along with an eclipse feature that is total for 0.1-0.8 keV photons yet not visible for photons above about 3 keV. This strong and smooth dependence on energy suggests an origin in the obscuration of the X-ray emitting region by a column of accreting gas. Furthermore, very strong quasi-periodic pulsations with a period of about 6 min are found in the soft X-ray light curve. This periodicity is also present in the optical and hard X-ray light curves, and in the circular polarization data. It seems likely that the periodicity arises from a modulation of the mass accretion rate onto the white dwarf, and possible that it originates in pulsations of a disk-magnetosphere boundary.

Patterson, J.↗
NASA NTRS1983

Accreting degenerate dwarfs in close binary systems

Advances in the study of cataclysmic variables made during the past few years are reviewed. The classification of cataclysmic binaries and their dynamic properties are summarized. The hard and soft X-ray emission from these objects is discussed, and two alternative accretion geometries for producing this radiation from deep in the potential well of the degenerate dwarf are considered. The ultraviolet and optical spectrum is addressed, including disk emission and contributions from the companion star. Magnetic fields in cataclysmic variables are discussed, and the temporal behavior of these stars is addressed, including periodic modulations associated with orbital motion and rotation as well as flickering and pulsation reflecting the mass transfer process and the dynamics of matter near the surface of the accreting star. The outburst process is considered, including classical novae, recurrent novae, and dwarf novae.

Cordova, F. A.↗
NASA NTRS1989

Emission lines from X ray binaries

Emission lines are probes of the conditions in the accretion flows associated with binary X-ray sources. The hard X-ray iron K line, soft X-ray lines, and UV lines, and what they indicate about the conditions in binary X-ray sources are discussed. These lines are interpreted using an X-ray illuminated accretion disk model. The structure and dynamics of the heated disk, its spectral signatures, and the major unsolved theoretical issues surrounding them are investigated.

Kallman, T. R.↗
NASA NTRS1988

Theory of magnetic cataclysmic binary X-ray sources

The theory of magnetic cataclysmic binary X-ray sources is reviewed. The physics of the accretion torque for disk and for stream accretion is described, and the magnetic field strengths of DQ Her stars inferred from their spin behavior and of AM Her stars from direct measurement are discussed. The implications of disk and stream accretion for the geometry of the emission region and for the X-ray pulse profiles are considered. The physicl properties of the X-ray emission region and the expected infrared, optical, soft X-ray, and hard X-ray spectra are described. The orientations of the magnetic moment in AM Her stars inferred from the circular and linear polarization of the optical light and the optical light curve are commented on.

Lamb, Don Q.↗