SEARCH · Search NASA

Results for “immiscibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2024

A general flame aerosol route to high-entropy nanoceramics

High-entropy ceramics are an emerging class of materials with fascinating characteristics. However, elemental immiscibility and crystal complexity limit the development of a general synthesis strategy, and common methods yield bulk materials. Here, we introduce a transformative non-equilibrium flame aerosol technique for synthesizing high-entropy nanoceramics. This scalable, one-step process enables the production of high-entropy oxide nanoceramics with an unprecedented diversity of crystal structures, including fluorite-phase materials that integrate up to 22 distinct cation elements. The method’s capacity for entropic stabilization and grain refinement significantly improves the thermal stability of these nanostructures. In a representative application, a Pt-(MgCoNiCuZn)O high-entropy single-atom catalyst showed superior activity and long-term stability, maintaining constant CO 2 conversion over 670 h and dramatically outperforming conventional catalysts. Finally, the general approach opens a vast composition and structure space for the creation of high-entropy oxide nanomaterials for application across diverse fields, including catalysis, energy storage, sensing, and thermal management.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Synchrotron experiment and simulation studies of magnesium-steel interface manufactured by impact welding

The effective weight reduction in the automotive industry by the wide adoption of lightweight magnesium (Mg) alloys demands high-quality joint between magnesium alloys and massively-used steels in order to wring the excess weight with strength and safety assurance. However, Mg-steel joint is difficult to achieve because there is no mutual solubility between magnesium and steel and huge disparity in physical properties. An impact-based welding method recently showed successful Mg-steel joining. In this work, the characteristics of Mg-steel interface joined by the impact welding method were investigated. Synchrotron high-energy X-ray computed tomography and diffraction were applied to characterize the microstructure across Mg-steel interface. Results revealed a deposit layer formed at the joint interface where Fe-rich particles spread deep into the Mg matrix. High-resolution 3D morphology of Mg-steel interface demonstrated the trapped pores and cracks inside the deposit layer. Finally, the formation of the deposit layer and the void/cracking evolution were analyzed by using finite element models. These findings provide insights into the immiscible Mg-steel joining process.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Exploring the composition, phase separation and structure of AgFe alloys for magneto-optical applications

Bimetallic alloys with large discrepancies in atomic radii and crystal structure typically yield systems that are highly immiscible, even at high temperatures. The Ag x Fe 1−x binary system has limited solid and liquid solubility and thus phase separated Ag + Fe alloys should result. Furthermore, Ag has interesting plasmonic properties and Fe is a strong ferromagnet, thus magneto-plasmonic nanoparticles/films should result due to their phase separation. We have leveraged a combinatorial sputter deposition to synthesize thin films with a large Ag x Fe 1−x (0.19 < x < 0.84) phase space to correlate the composition and structure to the optical and magnetic properties for both as-deposited and annealed compositions.

Bimetallic alloys↗

DOE OSTI2024

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Microstructure refinement and optimized alloying can improve metallic alloy performance: stable nanocrystalline (NC) alloys with immiscible second phases, e.g., Cu-Ta, are stronger than unstable NC alloys and their coarse-grained (CG) counterparts, but higher melting point matrices are needed. Hypoeutectic, CG Ni-Y-Zr alloys were produced via arc-melting to explore their potential as high-performance materials. Microstructures were studied to determine phases present, local composition and length scales, while heat treatments allowed investigating microstructural stability. Alloys had a stable, hierarchical microstructure with ~250 nm ultrafine eutectic, ~10 µm dendritic arm spacing and ~1 mm grain size. Hardness and uniaxial compression tests revealed that mechanical properties of Ni-0.5Y-1.8Zr (in wt%) were comparable to Inconel 617 despite the small alloying additions, due to its hierarchical microstructure. Here, uniaxial compression at 600 °C showed that ternary alloys outperformed Ni-Zr and Ni-Y binary alloys in flow stress and hardening rates, which indicates that the Ni 17 Y 2 phase was an effective reinforcement for the eutectic, which supplemented the matrix hardening due to increased solubility of Zr. Results suggest that ternary Ni-Y-Zr alloys hold significant promise for high temperature applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Decoupling of strain and temperature effects on microstructural evolution during high shear strain deformation

The interplay between defect generation by shear strain and defect annihilation by local heating is difficult to predict in shear-assisted processing techniques. In this study, we decoupled the effects of high shear strain and external heating in an immiscible Cu-Nb alloy using a pin-on-disk tribometer to mimic the microstructural evolution of material during solid-phase processing. The change in sub-surface deformation, strain distribution, and redistribution of the second phase as a function of temperature were examined using transmission electron microscopy and atom probe tomography. Zener-Hollomon parameter is used to semi-quantify the deformation of Cu-Nb alloys as a function of strain and temperature.

36 MATERIALS SCIENCE↗

DOE OSTI2021

In-situ TEM observation of shear induced microstructure evolution in Cu-Nb alloy

Phase boundaries in multiphase alloys govern defect interaction and chemical intermixing across different phases during plastic deformation. Dynamic interaction of defects with phase boundaries in multiphase alloys, especially for immiscible alloys, has been topic of significant research interest in recent years. In this work, we describe a novel approach for carrying out in-situ TEM shear deformation to directly observe interfacial microstructural evolution of a Cu-Nb alloy. A unique double shear specimen geometry is microfabricated by a focused ion beam technique to apply shear deformation upon push loading inside the TEM. From the real-time observation, we discover that the phase boundary with a zigzag morphology effectively blocks stacking faults nucleated in a Cu grain from slipping into a Nb grain. Meanwhile, the Cu phase bears the most plastic deformation through slip or twinning mechanisms. This work sheds light on understanding the shear deformation and the behavior of phase boundaries in multiphase alloys during shear deformation.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing

Solid phase processing by introducing shear deformation into materials can result in unique microstructure evolution and enhanced mechanical properties, especially for immiscible systems such as Cu/Nb. To better understand the correlation between microstructure and deformation behavior during shear, a dedicated testing design of stress localization at predicted sites is necessary. In this study, a specialized S-shaped specimen geometry is implemented to apply localized simple-shear loading in pure-Cu and Cu/Nb accumulative roll-bonded nanolaminates. The nanoscale microstructure and proximity of interfaces in Cu/Nb offer a ~2.8-fold increase in shear stresses than pure-Cu. In pure-Cu, the plastic instability causes shear banding and an in-plane lattice rotation. In Cu/Nb, a partial bending of the interfaces occurred, resulting in a localized lattice rotation. The adapted geometry for micro-scale specimens thus successfully captures the shear deformation at predicted sites in two distinct material systems and could potentially be a powerful technique to study the deformation mechanisms.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Solid solutions limited by grain-boundary solute clustering in ultrafine-grained alloys

Immiscible Ag-Cu alloys exhibit complex behavior due to varying Cu solid solubilities reported under equilibrium and metastable conditions. In ultrafine-grained alloys, these limits are further complicated by a high fraction of grain boundaries, where solute atoms tend to segregate and, in some cases, form clusters. Here, this study investigates the influence of Cu solute segregation and clustering on solid-solution limits in ultrafine-grained Ag-Cu alloys synthesized by magnetron sputtering with varying Cu content. X-ray diffraction peak shifts reveal a solid-solution concentration plateau for Cu contents from 4.9 to 11.7 at %, in contrast to the peak shifts predicted by density-functional theory for Ag-Cu alloys. Scanning transmission electron microscopy further reveals limited solid solubility and the formation of numerous Cu-rich clusters at grain boundaries. Atomistic simulations demonstrate that such limited solubility does not arise from grain boundary segregation alone, but only when strong solute-solute interactions promote the formation of grain-boundary Cu solute clusters.

Density-functional theory↗

DOE OSTI2024

Emergent Properties from Three-Dimensional Assemblies of (Nano)particles in Confined Spaces

The assembly of (nano)particles into compact hierarchical structures yields emergent properties not found in the individual constituents. The formation of these structures relies on a profound knowledge of the nanoscale interactions between (nano)particles, which are often designed by researchers aided by computational studies. These interactions have an effect when the (nano)particles are brought into close proximity, yet relying only on diffusion to reach these closer distances may be inefficient. Recently, physical confinement has emerged as an efficient methodology to increase the volume fraction of (nano)particles, rapidly accelerating the time scale of assembly. Specifically, the high surface area of droplets of one immiscible fluid into another facilitates the controlled removal of the dispersed phase, resulting in spherical, often ordered, (nano)particle assemblies. In this review, we discuss the design strategies, computational approaches, and assembly methods for (nano)particles in confined spaces and the emergent properties therein, such as trigger-directed assembly, lasing behavior, and structural photonic color. Finally, we provide a brief outlook on the current challenges, both experimental and computational, and farther afield application possibilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Improving Thermal Stability of Perovskite Solar Cells by Suppressing Ion Migration Using Copolymer Grain Encapsulation

Thermal stability of organic–inorganic hybrid perovskites (OIHPs) remains as one of the critical challenges against the stable operation of perovskite solar cells (PSCs) in direct sunlight with elevated temperatures. Here, we show that the addition of a polystyrene-co-polyacrylonitrile (SAN) copolymer can significantly enhance thermal stability of OIHPs and improve the stability of the corresponding PSCs by suppressing the migration of organic cations in OHIP. The methylammonium lead iodide (MAPI) with SAN incorporated within the perovskite layer featured a superior thermal stability compared to pure MAPI without SAN, only displaying an average of 5–15% decrease in PCE even after continuous thermal aging for 24 h at 100 °C. The secondary ion mass spectrometry revealed that the thermal degradation of the pure MAPI was largely associated with MA+ out-migration. Conducting atomic force microscopy analysis further indicated that the incorporated SAN led to a suppression of ionic currents present at the grain boundaries of the perovskite film, which was understood by high immiscibility between SAN and MA+ components as confirmed by the experimentally estimated Flory–Huggins parameter between them. This study newly identifies a potential of using polymer grain encapsulation for enhancing thermal stability of OIHPs and their solar cell performance by suppressing the out-diffusion of cationic organic components.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Dissolving Nonionic Surfactants in CO 2 to Improve Oil Recovery in Unconventional Reservoirs via Wettability Alteration

CO 2 injection is a promising method for enhanced oil recovery (EOR) in unconventional shale reservoirs. Here, in this work, we postulate that CO 2 EOR may be improved by the dissolution of surfactants into CO 2 . Although CO 2 is a relatively good solvent for oil, we show that CO 2 and Eagle Ford oil are immiscible at compositions above 70 wt % CO 2 , even at pressures as high as 62 MPa. The presence of a CO 2 –oil interface at reservoir conditions indicates that the addition of a surfactant has the potential to improve oil recovery–via wettability alteration from oil-wet to CO 2 -wet, CO 2 –oil interfacial tension (IFT) reduction, or both. Three nonionic surfactants (branched tridecyl ethoxylate Indorama SURFONIC TDA-9, branched nonylphenol ethoxylate Indorama SURFONIC N-100, and linear dodecyl ethoxylate Indorama SURFONIC L12-6) were evaluated for CO 2 -solubility, shale wettability alteration, effect on CO 2 –oil IFT, ability to generate CO 2 –oil foams, and ability to increase oil extraction from Eagle Ford, Mancos, and Bakken shale cores. Each surfactant dissolved in CO 2 up to 1 wt % at pressures and temperatures commensurate with CO 2 EOR. CO 2 -dissolved surfactants did not significantly affect CO 2 –oil IFT or generate CO2–oil foams, but they did induce a dramatic change in the contact angle of an oil droplet on an oil-aged shale chip in CO 2 from strongly oil-wet (11°) toward intermediate CO 2 –oil wettability (82°) (at 80 °C, 27.6 MPa). The branched tridecyl ethoxylated surfactant, SURFONIC TDA-9, afforded the highest oil recovery in core soaking experiments–75%, compared to 71% by pure CO 2 . Analysis of oil extracts by gas chromatography revealed that heavier oil components were produced when the surfactant was added to CO 2 . These results indicate that CO 2 -dissolved surfactants may increase oil recovery from shale by wettability alteration from oil-wet toward CO 2 -wet.

04 OIL SHALES AND TAR SANDS↗

DOE OSTI2024

Liquid–Liquid Equilibrium Prediction in Fast Pyrolysis Bio-Oil Systems: A Framework for Incorporating Bio-Oil Complexity

The study of mixtures of bio-oil, water and organic solvents in different proportions can serve as a cost-effective analysis of its content due to the formation of immiscible phases. This manuscript attempts to replicate experimentally determined partition coefficients (K OW ) of relevant species present in fast pyrolysis bio-oil (FPBO). A commercial flowsheeting simulator with surrogate bio-oil model representation is used. Concurrently, pyrolytic lignins in FPBO (‘pyrolignin’) do not have an agreed-upon structural representation, and the literature is ripe with wide variations of said representations. Thus, during the description of FPBO, this pyrolignin fraction was modeled using 20 possible structures (phenolic dimers to tetramers), with the goal of determining the structures for which the experimental data are best described. Two cases were considered: Case 1 normalized the reported experimental mass balance, while Case 2 included the unreported fraction in the mass balance to the total pyroligin. Please, add here a comment on the prediction of the Water oil equilibrium. The best KOW predictions for levoglucosan (LVG) were obtained when the system was modeled with no pyrolignin, presenting an MRE under 10% for both systems WO and BO. Among the possible structures, D2 (dimer), F1 (trimer) and I1, and I3 (tetramers) presented MRE ≤ 13% for both cases.

09 BIOMASS FUELS↗

DOE OSTI2021

The Role of Phase Separation on Rayleigh-Plateau Type Instabilities in Alloys

Classical molecular dynamics (MD) simulations are used to investigate the role of phase separation (PS) on the Rayleigh-Plateau (RP) instability. Ni–Ag bulk structures are created at temperatures (2000 K and 1400 K) that generate different PS length scales, λ PS , relative to the RP instability length scale, λRP. Rectanguloids are then cut from the bulk structures and patterned with a perturbation of certain amplitude and wavelength, λ RP . It is found that when λ PS << λ RP (2000 K), the patterned rectanguloids break up into nanoparticles in a manner consistent with classical RP theory, whereas when λ PS << λ RP (1400 K), soluto-capillarity affects the RP instability significantly. Specifically, since Ag has a lower surface energy than Ni, Ag migrates to cover neighboring Ni regions, therefore modifying the RP instability. Thus, we demonstrate that the phase separation length scale of an immiscible alloy can be exploited to direct the assembly of functional bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Irradiation-enhanced Interactions at UO 2 /Al 2 O 3 /Al Interfaces

Combustion synthesis is used to prepare thin UO 2 films on aluminum alloy substrates. This simple preparation method involves electrospraying uranyl nitrate + acetylacetone + 2-methoxyethanol solution on the substrate, followed by a short annealing at 350 or 550 °C. The irradiation of films with a 40 Ar 2+ ion beam (energy of 1.7 MeV and fluences of 7.7 × 10 16 and 1.3 × 10 17 ions/cm 2 ) is conducted to investigate irradiation-induced restructuring processes. High-resolution transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) investigations show that the annealing temperature significantly influences the crystallinity and stability of materials during irradiation. A small amount of Mg in the alloy substrate diffuses into the amorphous Al 2 O 3 interfacial layer between the film and the substrate. Local thermal spikes from the incoming ions facilitate the irradiation-induced mixing of immiscible Al 2 O 3 and UO 2 for the materials prepared at 350 °C. This mass diffusion produces relatively large cavities at the interface. Selective diffusion of a more significant amount of Mg for the materials prepared at 550 °C suppresses the mixing of the Al 2 O 3 interlayer with the film but forms Mg y U 1–y O 2±x solid solutions during irradiation. Local thermal heating triggers the precipitation of a discontinuous crystalline MgO layer close to the film surface. As a result, the enhanced and selective diffusion of Mg into the film makes the materials prepared at 550 °C more robust and mechanically stable than those prepared at 350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Continuous Liquid–Liquid Extraction and in-Situ Membrane Separation of Miscible Liquid Mixtures

Separation operations are critical across a wide variety of manufacturing industries and account for about one quarter of all in-plant energy consumption in the United States. Conventional liquid-liquid separation operations require either thermal or chemical treatment, both of which have a large environmental impact and carbon footprint. Consequently, there is a great need to develop sustainable, clean methodologies for separation of miscible liquid mixtures. The greatest opportunities to achieve this lie in replacing high-energy separation operations (e.g., distillation) with low-energy alternatives such as liquid-liquid extraction. One of the primary design challenges in liquid-liquid extraction is to maximize the interfacial area between two immiscible (e.g., polar and non-polar) liquids for efficient mass transfer. However, this often involves energy-intensive methods including ultrasonication, pumping the feed and the extractant through packed columns with high tortuosity, or using a supercritical fluid as an extractant. Emulsifying the feed and the extractant, especially with a surfactant, offers a large interfacial area, but subsequent separation of emulsions can be energy-intensive and expensive. Thus, emulsions are typically avoided in conventional extraction operations. Herein, we discuss a novel, easily scalable, platform separation methodology termed CLEANS (Continuous Liquid-liquid Extraction And iN-situ membrane Separation). CLEANS integrates emulsion-enhanced extraction with continuous, gravity-driven, membrane-based separation of emulsions into a single unit operation. Furthermore, our results demonstrate that the addition of a surfactant and emulsification significantly enhance extraction (by > 250% in certain cases), even for systems where the best extractants for miscible liquid mixtures are known. Utilizing the CLEANS methodology, we demonstrate continuous separation of a wide range of miscible liquid mixtures, including soluble organic molecules from oils, alcohols from esters, and even azeotropes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Self-Assembled Vesicles from Mixed Brush Nanoparticles in Solution

The self-assembly of binary polymer-grafted nanoparticles (NPs) in a selective solvent is investigated using coarse-grained simulations. Simulations are performed using theoretically informed Langevin dynamics (TILD), a particle-based method that employs a particle-to-mesh scheme to efficiently calculate the nonbonded interactions. Here, the particles are densely grafted with two immiscible polymers, A and B, that are permanently bound to the NP either at random grafting sites (random-grafted) or with all the A chains on one hemisphere of the NP and all the B chains on the other hemisphere (Janus-grafted). For NPs with random grafting, the polymers phase-separate on the surface of the NP to form Janus-type structures in dilute solution, even though some of the chains have to stretch around the particle to form the Janus structure. When the solvent quality is sufficiently poor for the solvophobic chains, the binary grafted NPs assemble into various structures, including double-walled vesicles. In particular, vesicles are formed when the solvophilic volume fraction is between 0.2 and 0.3, in a similar range to that required for vesicle formation in diblock copolymers in a selective solvent. For mixed-grafted NPs, there is considerable variation in the structure of each individual NP, but nevertheless, these NPs form ordered vesicles, similar to those formed by Janus-grafted NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Electrostatic Interactions Control the Nanostructure of Conjugated Polyelectrolyte–Polymeric Ionic Liquid Blends

Polyelectrolyte complexation offers unique opportunities to compatibilize polymers with very different backbone chemistries and to control the morphology of the resulting blend via electrostatic manipulation. In this study, we demonstrate the ability to formulate homogeneous complexes of a conjugated polyelectrolyte with a polymeric ionic liquid, utilizing the electrostatic attraction among their oppositely charged side chains. Variation of electrostatic parameters, such as counterion concentration or polymer charge fraction, tunes the morphology of these polymer complexes from homogeneously disordered blend to weakly structured microemulsion where the local ordering arises from backbone-immiscibility-induced microphase segregation. Our experimental observations are in qualitative agreement with both field-theoretic simulation and random-phase approximation calculations. Simulated morphology snapshots suggest and experimental evidence also indicates that the microphase-segregated complex likely takes on a cocontinuous microemulsion structure. Our findings show that ionic interactions are an effective pathway to compatibilize polymers at macroscopic length scales while achieving controlled nanostructures in these ionic blends. Such systems have great potential for engineering the nanostructure of polymers to tailor applications such as nanofiltration, catalysis, and energy storage, where local ordering can enhance the physical properties of an otherwise macroscopically homogeneous structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Star Block Copolymers at Homopolymer Interfaces: Conformation and Compatibilization

Star block copolymers (s-BCPs), comprised of multiple linear diblock copolymers joined at a central point, are shown to segregate to the interface between two immiscible homopolymers that are identical to the blocks of the s-BCPs. The s-BCPs undergo a configurational transition at the interface, with different blocks of copolymers being embedded in their respective homopolymers, thereby bridging the interface and promoting adhesion. A series of 4-arm s-BCPs were synthesized with hydrogenated or deuterated polystyrene (PS/dPS) as the core block and poly(2-vinylpyridine) (P2VP) as the corona block, which was directly placed at the interface between the two homopolymers. Neutron reflectivity (NR) was used to determine the concentration profiles of the PS homopolymer, s-BCP core blocks, and P2VP total segments under equilibrium. The investigation varies the molecular weight (MW) and the total number of s-BCPs at the interface. Self-consistent-field theory (SCFT) was also employed to calculate the concentration profiles of the components at the interface, which were in excellent agreement with experimental results. The NR showed that the interfacial width between the homopolymers increased with the increasing number of s-BCPs at the interface up to a saturation limit. Beyond this limit, additional s-BCPs were released into the corona-miscible phase as unimolecular micelles. For a comparable interlayer thickness of s-BCPs at the interface, lower MW s-BCPs generated a broader interface. SCFT analysis suggested that, at the same packing density, the arms of the low MW s-BCPs align more parallel to the interface, while the arms of high MW s-BCPs adopt a more normal orientation, like their linear BCP counterparts. Furthermore, it was also observed that the core blocks, constrained by the junction points, were oriented more parallel and closer to the interface than the corona blocks. The phase behavior of the polymer blends revealed that s-BCP additives can efficiently reduce the domain size, with the low MW yielding smaller domain sizes due to the greater reduction in the interfacial energy and the high MW arresting phase separation due to their higher binding energy and a jamming of the interfacial assemblies. Asymmetric double cantilever beam (ADCB) tests demonstrated that s-BCPs promoted adhesion more efficiently than their linear BCP counterparts due to stronger binding energy per molecule, suggesting a more efficient compatibilizer for polymer upcycling. In conclusion, the results from these studies provide fundamental insights into the assembly of s-BCPs at homopolymer interfaces, the reduction of domain size, and promotion of adhesion, providing a strategy for the use of s-BCPs as stealth surfactants and universal compatibilizers.

interface↗