Search NASA⌕ Search

SEARCH · Search NASA

Results for “hybrid control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Magnetospheric multiharmonic instabilities

The paper discusses linear convective growth rates of instabilities of electrostatic multiple electron cyclotron harmonic waves in a plasma consisting of a hot electron component with a loss-cone type of free energy source and a cold electron component of presumably ionospheric origin. When the ratio of cold to hot electron temperature is small, the cold upper hybrid frequency controls the harmonic bands that can be nonconvectively stable. When this ratio increases above a few times 0.01, nonconvective instability disappears simultaneously for each harmonic band, when the density ratio is less than unity. A consistent interpretation of the spatial localization and harmonic frequency bandwidths of the observed waves can be made assuming linear convective saturation, provided that the cold electrons have temperatures considerably in excess of those in the ionosphere.

Ashour-Abdalla, M.↗
NASA NTRS1981

Development report: Automatic System Test and Calibration (ASTAC) equipment

A microcomputer based automatic test system was developed for the daily performance monitoring of wind energy system time domain (WEST) analyzer. The test system consists of a microprocessor based controller and hybrid interface unit which are used for inputing prescribed test signals into all WEST subsystems and for monitoring WEST responses to these signals. Performance is compared to theoretically correct performance levels calculated off line on a large general purpose digital computer. Results are displayed on a cathode ray tube or are available from a line printer. Excessive drift and/or lack of repeatability of the high speed analog sections within WEST is easily detected and the malfunctioning hardware identified using this system.

Thoren, R. J.↗
NASA NTRS1990

A hybrid approach to space power control

Conventional control systems have traditionally been utilized for space-based power designs. However, the use of expert systems is becoming important for NASA applications. Rocketdyne has been pursuing the development of expert systems to aid and enhance control designs of space-based power systems. The need for integrated expert systems is vital for the development of autonomous power systems.

Gholdston, E. W.↗
NASA NTRS2000

Renewable Energy SCADA/Training Using NASA's Advanced Technology Communication Satellite

The lack of electrical energy in the rural communities of developing countries is well known, as is the economic unfeasibility of providing much needed energy to these regions via electric grids. Renewable energy (RE) can provide an economic advantage over conventional forms in meeting some of these energy needs. The use of a Supervisory Control and Data Acquisition (SCADA) arrangement via satellite could enable experts at remote locations to provide technical assistance to local trainees while they acquire a measure of proficiency with a newly installed RE system through hands-on training programs using the same communications link. Upon full mastery of the technologies, indigenous personnel could also employ similar SCADA arrangements to remotely monitor and control their constellation of RE systems. Two separate ACTS technology verification experiments (TVEs) have demonstrated that the portability of the Ultra Small Aperture Terminal (USAT) and the versatility of NASA's Advanced Communications Technology Satellite (ACTS), as well as the advantages of Ka band satellites, can be invaluable in providing energy training via distance education (DE), and for implementing renewable energy system SCADA. What has not been tested is the capabilities of these technologies for a simultaneous implementation of renewable energy DE and SCADA. Such concurrent implementations will be useful for preparing trainees in developing countries for their eventual SCADA operations. The project described in this correspondence is the first effort, to our knowledge, in this specific TVE. The setup for this experiment consists of a one-Watt USAT located at Florida Solar Energy Center (FSEC) connected to two satellite modems tuned to different frequencies to establish two duplex ACTS Ka-band communication channels. A short training program on operation and maintenance of the system will be delivered while simultaneously monitoring and controlling the hybrid using the same satellite communications link. The trainees will include faculty and students from Savannah State University, and staff from FSEC. An interactive internet link will be used to allow faculty from the University of West Indies to participate in the training session.

Kalu, A.↗
NASA NTRS2011

Miniaturized Ka-Band Dual-Channel Radar

Smaller (volume, mass, power) electronics for a Ka-band (36 GHz) radar interferometer were required. To reduce size and achieve better control over RFphase versus temperature, fully hybrid electronics were developed for the RF portion of the radar s two-channel receiver and single-channel transmitter. In this context, fully hybrid means that every active RF device was an open die, and all passives were directly attached to the subcarrier. Attachments were made using wire and ribbon bonding. In this way, every component, even small passives, was selected for the fabrication of the two radar receivers, and the devices were mounted relative to each other in order to make complementary components isothermal and to isolate other components from potential temperature gradients. This is critical for developing receivers that can track each other s phase over temperature, which is a key mission driver for obtaining ocean surface height. Fully hybrid, Ka-band (36 GHz) radar transmitter and dual-channel receiver were developed for spaceborne radar interferometry. The fully hybrid fabrication enables control over every aspect of the component selection, placement, and connection. Since the two receiver channels must track each other to better than 100 millidegrees of RF phase over several minutes, the hardware in the two receivers must be "identical," routed the same (same line lengths), and as isothermal as possible. This level of design freedom is not possible with packaged components, which include many internal passive, unknown internal connection lengths/types, and often a single orientation of inputs and outputs.

Hoffman, James P.↗
NASA NTRS2018

A Novel Multi-Spacecraft Interplanetary Global Trajectory Optimization Transcription

As the frontier of space exploration continues to advance, so does the design complexity of future interplanetary missions. One avenue of this increasing complexity includes a class of designs known as "Distributed Spacecraft Missions"; missions where multiple spacecraft coordinate to perform shared objectives. Current approaches for the global trajectory optimization of these Multi-Vehicle Missions (MVMs) are prone to shortcomings including laborious iterative design, considerable human-in-the-loop effort, treatment of the multi-vehicle problem as multiple separate trajectory optimization subproblems (resulting in suboptimal solutions where the whole is less than the sum of its parts), and poor handling of coordination objectives and constraints. There are only a handful of software platforms in existence capable of fully-automated, rapid, interplanetary mission and systems global optimization including the Parallel Global Multiobjective Optimizer (PaGMO), the Gravity Assisted Low-thrust Local Optimization Program (GALLOP), and the Evolutionary Mission Trajectory Generator (EMTG). However, none of these tools is capable of performing such tasks for MVM designs. The work outlined in this paper lays the groundwork for a technique to begin addressing these shortcomings. We present a fully-automated technique which frames interplanetary MVMs as Multi-Objective, Multi-Agent Hybrid Optimal Control Problems (MOMA HOCP). First, the basic functionality of this technique is validated on the single-vehicle problem of reproducing the Cassini interplanetary cruise.

Interplanetary↗
NASA NTRS2018

A Novel Multi-Spacecraft Interplanetary Global Trajectory Optimization Transcription

As the frontier of space exploration continues to advance, so does the design complexity of future interplanetary missions. One avenue of this increasing complexity includes a class of designs known as ``Distributed Spacecraft Missions"; missions where multiple spacecraft coordinate to perform shared objectives. Current approaches for the global trajectory optimization of these Multi-Vehicle Missions (MVMs) are prone to shortcomings including laborious iterative design, considerable human-in-the-loop effort, treatment of the multi-vehicle problem as multiple separate trajectory optimization subproblems (resulting in suboptimal solutions where the whole is less than the sum of its parts), and poor handling of coordination objectives and constraints. There are only a handful of software platforms in existence capable of fully-automated, rapid, interplanetary mission and systems global optimization including the Parallel Global Multiobjective Optimizer (PaGMO), the Gravity Assisted Low-thrust Local Optimization Program (GALLOP), and the Evolutionary Mission Trajectory Generator (EMTG). However, none of these tools is capable of performing such tasks for MVM designs. The work outlined in this paper lays the groundwork for a technique to begin addressing these shortcomings. We present a fully-automated technique which frames interplanetary MVMs as Multi-Objective, Multi-Agent Hybrid Optimal Control Problems (MOMA HOCP). First, the basic functionality of this technique is validated on the single-vehicle problem of reproducing the Cassini interplanetary cruise.

Napier, Sean W.↗
NASA NTRS2018

The InSAR Scientific Computing Environment 3.0: A Flexible Framework for NISAR Operational and User-Led Science Processing

The InSAR Scientific Computing Environment (ISCE) was first developed under the NASA Advanced Information Systems Technology as a flexible, extensible object-oriented framework for Interferometric Synthetic Aperture Radar (InSAR) processing. The ISCE framework uses Python 3 at the workflow level, controlling modules of compiled code for functional processing, and managing inputs, outputs, and other flow control services. The currently released version, called ISCE 2.1, is distributed to the research community through the Western North America InSAR Consortium under a research license. The ISCE team is working on the next generation of the code in order to prepare for the NASAISRO SAR (NISAR) mission operational processing. Innovations in this code include augmentation or conversion of the custom Python framework elements in ISCE with the Pyre framework, new workflows for interferometric and polarimetric stack processing, a more intuitive and graphically based user interface, and flow control for hybrid computing environments including CPU/GPU clusters, logging and error tracking facilities, and new more efficient computational modules that exploit graphical processor units (GPUs) when available. The ISCE 3.0 framework is designed to work in an operational environment as well as on a single user’s laptop or compute cluster, with services to discover capabilities and scale computations accordingly.

Buckley, Sean M.↗
NASA NTRSDate not supplied

Hybrid-Electric Aero-Propulsion Controls Laboratory: Overview and Capability

A hardware-in-the-loop (HIL) laboratory is developed to investigate control technologies for electrified aircraft propulsion (EAP). The laboratory emulates a propulsion system by reproducing the mechanical shaft interface to the electrical power system in hardware. The experimental electric power system includes supercapacitor energy storage and a dynamically variable electrical load. A novel method of scaling power and inertia is provided in software to accurately reproduce the transient, off-design turbomachinery performance dynamics without including actual turbomachinery. An overview of how the HIL system can accommodate a broad range of EAP architectures, including power extraction and insertion, with capability for transient energy management is described. The real-time system operates in the 100kW power class and is instrumented to emulate turbomachinery – power system interactions. The platform is an agile, flexible laboratory for low-cost, risk-reduction development and testing of propulsion control, operability, and energy management technologies.

Controls↗
NASA NTRSDate not supplied

Hybrid-Electric Aero-Propulsion Controls Laboratory: Overview and Capability

A hardware-in-the-loop (HIL) laboratory is developed to investigate control technologies for electrified aircraft propulsion (EAP). The laboratory emulates a propulsion system by reproducing the mechanical shaft interface to the electrical power system in hardware. The experimental electric power system includes supercapacitor energy storage and a dynamically variable electrical load. A novel method of scaling power and inertia is provided in software to accurately reproduce the transient, off-design turbomachinery performance dynamics without including actual turbomachinery. An overview of how the HIL system can accommodate a broad range of EAP architectures, including power extraction and insertion, with capability for transient energy management is described. The real-time system operates in the 100kW power class and is instrumented to emulate turbomachinery – power system interactions. The platform is an agile, flexible laboratory for low-cost, risk-reduction development and testing of propulsion control, operability, and energy management technologies.

controls↗
NASA NTRS2011

Hybrid architecture active wavefront sensing and control system, and method

According to various embodiments, provided herein is an optical system and method that can be configured to perform image analysis. The optical system can comprise a telescope assembly and one or more hybrid instruments. The one or more hybrid instruments can be configured to receive image data from the telescope assembly and perform a fine guidance operation and a wavefront sensing operation, simultaneously, on the image data received from the telescope assembly.

Feinberg, Lee D.↗
NASA NTRS1972

A hybrid electromechanical solid state switch for ac power control

Bidirectional thyristor coupled to a series of actuator driven electromechanical contacts generates hybrid electromechanical solid state switch for ac power control. Device is useful in power control applications where zero crossover switching is required.

Source record↗
NASA NTRS1997

Control Synthesis for a Class of Hybrid Systems Subject to Configuration-Based Safety Constraints

We examine a class of hybrid systems which we call Composite Hybrid Machines (CHM's) that consists of the concurrent (and partially synchronized) operation of Elementary Hybrid Machines (EHM's). Legal behavior, specified by a set of illegal configurations that the CHM may not enter, is to be achieved by the concurrent operation of the CHM with a suitably designed legal controller. In the present paper we focus on the problem of synthesizing a legal controller, whenever such a controller exists. More specifically, we address the problem of synthesizing the minimally restrictive legal controller. A controller is minimally restrictive if, when composed to operate concurrently with another legal controller, it will never interfere with the operation of the other controller and, therefore, can be composed to operate concurrently with any other controller that may be designed to achieve liveness specifications or optimality requirements without the need to reinvestigate or reverify legality of the composite controller. We confine our attention to a special class of CHM's where system dynamics is rate-limited and legal guards are conjunctions or disjunctions of atomic formulas in the dynamic variables (of the type x less than or equal to x(sub 0), or x greater than or equal to x(sub 0)). We present an algorithm for synthesis of the minimally restrictive legal controller. We demonstrate our approach by synthesizing a minimally restrictive controller for a steam boiler (the verification of which recently received a great deal of attention).

Heymann, Michael↗
NASA NTRS1989

A high-speed GaAs MESFET optical controller

Optical interconnects are being considered for control signal distribution in phased array antennas. A packaged hybrid GaAs optical controller with a 1:16 demultiplexed output that is suitable for this application is described. The controller, which was fabricated using enhancement/depletion mode MESFET technology, operates at demultiplexer-limited input data rates up to 305 Mb/s and requires less than 200 microW optical input power.

Claspy, P. C.↗