Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Dressed electrostatic solitary excitations in three component pair-plasmas: Application in isothermal pair-plasma with stationary ions

In this work electrostatic solitary waves in a three component pair-plasma consisting of hot isothermal electrons (or negative fullerene ions), positrons (or positive fullerene ions), and stationary positive ions (say, dust particulates) are studied. Using reductive perturbation method, plasma fluid equations are reduced to a Korteweg-de Vries (KdV) equation. Considering the higher-order nonlinearity, a linear inhomogeneous equation is derived, and the stationary solutions of these coupled equations are achieved by applying the renormalization procedure of Kodama-Taniuti. It is observed that in the linear approximation and applying Fourier analysis, two electrostatic modes, namely, upper or optical and lower or acoustic modes, are present. However, the application of reductive perturbation technique confirms that only acoustic-electrostatic mode can propagate in such plasma as KdV soliton, the amplitude and width of which are studied regarding to plasma parameters {sigma} (positron-to-electron temperature ratio) and {delta} (stationary cold ions-to-electron density ratio). It is also observed that the higher-order nonlinearity leads to deformation of the soliton structure from bell-shaped to W-shaped depending on the variation in values of the plasma parameters {sigma} and {delta}. It is revealed that KdV-type solitary waves cannot propagate in three component pair-plasma when the pair-species temperature is equal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lasing conditions of a free electron laser with helical wiggler

In this investigation the problem of the lasing of a free electron laser with magnetostatic helical wiggler is studied. In the linear approximation, the threshold conditions of the lasing for Raman and Compton regimes under excitation of the forward and backward electromagnetic waves are achieved. In the various physical situations, the variation in the minimum length of the resonator with energy and density of electron beam and with the reflection coefficients of resonator's mirrors is investigated.

43 PARTICLE ACCELERATORS↗

Cohomology Methods in Causal Perturbation Theory

Various problems in perturbation theory of (quantum) gauge models can be rephrased in the language of cohomology theory. This was already noticed in the functional formulation of perturbative gauge theories. Causal perturbation theory is a fully quantum approach: is works only with the chronological products which are defined as operator-valued distributions in the Fock space of the model. The use of causal perturbation theory leads to similar cohomology problems; the main difference with respect to the functional methods comes from the fact that the gauge transformation of the causal approach is, essentially, the linear part of the non-linear BRST transformation.Using these methods it is possible to give a nice determination of the interaction Lagrangians for gauge models (Yang-Mills and gravitation in the linear approximation); one obtains with this method the unicity of the interaction Lagrangian up to trivial terms. The case of quantum gravity is highly non-trivial and can be generalized with this method to the massive graviton case. Going to higher orders of perturbation theory one finds quantum anomalies. Again the cohomological methods can be used to determine the generic form of these anomalies. Finally, one can investigate the arbitrariness of the chronological products in higher orders and reduce this problem to cohomology methods also.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the motion of filaments in a plasma ball

Measurements were made of the motion of the filamentary structures in a plasma ball using high-speed cameras and other optical detectors. These filaments traverse the ball radially at approx10{sup 6} cm/s at the driving frequency of approx26 kHz and drift upward through the ball at approx1 cm/s. The number of filaments and their radial speed increase approximately linearly with the applied voltage above some threshold. A custom plasma ball was constructed to observe the effects of varying gas pressure, gas species, and electrode properties on the filament structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle simulation of femtosecond laser stimulation of electrical discharges in small gaps

A particle-in-cell/Monte Carlo collision simulation study of femtosecond laser stimulation of electrical discharges in submicron gaps between platinum scanning tunneling microscope cathode tips and gold film anodes in atmospheric pressure argon gas is described. The breakdown potential of gaps containing either preloaded electrons or preloaded neutral and ionized platinum atoms and electrons at various densities were compared to the breakdown potential of gaps with background argon gas alone. It was found that gaps preloaded with sufficient densities of either electrons or partially ionized electrode materials broke down at cathode potential of -80 V while gaps with background argon gas alone required applied cathode potentials between -200 to -250 V to cause a breakdown. Also, partially ionized material was much more effective at stimulating breakdown than electrons alone. The density of preloaded partially ionized platinum required to lower breakdown cathode potential to -80 V was approximately 12.5 times smaller than that required for the preloaded electrons alone in the same size gap. Analysis of the mechanism by which the preloaded partially ionized material promoted breakdown showed that laser ablated ions located near the cathode tip increased the local field at the cathode surface and the field-emitted electron flux from the cathode. This higher electron flux ionized background argon gas and preloaded platinum which resulted in gap breakdown. The threshold density of partially ionized platinum for gap breakdown varied approximately linearly with applied cathode potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-time nonlinear correction of back-focal-plane detection in optical tweezers

Photodiode based detection of laser trapped beads using forward scattered light is a frequently employed technique for position measurement. There is a nonlinear relationship between photodiode outputs and bead position but for small displacements linear approximation holds well. Traditionally, the nonlinearity is compensated by normalizing the photodiode's position signal with the intensity signal and then using a polynomial fit in the range where voltage to position mapping is one to one. In this article, this range is extended by using the intensity signal as an independent input along with the two position signals. A map from the input signals to the actual position values is obtained. This mapping is one-to-one for a larger range that results in an increased detection range. An artificial neural network that facilitates implementation is employed for this purpose. This scheme is implemented on a Field Programmable Gate Array based data acquisition and control hardware with closed loop bandwidth of 50 kHz. Detection of the order of 350 nm from the center of detection laser is demonstrated for a 500 nm diameter bead compared to 180 nm achieved by a polynomial fit.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The magnetic Rayleigh-Taylor instability for inviscid and viscous fluids

The Rayleigh-Taylor instability arises whenever two fluids with different densities are arranged such that the heavier fluid sits above the lighter fluid, with a sharp interface in between. The magnetic Rayleigh-Taylor instability has the further complication due to the presence of a magnetic field throughout both media. The two fluids in question may also have differing magnetic properties, such as the magnetic permeability. When the fluids in consideration are in fact plasmas comprised of charged particles, induced currents, magnetic fields, and Lorentz forces can all act in ways that will affect the stability of the system. Stable base flows exist for the 2D case, and small sinusoidal disturbances to the base flow will grow in the unstable scenario. The numerical method described in this paper calculates the growth of the interface in the nonlinear regime, since closed form solutions are obtained only in the linear approximation. Through the analysis of both the fluid and magnetic vorticities and streamfunctions, the simulated results can be explained from the principles of magnetohydrodynamics. A range of simulations is presented, looking at cases with different initial conditions, cases with strong and weak magnetic fields, and cases with magnetic fields oriented at different angles relative to the interface of the two fluids. It is shown in particular how different initial conditions give rise to outcomes that are very different in terms of the geometry of the interface between the two fluids, primarily the differences between a single mode disturbance and a multimode disturbance to the interface at time t = 0.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Threshold conditions for lasing of a free electron laser oscillator with longitudinal electrostatic wiggler

The system of the nonlinear non-stationary equations describing spatial-temporal dynamics of the amplitudes of an ondulator radiation and a space-charge wave of a relativistic electron beam in the resonator is obtained. A free electron laser resonator with longitudinal electrostatic wiggler is considered. In the linear approximation, the threshold conditions of lasing for Raman and Compton regimes under excitation of forward and backward electromagnetic wave are achieved. In the various physical situations, the variation of the minimum length of the resonator with the amplitude of wiggler, density of electron beam, and with the reflection coefficients of resonator's mirrors is investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Size Dependence of Two-Photon Absorption in Semiconductor Quantum Dots

Quantum confinement plays an important role in the optical properties of semiconductor quantum dots (QDs). In this work, we combine experiment and modeling to systematically investigate the size dependence of the degenerate two-photon absorption (TPA) of below-band-gap radiation in CdSe QDs. The TPA coefficient β at 800 nm of CdSe QDs of varying radii was measured using femtosecond white-light transient absorption spectroscopy by probing the pump-induced bleaching at the first exciton transition energy. β was also calculated using a model based on the multiband effective-mass approximation. Satisfactory agreement between experiment and theory was obtained. Our findings show the evolution of the TPA in the QDs from that of atom-like to bulk-like with increasing the radius R. The TPA coefficient (or the volume normalized TPA cross-section) increases with radius approximately linearly in the strong confinement regime due to the rapid increase of the joint density of states for the two-photon allowed transitions, and saturates for R > 5 nm (the exciton Bohr radius), approaching that of bulk CdSe.

Dakovski, Georgi L.↗

Ion irradiation synthesis of Ag–Au bimetallic nanospheroids in SiO{sub 2} glass substrate with tunable surface plasmon resonance frequency

Ag–Au bimetallic nanospheroids with tunable localized surface plasmon resonance (LSPR) were synthesized by 100 keV Ar–ion irradiation of 30 nm Ag–Au bimetallic films deposited on SiO{sub 2} glass substrates. A shift of the LSPR peaks toward shorter wavelengths was observed up to an irradiation fluence of 1.0 × 10{sup 17} cm{sup −2}, and then shifted toward the longer wavelength because of the increase of fragment volume under ion irradiation. Further control of LSPR frequency over a wider range was realized by modifying the chemical components. The resulting LSPR frequencies lie between that of the pure components, and an approximate linear shift of the LSPR toward the longer wavelength with the Au concentration was achieved, which is in good agreement with the theoretical calculations based on Gans theory. In addition, the surface morphology and compositions were examined with a scanning electron microscope equipped with an energy dispersive spectrometer, and microstructural characterizations were performed using a transmission electron microscope. The formation of isolated photosensitive Ag–Au nanospheroids with a FCC structure partially embedded in the SiO{sub 2} substrate was confirmed, which has a potential application in solid-state devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Origin of parameter degeneracy and molecular shape relationships in geometric-flow calculations of solvation free energies

Implicit solvent models are important tools for calculating solvation free energies for chemical and biophysical studies since they require fewer computational resources but can achieve accuracy comparable to that of explicit-solvent models. In past papers, geometric flow-based solvation models have been established for solvation analysis of small and large compounds. In the present work, the use of realistic experiment-based parameter choices for the geometric flow models is studied. We find that the experimental parameters of solvent internal pressure p = 172 MPa and surface tension γ = 72 mN/m produce solvation free energies within 1 RT of the global minimum root-mean-squared deviation from experimental data over the expanded set. Our results demonstrate that experimental values can be used for geometric flow solvent model parameters, thus eliminating the need for additional parameterization. We also examine the correlations between optimal values of p and γ which are strongly anti-correlated. Geometric analysis of the small molecule test set shows that these results are inter-connected with an approximately linear relationship between area and volume in the range of molecular sizes spanned by the data set. In spite of this considerable degeneracy between the surface tension and pressure terms in the model, both terms are important for the broader applicability of the model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ablation experiment and threshold calculation of titanium alloy irradiated by ultra-fast pulse laser

The interaction between an ultra-fast pulse laser and a material's surface has become a research hotspot in recent years. Micromachining of titanium alloy with an ultra-fast pulse laser is a very important research direction, and it has very important theoretical significance and application value in investigating the ablation threshold of titanium alloy irradiated by ultra-fast pulse lasers. Irradiated by a picosecond pulse laser with wavelengths of 1064 nm and 532 nm, the surface morphology and feature sizes, including ablation crater width (i.e. diameter), ablation depth, ablation area, ablation volume, single pulse ablation rate, and so forth, of the titanium alloy were studied, and their ablation distributions were obtained. The experimental results show that titanium alloy irradiated by a picosecond pulse infrared laser with a 1064 nm wavelength has better ablation morphology than that of the green picosecond pulse laser with a 532 nm wavelength. The feature sizes are approximately linearly dependent on the laser pulse energy density at low energy density and the monotonic increase in laser pulse energy density. With the increase in energy density, the ablation feature sizes are increased. The rate of increase in the feature sizes slows down gradually once the energy density reaches a certain value, and gradually saturated trends occur at a relatively high energy density. Based on the linear relation between the laser pulse energy density and the crater area of the titanium alloy surface, and the Gaussian distribution of the laser intensity on the cross section, the ablation threshold of titanium alloy irradiated by an ultra-fast pulse laser was calculated to be about 0.109 J/cm{sup 2}.

36 MATERIALS SCIENCE↗

The electronic structure, mechanical and thermodynamic properties of Mo{sub 2}XB{sub 2} and MoX{sub 2}B{sub 4} (X = Fe, Co, Ni) ternary borides

The mechanical properties, electronic structure and thermodynamic properties of the Mo{sub 2}XB{sub 2} and MoX{sub 2}B{sub 4} (X = Fe, Co, Ni) ternary borides were calculated by first-principles methods. The elastic constants show that these ternary borides are mechanically stable. Formation enthalpy of Mo{sub 2}XB{sub 2} and MoX{sub 2}B{sub 4} (X = Fe, Co, Ni) ternary borides are at the range of −118.09 kJ/mol to −40.14 kJ/mol. The electronic structures and chemical bonding characteristics are analyzed by the density of states. Mo{sub 2}FeB{sub 2} has the largest shear and Young's modulus because of its strong chemical bonding, and the values are 204.3 GPa and 500.3 GPa, respectively. MoCo{sub 2}B{sub 4} shows the lowest degree of anisotropy due to the lack of strong direction in the bonding. The Debye temperature of MoFe{sub 2}B{sub 4} is the largest among the six phases, which means that MoFe{sub 2}B{sub 4} possesses the best thermal conductivity. Enthalpy shows an approximately linear function of the temperature above 300 K. The entropy of these compounds increase rapidly when the temperature is below 450 K. The Gibbs free energy decreases with the increase in temperature. MoCo{sub 2}B{sub 4} has the lowest Gibbs free energy, which indicates the strongest formation ability in Mo{sub 2}XB{sub 2} and MoX{sub 2}B{sub 4} (X = Fe, Co, Ni) ternary borides.

36 MATERIALS SCIENCE↗

Nonlinear aspects of acoustic radiation force in biomedical applications

In the past decade acoustic radiation force (ARF) became a powerful tool in numerous biomedical applications. ARF from a focused ultrasound beam acts as a virtual “finger” for remote probing of internal anatomical structures and obtaining diagnostic information. This presentation deals with generation of shear waves by nonlinear focused beams. Albeit the ARF has intrinsically nonlinear origin, in most cases the primary ultrasonic wave was considered in the linear approximation. In this presentation, we consider the effects of nonlinearly distorted beams on generation of shear waves by such beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Temperature and compression effects on electron heat capacity and electron-phonon coupling in aluminum and beryllium: Insights from ab initio simulations

Ultrafast laser experiments on metals usually induce a high electron temperature and a low ion temperature and, thus, an energy relaxation process. The electron heat capacity and electron-phonon coupling factor are crucial thermal quantities to describe this process. We perform ab initio theoretical studies to determine these thermal quantities and their dependence on density and electron temperature for the metals aluminum and beryllium. The heat capacity shows an approximately linear dependence on the temperature, similar to free electron gas, and the compression only slightly affects the capacity. The electron-phonon coupling factor increases with both temperature and density, and the change observed for beryllium is more obvious than that for aluminum. The connections between thermal quantities and electronic/atomic structures are discussed in detail, and the different behaviors of aluminum and beryllium are well explained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Frequency dependence of the maximum operating temperature for quantum-cascade lasers up to 5.4 THz

We report on the observation of an approximately linear reduction in the maximum operating temperature with an increasing emission frequency for terahertz quantum-cascade lasers between 4.2 and 5.4 THz. These lasers are based on the same design type, but vary in period length and barrier height for the cascade structure. The sample emitting at the highest frequency around 5.4 THz can be operated in pulsed mode up to 56 K. We identify an additional relaxation channel for electrons by longitudinal optical phonon scattering from the upper to the lower laser level and increasing optical losses toward higher frequencies as major processes, leading to the observed temperature behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nuclear reactor transient analysis via a quasi-static kinetics Monte Carlo method

The predictor-corrector quasi-static (PCQS) method is applied to the Monte Carlo (MC) calculation for reactor transient analysis. To solve the transient fixed-source problem of the PCQS method, fission source iteration is used and a linear approximation of fission source distributions during a macro-time step is introduced to provide delayed neutron source. The conventional particle-tracking procedure is modified to solve the transient fixed-source problem via MC calculation. The PCQS method with MC calculation is compared with the direct time-dependent method of characteristics (MOC) on a TWIGL two-group problem for verification of the computer code. Then, the results on a continuous-energy problem are presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Quantitative contrast-enhanced optical coherence tomography

We have developed a model to accurately quantify the signals produced by exogenous scattering agents used for contrast-enhanced Optical Coherence Tomography (OCT). This model predicts distinct concentration-dependent signal trends that arise from the underlying physics of OCT detection. Accordingly, we show that real scattering particles can be described as simplified ideal scatterers with modified scattering intensity and concentration. The relation between OCT signal and particle concentration is approximately linear at concentrations lower than 0.8 particle per imaging voxel. However, at higher concentrations, interference effects cause signal to increase with a square root dependence on the number of particles within a voxel. Finally, high particle concentrations cause enough light attenuation to saturate the detected signal. Predictions were validated by comparison with measured OCT signals from gold nanorods (GNRs) prepared in water at concentrations ranging over five orders of magnitude (50 fM to 5 nM). In addition, we validated that our model accurately predicts the signal responses of GNRs in highly heterogeneous scattering environments including whole blood and living animals. By enabling particle quantification, this work provides a valuable tool for current and future contrast-enhanced in vivo OCT studies. More generally, the model described herein may inform the interpretation of detected signals in modalities that rely on coherence-based detection or are susceptible to interference effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗