Search NASA⌕ Search

SEARCH · Search NASA

Results for “large system simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Large eddy simulation of particle dispersion analysis in a pressurized reactive fluid–particle system

Pressurized oxy-combustion (POC) is a promising candidate to reduce carbon emissions in power generation. Designing an effective burner plays a vital role in developing new combustion technologies. Because of high pressure, the volumetric fraction of particles in a pressurized oxy-combustor could be higher than that in the conventional combustor, consequently, the particle dynamics in the pressurized vessel need to be evaluated accordingly. Specifically, the present computational work analyzes the pattern of the particle dispersion by extracting the particle mass flow rate and the particle size distribution in the pressurized combustor. A large eddy simulation (LES) with the environment pressure 15-bar and 100 kWth thermal input of fuel particle has been performed. The particle mass flow rates sampled in several cross-section planes strongly fluctuate, indicating the impacts of the flame as well as the gas-phase flow on the particle movement. Animations of the particle-gas flow show that the flow recirculation plays a major role in producing the pulsing phenomenon of the particle mass flow rate.

Li, Lei↗

Sub-grid drag model for immersed vertical cylinders in fluidized beds

Immersed vertical cylinders are often used as heat exchanger in gas-solid fluidized beds. Computational Fluid Dynamics (CFD) simulations are computationally expensive for large scale systems with bundles of cylinders. Therefore sub-grid models are required to facilitate simulations on a coarse grid, where internal cylinders are treated as a porous medium. The influence of cylinders on the gas-solid flow tends to enhance segregation and affect the gas-solid drag. A correction to gas-solid drag must be modeled using a suitable sub-grid constitutive relationship. In the past, Sarkar et al. have developed a sub-grid drag model for horizontal cylinder arrays based on 2D simulations. However, the effect of a vertical cylinder arrangement was not considered due to computational complexities. In this study, highly resolved 3D simulations with vertical cylinders were performed in small periodic domains. These simulations were filtered to construct a sub-grid drag model which can then be implemented in coarse-grid simulations. Gas-solid drag was filtered for different solids fractions and a significant reduction in drag was identified when compared with simulation without cylinders and simulation with horizontal cylinders. Slip velocities significantly increase when vertical cylinders are present. Lastly, vertical suspension drag due to vertical cylinders is insignificant however substantial horizontal suspension drag is observed which is consistent to the finding for horizontal cylinders.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimization of Thermal Conductance at Interfaces Using Machine Learning Algorithms

We report optimization of thermal transport across the interface of two different materials is critical to micro-/nanoscale electronic, photonic, and phononic devices. Although several examples of compositional intermixing at the interfaces having a positive effect on interfacial thermal conductance (ITC) have been reported, an optimum arrangement has not yet been determined because of the large number of potential atomic configurations and the significant computational cost of evaluation. On the other hand, computation-driven materials design efforts are rising in popularity and importance. Yet, the scalability and transferability of machine learning models remain as challenges in creating a complete pipeline for the simulation and analysis of large molecular systems. In this work we present a scalable Bayesian optimization framework, which leverages dynamic spawning of jobs through the Message Passing Interface (MPI) to run multiple parallel molecular dynamics simulations within a parent MPI job to optimize heat transfer at the silicon and aluminum (Si/Al) interface. We found a maximum of 50% increase in the ITC when introducing a two-layer intermixed region that consists of a higher percentage of Si. Because of the random nature of the intermixing, the magnitude of increase in the ITC varies. We observed that both homogeneity/heterogeneity of the intermixing and the intrinsic stochastic nature of molecular dynamics simulations account for the variance in ITC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Fidelity Simulations of Large-Scale Wireless Networks (Part I)

Wireless systems and networks have experienced rapid growth over the last decade with the advent of smart devices for everyday use. These systems, which include smartphones, vehicular gadgets, and internet-of-things devices, are becoming ubiquitous and ever-more important. They pose interesting research challenges for design and analysis of new network protocols due to their large scale and complexity. In this work, we focus on the challenging aspect of simulating the inter-connectivity of many of these devices in wireless networks. The quantitative study of large scale wireless networks, with counts of wireless devices in the thousands, is a very difficult problem with no known acceptable solution. By necessity, simulations of this scale have to approximate reality, but the algorithms employed in most modern-day network simulators can be improved for wireless network simulations. In this report, we present advances that we have made and propositions for continuation of progress towards a framework for high fidelity simulations of wireless networks. This work is not complete in that a final simulation framework tool is yet to be produced. However, we highlight the major bottlenecks and address them individually with initial results showing enough promise.

42 ENGINEERING↗

Numerical Stiffness based Simulation of Mixed Transmission Systems

Inclusion of power electronics allows increased controllability and stability in power systems. The simulation of such systems on a large-scale is challenging due to the presence of a large number of switches and nonlinear devices. This paper presents an advanced simulation algorithm to solve the aforementioned problem. The algorithm considers separation of differential algebraic equations (DAEs) on the basis of numerical stiffness and applies hybrid discretization algorithms to simulate the DAEs. The DAEs, in this paper, represent the nonlinear nonautonomous switched system dynamics of power systems. Stability analysis is performed on a general class of nonlinear nonautonomous switched systems to show the constraints under which the proposed algorithm is stable. To show the validity of the proposed algorithm, two case studies are considered: single high-voltage direct current (HVdc) substation based on the modular multilevel converter (MMC); and an example three-terminal MMC-HVdc system. Furthermore, relaxation techniques are introduced to create a stable interface for the separated DAEs. The developed algorithms are also validated with PSCAD/EMTDC-detailed reference models.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Enabling Large-Scale Condensed-Phase Hybrid Density Functional Theory Based Ab Initio Molecular Dynamics. 1. Theory, Algorithm, and Performance

By including a fraction of exact exchange (EXX), hybrid functionals reduce the self-interaction error in semilocal density functional theory (DFT) and thereby furnish a more accurate and reliable description of the underlying electronic structure in systems throughout biology, chemistry, physics, and materials science. However, the high computational cost associated with the evaluation of all required EXX quantities has limited the applicability of hybrid DFT in the treatment of large molecules and complex condensed-phase materials. To overcome this limitation, we describe a linear-scaling approach that utilizes a local representation of the occupied orbitals (e.g., maximally localized Wannier functions (MLWFs)) to exploit the sparsity in the real-space evaluation of the quantum mechanical exchange interaction in finite-gap systems. In this work, we present a detailed description of the theoretical and algorithmic advances required to perform MLWF-based ab initio molecular dynamics (AIMD) simulations of large-scale condensed-phase systems of interest at the hybrid DFT level. We focus our theoretical discussion on the integration of this approach into the framework of Car–Parrinello AIMD, and highlight the central role played by the MLWF-product potential (i.e., the solution of Poisson’s equation for each corresponding MLWF-product density) in the evaluation of the EXX energy and wave function forces. We then provide a comprehensive description of the exx algorithm implemented in the open-source Quantum ESPRESSO program, which employs a hybrid MPI/OpenMP parallelization scheme to efficiently utilize the high-performance computing (HPC) resources available on current- and next-generation supercomputer architectures. Furthermore, this is followed by a critical assessment of the accuracy and parallel performance (e.g., strong and weak scaling) of this approach when AIMD simulations of liquid water are performed in the canonical (NVT) ensemble. With access to HPC resources, we demonstrate that exx enables hybrid DFT-based AIMD simulations of condensed-phase systems containing 500–1000 atoms (e.g., (H₂O)₂₅₆) with a wall time cost that is comparable to that of semilocal DFT. In doing so, exx takes us one step closer to routinely performing AIMD simulations of complex and large-scale condensed-phase systems for sufficiently long time scales at the hybrid DFT level of theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bicrystallography-informed Frenkel–Kontorova model for interlayer dislocations in strained 2D heterostructures

In recent years, van der Waals (vdW) heterostructures and homostructures, which consist of stacks of two-dimensional (2D) materials, have risen to prominence due to their association with exotic quantum phenomena originating from correlated electronic states harbored by them. Atomistic scale relaxation effects play an extremely important role in the electronic scale quantum physics of these systems, providing means of manipulation of these materials and allowing them to be tailored for emergent technologies. We investigate such structural relaxation effects in this work using atomistic and mesoscale models, within the context of twisted bilayer graphene — a well-known heterostructure system that features moiré patterns arising from the lattices of the two graphene layers. For small twist angles, atomic relaxation effects in this system are associated with the natural emergence of interface dislocations or strain solitons, which result from the cyclic nature of the generalized stacking fault energy (GSFE), that measures the interface energy based on the relative movement of the two layers. Here, in this work, we first demonstrate using atomistic simulations that atomic reconstruction in bilayer graphene under a large twist also results from interface dislocations, although the Burgers vectors of such dislocations are considerably smaller than those observed in small-twist systems. To reveal the translational invariance of the heterointerface responsible for the formation of such dislocations, we derive the translational symmetry of the GSFE of a 2D heterostructure using the notions of coincident site lattices (CSLs) and displacement shift complete lattices (DSCLs). The workhorse for this exercise is a recently developed Smith normal form bicrystallography framework. Next, we construct a bicrystallography-informed and frame-invariant Frenkel–Kontorova model, which can predict the formation of strain solitons in arbitrary 2D heterostructures, and apply it to study a heterostrained, large-twist bilayer graphene system. Our mesoscale model is found to produce results consistent with atomistic simulations. We anticipate that the model will be invaluable in predicting structural relaxation and for providing insights into various heterostructure systems, especially in cases where the fundamental unit cell is large and therefore, atomistic simulations are computationally expensive.

2D heterostructures↗

A Novel Interfacing Technique for Distributed Hybrid Simulations Combining EMT and Transient Stability Models

With steady increase of power electronic devices and nonlinear dynamic loads in large scale AC/DC systems, the traditional hybrid simulation method, which incorporates these components into a single EMT subsystem and hence causes great difficulty for network partitioning and significant deterioration in simulation efficiency. To resolve these issues, a novel distributed hybrid simulation method is proposed in this paper. The key to realize this method is a distinct interfacing technique, which includes: i) a new approach based on the two-level Schur complement to update the interfaces by taking full consideration of the couplings between different EMT subsystems; and ii) a combined interaction protocol to further improve the efficiency while guaranteeing the simulation accuracy. The advantages of the proposed method in terms of both efficiency and accuracy have been verified by using it for the simulation study of an AC/DC hybrid system including a two-terminal VSC-HVDC and nonlinear dynamic loads.

Distributed hybrid simulation↗

Large-scale atomistic simulations of helium-3 bubble growth in complex palladium alloys

Palladium is an attractive material for hydrogen and hydrogen-isotope storage applications due to its properties of large storage density and high diffusion of lattice hydrogen. When considering tritium storage, the material’s structural and mechanical integrity is threatened by both the embrittlement effect of hydrogen and the creation and evolution of additional crystal defects (e.g., dislocations, stacking faults) caused by the formation and growth of helium-3 bubbles. Using recently developed inter-atomic potentials for the palladium-silver-hydrogen system, we perform large-scale atomistic simulations to examine the defect-mediated mechanisms that govern helium bubble growth. Our simulations show the evolution of a distribution of material defects, and we compare the material behavior displayed with expectations from experiment and theory. We also present density functional theory calculations to characterize ideal tensile and shear strengths for these materials, which enable the understanding of how and why our developed potentials either meet or confound these expectations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parallel Multi-cycle LES of an Optical Pent-roof DISI Engine Under Motored Operating Conditions

The use of Large-eddy Simulations (LES) has increased due to their ability to resolve the turbulent fluctuations of engine flows and capture the resulting cycle-to-cycle variability. One drawback of LES, however, is the requirement to run multiple engine cycles to obtain the necessary cycle statistics for full validation. The standard method to obtain the cycles by running a single simulation through many engine cycles sequentially can take a long time to complete. Recently, a new strategy has been proposed by our research group to reduce the amount of time necessary to simulate the many engine cycles by running individual engine cycle simulations in parallel. With modern large computing systems this has the potential to reduce the amount of time necessary for a full set of simulated engine cycles to finish by up to an order of magnitude. In this paper, the Parallel Perturbation Methodology (PPM) is used to simulate up to 35 engine cycles of an optically accessible, pent-roof Directinjection Spark-ignition (DISI) engine at two different motored engine operating conditions, one throttled and one un-throttled. Comparisons are made against corresponding sequential-cycle simulations to verify the similarity of results using either methodology. Mean results from the PPM approach are very similar to sequential-cycle results with less than 0.5% difference in pressure and a magnitude structure index (MSI) of 0.95. Differences in cycle-to-cycle variability (CCV) predictions are larger, but close to the statistical uncertainty in the measurement for the number of cycles simulated. PPM LES results were also compared against experimental data. Mean quantities such as pressure or mean velocities were typically matched to within 5- 10%. Pressure CCVs were under-predicted, mostly due to the lack of any perturbations in the pressure boundary conditions between cycles. Velocity CCVs for the simulations had the same average magnitude as experiments, but the experimental data showed greater spatial variation in the root-mean-square (RMS). Conversely, circular standard deviation results showed greater repeatability of the flow directionality and swirl vortex positioning than the simulations.

I.C. Engines↗

Applied & Computational MathematicsChallenges for the Design and Control of Dynamic Energy Systems

The Energy Independence and Security Act of 2007 (EISA) was passed with the goal 'to move the United States toward greater energy independence and security.' Energy security and independence cannot be achieved unless the United States addresses the issue of energy consumption in the building sector and significantly reduces energy consumption in buildings. Commercial and residential buildings account for approximately 40% of the U.S. energy consumption and emit 50% of CO{sub 2} emissions in the U.S. which is more than twice the total energy consumption of the entire U.S. automobile and light truck fleet. A 50%-80% improvement in building energy efficiency in both new construction and in retrofitting existing buildings could significantly reduce U.S. energy consumption and mitigate climate change. Reaching these aggressive building efficiency goals will not happen without significant Federal investments in areas of computational and mathematical sciences. Applied and computational mathematics are required to enable the development of algorithms and tools to design, control and optimize energy efficient buildings. The challenge has been issued by the U.S. Secretary of Energy, Dr. Steven Chu (emphasis added): 'We need to do more transformational research at DOE including computer design tools for commercial and residential buildings that enable reductions in energy consumption of up to 80 percent with investments that will pay for themselves in less than 10 years.' On July 8-9, 2010 a team of technical experts from industry, government and academia were assembled in Arlington, Virginia to identify the challenges associated with developing and deploying newcomputational methodologies and tools thatwill address building energy efficiency. These experts concluded that investments in fundamental applied and computational mathematics will be required to build enabling technology that can be used to realize the target of 80% reductions in energy consumption. In addition the finding was that there are tools and technologies that can be assembled and deployed in the short term - the next 3-5 years - that can be used to significantly reduce the cost and time effective delivery of moderate energy savings in the U.S. building stock. Simulation tools, which are a core strength of current DOE computational research programs, provide only a part of the answer by providing a basis for simulation enabled design. New investments will be required within a broad dynamics and control research agenda which must focus on dynamics, control, optimization and simulation of multi-scale energy systems during design and operation. U.S. investments in high performance and high productivity computing (HP2C) should be leveraged and coupled with advances in dynamics and control to impact both the existing building stock through retrofits and also new construction. The essential R&D areas requiring investment are: (1) Characterizing the Dynamics of Multi-scale Energy Systems; (2) Control and Optimization Methodologies of Multi-scale Energy Systems Under Uncertainty; and (3) Multiscale Modeling and Simulation Enabled Design and Operation. The concept of using design and control specific computational tools is a new idea for the building industry. The potential payoffs in terms of accelerated design cycle times, performance optimization and optimal supervisory control to obtain and maintain energy savings are huge. Recent advances in computational power, computer science, and mathematical algorithms offer the foundations to address the control problems presented by the complex dynamics of whole building systems. The key areas for focus and associated metrics with targets for establishing competitiveness in energy efficient building design and operation are: (1) Scalability - Current methodology and tools can provide design guidance for very low energy buildings in weeks to months; what is needed is hours to days. A 50X improvement is needed. (2) Installation and commissioning - Current methodology and tools can target a three month window for commissioning of building subsystems; what is needed is one week. A 10X improvement is needed. (3) Quality - Current design tools can achieve 30% accuracy; what is needed to make design decisions is 5% with quantification of uncertainty. A 5X improvement is needed. These challenges cannot be overcome by raw computational power alone and require the development of new algorithms. Here algorithms mean much more than simulating the building physics but need to be inclusive of a much better understanding of the building and the control systems associated with the building and to capture the entire set of dynamics. The algorithmsmust represent computationally new mathematical approaches to modeling, simulation, optimization and control of large multi-scale dynamic systems and bringing these elements to bear on industry in simulation enabled design approaches.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Greening Future Elevates Flash Drought Risk in Northern Mid‐to‐High Latitudes

Flash droughts have become a growing concern, as they can emerge rapidly and increase the risk of crop failure. Although past studies have investigated the meteorological drivers and future changes of flash drought, why flash drought is more frequent over humid and vegetated regions remains underexplored. This study delves further into the mechanism by which vegetation regulates flash drought and its future change using observations from multiple data sets and large ensemble simulations from three Earth system models. On an interannual timescale, both observations and simulations show robust increases in flash drought frequency and a higher flash-to-sub-seasonal drought ratio during spring or antecedent conditions with dense vegetation, supporting the important role of vegetation in flash drought occurrence, especially in the northern mid-to-high latitudes. In the latter regions, the large ensemble simulations show robust increases in flash drought (e.g., 67% and 46% increases in Eastern U.S. and North Asia in 2050–2100 relative to 1950–2000 under the high emission scenario), where the growing season is lengthening. Although greening might suggest reduced drought stress, it drives precipitation-soil moisture-evapotranspiration decoupling by increasing evapotranspiration partitioning to transpiration. As transpiration can access deep soil water through the plant root system, its increased portion can weaken the constraints of concurrent precipitation on evapotranspiration, thus accelerating soil moisture depletion under high evaporative demand, driving a slow-to-rapid drought transition. How vegetation regulates flash drought by regulating surface moisture budget is supported by observations and simulations. Although warming supports early planting, agriculture may increasingly be threatened by surging flash drought risk.

Drought↗

Model Reduction for Compressible Cavity Simulations Towards Uncertainty Quantification of Structural Loading

This report summarizes FY16 progress towards enabling uncertainty quantification for compressible cavity simulations using model order reduction (MOR). The targeted application is the quantification of the captive-carry environment for the design and qualification of nuclear weapons systems. To accurately simulate this scenario, Large Eddy Simulations (LES) require very fine meshes and long run times, which lead to week-long runs even on parallel state-of-the-art super- computers. MOR can reduce substantially the CPU-time requirement for these simulations. We describe two approaches for model order reduction for nonlinear systems, which can yield significant speed-ups when combined with hyper-reduction: the Proper Orthogonal Decomposition (POD)/Galerkin approach and the POD/Least-Squares Petrov Galerkin (LSPG) approach. The implementation of these methods within the in-house compressible flow solver SPARC is discussed. Next, a method for stabilizing and enhancing low-dimensional reduced bases that was developed as a part of this project is detailed. This approach is based on a premise termed "minimal subspace rotation", and has the advantage of yielding ROMs that are more stable and accurate for long-time compressible cavity simulations. Numerical results for some laminar cavity problems aimed at gauging the viability of the proposed model reduction methodologies are presented and discussed.

42 ENGINEERING↗

Reduction of a detailed soot model for simulations of pyrolysing solid fuels

Here, we introduce a computationally inexpensive soot formation model for use in simulating large solid-complex fuel systems. The proposed model evaluates three variables: number density of tars, bulk mass density of soot particles, and particle number density. Each of these variables are influenced by soot formation phenomena, and this model evaluates the most common of these phenomena: soot nucleation, surface reactions, and coagulation. Two separate simulations were carried out using this model and results were compared against simulations using a more detailed and computationally expensive model. Findings are promising and show a meaningful reduction in model complexity and computational cost while still giving comparable results.

58 GEOSCIENCES↗