Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Phase field modeling of crack propagation

Fracture is a fundamental mechanism of materials failure. Propagating cracks can exhibit a rich dynamical behavior controlled by a subtle interplay between microscopic failure processes in the crack tip region and macroscopic elasticity. We review recent approaches to understand crack dynamics using the phase field method. This method, developed originally for phase transformations, has the well-known advantage of avoiding explicit front tracking by making material interfaces spatially diffuse. In a fracture context, this method is able to capture both the short-scale physics of failure and macroscopic linear elasticity within a self-consistent set of equations that can be simulated on experimentally relevant length and time scales. Here, we discuss the relevance of different models, which stem from continuum field descriptions of brittle materials and crystals, to address questions concerning crack path selection and branching instabilities, as well as models that are based on mesoscale concepts for crack tip scale selection. Open questions which may be addressed using phase field models of fracture are summarized.

36 MATERIALS SCIENCE↗

Healing of polymer interfaces: Interfacial dynamics, entanglements, and strength

Self-healing of polymer films often takes place as the molecules diffuse across a damaged region, above their melting temperature. Using molecular dynamics simulations we probe the healing of polymer films and compare the results with those obtained for thermal welding of homopolymer slabs. These two processes differ from each other in their interfacial structure since damage leads to increased polydispersity and more short chains. A polymer sample was cut into two separate films that were then held together in the melt state. The recovery of the damaged film was followed as time elapsed and polymer molecules diffused across the interface. The mass uptake and formation of entanglements, as obtained from primitive path analysis, are extracted and correlated with the interfacial strength obtained from shear simulations. We find that the diffusion across the interface is signifcantly faster in the damaged film compared to welding because of the presence of short chains. Though interfacial entanglements increase more rapidly for the damaged films, a large fraction of these entanglements are near chain ends. As a result, the interfacial strength of the healing film increases more slowly than for welding. For both healing and welding, the interfacial strength saturates as the bulk entanglement density is recovered across the interface. However, the saturation strength of the damaged film is below the bulk strength for the polymer sample. At saturation, cut chains remain near the healing interface. They are less entangled and as a result they mechanically weaken the interface. When the strength of the interface saturates, the number of interfacial entanglements scales with the corresponding bulk entanglement density. Chain stiffness increases the density of entanglements, which increases the strength of the interface. Our results show that a few entanglements across the interface are sufficient to resist interfacial chain pullout and enhance the mechanical strength.

74 ATOMIC AND MOLECULAR PHYSICS↗

Use of the Hugoniot Elastic Limit in Laser Shockwave Experiments to Relate Velocity Measurements

---The Idaho National Laboratory (INL) has been developing a Laser Shock system to characterize interface strength in plate fuel for research reactors around the world [1]. This work is in support of the Unites states High Performance Research Reactor program whose goal is to reduce the risk of proliferation of weapons grade fuel while maintaining reactor performance. The INL has been working with National Research Council Canada (NRC) on this project for the last five years. ---One of the concerns of the project is the difficulty of calibrating and standardizing the laser shock technique. The generation of the stress wave by the laser impinging on the plate surface is complex, with amplitude and shape dependence on numerous factors relating to the temporal and spatial distribution of power in the laser spot, surface treatment, and material properties of the plate. Thus the resulting back-face surface velocity, which is used to measure the time-varying stress field within the plate, is difficult to reproduce across different measurement systems. A technique that can generate or indicate a known shock intensity independent of the generating conditions would be valuable and allow us to directly compare results from different systems. ---A Laser Shock round robin test between the system at NRC and the INL was conducted. The goal of the round robin was to determine if there was any bias between the two systems. During the analysis of the data, it was noted that the Hugoniot Elastic Limit (HEL) was consistent within both system data sets independent of the laser power used. An analytical study under development supports that the HEL in metals could be a robust and simple benchmark to compare stresses generated by different laser shock systems. The HEL is a material property that should be insensitive to differences in the shock laser and surface preparation which enhances the reliability of the resulting HEL velocity measurement. 1. J. M. Lacy, J. A. Smith and B. H. Rabin, "Developing a Laser Shockwave Model for Characterizing Diffusion Bonded Interfaces," The 41st Annual Review of Progress in Quantitative Nondestructive Evaluation," Boise, ID, U.S.A., July 2014.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanism of abnormally slow crystal growth of CuZr alloy

Crystal growth of the glass-forming CuZr alloy is shown to be abnormally slow, which suggests a new method to identify the good glass-forming alloys. The crystal growth of elemental Cu, Pd and binary NiAl, CuZr alloys is systematically studied with the aid of molecular dynamics simulations. The temperature dependence of the growth velocity indicates the different growth mechanisms between the elemental and the alloy systems. The high-speed growth featuring the elemental metals is dominated by the non-activated collision between liquid-like atoms and interface, and the low-speed growth for NiAl and CuZr is determined by the diffusion across the interface. We find that, in contrast to Cu, Pd, and NiAl, a strong stress layering arisen from the density and the local order layering forms in front of the liquid-crystal interface of CuZr alloy, which causes a slow diffusion zone. The formation of the slow diffusion zone suppresses the interface moving, resulting in much small growth velocity of CuZr alloy. We provide a direct evidence of this explanation by applying the compressive stress normal to the interface. The compression is shown to boost the stress layering in CuZr significantly, correspondingly enhancing the slow diffusion zone, and eventually slowing down the crystal growth of CuZr alloy immediately. In contrast, the growth of Cu, Pd, and NiAl is increased by the compression because the low diffusion zones in them are never well developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace

Calcium treatment of steel is typically employed to modify alumina inclusions to liquid calcium aluminates. However, injected calcium also reacts with the dissolved sulfur to form calcium sulfide. The current work aims to develop a kinetic model for the evolution of oxide and sulfide inclusions in Al-killed alloyed steel during Ca treatment in the ladle refining process. The model considers dissolution of the calcium from the calcium bubbles into the steel and reduction of calcium oxide in the slag to dissolved calcium. A steel–inclusion kinetic model is used for mass transfer to the inclusion interface and diffusion within the calcium aluminate phases formed on the inclusion. The inclusion–steel kinetic model is then coupled with a previously developed steel–slag kinetic model. The coupled inclusion–steel–slag kinetic model is applied to the chemical composition changes in molten steel, slag, and evolution of inclusions in the ladle. The result of calculations is found to agree well with an industrial heat for species in the steel as well as inclusions during Ca treatment.

36 MATERIALS SCIENCE↗

Multifunctional transitional metal-based phosphide nanoparticles towards improved polysulfide confinement and redox kinetics for highly stable lithium-sulfur batteries

The shuttle effect and the sluggish redox kinetics of lithium polysulfides (LiPSs) are the major issues impeding the practical applications of lithium-sulfur batteries (LSBs). Herein, a highly-efficient Ni 2 P electrocatalyst supported on N, P co-doped graphene (Ni 2 P@NPG) is developed via a simple “recrystallization-self-assembly” method to address the above issues. Here, the ultrafine Ni 2 P nanoparticles ensure abundant adsorption-diffusion-conversion interfaces for accelerating LiPSs transformation and Li 2 S deposition, which extremely decreases the accumulation of LiPSs in the electrolyte and therefore prevents the migration of LiPSs. Their superior catalytic performance is demonstrated by reduced Gibbs free energy changes of rate-limiting step based on the systematic theoretical calculations and the reduced shuttle effect is tested by the three-dimensional reconstructions of Raman depth profiles. Benefiting from these synergistic effects, the LSBs with Ni 2 P@NPG modified separators present a superior cycling performance with an average capacity decay rate of 0.048 % per cycle at 1C around the 400 cycles and a high-rate capacity of 731 mAh/g at 2C. Even with a high-sulfur loading of 3.53 mg cm –2 , the cell can still contain a reversible capacity of 809 mAh/g at 0.2C with a remarkable columbic efficiency of 98.4 %.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulating diffusion processes in discontinuous media: A numerical scheme with constant time steps

In this article, we propose new Monte Carlo techniques for moving a diffusive particle in a discontinuous media. In this framework, we characterize the stochastic process that governs the positions of the particle. The key tool is the reduction of the process to a Skew Brownian motion (SBM). In a zone where the coefficients are locally constant on each side of the discontinuity, the new position of the particle after a constant time step is sampled from the exact distribution of the SBM process at the considered time. To do so, we propose two different but equivalent algorithms: a two-steps simulation with a stop at the discontinuity and a one-step direct simulation of the SBM dynamic. Some benchmark tests illustrate their effectiveness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The electrochemical reactions of SnO 2 with Li and Na: A study using thin films and mesoporous carbons

In this work we have determined the room temperature electrochemical reactivity of SnO 2 thin films and mesoporous carbons filled with SnO 2 anodes with Na, and compare the results with those obtained during the reaction with Li. We show that SnO 2 can reversibly deliver up to 6.2 Li/SnO 2 whereas the reaction with Na is significantly limited. The initial discharge capacity is equivalent to less than 4 Na/SnO 2 , which is expected to correspond to the formation of 2 Na 2 O and Sn. This limited discharge capacity suggests the negative role of the formed Na 2 O matrix upon the reversible reaction of Sn clusters. Moreover, the reversible cycling of less than 1 Na/SnO 2 , despite the utilization of 6-7 nm SnO 2 particles, is indicative of sluggish reaction kinetics. The origin of this significant capacity reduction is likely due to the formation of a diffusion limiting interface. Furthermore, there is a larger apparent hysteresis compared to Li. These results point to the need to design composite structures of SnO 2 nanoparticles with suitable morphological and conductivity components.

36 MATERIALS SCIENCE↗

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗

Depressing effect of 0.1 wt.% Cr addition into Sn-9Zn solder alloy on the intermetallic growth with Cu substrate during isothermal aging

In this paper, the effect of 0.1 wt.% Cr addition into Sn-9Zn lead-free solder alloys on the growth of intermetallic compound (IMC) with Cu substrate during soldering and subsequent isothermal aging was investigated. During soldering, it was found that 0.1 wt.% Cr addition did not contribute to forming the IMC, which was verified as the same phase structure as the IMC for Sn-9Zn/Cu. However, during solid-state isothermal aging, the IMC growth was remarkably depressed by 0.1 wt.% Cr addition in the Sn-9Zn solder, and this effect tended to be more prominent at higher aging temperature. The activation energy for IMC growth was determined as 21.2 kJ mol{sup -1} and 42.9 kJ mol{sup -1} for Sn-9Zn/Cu and Sn-9Zn-Cr/Cu, respectively. The reduced diffusion coefficient was confirmed for the 0.1Cr-containing solder/Cu. Energy-dispersive X-ray mapping and point analysis also showed ZnCr phase existing in solder matrix, which can reduce diffusion rate of Zn atoms.

36 MATERIALS SCIENCE↗

Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds

This work investigates the effects of molybdenum nanoparticles on the growth of interfacial intermetallic compound between Sn-3.8Ag-0.7Cu solder and copper substrate during multiple reflow. Molybdenum nanoparticles were mixed with Sn-3.8Ag-0.7Cu solder paste by manual mixing. Solder samples were reflowed on a copper substrate in a 250 Degree-Sign C reflow oven up to six times. The molybdenum content of the bulk solder was determined by inductive coupled plasma-optical emission spectrometry. It is found that upon the addition of molybdenum nanoparticles to Sn-3.8Ag-0.7Cu solder, the interfacial intermetallic compound thickness and scallop diameter decreases under all reflow conditions. Molybdenum nanoparticles do not appear to dissolve or react with the solder. They tend to adsorb preferentially at the interface between solder and the intermetallic compound scallops. It is suggested that molybdenum nanoparticles impart their influence on the interfacial intermetallic compound as discrete particles. The intact, discrete nanoparticles, by absorbing preferentially at the interface, hinder the diffusion flux of the substrate and thereby suppress the intermetallic compound growth. - Highlights: Black-Right-Pointing-Pointer Mo nanoparticles do not dissolve or react with the SAC solder during reflow. Black-Right-Pointing-Pointer Addition of Mo nanoparticles results smaller IMC thickness and scallop diameter. Black-Right-Pointing-Pointer Mo nanoparticles influence the interfacial IMC through discrete particle effect.

36 MATERIALS SCIENCE↗

The role of C and Mn at the austenite/pearlite reaction front during non-steady-state pearlite growth in a Fe-C-Mn steel

The role of C and Mn during the growth of pearlite under non-steady state conditions is analyzed by comparing the phase compositions of austenite, ferrite and cementite (γ+α+θ) through the use of transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), and atom probe tomography (APT) measurements across the austenite/pearlite interface. Furthermore, a local Mn enrichment and C depletion at the austenite/pearlite interface has been measured, which causes a change in the driving force with time during divergent pearlite growth.

36 MATERIALS SCIENCE↗

Radiation-induced vacancy injection in heterogeneous multiphase materials

Understanding the synergy between corrosion and defect dynamics is a key consideration in the development of advanced materials for extreme environments. Here, we reveal a surprising phenomenon for the transport of point defects induced by irradiation in a heterogeneous multiphase structure of a metal and an oxide, similar to that formed under metal corrosion that takes place in most environments. Despite the confinement of the produced damage within the oxide, vacancies were injected into the unirradiated metal and coarsened with dose. Furthermore, the results show that the nature of the oxide layer dictates the defect evolution in the metal layer. This work reveals an interesting mechanism for point defect interactions in multiphase materials, with broad implications in many fields, while also emphasizing the complex coupling between corrosion and irradiation. Corrosion leads to the formation of multiphase materials, while irradiation enhances diffusion within the heterogeneous phases, which can impact corrosion rates.

36 MATERIALS SCIENCE↗

Controlling Axial p-n Heterojunction Abruptness Through Catalyst Alloying in Vapor-Liquid-Solid Grown Semiconductor Nanowires

The p-n junction can be regarded as the most important electronic structure that is responsible for the ubiquity of semiconductor microelectronics today. Efforts to continually scale down the size of electronic components is guiding research to explore the use of nanomaterials synthesized from a bottom-up approach - group-IV semiconductor nanowires being one such material. However, Au-catalyzed synthesis of Si/Si1-x-Gex semiconductor nanowire heterojunctions using the commonly-used vapor-liquid-solid (VLS) growth technique results in diffuse heterojunction interfaces [1], leading to doubts of producing compositionally-sharp p-n junctions using this approach. However, we have recently reported the ability to increase Ge-Si nanowire heterojunction abruptness by VLS synthesis from a Au(1-x)Ga(x) catalyst alloy as shown by EDX analysis in an SEM [2]. In this work, we have extended the use of a AuGa catalyst alloy to produce more compositionally abrupt p-n junction interfaces compared to using pure Au as directly measured by atom probe tomography. As shown in Figure 1(a-b), individual Ge-Si heterostructured nanowires were grown vertically atop Ge(111) microposts. Direct growth on the microposts provides a facile approach to nanowire analysis which circumvents the need to use FIB-based sample preparation techniques. Both nanowires grown from pure Au and a AuGa catalyst alloy were analyzed. The corresponding 3D APT reconstruction of an individual heterostructured nanowire is shown in Figure 1(c) with the corresponding materials labeled. A 1-dimensional composition profile along the analysis direction in Figure 1(d) confirms an increase in heterojunction abruptness for nanowires grown from AuGa (~10nm) compared to nanowires grown from pure Au (~65nm). Analysis of the P distribution within the Si region (Figure 1(e)) indicates that P reaches a constant distribution over approximately 10nm when incorporated through the AuGa catalyst, whereas it continually increases over 100’s of nanometers when incorporated through pure Au. The apparent lower overall P concentration within the nanowire grown from the AuGa alloy suggests that the solubility of P in the alloy is lower compared to pure Au. The ability to controllably increase nanowire p-n junction abruptness is important for nanowire applications as solar cells and tunneling field effect transistors where an increase in device performance is expected from shaper p-n junction interfaces. [1] T.E. Clark et al., Nano Lett. 8 (2008) 1246. [2] D.E. Perea et al., Nano Lett. 11 (2011) 3117. [3] The research was supported through the user program at both the Center for Integrated Nanotechnologies at Los Alamos National Laboratory and the Environmental Molecular Sciences Laboratory at Pacific Northwest National Laboratory.

Environmental Molecular Sciences Laboratory↗

Structure–Transport Relationships of Water–Organic Solvent Co-transport in Carbon Molecular Sieve (CMS) Membranes

We explore the effects of the carbon molecular sieve (CMS) microstructure on the separation performance and transport mechanism of water–organic mixtures. Specifically, we utilize PIM-1 dense films and integrally skinned asymmetric hollow fiber membranes as polymer precursors for the CMS materials. The PIM-1 membranes were pyrolyzed under several different pyrolysis atmospheres (argon, carbon dioxide, and diluted hydrogen gas) and at multiple pyrolysis temperatures. Detailed gas physisorption measurements reveal that membranes pyrolyzed under 4% H 2 and CO 2 had broadened ultramicropore distributions (pore diameter <7 Å) compared to Ar pyrolysis, and pyrolysis under CO 2 increased ultramicropore volume and broadened micropore distributions at increased pyrolysis temperatures. Gravimetric water and p-xylene sorption and diffusion measurements reveal that the PIM-1-derived CMS materials are more hydrophilic than other CMS materials that have been previously studied, which leads to sorption-diffusion estimations showing water-selective permeation. Water permeation in the vapor phase, pervaporation, and liquid-phase hydraulic permeation reveal that the isobaric permeation modes (vapor permeation and pervaporation) are reasonably well predicted by the sorption-diffusion model, whereas the hydraulic permeation mode is significantly underpredicted (>250×). Conversely, the permeation of p-xylene is well predicted by the sorption-diffusion model in all cases. The collection of pore size analysis, vapor sorption and diffusion, and permeation in different modalities creates a picture of a combined transport mechanism in which water–under high transmembrane pressures–permeates via a Poiseuille-style mechanism, whereas p-xylene solutes in the mixture permeate via sorption-diffusion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospun Conjugated Polymer/Fullerene Hybrid Fibers: Photoactive Blends, Conductivity through Tunneling-AFM, Light Scattering, and Perspective for Their Use in Bulk-Heterojunction Organic Solar Cells

Hybrid conjugated polymer/fullerene filaments based on MEH-PPV/PVP/PCBM were prepared by electrospinning, and their properties were assessed by scanning electron, atomic and lateral-force, tunneling, and confocal microscopies, as well as by attenuated-total-reflection Fourier transform infrared spectroscopy, photoluminescence quantum yield, and spatially resolved fluorescence. Highlighted features include the ribbon shape of the realized fibers and the persistence of a network serving as a template for heterogeneous active layers in solar cell devices. A set of favorable characteristics is evidenced in this way in terms of homogeneous charge-transport behavior and formation of effective interfaces for diffusion and dissociation of photogenerated excitons. The interaction of the organic filaments with light, exhibiting specific light-scattering properties of the nanofibrous mat, might also contribute to spreading incident radiation across the active layers, thus potentially enhancing photovoltaic performance. Finally, this method might be applied to other electron donor–electron acceptor material systems for the fabrication of solar cell devices enhanced by nanofibrillar morphologies embedding conjugated polymers and fullerene compounds.

14 SOLAR ENERGY↗

Entropic Penalty Switches Li + Solvation Site Formation and Transport Mechanisms in Mixed Polarity Copolymer Electrolytes

Emerging solid polymer electrolyte (SPE) designs for efficient Li-ion (Li + ) conduction have relied on polarity and mobility contrast to improve conductivity. To further develop this concept, we employ simulations to examine Li + solvation and transport in poly(oligo ethylene methacrylate) (POEM) and its copolymers with poly(glycerol carbonate methacrylate) (PGCMA). We find that Li + is solvated by ether oxygens instead of the highly polar PGCMA, due to lower entropic penalties. The presence of PGCMA promotes single-chain solvation, thereby suppressing interchain Li + hopping. The conductivity difference between random copolymer PGCMA-r-POEM and block copolymer PGCMA-b-POEM is explained in terms of a hybrid solvation site mechanism. With diffuse microscopic interfaces between domains, PGCMA near the POEM contributes to Li + transport by forming hybrid solvation sites. The formation of such sites is hindered when PGCMA is locally concentrated. These findings help explain how thermodynamic driving forces govern Li + solvation and transport in mixed SPEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗