Search NASA⌕ Search

SEARCH · Search NASA

Results for “local significance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Bering Strait Ocean Heat Transport Drives Decadal Arctic Variability in a High‐Resolution Climate Model

Abstract We investigate the role of ocean heat transport (OHT) in driving the decadal variability of the Arctic climate by analyzing the pre‐industrial control simulation of a high‐resolution climate model. While the OHT variability at 65°N is greater in the Atlantic, we find that the decadal variability of Arctic‐wide surface temperature and sea ice area is much better correlated with Bering Strait OHT than Atlantic OHT. In particular, decadal Bering Strait OHT variability causes significant changes in local sea ice cover and air‐sea heat fluxes, which are amplified by shortwave feedbacks. These heat flux anomalies are regionally balanced by longwave radiation at the top of the atmosphere, without compensation by atmospheric heat transport (Bjerknes compensation). The sensitivity of the Arctic to changes in OHT may thus rely on an accurate representation of the heat transport through the Bering Strait, which is difficult to resolve in coarse‐resolution ocean models.

54 ENVIRONMENTAL SCIENCES↗

Room-temperature valley-selective emission in Si-MoSe 2 heterostructures enabled by high-quality-factor chiroptical cavities

Transition metal dichalcogenides possess valley pseudospin, enabling coupling between photon spin and electron spin for classical and quantum information processing. However, rapid valley-dephasing processes have impeded the development of scalable, high-performance valleytronic devices operating at room temperature. Here we demonstrate that a chiral resonant metasurface can enable room-temperature valley-selective emission in MoSe 2 monolayers independent of excitation polarization. This platform provides circular eigen-polarization states with a high quality factor (Q-factor) and strong chiral near-field enhancement. The fabricated Si chiral metasurfaces exhibit chiroptical resonances with Q-factors up to 450 at visible wavelengths. We reveal degrees of circular polarization (DOP) reaching a record high of 0.5 at room temperature. Our measurements show that the high DOP can be attributed to the significantly increased chiroptical local density of states, which enhances valley-specific radiative transition rates by a factor of ~13. Our work could facilitate the development of ultracompact chiral classical and quantum light sources.

42 ENGINEERING↗

Safety and efficacy of C. muridarum vaccines adjuvanted with CpG-1826 and four concentrations of Montanide-ISA-720-VG

It is recommended that the adjuvant Montanide ISA 720 VG be used at a concentration of 70% v/v. At this concentration, Montanide causes at the site of immunization a local granuloma that can last for several weeks. To determine the safety and protective efficacy of a Chlamydia muridarum MOMP vaccine, formulated with CpG-1826 and four different concentrations of Montanide (70%, 50%, 30% and 10%), BALB/c (H-2 d ) female mice were immunized twice intramuscularly. Local reactogenicity was significant for vaccines formulated with 70% or 50% Montanide but not for those inoculated with 30% or 10% Montanide. Robust humoral and cell mediated memory immune responses were elicited by the 70%, 50% and 30% Montanide formulations. Mice were challenged intranasally with 10 4 C. muridarum inclusion forming units (IFU). Based on changes in body weight, lungs’s weight and number of IFU recovered, mice vaccinated with the 70%, 50% and 30% Montanide formulations were significantly protected, but not mice receiving 10% Montanide. To conclude, we recommend the 30% Montanide concentration to be tested in humans and animal models to determine its safety and efficacy, in comparison to the 70% Montanide concentration currently used. The 30% Montanide formulation could significantly facilitate licensing of this adjuvant for human use.

60 APPLIED LIFE SCIENCES↗

Unsupervised learning of representative local atomic arrangements in molecular dynamics data

Molecular dynamics (MD) simulations present a data-mining challenge, given that they can generate a considerable amount of data but often rely on limited or biased human interpretation to examine their information content. By not asking the right questions of MD data we may miss critical information hidden within it. Here we combine dimensionality reduction (UMAP) and unsupervised hierarchical clustering (HDBSCAN) to quantitatively characterize prevalent coordination environments of chemical species within MD data. By focusing on local coordination, we significantly reduce the amount of data to be analyzed by extracting all distinct molecular formulas within a given coordination sphere. We then efficiently combine UMAP and HDBSCAN with alignment or shape-matching algorithms to partition these formulas into structural isomer families indicating their relative populations. The method was employed to reveal details of cation coordination in electrolytes based on molecular liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of flow regimes in arc plasma–gas interactions using a two-temperature arc in crossflow model

The perpendicular impingement of a gas stream on an electric arc, a configuration known as the arc in crossflow, is of primary relevance in the study of plasma-gas interactions, as well as in industrial applications such as circuit breakers and wire-arc spraying. The flow dynamics in the arc in crossflow are the result of coupled fluid-thermal-electromagnetic phenomena accompanied by large property gradients, which can produce significant deviations from Local Thermodynamic Equilibrium (LTE) among electrons and gas species. These characteristics can lead to the establishment of distinct flow regimes depending on the relative values of the controlling parameters of the system, such as inflow velocity, arc current, and inter-electrode spacing. A two-temperature non-LTE (NLTE) model is used to investigate the arc dynamics and the establishment of flow regimes in the arc in crossflow. The plasma flow model is implemented within a nonlinear Variational Multiscale (VMS) numerical discretization approach that is less dissipative, and hence better suited to capture unstable behavior, than traditional VMS methods commonly used in computational fluid dynamics simulations. The Reynolds and the Enthalpy dimensionless numbers, characterizing the relative flow strength and arc strength, respectively, are chosen as the controlling parameters of the system. Simulation results reveal the onset of dynamic behavior and the establishment of steady, periodic, quasi-periodic, and chaotic or potentially turbulent, regimes, as identified by distinct spatiotemporal fluctuations. The computational findings reveal the role of increasing the relative arc strength on enhancing flow stability by delaying the growth of fluctuating and unstable flow behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Iodine orbital moment and chromium anisotropy contributions to CrI 3 magnetism

The recent discovery of two-dimensional (2D) magnets, with a number of interesting magnetic properties, has drawn much interest due to their potential for future 2D spintronic device applications. CrI 3 , a van der Waals magnet, exhibits two-dimensional ferromagnetism even in monolayer form, stabilized by strong magnetic anisotropy. Its interlayer magnetic ordering is coupled to structural layer stacking, implying that the charge density distribution mediating van der Waals interactions plays a key role in the magnetic interaction between the layers. Using polarization-dependent x-ray spectroscopy, we investigated the response of the electronic environment around Cr and I sites to structural changes of layer stacking order. The highly anisotropic nature of the Cr local environment is significantly enhanced and is accompanied by changes in the valence band, in the rhombohedral phase. Magnetic spectroscopy measurements reveal a sizable iodine orbital moment, indicating the iodine contribution to magnetic anisotropy. Finally, our results uncover an important role for the extended nature of anisotropic Cr orbital states in dictating interlayer magnetic interactions and the iodine contribution to magnetic anisotropy.

36 MATERIALS SCIENCE↗

Landscape-scale characterization of Arctic tundra vegetation composition, structure, and function with a multi-sensor unoccupied aerial system

The Arctic is experiencing some of the most rapid climate change on Earth, with strong impacts on tundra ecosystems that are characterized by high land-surface and vegetation heterogeneity. Previous studies have explored this complexity using satellite remote sensing, however these typically coarse spatial resolution data have generally missed sub-pixel heterogeneity, leaving critical gaps in our understanding of tundra vegetation dynamics from the community to landscape scales. To address these gaps, we collected very high-resolution (1-5 cm) optical, structural, and thermal data at three low-Arctic tundra sites on the Seward Peninsula, Alaska, using a multi-sensor unoccupied aerial system (UAS). We examined the application of these data to studying tundra vegetation dynamics, by quantifying (1) canopy height and thermoregulation (leaf-air temperature) of representative plant functional types (PFTs), (2) fine-scale patterns of vegetation composition across landscapes, and (3) impacts of fine-scale vegetation composition on landscape-scale variation of canopy height and thermoregulation. Our results show that deciduous tall shrubs (those that can potentially grow >2 m) had a strong cooling effect, with canopy temperatures significantly lower than local air temperatures and other PFTs. Increased cover of tall shrubs also had the potential to reduce the cover of low-stature PFTs across the landscape, potentially associated with their closed canopy (i.e., increased light competition) and strong thermoregulation. To understand the connections between fine-scale vegetation composition and large-scale ecosystem processes, we produced a random forest model which showed that fine-scale PFT composition accounted for 86.8% and 74.2% of the landscape-scale variation in canopy height and thermoregulation, respectively. These findings highlight the importance of spatially detailed characterization of tundra PFTs to improve our ecological understanding and model representation of tundra vegetation, also transcend our study to show the need for continued collection of similar datasets to better understand the impacts of surface heterogeneity on the mapping and modeling of tundra ecosystem dynamics, as well as assist with conservation management and biodiversity monitoring strategies.

54 ENVIRONMENTAL SCIENCES↗

The health, climate, and equity benefits of freight truck electrification in the United States

Abstract Long-haul freight shipment in the United States relies on diesel trucks and constitutes ∼3% of U.S. greenhouse gas emissions and a significant share of local air pollution. Here, we compare the climate and air pollution-related health damages from electric versus diesel long-haul truck fleets. We use truck commodity flows to estimate tailpipe emissions from diesel trucks and regional grid emissions intensities to estimate charging emissions from electric trucks under various grid scenarios. We use a reduced complexity air quality model combined with valuation of air pollution-related premature deaths (using two hazard ratios (HRs)) and quantify the distributional health impacts in different scenarios. We find that annual health and climate costs of the current diesel fleet are $195–$249/capita compared to $174–$205/capita for a new diesel fleet, and $156–$177/capita for an electric fleet, depending on the HR. We find that freight electrification could avoid $6.2–8.5 billion in health and climate damages annually when compared to a fleet of new diesel vehicles (with even higher benefits when compared to the current diesel fleet). However, the Midwest and parts of the Gulf Coast would experience an increase in health damages due to vehicles charging using electricity from coal power plants. If old coal power plants (operating in 1980 or earlier) are replaced with zero-emission generation, electrification of all U.S. freight would result in $32.3–39.2 billion in avoided damages annually and health benefits throughout the U.S. Electrifying transport of consumer manufacturing goods (including electronics, transport equipment, and precision instruments) and food, beverage, and tobacco products would provide the largest absolute health and climate benefits, whereas mixed freight and manufacturing goods would result in the largest benefits per tonne-km. We find small variations in health damages across race and income. These results will help policymakers prioritize electrification and charging investment strategies for the freight transportation sub-sector.

Hennessy, Eleanor M. (ORCID:0000000294715765)↗

Transboundary effects from idealized regional geoengineering

Regional geoengineering, by reflecting sunlight over a very limited spatial domain, might be considered as a means to target specific regional impacts of climate change. One of the obvious concerns raised by such approaches is the extent to which the resulting effects would be detectable well beyond the targeted region (e.g. in neighbouring countries). A few studies have explored this question for targeted regions that are still comparatively large. We consider idealized simulations with increased ocean albedo over relatively small domains; the Gulf of Mexico (0.23% of Earth's surface) and over the Australian Great Barrier Reef (0.07%), both with negligible global radiative forcing. Applied over these very small domains, the only statistically significant non-local changes we find are some limited reduction on summer precipitation in Florida in the Gulf of Mexico case (adjacent to the targeted region). The lack of transboundary effects suggests that governance needs for such targeted interventions are quite distinct from those for more global sunlight reflection.

54 ENVIRONMENTAL SCIENCES↗

Geometry-complete perceptron networks for 3D molecular graphs

Abstract Motivation The field of geometric deep learning has recently had a profound impact on several scientific domains such as protein structure prediction and design, leading to methodological advancements within and outside of the realm of traditional machine learning. Within this spirit, in this work, we introduce GCPNet, a new chirality-aware SE(3)-equivariant graph neural network designed for representation learning of 3D biomolecular graphs. We show that GCPNet, unlike previous representation learning methods for 3D biomolecules, is widely applicable to a variety of invariant or equivariant node-level, edge-level, and graph-level tasks on biomolecular structures while being able to (1) learn important chiral properties of 3D molecules and (2) detect external force fields. Results Across four distinct molecular-geometric tasks, we demonstrate that GCPNet’s predictions (1) for protein–ligand binding affinity achieve a statistically significant correlation of 0.608, more than 5%, greater than current state-of-the-art methods; (2) for protein structure ranking achieve statistically significant target-local and dataset-global correlations of 0.616 and 0.871, respectively; (3) for Newtownian many-body systems modeling achieve a task-averaged mean squared error less than 0.01, more than 15% better than current methods; and (4) for molecular chirality recognition achieve a state-of-the-art prediction accuracy of 98.7%, better than any other machine learning method to date. Availability and implementation The source code, data, and instructions to train new models or reproduce our results are freely available at https://github.com/BioinfoMachineLearning/GCPNet.

59 BASIC BIOLOGICAL SCIENCES↗

Proteome-wide analysis of protein stability in Escherichia coli under acid stress

Knowledge of protein acid sensitivity remains sparse and is largely derived from low-throughput, enzyme-specific assays. We used a scalable framework to map acid stability across the Escherichia coli proteome to assess the acid stability of 1,675 unique proteins, estimating pH 50 values for over 90% of them. The parameter pH50 was defined as the pH value at which only 50% of the initial protein remains in solution following acid treatment. Proteome-wide pH 50 values ranged from 2.28 to 6.33 (median 5.11). Approximately 9% of detected proteins remained stable across all tested pH conditions. Our results align with published data and the assay of citrate synthase (GltA) performed here. Protein acid stability differed significantly by subcellular localization: periplasmic proteins were relatively more abundant in the acid-stable group, cytoplasmic proteins were abundant at pH 50 values 4.5–5.5, and inner membrane proteins at higher pH 50 between 5.5 and 6.0. Outer membrane proteins were too few to draw strong conclusions regarding enrichment within specific pH 50 groups. Notably, the periplasmic binding protein of the molybdate ABC transporter (ModA), was enriched after incubation at low pH. Estimated pH 50 values showed no correlation with protein isoelectric point and molecular weight. Together, this work provides the first proteome-wide map of protein acid stability and establishes a general framework for studying different chemical stressors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical antiferromagnetism of ordered face-centered cubic Cr-Ni alloys

Contrary to prior calculations, the Ni-rich ordered structures of the Cr-Ni alloy system are found to be antiferromagnetic under semilocal density-functional theory. The optimization of local magnetic moments significantly increases the driving force for the formation of CrNi 2 , the only experimentally observed intermetallic phase. This structure's ab initio magnetism appears well described by a Heisenberg Hamiltonian with longitudinal spin fluctuations; itinerant Cr moments are induced only by the strength of exchange interactions. The role of magnetism at temperature is less clear and several scenarios are considered based on a review of experimental literature, specifically a failure of the theory, the existence of an overlooked magnetic phase transition, and the coupling of antiferromagnetism to chemical ordering. In conclusion, implications for related commercial and high-entropy alloys are discussed for each case.

36 MATERIALS SCIENCE↗

A Simple Lagrangian Parcel Model for the Initiation of Summer-time Mesoscale Convective Systems over the Central United States

Mesoscale convective systems (MCSs) account for more than 50% of summertime precipitation over the central United States and have a significant impact on local weather and hydrologic cycle. It is hypothesized that the inadequate treatment of MCSs is responsible for the long-standing warm and dry bias over the central United States in coarse-resolution general circulation model (GCM) simulations. In particular, a better understanding of MCS initiation is still lacking. Here a single-column Lagrangian parcel model is first developed to simulate the basic features of a rising parcel. This simple model demonstrates the collective effects of boundary layer moistening and dynamical lifting in triggering convective initiation and reproduces successfully its early afternoon peak with surface equivalent potential temperature as a controlling factor. It also predicts that convection is harder to trigger in the future climate under global warming, consistent with the results from convection-permitting regional climate simulations. Then, a multicolumn model that includes an array of single-column models aligned in the east–west direction and incorporates idealized cold pool interaction mechanisms is developed. The multicolumn model captures readily the cold pool–induced upscale growth feature in MCS genesis from initially scattered convection that is organized into a mesoscale cluster in a few hours. It also highlights the crucial role of lifting effects due to cold pool collision and spreading, subsidence effect, and gust front propagation speed in controlling the final size of mesoscale clusters and cold pool regions. This simple model should be useful for understanding fundamental mechanisms of MCS initiation and providing guidance for improving MCS simulations in GCMs.

54 ENVIRONMENTAL SCIENCES↗

A Moist Potential Vorticity Model for Midlatitude Long-Lived Mesoscale Convective Systems over Land

Mesoscale convective systems (MCSs) bring large amounts of rainfall and strong wind gusts to the midlatitude land regions, with significant impacts on local weather and hydrologic cycle. However, weather and climate models face a huge challenge in accurately modeling the MCS life cycle and the associated precipitation, highlighting an urgent need for a better understanding of the underlying mechanisms of MCS initiation and propagation. From a theoretical perspective, a suitable model to capture the realistic properties of MCSs and isolate the bare-bones mechanisms for their initiation, intensification, and eastward propagation is still lacking. To simulate midlatitude MCSs over land, we develop a simple moist potential vorticity (PV) model that readily describes the interactions among PV perturbations, air moisture, and soil moisture. Multiple experiments with or without various environmental factors and external forcing are used to investigate their impacts on MCS dynamics and mesoscale circulation vertical structures. The result shows that mechanical forcing can induce lower-level updraft and cooling, providing favorable conditions for MCS initiation. A positive feedback among surface winds, evaporation rate, and air moisture similar to the wind-induced surface heat exchange over tropical ocean is found to support MCS intensification. Both background surface westerlies and vertical westerly wind shear are shown to provide favorable conditions for the eastward propagation of MCSs. Last, our result highlights the crucial role of stratiform heating in shaping mesoscale circulation response. In conclusion, the model should serve as a useful tool for understanding the fundamental mechanisms of MCS dynamics.

54 ENVIRONMENTAL SCIENCES↗

Electric-field enhancement caused by subwavelength-sized particles located on the surface of multilayer dielectric mirrors

A laser pulse impinging on the surface of an optical component can interact with particles, such as contamination debris, to produce a scattered electric field, which, either by itself or combined with the incident laser field, coherently can significantly increase the local field intensity. This effect can be of critical importance as it can reduce the laser-induced–damage threshold of the affected component. In this work, we use a field-propagation code to improve understanding regarding the factors that determine the magnitude and location of the electric-field enhancement for the case of subwavelength-sized particles located on the surface of multilayer dielectric mirrors.

47 OTHER INSTRUMENTATION↗

Preliminary Thermal-Hydraulic Analysis of the UTA–2 Subcritical Linear Accelerator–Driven System

The National Nuclear Security Administration’s mission includes establishing a reliable supply of 99 Mo without highly enriched uranium. Oak Ridge National Laboratory (ORNL) supports this objective through collaborative research and development with industrial partners. Niowave Inc., a current partner, is currently designing a subcritical linear accelerator-driven system (ADS) and preparing for the US Nuclear Regulatory Commission’s licensing process. Niowave’s system has the potential to efficiently supply medical radioisotopes. The technology includes a superconducting electron accelerator and a pile of both natural and low-enriched uranium (LEU) targets. The process fissions uranium and many valuable isotopes can then be extracted from the targets. Niowave is currently iterating through conceptual and detailed design processes for several system sizes. This report discusses UTA–2, which is at the demonstration stage. UTA–2 will validate numerical modeling results with experimental measurements before progressing to the detailed design of UTA–3, the commercial-sized ADS. The thermal-hydraulic behavior of the UTA–2 core design was numerically investigated using STAR-CCM+, as described in this report. STAR-CCM+, a state-of-the-art computational fluid dynamics (CFD) software that was commercially developed by Siemens, has an extensive user base and a set of validation studies. It is also compliant with the American Society of Mechanical Engineers’ Nuclear Quality Assurance 1 standard. Three cases are investigated in this report. Case 1 quantified the temperature field within the UTA–2 assembly and water tank using only conduction as the method of thermal energy transport. This simplified approach was overly conservative and yielded wetted cladding temperatures above the coolant saturation temperature. In this case, the maximum temperature of the wetted cladding surface of the highest power rod exceeded the saturation temperature of water by 63.8°C. Because of the overly conservative approach taken in Case 1 and its negative subcooled margin, buoyancy-driven natural circulation flow physics were implemented in Case 2. Adding coolant motion significantly distributed the thermal energy of the system through convective heat transfer. This relatively small amount of convective heat transfer significantly reduced system temperatures and increased the subcooled margin from –63.8 to 61.3°C. This margin confirmed that no boiling was expected during normal operation of UTA–2 at 230 W. Case 3 had no additional physics models but considered an overpower event during which the power of each LEU and natural uranium rod was at its respective peak values. This resulted in a study with the total assembly power equal to 176% of the nominal power of 230 W considered in Cases 1 and 2. The resulting natural circulation flows were slightly enhanced. The subcooled margin decreased slightly to 46.3°C, which is still a significant margin to local boiling of the water within the tank. This margin confirmed that no boiling was expected during an abnormal operation of UTA–2 at 406 W.

07 ISOTOPE AND RADIATION SOURCES↗

Uncovering New Physics in the Cosmic Microwave Background: Developing Novel Theoretical Models and Machine-Learning-Powered Constraints

The search for evidence of new physics via its signatures in the cosmos is a cornerstone goal of the Office of High Energy Physics in the DOE Office of Science. Indeed, the current concordance cosmological model provides intriguing hints for beyond-the-standard-model (BSM) physics, such as dark matter and dark energy. Recently, a potential breakdown has appeared in this model, which could be initial evidence toward a further important revision in our fundamental theoretical understanding of cosmology. This breakdown is reflected in disagreements between inferences of the current expansion rate of the universe, H 0 (the Hubble constant), based on indirect, cosmological data (e.g., from the early universe) and based on direct, local measurements. Despite significant effort, a compelling new concordance cosmological model has yet to be found; achieving significant progress on this front was the first major focus of the project. Theoretical considerations indicate that if the observational discrepancies are not due to systematic errors, they strongly suggest new physics operating in the redshift range just prior to recombination, when cosmic microwave background (CMB) photons last scattered. Crucially, almost all such models produce unique signatures in the CMB temperature and polarization power spectra, which will be measured with unprecedented precision by ongoing and upcoming experiments, including the DOE-supported CMB-S4 project. However, these subtle hints of new physics must be uncovered from beneath a swath of Galactic and extragalactic foreground contamination. Current CMB analysis methods, although powerful, do not optimally infer the CMB power spectrum in the presence of non-Gaussian foregrounds. There is thus scope for theoretical improvement in this foundational challenge of cosmological inference, which formed the second major focus of the project. The primary objectives of the project were two-fold: (1) to develop new theoretical models in cosmology that can restore concordance amongst the full suite of cosmological data sets, thereby potentially providing evidence of novel BSM physics; (2) to develop new theoretical machinery to enable significant sensitivity improvements in searches for new physics in cosmology, particularly via the CMB power spectrum. The two objectives are intertwined, as the analysis methodology improvements in (2) will enable the tightest possible constraints on the signatures of new physics predicted by the novel scenarios in (1). The theoretical approaches to restore concordance focused on models involving novel scalar field dynamics in the pre-recombination universe (the “early dark energy” scenario and modifications thereof), as well as couplings between this field and other components in the standard cosmological model, such as dark matter. We also studied a model featuring a generalization of the decaying dark matter scenario, in which a sub-component of dark matter converts into dark radiation at late times in cosmic history. While these ideas are mostly driven by phenomenological considerations, this tactic has proven extremely successful in cosmology throughout the past few decades, including in the early history of evidence for dark matter and dark energy. The new theoretical machinery envisioned in (2) is undergirded by developments in signal processing and machine learning, which will enable improvements in CMB power spectrum estimation in the presence of non-Gaussian foreground contaminants. In turn, this will yield optimal sensitivity in searches for new physics in the CMB, by maximizing the cosmological information that is extracted from this observable. The most ambitious outcome of this work would be the construction of a new cosmological model that restores concordance amongst data sets. Although the individual models studied here did not fully achieve that goal, significant progress in narrowing down the model space was made, as described below. Moreover, the outcome of the methodological improvements in (2) will significantly impact a wide range of theoretical cosmology, by enabling the tightest possible constraints on any model that leaves novel signatures in the CMB temperature and polarization power spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

A section 110 evaluation of the huron king test chamber, area 3, nevada national security site, nye county, nevada

The U.S. Department of Energy, National Nuclear Security Administration Nevada Field Office tasked Desert Research Institute (DRI) with the identification and evaluation of the Huron King Test Chamber as part of their cultural resources program obligations under Section 110 of the National Historic Preservation Act. The Huron King nuclear test was a vertical line-of-sight weapons effects test that took place in Area 3 on June 24, 1980. Unique to this event was a specially designed aboveground test chamber that held a model defense communications satellite in a vacuum tank meant to replicate the space environment. Sponsored by the Defense Nuclear Agency, the purpose of the experiment was to understand the response of the satellite and its materials and equipment to an electromagnetic pulse and attendant radiation. Between July and August 2022, DRI conducted an archival review on the Huron King experiment and its associated test chamber. Subsequently, pedestrian fieldwork was undertaken at the Huron King Test Chamber by DRI on September 29, 2022. During fieldwork, the outside of the test chamber was documented using a Nevada State Historic Preservation Office Architectural Resource Assessment form. This effort included verifying the substructures that compose the test chamber as determined by the archival review, as well as obtaining a detailed photographic recordation of the exterior and assessing its current condition. Notably, the site where the Huron King test took place has been abandoned and almost entirely naturalized. All of the portable instrumentation trailers, communications and data cabling, and winch systems used to retract the test chamber following the detonation were removed after completion of the experiment in 1980. Only the subsidence crater and the test chamber remain as physical evidence of this experiment. Based on these findings, DRI recommends that the Huron King Test Chamber is eligible for listing in the National Register of Historic Places (NRHP) at the local level under Significance Criteria A and C and that it meets Criteria Consideration G for properties less than 50 years old.

54 ENVIRONMENTAL SCIENCES↗