Search NASA⌕ Search

SEARCH · Search NASA

Results for “heterogeneous nucleation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

227 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Neural network kinetics for exploring diffusion multiplicity and chemical ordering in compositionally complex materials

Diffusion involving atom transport from one location to another governs many important processes and behaviors such as precipitation and phase nucleation. The inherent chemical complexity in compositionally complex materials poses challenges for modeling atomic diffusion and the resulting formation of chemically ordered structures. Here, we introduce a neural network kinetics (NNK) scheme that predicts and simulates diffusion-induced chemical and structural evolution in complex concentrated chemical environments. The framework is grounded on efficient on-lattice structure and chemistry representation combined with artificial neural networks, enabling precise prediction of all path-dependent migration barriers and individual atom jumps. To demonstrate the method, we study the temperature-dependent local chemical ordering in a refractory NbMoTa alloy and reveal a critical temperature at which the B2 order reaches a maximum. The atomic jump randomness map exhibits the highest diffusion heterogeneity (multiplicity) in the vicinity of this characteristic temperature, which is closely related to chemical ordering and B2 structure formation. The scalable NNK framework provides a promising new avenue to exploring diffusion-related properties in the vast compositional space within which extraordinary properties are hidden.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An assessment of spall failure modes in laser powder bed fusion fabricated stainless steel 316L with low-volume intentional porosity

Here, this paper reports on spall failure and damage modes in Laser Powder Bed Fusion fabricated Stainless Steel 316L (SS316L) with intentional levels of low-volume (1–5 vol. %) porosity and pore sizes of 200, 350, and 500 μm. The fabricated specimens were subjected to uniaxial-strain plate-impact loading at ~4.5 GPa, to initiate incipient spall failure. Analysis of velocimetry profiles measured using multi-probe photon-Doppler velocimetry coupled with post-mortem analysis of soft-recovered samples reveals local suppression of spall failure (termed as spall-dominated) as a function of porosity, as the failure mechanism transitions from spall-centered tensile stress dominated to a pore-centered microstructure-dominated damage mode involving void/crack nucleation and growth at pre-existing pores. The critical porosity level where the suppression of spall failure is first observed, as well as the spall location, is dependent on both the volume fraction and the size of the initially fabricated pores. In samples of 500 μm pore size, the suppression of spall failure is observed with as little as 1 vol. % porosity, while samples with smaller pores (200 μm) still experience spall-centered tensile stress dominated failure with higher levels (5 vol. %) of porosity. In the case of pore-centered microstructure-dominated failure, spall damage can occur but the spall plane is shifted toward the rear free surface, or more generally in areas further away from the region with pores. Highly heterogeneous deformation twinning, shear banding, grain rotation, and cracking are observed in the vicinity of pre-existing pores and expected spall failure sites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

TRACER-VOC: Speciated Volatile Organic Compounds at the Tracking Aerosol Convection Interactions Experiment Field Campaign Report

Formation of secondary organic aerosol (SOA) is responsible for the growth of particles into cloud condensation nuclei (CCN)-relevant sizes and accounts for a substantial fraction of aerosol mass in the troposphere. Despite its wide abundance and importance, capturing SOA in regional and climate models is still challenging due to complex chemical transformations involved in production of SOA. Oxidation products of biogenic hydrocarbons, such as isoprene, monoterpenes, and sesquiterpenes account for the largest fraction of SOA mass over the continents. As such, biogenic SOA is an important source of continental CCN, and has been recently shown to nucleate ice in the deposition mode. To better account for the processes involved in SOA formation in global and regional climate models, we need better measurements of sources and transformations of volatile organic compounds (VOCs), the precursors to SOA formation in the atmosphere. Understanding aerosol-deep convection interactions is an important science driver of the Tracking Aerosol Convection Interactions Experiment (TRACER), requiring a characterization of the critical controls on aerosol properties and processes, and how those properties and processes vary spatially and temporally in the Houston area. In that environment, the atmospheric photo-oxidative chemistry that drives the evolution and transformation of aerosol properties and processes is strongly impacted by the emission of VOCs, which have both anthropogenic (e.g., industrial, urban, transportation, biomass burning) and biogenic (e.g., marine) sources in the region. Understanding (and disentangling) the complex role of VOCs in such a heterogenous region requires high-time-resolution, speciated VOC measurements that are spatially resolved. To meet these measurement requirements, the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s time-of-flight proton transfer reaction-mass spectrometer (ToF-PTR-MS) was deployed during the TRACER intensive operational period (IOP) from June to September, 2022 at the ancillary site (ANC), which was sited to provide a characterization of the rural atmospheric environment in contrast to the main site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Effects of Sodium and Magnesium Ions on the Photochemically Induced Heterogeneous Formation of Manganese Oxides and Their Structural Evolution

Manganese (Mn) oxides are abundant in aquatic and terrestrial environments, where they play significant roles in redox cycling and biological metabolisms. We recently observed that Mn oxides were homogeneously formed during the abiotic oxidation of Mn 2+ (aq) to Mn(IV) by O 2 •– via nitrate photolysis, at a rate comparable to that of biotic Mn oxide formation. On the other hand, for the heterogeneous formation of Mn oxides, the presence of a substrate can alter the required thermodynamic driving force, which may affect their crystalline phases and further influence the oxidative capability of redox cycling in environmental systems. However, little is known about the photochemically induced heterogeneous formation of Mn oxides on substrates. In this study, we investigated the heterogeneous formation of Mn oxides on a quartz substrate in the presence of two environmentally abundant cations, Na + and Mg 2+ . In contrast to homogeneously generated Mn oxides, the heterogeneously formed Mn oxides displayed faster crystalline phase evolutions and morphological changes over time. Additionally, the coexistence of Na + and Mg 2+ ions greatly affected the initial crystalline phases and the phase evolution, as well as the surface morphologies of the Mn oxides. Finally, these discoveries contribute to our understanding of how various Mn oxides form in nature and provide insights into the processes involved in manufacturing specific Mn oxide crystalline structures for engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deciphering the Distribution and Crystal-Chemical Environment of Arsenic, Lead, Silica, Phosphorus, Tin, and Zinc in a Porous Ferrihydrite Grain Using Transmission Electron Microscopy and Atom Probe Tomography

Here the interaction of contaminants and nutrients with soil constituents is controlled by processes in intergranular and intragranular pore spaces of organic matter or/and common secondary minerals such as ferrihydrite, ~Fe 3+ 10 O 14 (OH) 2 . This contribution shows that distribution and clustering of the contaminants As, P, Pb, Si, Sn, and Zn in a porous ferrihydrite grain is greatly affected by the heterogeneous size distribution and chemical composition of the pores as well as the ability of their polyhedra to polymerize with the same type of polyhedron. Transmission electron microscopy (TEM) and atom probe tomography (APT) studies are conducted on focused ion beam (FIB) sections extracted from a porous ferrihydrite grain from the smelter-impacted topsoil in Sudbury, Ontario, Canada. The ferrihydrite grain has pore spaces ranging in diameter from tens to hundreds of nanometers. TEM and scanning-TEM studies indicate that the surfaces of the pore walls are enriched in Si. APT data in conjunction with First Near Neighbor (1NN) analyses indicate different degrees of clustering of Pb, As, Sn, Zn, Si, and P within the sample and selected domains. Careful evaluations of 3D atomic plots and 1NN distances indicates the occurrence of polymerized arsenite-, silica-, Sn-, and Zn-polyhedra within pore spaces of the ferrihydrite. Deciphering adsorption, polymerization, and nucleation processes in porous Fe-(hydr)oxides and other soil constituents requires multianalytical approaches and, in this regard, we discuss the advantages and disadvantages of the combination of TEM and APT for characterizing complex environmental samples at the atomic to nanometer scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Scalable Synthesis of Pt/SrTiO 3 Hydrogenolysis Catalysts in Pursuit of Manufacturing-Relevant Waste Plastic Solutions

Here, an improved hydrothermal synthesis for shape-controlled, size-controlled 60 nm SrTiO 3 nanocuboid (STO NC) supports, which facilitates the scalable creation of platinum nanoparticles catalyst supported on STO (Pt/STO) for the chemical conversion of waste polyolefins, is reported herein. This synthetic method: 1) produces STO NC supports with average sizes ranging from 25 – 80 nm with narrow size distributions 2) demonstrates how SrCO 3 formation and variation in solution pH prevent the formation of STO NCs, and 3) establishes that STO nucleation prior to the hydrothermal treatment favors nanocuboid formation. The updated hydrothermal synthesis was scaled-up and conducted in a 4L batch reactor, resulting in STO NCs of comparable size and morphology (m = 22.5 g, d avg = 58.6 ± 16.2 nm) to those synthesized under standard hydrothermal conditions in a lab-scale 125 mL autoclave reactor. Size-controlled STO NCs, ranging in roughly 10 nm increments from the 25 nm to 80 nm, were used to support Pt deposited through strong electrostatic adsorption (SEA), a practical and scalable solution-based method. Using SEA techniques and a STO support with an average size of 39.3 ± 6.3 nm, a Pt/STO catalyst with 3.6 wt% Pt was produced and used for high-density polyethylene hydrogenolysis under previously-reported conditions (170 psi H 2 , 300°C, 96h; final product: M w = 2400, Ð = 1.03). As a well-established model system for studying the behavior of heterogeneous catalysts and their supports in reactions, the Pt/STO system detailed in this work presents a unique opportunity to simultaneously convert waste plastic into commercially-viable products while gaining fundamental insight into the mechanism of polyethylene hydrogenolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Observations of Clouds, Aerosols, Precipitation, and Surface Radiation over the Southern Ocean: An Overview of CAPRICORN, MARCUS, MICRE, and SOCRATES

Weather and climate models are challenged by uncertainties and biases in simulating Southern Ocean (SO) radiative fluxes that trace to a poor understanding of cloud, aerosol, precipitation, and radiative processes, and their interactions. Projects between 2016 and 2018 used in situ probes, radar, lidar, and other instruments to make comprehensive measurements of thermodynamics, surface radiation, cloud, precipitation, aerosol, cloud condensation nuclei (CCN), and ice nucleating particles over the SO cold waters, and in ubiquitous liquid and mixed-phase clouds common to this pristine environment. Data including soundings were collected from the NSF–NCAR G-V aircraft flying north–south gradients south of Tasmania, at Macquarie Island, and on the R/V Investigator and RSV Aurora Australis. Synergistically these data characterize boundary layer and free troposphere environmental properties, and represent the most comprehensive data of this type available south of the oceanic polar front, in the cold sector of SO cyclones, and across seasons. Results show largely pristine environments with numerous small and few large aerosols above cloud, suggesting new particle formation and limited long-range transport from continents, high variability in CCN and cloud droplet concentrations, and ubiquitous supercooled water in thin, multilayered clouds, often with small-scale generating cells near cloud top. These observations demonstrate how cloud properties depend on aerosols while highlighting the importance of dynamics and turbulence that likely drive heterogeneity of cloud phase. Satellite retrievals confirmed low clouds were responsible for radiation biases. Furthermore, the combination of models and observations is examining how aerosols and meteorology couple to control SO water and energy budgets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Emerging Potassium Metal Anodes: Perspectives on Control of the Electrochemical Interfaces

Potassium metal acts as the anode in emerging potassium metal batteries (KMBs). It further serves as the counter-electrode for potassium ion battery (KIB) half-cells, with its reliable performance being critical for assessing the working electrode material. This first-of-its-kind critical review focuses on the dual challenge of controlling the potassium metal-substrate and the potassium metal-electrolyte interface so as to prevent dendrites. The discussion begins with a comparison of the physical and chemical properties of K metal anodes versus the much oft studied Li and Na metal anodes. Based on established descriptions for root causes of dendrites, the problem should be less severe for K than for Li or Na, while in fact the opposite is observed. The key reason that the K metal surface rapidly becomes dendritic in common electrolytes is its unstable solid electrolyte interphase (SEI). An unstable SEI layer is defined as being non self-passivating. No SEI is perfectly stable during cycling, and all SEI structures are heterogenous both vertically and horizontally relative to the electrolyte interface. The difference between a "stable" and an "unstable" SEI may be viewed as the relative degree to which during cycling it thickens and becomes further heterogeneous. The unstable SEI on K metal leads to a number of interrelated problems, such as low cycling Coulombic efficiency (CE), a severe impedance rise, large overpotentials, and possibly electrical shorting; all of which have been reported to occur as early as in the first ten plating/stripping cycles. Many of the traditional "interface fixes" employed for Li and Na metal anodes, such as various artificial SEIs, surface membranes, barrier layers, the secondary separators, etc. have not been attempted or optimized for the case of K. This is an important area for further exploration, with an understanding that success may come harder than with Li due to K-based SEI reactivity with both ether and ester solvents. The second critical problem with K metal anodes is that they do not thermally or electrochemically wet a standard (untreated) Cu foil current collector. Published experimental and modeling research directly highlights the weak bonding between the K atoms and a Cu surface. Existing surface treatment approaches that achieve improved K wetting are discussed, along with the general design rules for future studies. Also discussed are geometry-based methods to tune nucleation, as well dual approaches where nucleation and SEI structure are tuned through complementary schemes to achieve extended half-cell and full battery stability. We hypothesize that K metal never achieves a planar wetting morphology even at cycle one making the dendrites "baked-in". We propose that classical thin films growth models, Frank van der Merwe (F-M), Volmer Weber (V-W), and Stranski-Krastanov (S-K) can be employed to describe early stage plating behavior. It is demonstrated that island-like V-W growth is the applicable description for the natural plating behavior of K on pristine Cu. Moving forward, there are three inter-related thrusts to be pursued: First, K salt - based electrolyte formulations have to mature and become further tailored to handle the increased reactivity of a metal rather than an ion anode. Second, the K-based SEI structure needs to be further understood and ultimately tuned to be less reactive. Third, the energetics of the K metal - current collector interface must be controlled to promote planar wetting/dewetting throughout cycling.

25 ENERGY STORAGE↗
DOE OSTI2025

On the Role of Airborne Ice Nucleating Particles in Primary and Secondary Ice Formation Processes in Convective Midlatitude Clouds

Abstract Formation of ice in mixed-phase clouds may proceed via primary nucleation and secondary ice production (SIP). Primary nucleation involves the presence of ice nucleating particles (INPs), while SIP follows primary nucleation, resulting in ice crystal number concentrations N ice exceeding the number of INPs. The ice formation pathways in young congestus clouds are not well understood nor are the environmental conditions favorable for the onset of SIP. Coincident airborne measurements of INPs and N ice collected during the Secondary Production of Ice in Cumulus Experiment (SPICULE) campaign over the U.S. central Great Plains are reported for young congestus clouds. Number concentrations of INPs and N ice at temperatures between −10° and −20°C were used to categorize whether SIP was active in each analyzed cloud pass. Observational data suggested that fragmentation of freezing droplets (FFDs) was occurring and the most likely SIP mechanism for ice enhancement during the early stages of the sampled clouds, where higher cloud-base temperatures and stronger updrafts produced conditions favorable for the onset of FFD. Simple model simulations of a congestus cloud were used to compare predictions of N ice from newly implemented SIP mechanisms (including FFD) alongside those from the existing Hallett–Mossop (HM) mechanism. Although predicted N ice , when all SIP mechanisms were active, was in good agreement with observations, the dominant SIP mechanism in the model was predicted to be HM. The rate of heterogeneous freezing in raindrops was likely inhibiting realistic FFD rates in the simulated cloud. These discrepancies between the observations and simulations underscore the need for extended laboratory studies to formulate improved model representations of SIP in convective clouds.

Patnaude, Ryan J. [Department of Atmospheric Scien↗
DOE OSTI2023

Synthesis of PHI-type zeolite harmotome using barium as an inorganic structure-directing agent inspired from natural mineral compositions

Zeolites are nanoporous aluminosilicates widely used as commercial adsorbents, heterogeneous catalysts, and ion-exchange materials due to their unique porosity, acidity, and thermal stability. The vast majority of synthetically-realized zeolite structures are prepared under hydrothermal conditions in alkaline media, and often in the presence of an organic structure-directing agent that facilitates the crystallization of diverse porous networks. Due to economic and environmental disadvantages of organic-based syntheses, it is often desirable to produce zeolites in organic-free media using alkali metal ions as the most commonly employed inorganic structure-directing agents (ISDAs). Here, in this study, we were inspired by the elemental compositions of natural zeolite minerals to examine the use of an alkaline earth metal ion as the ISDA to prepare zeolites with the PHI framework type. Two natural minerals exhibiting this crystal structure are phillipsite and harmotome. Both structures contain sodium and potassium as extra-framework cations, but only harmotome contains barium cations. Here we examined how the combination of alkali and alkaline earth ISDAs promote the formation of PHI-type zeolites. Our findings reveal that each isostructure is prepared under different synthesis conditions where simply adding barium to a growth mixture does not always lead to harmotome formation. Harmotome is formed in more dilute and alkaline growth media; however, time-resolved analyses of zeolite crystallization reveal that harmotome can be synthesized at low temperatures (ca. 65 °C) with rates that are 5-times faster than syntheses of phillipsite. This seemingly indicates that barium reduces the energetic barrier for PHI-type zeolite nucleation in ways that are not fully understood. Moreover, harmotome crystals exhibit an average particle size of ca. 60 nm, which is nearly 40-fold smaller than phillipsite crystals prepared under similar conditions. Collectively, these findings identify routes to control crystallization of PHI-type zeolites and may provide a broader strategy for using the composition of natural zeolite minerals to optimize the preparation of synthetic analogues.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic, Adaptive, Systems and Materials: Complex, Simple and Emergent Behaviors

This program has been funded by DoE/BES for twenty years. It has moved into and out of various subjects as it has developed, but it has retained its focus on complexity and complex systems. The project has evolved in the following way: Self-Assembly and Biomimetic Self-Assembly: All self-assembling systems depend upon a minimum of two types of interaction: a repulsion and an attraction. For the familiar molecular systems, attractive interactions are typically hydrogen bonds and electrostatic interactions. Repulsive interactions include steric effects, hydrophobic effects (in biological systems), and charge-charge repulsion. We have expanded this repertoire to include surface interactions, magnetic interactions, and others. I list these systems in the order in which we have explored them: i) A key emphasis in current work is in understanding how the movement of ions in a magnetic field (the Lorentz effect) interacts with catalytic systems. We have demonstrated that an acceleration in rate of reduction of CO 2 to CO can be accomplished by applying an external magnetic field. This acceleration is largely due to the application of the Lorentz effect on mass transport at the catalyst’s surface. ii) We have also extensively explored the influence of electrostatics, as exhibited in self-assembling systems, by tribocharging. iii) Another key system involves surface tension effects; examples include interactions between heavy particles floating at a liquid-air interface, and interacting by changes in surface area; interactions of bubbles and bubble rafts, behaviors of bubble trains in microfluidic networks, and behaviors of microorganisms in constraining environments. iv) This work has intentionally de-emphasized biological systems; but it does include some work on protein-ligand interactions and interactions among microorganisms. v) We have also explored applications of some of these effects, these explorations include bubble rafts as diffraction gratings, exploration of the structures that can be obtained by tribocharging and uses of these structures in exploring nucleation and melting of crystals. vi) Although not a major focus of this work, several other topics have emerged and offer opportunities for future work. These include the behavior of bubble trains and bubble rafts in microfluidic systems. A particularly interesting example is the formation of bubble trains that repeat in the alteration of large and small bubbles according to rules we do not presently understand, but are uniquely large-period oscillating systems. These systems offer a new route into understanding the instabilities of the type represented by oscillations. vii) We have also begun exploratory projects on magnetic levitation (especially to determine molecular density), and information storage (in molecules). Magnetic Levitation: Self-assembling and biomimetic systems require both attraction and repulsion. We have used electrostatics (tribocharging), interfacial free-energies (surface tension and related forces) and others. Potential uses include reconfigurable diffraction gratings and liquid lenses; exploration of mechanisms in tribocharging; tunneling in EGaIn junctions; and bubble trains (especially in micro-fluidic systems). Examples of systems representing these topics is included in the following papers: Complexity: Disks rotating at a water-air interface; Benard-Marangoni effects; Vortex-Crystals from spinning magnetic disks (Marangoni effects); EGaIn Electrode to study quantum tunneling; Self-Assembly of electrostatically-charged metallic spheres (electrets); Dynamically reconfigurable lens; Using computational designs of ligands for enzymes; Electrostatic self-assembly by tribocharging; Monodisperse bubble trains in microchannel systems; Inverted dripping faucet; Flames; Printing of micro-organisms to regenerate the “ink” of printing device; Using micro-organisms to move loads (“microoxen”); Motion of bacterial swarms near surfaces; Making monodisperse particles in microfluidic systems; Coding/decoding of information stored in droplet trains in microfluidic networks; Magnetic levitation; and Information storage. i) Tribocharging. The change in focus of this work on electrets from the fundamentals of charging to applications of these materials in studying self-assembly using electrostatic interactions. ii) Bubbles in Microchannels. The realization that systems of bubbles in microchannels represented a major opportunity to study complexity in a very tractable system, and the development of a semi-quantitative theory of this subject. iii) Flames. The growth of “flames” remains an exploratory subject for the research, although their currently relatively little active work involving it ongoing. iv) Systems with Microorganisms. The removal of work in biological systems from this project. Based on work supported in this program, we now have a significant project on the development of microfluidic tools for studying C. elegans (a nematode), but this work was not appropriate for a program focused on complexity, and we developed separate support for it. (It is, however, an example of successful seeding of a new area by BES.) The work on electrets has gone through a period in which a part of the program was the subject of a MURI; the focus of this work was to develop materials that did not charge electrostatically on friction or contact. The MURI is now over, and the work on dynamic self-assembly (supported by BES) is the major focus. “Flames” has also enjoyed synergistic support, in terms of a project supported by DARPA on flame suppression (in the absence of extinguishing agents, using acoustic and electrostatic interactions). This work was helpful in understanding some of the basics of flames, but is entirely distinct from the BES focus in complexity. A growing interest is in the Lorentz effect. The Lorentz effect is the force exerted on charged particles (electrons, ions, charged molecules) when they move through a perpendicular magnetic field. The Lorentz effect is almost ubiquitous in modern technology: examples of applications include electric motors, dynamos, cathode ray tubes, many batteries, and most systems that control electrical currents with magnetic forces. We have begun to explore the Lorentz effect in electrochemical systems and heterogeneous catalytic systems involving charged organic species and inorganic ions. This work is still at an early stage, but initial studies that Lorentz effects can be large when ions move through magnetic fields, or magnetic fields move in the presence of ions.

36 MATERIALS SCIENCE↗