Search NASA⌕ Search

SEARCH · Search NASA

Results for “log normal distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Second ARM Aerosol Chemical Speciation Monitor Users’ Meeting Report

The aerosol chemical speciation monitor (ACSM) was developed to adapt the technology of the aerosol mass spectrometer (AMS) to routine, long-term, standalone monitoring. The calculation of particulate mass concentration from ACSM data requires the measurement of the response of the instrument to aerosol of specific size and composition as well as assumptions about the instrument response based on laboratory measurements and field experience acquired over more than two decades of operation of AMS and a decade of operation of the ACSM. Three parameters in the concentration calculations that are particularly important are the NO3 response factor (RFNO3), relative ionization efficiency (RIE), and the collection efficiency (CE). The values of RFNO3 and RIEs are determined from calibration, however the jump calibration method previously used in calibration can result in errors in the RIE for sulfate. This has been corrected by implementing a continuous calibration method. The default collection efficiency is 0.5. This has been shown to result in mass loadings that do not agree with mass determinations from other instruments because of effects of composition on the vaporization of the particles. The previous work of investigators addressing this issue is discussed. After preliminary work on ACSM and scanning mobility particle sizer (SMPS) data from the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility Southern Great Plains (SGP) observatory collected in late 2016 and 2017 produced a parameterization of composition dependent collection efficiency very different from the results of previous studies, SMPS data were examined and we determined that there was significant mass that the instrument did not capture because the particles with diameters larger than 465 nm are not counted by this instrument. Data for the ultra-high-sensitivity aerosol spectrometer (UHSAS), SMPS, and ACSM are available for nearly all of 2019. The data from UHSAS and SMPS collected in 2019 were compared. We found that the UHSAS data has particle counts and total volumes significantly less than measured by the condensation particle counter (CPC) and SMPS. The SMPS data were extended by fitting the average volume distribution with a log normal curve and using this relationship to estimate a mass value for the SMPS over extended diameter range. The extended SMPS mass values result in a CDCE parameterization that is in better agreement with the results of other investigators, but is still different from other formulations. The working group recommends that the ACSM data be processed with a collective efficiency (CE)=1, that this be documented clearly in the metadata, and the use of the default CE of 0.5 or a formulation of composition-dependent collection efficiencies (CDCE) chosen by the user should be implemented based on the ammonium nitrate mass fraction. This is clearly necessary for the wintertime SGP ACSM data because of the high nitrate concentrations.

47 OTHER INSTRUMENTATION↗

Laboratory Measurements and Model Sensitivity Studies of Dust Deposition Ice Nucleation

We investigated the ice nucleating properties of mineral dust particles to understand the sensitivity of simulated cloud properties to two different representations of contact angle in the Classical Nucleation Theory (CNT). These contact angle representations are based on two sets of laboratory deposition ice nucleation measurements: Arizona Test Dust (ATD) particles of 100, 300 and 500 nm sizes were tested at three different temperatures (-25, -30 and -35 C), and 400 nm ATD and kaolinite dust species were tested at two different temperatures (-30 and -35 C). These measurements were used to derive the onset relative humidity with respect to ice (RH{sub ice}) required to activate 1% of dust particles as ice nuclei, from which the onset single contact angles were then calculated based on CNT. For the probability density function (PDF) representation, parameters of the log-normal contact angle distribution were determined by fitting CNT-predicted activated fraction to the measurements at different RH{sub ice}. Results show that onset single contact angles vary from {approx}18 to 24 degrees, while the PDF parameters are sensitive to the measurement conditions (i.e. temperature and dust size). Cloud modeling simulations were performed to understand the sensitivity of cloud properties (i.e. ice number concentration, ice water content, and cloud initiation times) to the representation of contact angle and PDF distribution parameters. The model simulations show that cloud properties are sensitive to onset single contact angles and PDF distribution parameters. The comparison of our experimental results with other studies shows that under similar measurement conditions the onset single contact angles are consistent within {+-}2.0 degrees, while our derived PDF parameters have larger discrepancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative micro-luminescence and related studies of fine and/or glassy lunar surface materials

Papers on Raman and soft X-ray spectroscopy of lunar glasses and electron microscopy of lunar fines are presented. Individual particles of glasses from Apollo 11, 12, 14, and 15 samples were analyzed separately. Silicon emission shifts vary between parent rock types and can be interpreted as a range of Si-O distances from 1.612 to 1.637 A. Aluminum emission shifts relate to the amount of 4- and 6-coordinated Al in the glass. Raman spectra show broadened bands. Certain bands recur in many specimens and relate to the main normative minerals for the glass bulk composition, olivine, pyroxene, and anorthite. Quantitative size and shape analyses were carried out on six Apollo 14 and 15 samples of fines by computer evaluation of scanning electron microspace images. For the size range of 0.50 to 30 micron diameter, the distributions are log-normal on a number count basis. Aspect ratios range from 0.1 to 1.0 with an average value of about 0.6. The aspect ratios and a shape complexity factor vary only slightly among the samples.

Roy, R.↗

CESEMI studies of Apollo 14 and 15 fines.

Quantitative size and shape analyses have been carried out on six lunar fines from Apollo 14 and 15 by computer evaluation of scanning electron microscope images (CESEMI). For the size range of 0.50 to 30 microns diameter, the distributions are log-normal on a number count basis. This finding is in contrast with results for coarser materials in the fines reported by King et al. suggesting the operation of a different process. Aspect ratios range from 0.1 to 1.0 with an average value of about 0.6. Only slight differences are observed among samples. A shape complexity factor (ratio of particle perimeter to ellipse perimeter) also varies only slightly among the six samples.

Gorz, H.↗

Lower neck injury criteria for THOR and Hybrid III dummies in rear impact

The objectives of the study are to derive lower-neck-injury probability curves under rear impact loading from matched pair Hybrid III and THOR dummy tests. Methods: Twelve whole-body and 15 isolated head-neck rear-impact sled tests were conducted using the 2 dummies. They were positioned on a rigid seat that was attached to an acceleration sled. The dummies were positioned with the head parallel to the ground, torso against the seat back, and legs stretched such that there was no axial rotation. The acceleration pulse matched the previous in-house human cadaver tests. The 6-axis lower-neck load cell was used in both dummies. For the isolated rear-impact tests,the head-neck was excised from the dummies, and the lower-neck load cell was mounted to the top of the sled with the head parallel to the ground and such that the acceleration vector was in the rear impact mode. Lower-neck loads and lower-neck-injury criteria (LNij) were obtained using the load cell data and survival analysis to develop injury-assessment-risk values and curves for both dummies. The LNij criteria were determined for both dummies using the intercept value corresponding to the 90% probability level for the forces and moments. Results: The log normal and Weibull distributions were the optimal distributions for the Hybrid III and THOR devices. At the 50% risk level, the mean LNij of 1.1 and NCIS was 0.77 for the Hybrid III, and 1.5 NCIS was 0.30 for the THOR device. The quality indices were in the fair range and good range for the 2 dummies, respectively, at this risk level. Conclusions: The lower-neck-based IARCs and IARVs serve as the first dataset for injury assessments, and the THOR may be a better test device for assessing injures in rear impact environments.

Narayan Yoganandan↗

THE SIGNATURE OF THE WARM-HOT INTERGALACTIC MEDIUM IN WMAP AND THE FORTHCOMING PLANCK DATA

We compute the cross-correlation between the Warm-Hot Intergalactic Medium and maps of cosmic microwave background temperature anisotropies using a log-normal probability density function to describe the weakly nonlinear matter density field. We search for this contribution in the data measured by the Wilkinson Microwave Anisotropy Probe. We use a template of projected matter density reconstructed from the Two-Micron All-Sky Redshift Survey as a tracer of the electron distribution. The spatial distribution of filaments is modeled using the recently developed Augmented Lagrangian Perturbation Theory. On the scales considered here, the reconstructed density field is very well described by the assumed log-normal distribution function. We predict that the cross-correlation will have an amplitude of 0.03-0.3 {mu}K. The measured value is close to 1.5 {mu}K, compatible with random alignments between structure in the template and in the temperature anisotropy data. Using the W1 Differencing Assembly to remove this systematic gives a residual correlation dominated by Galactic foregrounds. Planck could detect the Warm-Hot Medium if it is well traced by the density field reconstructed from galaxy surveys. The 217 GHz channel will allow to eliminate spurious contributions and its large frequency coverage can show the sign change from the Rayleigh-Jeans to the Wien part of the spectrum, characteristic of the thermal Sunyaev-Zel'dovich effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantifying Graph Uncertainty from Communication Data

Graphs are a widely used abstraction for representing a variety of important real-world problems including emulating cyber networks for situational awareness, or studying social networks to understand human interactions or pandemic spread. Communication data is often converted into graphs to help understand social and technical patterns in the underlying communication data. However, prior to this project, little work had been performed analyzing how best to develop graphs from such data. Thus, many critical, national security problems were being performed against graph representations of questionable quality. Herein, we describe our analyses that were precursors to our final statistically grounded technique for creating static graph snapshots from a stream of communication events. The first analyzes the statistical distribution properties of a variety of real-world communication datasets generally fit best by Pareto, log normal, and extreme value distributions. The second derives graph properties that can be estimated given the expected statistical distribution for communication events and the communication interval to be viewed node observability, edge observability, and expected accuracy of node degree. Unfortunately, as that final process is under review for publication, we can't publish it here at this time.

97 MATHEMATICS AND COMPUTING↗

Ejected Particle Size Distributions from Shocked Metal Surfaces

Here, we present size distributions for particles ejected from features machined onto the surface of shocked Sn targets. The functional form of the size distributions is assumed to be log-normal, and the characteristic parameters of the distribution are extracted from the measured angular distribution of light scattered from a laser beam incident on the ejected particles. We also found strong evidence for a bimodal distribution of particle sizes with smaller particles evolved from features machined into the target surface and larger particles being produced at the edges of these features.

36 MATERIALS SCIENCE↗

THE AREA DISTRIBUTION OF SOLAR MAGNETIC BRIGHT POINTS

Magnetic bright points (MBPs) are among the smallest observable objects on the solar photosphere. A combination of G-band observations and numerical simulations is used to determine their area distribution. An automatic detection algorithm, employing one-dimensional intensity profiling, is utilized to identify these structures in the observed and simulated data sets. Both distributions peak at an area of {approx}45,000 km{sup 2}, with a sharp decrease toward smaller areas. The distributions conform with log-normal statistics, which suggests that flux fragmentation dominates over flux convergence. Radiative magneto-convection simulations indicate an independence in the MBP area distribution for differing magnetic flux densities. The most commonly occurring bright point size corresponds to the typical width of inter-granular lanes.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation of flight maneuver-load distributions by utilizing stationary, non-Gaussian random load histories

Random numbers were generated with the aid of a digital computer and transformed such that the probability density function of a discrete random load history composed of these random numbers had one of the following non-Gaussian distributions: Poisson, binomial, log-normal, Weibull, and exponential. The resulting random load histories were analyzed to determine their peak statistics and were compared with cumulative peak maneuver-load distributions for fighter and transport aircraft in flight.

Leybold, H. A.↗

Analysis of field size distributions, LACIE test sites 5029, 5033, and 5039, Anhwei Province, People's Republic of China

A study was made of the field size distributions for LACIE test sites 5029, 5033, and 5039, People's Republic of China. Field lengths and widths were measured from LANDSAT imagery, and field area was statistically modeled. Field size parameters have log-normal or Poisson frequency distributions. These were normalized to the Gaussian distribution and theoretical population curves were made. When compared to fields in other areas of the same country measured in the previous study, field lengths and widths in the three LACIE test sites were 2 to 3 times smaller and areas were smaller by an order of magnitude.

Podwysocki, M. H.↗

H2O-Silicate Microphysics in Ascending Volcanic Plumes on Mars

We begin this study with a simple investigation of the role of the particle size frequency distribution on adsorptive scavenging in the ascending cloud. We define a parcel of silicates and H2O, and allow that parcel to cool, monitoring the total H2O remaining in the vapor phase. In this case, we have defined 10(exp 7) kg of silicates in the test volume, with a log-normal size-frequency distribution, a mean grain size of 10(exp -5) m, and a minimum of 10(exp -6) square meters per particle. This is based on observations of terrestrial ash particles that reveal enormous internal surface area. We assume 10(exp 5) kg of H2O (approximately equal to 1 wt%). The results of this study show significant dependence of the H2O sequestered in the adsorbed phase.

Zent, A. P.↗

Statistical characteristics of cloud variability. Part 1: Retrieved cloud liquid water path at three ARM sites: Observed cloud variability at ARM sites

Statistical characteristics of cloud variability are examined for their dependence on averaging scales and best representation of probability density function with the decade-long retrieval products of cloud liquid water path (LWP) from the tropical western Pacific (TWP), Southern Great Plains (SGP), and North Slope of Alaska (NSA) sites of the Department of Energy’s Atmospheric Radiation Measurement Program. The statistical moments of LWP show some seasonal variation at the SGP and NSA sites but not much at the TWP site. It is found that the standard deviation, relative dispersion (the ratio of the standard deviation to the mean), and skewness all quickly increase with the averaging window size when the window size is small and become more or less flat when the window size exceeds 12 h. On average, the cloud LWP at the TWP site has the largest values of standard deviation, relative dispersion, and skewness, whereas the NSA site exhibits the least. Correlation analysis shows that there is a positive correlation between the mean LWP and the standard deviation. The skewness is found to be closely related to the relative dispersion with a correlation coefficient of 0.6. The comparison further shows that the log normal, Weibull, and gamma distributions reasonably explain the observed relationship between skewness and relative dispersion over a wide range of scales.

54 ENVIRONMENTAL SCIENCES↗

CdTe nanoparticles synthesized by laser ablation

Nanoparticle generation by laser ablation of a solid target in a liquid environment is an easy, fast, and 'green' method for a large scale production of nanomaterials with tailored properties. In this letter we report the synthesis of CdTe nanoparticles by femtosecond laser [387 nm, 180 fs, 1 kHz, pulse energy=6 {mu}J (fluence=1.7 J/cm{sup 2})] ablation of the target material. Nanoparticles with diameters from {approx}2 up to {approx}25 nm were observed to be formed in the colloidal solution. Their size distribution follows the log-normal function with a statistical median diameter of {approx_equal}7.1 nm. Their crystal structure is the same as that of the bulk material (cubic zincblende) and they are slightly Cd-rich (Cd:Te percentage ratio {approx}1:0.9). Photoluminescence emission from the produced nanoparticles was detected in the deep red ({approx}652 nm)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Time-strain separability in medium-amplitude oscillatory shear

Here, we derive and study equations for the weakly nonlinear medium-amplitude oscillatory shear (MAOS) response of materials exhibiting time-strain separability. Results apply to constitutive models with arbitrary linear memory function $\textit{m}$(s) and for both viscoelastic liquids and viscoelastic solids. The derived equations serve as a reference to identify which models are time-strain separable (TSS) and which may appear separable but are not, in the weakly nonlinear limit. More importantly, we study how the linear viscoelastic (LVE) relaxation spectrum, H($_\tau$), affects the frequency dependence of the TSS MAOS material functions. Continuous relaxation spectra are considered that are associated with analytical functions (log-normal and asymmetric Lorentzian distributions), fractional mechanical models (Maxwell and Zener), and molecular theories (Rouse and Doi-Edwards). TSS MAOS signatures reveal much more than just the perturbation parameter A in the shear damping function small-strain expansion, $h(_γ) = 1 + \text{A}_γ$$^2 + \mathcal{O}(_γ$$^4)$. Specifically, the distribution of terminal relaxation times is significantly more apparent in the TSS MAOS functions than their LVE counterparts. We theoretically show that this occurs because TSS MAOS material functions are sensitive to higher-order moments of the relaxation spectrum, which leads to the definition of MAOS liquids. We also show the first examples of MAOS signatures that differ from the liquid-like terminal MAOS behavior predicted by the fourth-order fluid expansion. This occurs when higher moments of the relaxation spectrum are not finite. The famous corotational Maxwell model is a subset of our results here, for which A = -1/6, and any LVE relaxation spectrum could be used.

36 MATERIALS SCIENCE↗

THE DENSITY VARIANCE-MACH NUMBER RELATION IN SUPERSONIC, ISOTHERMAL TURBULENCE

We examine the relation between the density variance and the mean-square Mach number in supersonic, isothermal turbulence, assumed in several recent analytic models of the star formation process. From a series of calculations of supersonic, hydrodynamic turbulence driven using purely solenoidal Fourier modes, we find that the 'standard' relationship between the variance in the log of density and the Mach number squared, i.e., {sigma}{sub ln}{sup 2}{sub {rho}/{bar {rho}}} = ln (1+b{sup 2}M{sup 2}), with b = 1/3, is a good fit to the numerical results in the supersonic regime up to at least Mach 20, similar to previous determinations at lower Mach numbers. While direct measurements of the variance in linear density are found to be severely underestimated by finite resolution effects, it is possible to infer the linear density variance via the assumption of log-normality in the probability distribution function. The inferred relationship with Mach number, consistent with {sigma}{sub {rho}/{bar {rho}}} approx. bM with b = 1/3, is, however, significantly shallower than observational determinations of the relationship in the Taurus Molecular Cloud and IC5146 (both consistent with b {approx} 0.5), implying that additional physics such as gravity is important in these clouds and/or that turbulent driving in the interstellar medium contains a significant compressive component. Magnetic fields are not found to change this picture significantly, in general reducing the measured variances and thus worsening the discrepancy with observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Relativistic Alfvén Turbulence at Kinetic Scales

Abstract In a strongly magnetized, magnetically dominated relativistic plasma, Alfvénic turbulence can extend to scales much smaller than the particle inertial scales. It leads to an energy cascade somewhat analogous to inertial- or kinetic-Alfvén turbulent cascades existing in nonrelativistic space and astrophysical plasmas. Based on phenomenological modeling and particle-in-cell numerical simulations, we propose that the energy spectrum of such relativistic kinetic-scale Alfvénic turbulence is close to k −3 or slightly steeper than that due to intermittency corrections or Landau damping. We note the analogy of this spectrum with the Kraichnan spectrum corresponding to the enstrophy cascade in 2D incompressible fluid turbulence. Such turbulence strongly energizes particles in the direction parallel to the background magnetic field, leading to nearly one-dimensional particle momentum distributions. We find that these distributions have universal log-normal statistics.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Mount St. Helens ash from optical photoelectric photometry

The optical properties of suspended dust particles from the eruption of Mt. St. Helens on July 23, 1980 are investigated using photoelectric observations of standard stars obtained on the 0.76-m telescope at the University of Washington 48 hours after the eruption. Measurements were made with five broad-band filters centered at 3910, 5085, 5480, 6330, and 8050 A on stars of varying color and over a wide range of air masses. Anomalous extinction effects due to the volcanic ash were detected, and a significant change in the wavelength-dependent extinction parameter during the course of the observations was established by statistical analysis. Mean particle size (a) and column density (N) are estimated using the Mie theory, assuming a log-normal particle-size distribution: a = 0.18 micron throughout; N = 1.02 x 10 to the 9th/sq cm before 7:00 UT and 2.33 x 10 to the 9th/sq cm after 8:30 UT on July 25, 1980. The extinction is attributed to low-level, slowly migrating ash, possibly combined with products of gas-to-particle conversion and coagulation.

Cardelli, J. A.↗