SEARCH · Search NASA

Results for “low viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Volcanism on Venus as inferred from the morphometry of large shields

Morphometric data for the Venusian shields are compared with those for large volcanos on Mars and the Big Island shield in Hawaii. Reasonable assumptions and constraints on the chemical and physical properties of venusian magma, crust, and lithosphere are used with the morphometric data to estimate probable deep magma-source depths below the shields. Such data for selected large volcanos on Venus, Mars, and earth are presented. The flattened profiles of the Venusian shields are interpreted to be predominantly the result of the density contrast between lava and rocks between the source and surface, a relatively shallow depth to a primary magma source, low magma viscosity, high magma volumes and rates, and the inferred presence of flanking vents and lava tubes that carried lavas great distances from the summit. The measured shield heights are used in conjunction with a reasonable range of magma and rock densities to estimate the depths to deep magma sources, yielding an average of 25 km beneath the Venusian plains with a range depth of 3 to 40 km.

Schaber, G. G.↗

NASA NTRS1991

Analysis of a swirl stabilized arcjet thruster

Viscous swirling flow through transonic converging-diverging nozzles (with and without centerbodies) is examined numerically. An implicit technique is used to solve the axisymmetric Thin Layer Naiver-Stokes equations. The effect of swirl and viscosity on low Reynolds number flows is shown by examining integral parameters and flowfield details.

Keith, Theo G., Jr.↗

NASA NTRS1992

Lattice Boltzmann model for compressible fluids

A lattice Boltzmann model is derived which simulates compressible fluids. By choosing the parameters of the equilibrium distribution appropriately, the sound speed (which may be set arbitrarily low), bulk viscosity, and kinematic viscosity can be selected. This model simulates compressible flows and can include shocks. With a proper rescaling and zero-sound speed, this model simulates Burgers's equation. The viscosity determined by a Chapman-Enskog expansion compares well with that measured form simulations. The exact solutions of Burgers's equation on the unit circle are compared to solutions of lattice Boltzmann model finding reasonable agreement.

Alexander, F. J.↗

NASA NTRS1992

Polar motions excited by a convecting viscous mantle

The role played by time-dependent mantle convection on exciting long-term polar motions is examined by means of a viscous model. For sufficiently low effective viscosity, polar-wander speeds of 0(1 deg/Myr) would require contributions from the off-diagonal elements of the inertia tensor, with magnitudes around 100,000 times smaller than those found in viscoelastic models used for postglacial rebound. Contributions from the large-scale mantle flow to the angular momentum vector can be comparable to those due to changes in moment of inertia tensor for nonlinear rheology or for young planet. The relative roles of the two contributions depend on the nonlinear rheology of the mantle and its convective vigor.

Moser, Jiri↗

NASA NTRS1992

Multiringed impact craters on Venus - An overview from Arecibo and Venera images and initial Magellan data

Fifteen peak-ring craters, defined by a distinct outer rim and an inner ring of concentrically-arranged peaks, have been revealed by the examination of Arecibo and Venera 15/16 radar images of Venus. The overall morphology of these craters is similar to that of peak-ring craters on the other terrestrial planets, but the craters are of much smaller diameters. Nevertheless, the effective viscosities are low enough at depth to allow inward asthenospheric flow.

Alexopoulos, Jim S.↗

NASA NTRS1994

Phenylethynyl-Terminated Poly(Arylene Ethers)

Phenylethynyl-terminated poly(arylene ethers) synthesized in wide range of molecular weights by adjusting monomer ratios and adding appropriate amounts of 4-phenylethynyl-4'-fluorobenzophenone to monomers to end-cap oligomers during polymerization. Have low molecular weights and low melt viscosities, and are easily processed as adhesives, composites, and moldings. Thermally cured to provide materials that are crosslinked and insoluble in common organic solvents. Exhibit increased resistance to solvents, greater tensile moduli, and better high-temperature properties. Useful as adhesives, composite matrices, and moldings, especially in applications in which combination of toughness and resistance to solvents needed.

Jensen, Brian J.↗

NASA NTRS1994

Phenylethynyl-Terminated Polyimides

Phenylethynyl-terminated polyimides exhibit properties suitable for films, moldings, adhesives, and composite-material matrices. Polyimides synthesized at various molecular weights, selected to obtain desirable properties for specific applications. Thermally cured to form cross-linked molecular structures typically increasing resistance to solvents, glass-transition temperatures, and moduli of elasticity. Also have low molecular weights and low melt viscosities for easier processing into composites and adhesive bonds.

Jensen, Brian J.↗

NASA NTRS1994

Effect Of Molecular Weight On Adhesive Properties Of The Phenylethynyl-Terminated Polyimide LARC(sup TM)-PETI-5

Future civilian aircraft will require the use of advanced adhesive systems with high temperature capabilities. One such material has been developed at the NASA Langley Research Center, a phenylethynyl-terminated polyimide given the designation LARC(sup TM)-PETI-5. Recent work has shown the advantages of similar phenylethynyl-terminated polyimides as films, moldings, adhesives, and composite matrix resins. Phenylethynyl-terminated oligomers provide greater processing windows than materials which incorporate simple ethynyl endcaps. Since these low molecular weight, low melt viscosity oligomers thermally cure without the evolution of volatile by-products, they provide an excellent means of producing polymers with high glass transition temperatures, excellent solvent resistance, and high mechanical properties. Three different versions of LARC(sup TM)-PETI-5 with theoretical number average molecular weights (M(sub n)s) of 250, 5000, and 10000 g/mol were synthesized in this work. Differential Scanning Calorimetry (DSC) measurements were performed on the dry powder form of these materials to establish cure conditions which result in high glass transition temperatures (T(sub g)s). Lap shear specimens were prepared from adhesive tape made from each material and with the thermal cure conditions determined from the DSC data. The tensile shear data established processing conditions which provided the best adhesive strengths. Further testing was performed to establish the properties of LARC(sup TM)-PETI-5 as an adhesive material and to determine its solvent resistance.

Cano, Roberto J.↗

NASA NTRS1997

Adhesive Properties of Cured Phenylethynyl containing Imides

As part of a program to develop structural adhesives for high performance aerospace applications, several phenylethynyl containing oligomer blends of Larc(TM) MPEI and a reactive plasticizer designated LaRC LV-1 21 were prepared and evaluated. The fully imidized blends exhibited minimum melt viscosity as low as 1000 poise at 371 C. Ti/Ti lap shear specimens fabricated at 316 C under 15 psi gave RT strength of approx. 4300 psi and no change in strength was observed at 177 C. The chemistry and properties of this new MPEI as well as some blends of MPEI with LV-121 are presented and compared to the linear version, LARC(TM)-PETI-5.

Chang, Alice C.↗

NASA NTRS1998

Synthesis and Characterization of Modified Phenylethynyl Terminated Polyimides

As an ongoing effort to develop structural adhesives for high performance aerospace applications, recent work has focused on phenylethynyl terminated imide (PETI) oligomers. The work reported herein involves the synthesis and characterization of a series of phenylethynyl containing oligomers designated LARC (TM) MPEI (Modified Phenylethynyl Terminated Polyimide). These oligomers contain mixtures of linear, branched and star-shaped molecules. The fully imidized polymers exhibited minimum melt viscosity as low as 600 poise at 335 C. Ti/Ti lap shear specimens processed at 288 C under 15 psi showed tensile shear strength of approx. 6000 psi and 5200 psi at ambient and 350 F temperatures, respectively. The chemistry and properties of these new MPEIs are presented and compared to an optimized linear PETI, LaRC(Tm) -PETI-5.

Chang, Alice C.↗

NASA NTRS1998

Synthesis and Characterization of Modified Phenylethynyl Imides

As an ongoing effort to develop structural adhesives for high-performance aerospace applications, recent work has focused on phenylethynyl terminated imide (PETI) oligomers. The work reported herein involves the synthesis and characterization of a series of phenylethynyl containing oligomers designated LARC(TM) MPEI (modified phenylethynyl imide). These oligomers presumably contain mixtures of linear, branched and star-shaped molecules. The fully imidized polymers exhibited minimum melt viscosities as low as 600 poise at 335 C, significantly lower than equivalent molecular weight linear materials. Ti/Ti lap shear specimens processed at 288 C under 15 psi showed tensile shear strengths as high as approx. 6000 psi and 5200 psi at ambient temperature and 177 C respectively. The chemistry and properties of these new MPEIs are presented and compared with an optimized linear PETI, LARC(TM)PETI-5.

Jensen, B. J.↗

NASA NTRS2000

AC Calorimetry and Thermophysical Properties of Bulk Glass-Forming Metallic Liquids

Thermo-physical properties of two bulk metallic glass forming alloys, Ti34Zr11Cu47Ni8 (VIT 101) and Zr57Nb5Ni12.6Al10CU15.4 (VIT 106), were investigated in the stable and undercooled melt. Our investigation focused on measurements of the specific heat in the stable and undercooled liquid using the method of AC modulation calorimetry. The VIT 106 exhibited a maximum undercooling of 140 K in free radiative cooling. Specific heat measurements could be performed in stable melt down to an undercooling of 80 K. Analysis of the specific heat data indicate an anomaly near the equilibrium liquidus temperature. This anomaly is also observed in y the temperature dependencies of the external relaxation time, the specific volume, and the surface tension; it is tentatively attributed to a phase separation in the liquid state. The VIT 101 specimen exhibited a small undercooling of about 50 K. Specific heat measurements were performed in the stable and undercooled melt. These various results will be combined with ground based work such as the measurement of T-T-T curves in the electrostatic levitator and low temperature viscosity and specific heat measurements for modeling the nucleation kinetics of these alloys.

Johnson, William L.↗

NASA NTRS2000

High Temperature Transfer Molding Resins

High temperature resins containing phenylethynyl groups that are processable by transfer molding have been prepared. These phenylethynyl containing oligomers were prepared from aromatic diamines containing phenylethynyl groups and various ratios of phthalic anhydride and 4-phenylethynlphthalic anhydride in glacial acetic acid to form a mixture of imide compounds in one step. This synthetic approach is advantageous since the products are a mixture of compounds and consequently exhibit a relatively low melting temperature. In addition, these materials exhibit low melt viscosities which are stable for several hours at 210-275 C, and since the thermal reaction of the phenylethynyl group does not occur to any appreciable extent at temperatures below 300 C, these materials have a broad processing window. Upon thermal cure at approximately 300-350 C, the phenylethynyl groups react to provide a crosslinked resin system. These new materials exhibit excellent properties and are potentially useful as adhesives, coatings, films, moldings and composite matrices.

Connell, John W.↗

NASA NTRS2001

Phenylethynyl Terminated Arylene Ether Oxadiazole and Triazole Oligomers and Their Cured Polymers

Several novel phenylethynyl terminated arylene ether oligomers containing oxadiazole and triazole rings were prepared as part of an effort to develop high performance polymers with an attractive combination of properties (e.g. processability and mechanical performance) for future NASA applications. The oligomers displayed low melt viscosities and good solubilities. Thin films cast from solutions of the oligomers and cured for one hour at 350 C in air gave good tensile properties. Titanium to titanium (6Al-4V) tensile shear specimens were readily fabricated and provided moderate strengths. The chemistry and properties of these new materials are discussed.

Thompson, C. M.↗

NASA NTRS2002

Adhesive and Composite Properties of a New Phenylethynyl Terminated Imide

A relatively new phenylethynyl terminated imide oligomer (PETI) from the reaction of 2,3,',4'- biphenyltetracarboxylic dianhydride, 4,4'-oxydianiline and endcapped with 4- phenylethynylphthalic anhydride at a calculated number average molecular weight of 5000 g/mole was evaluated as an adhesive and composite matrix. The asymmetric dianhydride imparts a low melt viscosity to the oligomer and a high glass transition temperature to the cured resin. Preliminary adhesive work with titanium (6Al-4V) adherend gave good room temperature (RT) tensile shear strengths and excellent retention of RT strength at 260 C. Preliminary composite work using unsized IM7 carbon fiber provided moderate to high mechanical properties. The chemistry, mechanical, and physical properties of the new PETI in neat resin, adhesive and composite form are presented.

Thompson, C. M.↗

NASA NTRS2003

Research to Significantly Enhance Composites Survivability at 550 F in Oxidative Environments

Methylene dianiline (MDA) and its derivatives have been used in the synthesis of polyimides to yield polymers with characteristic low-density, high tensile strength, improved solubility in organic solvents, low-melt viscosities and high thermal stability (greater than 550 F) in air. Polyimides with such properties are desirable for use in aerospace systems, e.g., jet engines, airframe, missiles, and rockets where weight is critical. Recent research at Prairie View A&M University is focused on developing monomers to generate polyimides with enhanced performance over that of NASA s PMR-15. The objective of this work is to synthesize three ring aromatic diamines which are non-toxic and when reacted with the appropriate dianhydrides will yield polyimides with lower viscosity, improve processability, good retention of mechanical properties, and oxidative stability at high environmental temperatures. Modifications of the three ring aromatic diamines include replacing the methylene linkages with aromatic ethers by nucleophilic aromatic substitution reactions and incorporating mono- and di-substituents to the center aromatic ring. An update of current reactions involved in synthesis efforts to generate three ring aromatic monomers for polyimides with methylene, carbonyl, and ether linkages separating the aromatic moieties will be displayed.

Meador, Michael A.↗

NASA NTRS1997

Adhesive Properties of Cured Phenylethynyl Containing Imides

Considerable attention has been directed towards acetylene terminated oligomers over the last 20 years' and recent work has focused on phenylethynyl terminated imide (PETI) oligomers. These reactive oligomers possess several features which make them attractive candidates for use as composite matrices and adhesives. The phenylethynyl group can be readily incorporated into many different functionalized oligomers. The reactive oligomers possess relatively low melt viscosities and thermally cure without the evolution of volatile by-products. Once cured, they typically display high glass transition temperatures (Tgs), excellent solvent resistance and high mechanical properties. new modified phenylethynyl-terminated imide (LaRC MPEI) oligomers were synthesized at various molecular weights utilizing a small amount of trifunctional amine. As long as the amount of triamine is relatively small, this approach produces a mixture of linear, star-shaped and branched polymer chains that has lower melt and solution viscosity than an equivalent molecular weight linear phenylethynyl terminated imide oligomers. The work reported herein involves the synthesis and characterization of a copolymer using this approach and the preparation of blends utilizing a phenylethynyl containing reactive plasticizer of lower molecular weight called LaRC LV-121. The chemistry and properties of this new MPEI as well as some blends of MPEI with LV-121, are presented and compared to the linear version, LARC-PETI-5.

Jensen, Brian J.↗

NASA NTRS2005

High T(sub g) Polymides for Resin Transfer Molding

A series of new polyimide resins with low melt viscosities and high glass transition temperatures (T(sub g)'s) of 340-350 C were developed for resin transfer molding (RTM) applications. The viscosities of these polyimide resins, based on 2,3,3'4'-Biphenyltetracarboxylic Dianhydride (a-BPDA), are in the range of 10-30 poise. The composites were fabricated successfully at 260-280 C with a pot life of 30-60 minutes by the RTM process. The viscosity profiles of the polyimide resins and the mechanical properties of the polyimide carbon fiber composites will be discussed.

Chuang, Kathy C.↗