Results for “membrane property” — Page 13

DOE OSTI2025

Anion exchange membranes based on (3-acrylamidopropyl) trimethylammonium chloride (APTA) and phenyl Acrylate: Impact of crosslinker and crosslinker content on physiochemical properties and transport behavior of acetate and formate

CO 2 reduction cells are innovative devices that convert CO 2 into valuable chemicals, such as formate (OFm - ) and acetate (OAc - ), at the cathode. One of the key challenges in these devices is the development of ion exchange membranes that enable the transport of charge carriers between electrodes while minimizing the transfer of CO 2 reduction products. This study focuses on the preparation and characterization of crosslinked anion exchange membranes (AEMs) made of phenyl acrylate (PA) and (3-acrylamidopropyl) trimethylammonium chloride (APTA), crosslinked with either poly(ethylene glycol) diacrylate (PEGDA) or N,N’-methylenebisacrylamide (MBAA). Here, the membranes are characterized to understand their physiochemical properties and corresponding transport behavior through characterization of water volume fraction, mechanical properties, ionic conductivity, ion exchange capacity, water contact angle, glass transition temperature as well as their permeability and solubility to formate and acetate. MBAA crosslinked membranes exhibit higher Young’s modulus and lower strain at break compared to PEGDA-crosslinked membranes, which is attributed to their shorter chain length. Within a series of membranes of varied comonomer content, for either PEGDA or MBAA as crosslinker, permeabilities generally follow free volume theory (increasing permeability with increasing water content where water content increases with decreasing crosslinker content). Interestingly, for membranes with different crosslinkers but analogous water volume fraction significant differences (∼2 orders of magnitude) in permeability are observed which we attribute to differences in chain mobility as characterized through the glass transition temperature.

25 ENERGY STORAGE↗

DOE OSTI2025

Rippled metamaterials with scale-dependent tailorable elasticity

Thermally induced ripples are intrinsic features of nanometer-thick films, atomically thin materials, and cell membranes, significantly affecting their elastic properties. Despite decades of theoretical studies on the mechanics of suspended thermalized sheets, controversy still exists over the impact of these ripples, with conflicting predictions about whether elasticity is scale-dependent or scale-independent. Experimental progress has been hindered so far by the inability to have a platform capable of fully isolating and characterizing the effects of ripples. This knowledge gap limits the fundamental understanding of thin materials and their practical applications. Here, we show that thermal-like static ripples shape thin films into a class of metamaterials with scale-dependent, customizable elasticity. Utilizing a scalable semiconductor manufacturing process, we engineered nanometer-thick films with precisely controlled frozen random ripples, resembling snapshots of thermally fluctuating membranes. Resonant frequency measurements of rippled cantilevers reveal that random ripples effectively renormalize and enhance the average bending rigidity and sample-to-sample variations in a scale-dependent manner, consistent with recent theoretical estimations. The predictive power of the theoretical model, combined with the scalability of the fabrication process, was further exploited to create kirigami architectures with tailored bending rigidity and mechanical metamaterials with delayed buckling instability.

Applied Physical Sciences↗

DOE OSTI2023

Morphology–Diffusivity Relationships in Fluorine-Free Random Terpolymers for Proton-Exchange Membranes

Here, using atomistic molecular dynamics simulations, we investigate the morphology and transport properties of a new family of fluorine-free terpolymers designed as proton-exchange membranes. Simulated random terpolymers consist of three monomers with a 5-carbon backbone with a phenylsulfonate, phenyl, or no pendant group and have ion exchange capacities (IECs) ranging from 1.06–4.14 mmol/g. At a hydration level of 9, cluster analysis reveals macrophase separation between water and terpolymers with IEC < 2.1 mmol/g and continuous, percolated hydrophilic and hydrophobic nanoscale domains at higher IECs. Channel width distribution analysis of the percolated morphologies revealed that more hydrophobic units produce less uniform channels. Decreasing the surface area per sulfonate group and increasing the fractal dimension of the hydrophilic domains correlate with increased water diffusivity, due to a more acidic interface and more isotropic water channels. Relative to the previously studied phenylsulfonate homopolymer, these terpolymers with lower IECs have only modestly lower water diffusion, and we anticipate other advantages related to processability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Magnetic La 0.7 Sr 0.3 MnO 3 Membranes Synthesized by Etching a Sr 3 Al 2 O 6 Sacrificial Layer Using an Intermediary Manganite Protection Layer

The integration of perovskite oxides onto flexible substrates has witnessed significant advancements owing to the development of an epitaxial lift-off technique utilizing a Sr 3 Al 2 O 6 sacrificial layer. However, Sr 3 Al 2 O 6 is susceptible to instability in both air and high-temperature oxygen atmospheres, potentially leading to degradation during the growth of the functional oxide layer. In this study, we investigate the use of an oxygen-deficient La 0.7 Sr 0.3 MnO 3 as capping layer, and demonstrate its ability to stabilize Sr 3 Al 2 O 6 films in ambient air. We successfully synthesized freestanding La 0.7 Sr 0.3 MnO 3 membranes by etching this sacrificial layer and transferring them onto flexible polymer substrates. Importantly, the magnetic properties of the La 0.7 Sr 0.3 MnO 3 films are preserved in these membranes. Furthermore, our results underline that employing a thin manganite capping layer ensures both high structural quality and the preservation of functional properties in the resulting membranes.

Deposition↗

DOE OSTI2020

Vibrational Spectroscopic Monitoring of the Gelation Transition in Nafion Ionomer Dispersions

Infrared and Raman spectroscopy techniques were applied to investigate the drying and aggregation behavior of Nafion ionomer particles dispersed in aqueous solution. Gravimetric measurements aided the identification of gel-phase development within a series of time-resolved spectra that tracked transformations of a dispersion sample during solvent evaporation. A spectral band characteristic of ionomer sidechain end group vibration provided a quantitative probe of the dispersion-to-gel change. For sets of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectra, adherence to Beer's law was attributed to the relatively constant refractive index in the frequency region of hydrated –SO$^{–}_{3}$ group vibrations as fluorocarbon-rich ionomer regions aggregate in forming the structural framework of membranes and thin films. Although vibrational bands associated with ionomer backbone CF 2 stretching vibrations were affected by distortion characteristic of wavelength-dependent refractive index change within a sample, the onset of band distortion signaled gel formation and coincided with ionomer mass % values just below the critical gelation point for Nafion aqueous dispersions. Similar temporal behavior was observed in confocal Raman microscopy experiments that monitored the formation of a thin ionomer film from an individual dispersion droplet. For the ATR FT-IR spectroscopy and confocal Raman microscopy techniques, intensity in the water H–O–H bending vibrational band dropped sharply at the ionomer critical gelation point and displayed a time dependence consistent with changes in water content derived from gravimetric measurements. The reported studies lay groundwork for examining the impact of dispersing solvents and above-ambient temperatures on fluorinated ionomer transformations that influence structural properties of dispersion-cast membranes and thin films.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Assembly of Building Blocks by Double-End-Anchored Polymers in the Dilute Regime Mediated by Hydrophobic Interactions at Controlled Distances

Hierarchical assembly of building blocks via competing, orthogonal interactions is a hallmark of many of nature’s composite materials that do not require highly specific ligand-receptor interactions. To mimic this assembly mechanism requires the development of building blocks capable of tunable interactions. In the present work, we explored the interplay between repulsive (steric and electrostatic) and attractive hydrophobic forces. The designed building blocks allow hydrophobic forces to effectively act at controlled, large distances, to create and tune the assembly of membrane-based building blocks under dilute conditions and affect their interactions with cellular membranes via physical cross-bridges. Specifically, we employed double-end-anchored poly(ethylene glycol)s (DEA-PEGs)—hydrophilic PEG tethers with hydrophobic tails on both ends. Using differential-interference-contrast optical microscopy, synchrotron small angle X-ray scattering (SAXS), and cryogenic electron microscopy, we investigated the ability of DEA-PEGs to mediate assembly in the dilute regime on multiple length scales and on practical time scales. The PEG length, anchor hydrophobicity, and molar fraction of DEA-PEG molecules within a membrane strongly affect the assembly properties. Additional tuning of the intermembrane interactions can be achieved by adding repulsive interactions via PEG-lipids (steric) or cationic lipids to the DEA-PEG-mediated attractions. Further, while the optical and electron microscope imaging methods provided qualitative evidence of the ability of DEA-PEGs to assemble liposomes, the SAXS measurements and quantitative line-shape analysis in dilute preparations demonstrated that the ensemble average of loosely organized liposomal assemblies maintains DEA-PEG concentration-dependent tethering on defined nanometer length scales. For cationic liposome–DNA nanoparticles (CL–DNA NPs), aggregation induced by DEA-PEGs decreased internalization of NPs by cells, but tuning the DEA-PEG-induced attractions by adding repulsive steric interactions via PEG-lipids limited aggregation and increased NP uptake. However, confocal microscopy imaging together with colocalization studies with Rab11 and LysoTracker as markers of intracellular pathways showed that modifying CL–DNA NPs with DEA-PEGs alters their interactions with the plasma and endosomal membranes.

- x-ray scattering↗

DOE OSTI2026

Scalable slot-die coating of phyllosilicate membranes for selective ion separations

Abstract Two-dimensional (2D) materials have recently drawn attention as candidate materials for molecular-scale membrane separations due to their tunable nanoscale interlayer properties. Phyllosilicates, a broad class of naturally abundant 2D clay minerals, offer significant advantages over synthetic 2D materials, including low cost, stability, and environmental compatibility. While these properties make phyllosilicates attractive for industrial-scale nanofiltration applications, phyllosilicate-based membranes have, to date, only been fabricated at the lab scale via vacuum filtration. Scalable fabrication methods are essential to advance the technical maturity of phyllosilicate membranes and bring these promising materials closer to large-scale adoption. Herein, we have successfully scaled up phyllosilicate (vermiculite) membrane fabrication via slot-die coating and roll-to-roll coating of an ethylenediamine–vermiculite (EDAVM) mixture onto nylon. The coated membranes are 1–2 μm $ \unicode{x03BC} \mathrm{m} $ mu m in thickness and exhibit similar structure and performance to vacuum-filtered EDAVM membranes. The membranes also show selectivity for monovalent ions over multivalent ions in binary salt mixtures. This work represents a major step toward scaling up phyllosilicate membranes for industrial ion separation applications such as resource recovery from water.

Booth, Austin [Princeton University]↗

DOE OSTI2024

A lyotropic liquid crystal-templated nanofiltration membrane with thermo- and pH-responsive 3D transport pathway

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Self-assembled nanofiltration membranes with thermo- and pH-responsive behavior

We produce controlled nanostructured membranes from cross-linking of self-assembled diacrylated poloxamers. At sufficiently high concentrations, poloxamers form lyotropic liquid crystals (LLCs), such as lamellar (L α ), cubic packing of spherical micelles, and hexagonal packing of rod-like micelles in water (H 1 ). We use the H 1 phase as a template to produce orderly packed nanofibrous membranes. The obtained membrane has a continuous 3D transport pathway and can alter its nanofiltration (NF) properties in response to changes in temperature and pH. The formulation includes Pluronic P84-diacrylate (P84DA), a thermoresponsive component that acts as both macromer and structure-directing amphiphile. P84DA facilitates changes in membrane pore size with temperature due to its thermoresponsiveness when it is in contact with water. Furthermore, the precursor contains acrylic acid (AAc) as the charged component, which upon copolymerization with P84DA, not only enables ion separation through Donnan exclusion but also imparts pH-responsive behavior for the separation of ionic species. The membrane performance is studied and compared with a commercial NF membrane (NF270). We show that the synthesized NF membrane has separation properties adjustable with temperature and pH with exceptional resistance to fouling by various solutes due to its highly hydrophilic surface. Furthermore, the membrane shows an outstanding sulfate over chloride ion selectivity, which is a requirement for salt fractionation applications. Deducted from separate experiments, the ideal chloride/sulfate selectivity for magnesium cation is about 2.38 at low ionic strengths. This study is done on a model system to show the capability of incorporating pH-responsiveness in LLC templated membranes, in which the pH-responsive range can be designed by changing the charged groups of comonomer in the formulation.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer

Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.

Han, Ne Myo↗

DOE OSTI2022

Multiplication of freestanding III-V semiconductor membranes from a single wafer by alternating growth with amorphous graphene interlayer

Freestanding single-crystalline III-V compound semiconductors are important building blocks for functional devices due to their high electron mobilities, a wide range of bandgaps, and excellent optoelectronic properties. Despite efforts to produce such membranes by detaching epitaxial layers from donor wafers, current methods suffer from either slow processes or poor material quality. Here, we demonstrate a technique to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, a process to directly grow amorphous graphene on III-V substrates in metal-organic chemical vapor deposition reactors is developed, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of amorphous graphene and III-V epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because amorphous graphene provides a weak van der Waals interface that allows peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.

Han, Ne Myo↗

DOE OSTI2025

Unveiling the Reactivity of Fluoropolymers with Sodium Metal: Mechanistic Insights and Battery Implications

Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) has broad applications across various metal-ion battery systems, such as a binder for electrodes, a supporting matrix for electrolytes, and a separator material. Due to its excellent mechanical properties, PVDF-HFP has become an excellent candidate for fabricating gel and solid-state electrolytes in sodium-based batteries. However, in this study, we noticed notable side reactions occurring at the interface of PVDF-HFP membranes and Na metal. These reactions not only alter chemical compositions but also further affect the surface morphology and adhesive properties of membranes. Similar phenomena are observed in other polyfluoroalkyl-based membranes (PVDF and PTFE). Therefore, we systematically studied the reaction mechanisms between the Na metal and these polymers. The influence of different functional groups (−F, −CF 3 , −H) and their arrangement on the reaction extent has also been discussed. Finally, we concluded with the key factors driving these side reactions and provided new perspectives for designing polymers tailored for sodium-based batteries.

Interfacial side reactions↗

DOE OSTI2020

Hybrid Unilamellar Vesicles of Phospholipids and Block Copolymers with Crystalline Domains

Phospholipid (PL) membranes are ubiquitous in nature and their phase behavior has been extensively studied. Lipids assemble in a variety of structures and external stimuli can activate a quick switch between them. Amphiphilic block copolymers (BCPs) can self-organize in analogous structures but are mechanically more robust and transformations are considerably slower. The combination of PL dynamical behavior with BCP chemical richness could lead to new materials for applications in bioinspired separation membranes and drug delivery. It is timely to underpin the phase behavior of these hybrid systems and a few recent studies have revealed that PL–BCP membranes display synergistic structural, phase-separation, and dynamical properties not seen in pure components. One example is phase-separation in the membrane plane, which seems to be strongly affected by the ability of the PL to form lamellar phases with ordered alkyl chains. In this paper we focus on a rather less explored design handle which is the crystalline properties of the BCP component. Using a combination of confocal laser scanning microscopy and X-ray scattering we show that hybrid membranes of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-b-PCL) display BCP-rich and PL-rich domains when the BCP comprises crystalline moieties. The packing of the hydrophilic part of the BCP (PEG) favors mixing of DPPC at the molecular level or into nanoscale domains while semi-crystalline and hydrophobic PCL moieties bolster microscopic domain formation in the hybrid membrane plane

phase-separation↗

DOE OSTI2022

Laser diagnostics to characterize the in-flame growth of platinum nanoparticles manufactured by the reactive spray deposition technology

Reactive Spray Deposition Technology (RSDT) is an atmospheric pressure, flame-based advanced manufacturing method used to fabricate Membrane Electrode Assemblies (MEAs) for proton exchange fuel cells and water electrolyzers. RSDT combines the flame synthesis of catalyst nanoparticles and their deposition onto the membrane in one step. The properties of the synthesized nanoparticles, such as their Size Distribution Function (SDF), determine the manufactured electrodes’ performance, which can be evaluated when the deposition is complete via ex-situ characterization of the products. Efforts to improve RSDT for manufacturing state-of-the-art MEAs can be significantly enhanced with integrated laser diagnostics that enable in situ measurement of the synthesized catalyst nanoparticles. This paper reports the implementation of laser diagnostics in an RSDT facility and evaluates their potential to assist the manufacturing process. Laser Light Scattering (LS) and Laser-Induced Incandescence (LII) measurements are performed in the oxygen-rich zone of the flame at various distances from the flame fuel jet nozzle downstream of its luminous region. The measurements quantitatively track the evolution in size and volume fraction of platinum-based nanoparticles in two flames that yield different catalytic properties in the manufactured electrodes. The profiles of the measured nanoparticles’ volume fraction along the flame axis can be estimated a priori so that the average nanoparticle sizes can be measured in quasi-real time via LS. Nanoparticles experience an extremely slow growth rate while being convected at distances from 150 nm to 300 nm from the fuel nozzle. Complementary characterizations of the synthesized nanoparticles are performed ex-situ via High-Angle Annular Darkfield Scanning Transmission Electron Microscopy (HAADF-STEM) image analyses of samples collected on grids at a fixed distance from the fuel jet nozzle. Comparing the results from laser and microscopy techniques not only cross-validates the findings but also provides the parameters to infer the bimodal SDF in-situ and yields evidence that the coagulation efficiency of the synthesized nanoparticles has extremely low values in the investigated zone of the flames.

Rayleigh Light Scattering (LS)↗

DOE OSTI2022

Squeezing Out Interfacial Solvation: The Role of Hydrogen-Bonding in the Structural and Orientational Freedom of Molecular Self-Assembly

We report bioinspired membrane molecules with improved physical properties and enhanced stability can serve as functional models for conventional lipid or amphiphilic species. Importantly, these molecules can also provide new insights into emergent phenomena that manifest during self-assembly at interfaces. Here, we elucidate the structural response and mechanistic steps underlying the self-assembly of the amphiphilic, charged oligodimethylsiloxane imidazolium cation (ODMS-MIM+) at the air–aqueous interface using Langmuir trough methods with coincident surface-specific vibrational sum-frequency generation (SFG) spectroscopy. We find evidence for a new compression-induced desolvation step that precedes commonly known disordered-to-ordered phase transitions to form nanoscopic assemblies. The experimental data was supported by atomistic molecular dynamics (MD) simulations to provide a detailed mechanistic picture underlying the assembly and the role of water in these phase transitions. The sensitivity of the hydrophobic ODMS tail conformations to compression-owing to distinct water–ODMS interactions and tail–tail solvation properties-offers new strategies for the design of interfaces that can be further used to develop soft-matter electronics and low-dimensional materials using physical and chemical controls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Control of ternary alloy composition during remote epitaxy on graphene

Understanding the sticking coefficient σ, i.e., the probability of an adatom sticking to a surface, is essential for controlling the stoichiometry during epitaxial film growth. However, σ on monolayer graphene-covered surfaces and its impact on remote epitaxy are not understood. Here, using molecular-beam epitaxial growth of the magnetic shape memory alloy Ni 2 MnGa, we show that the sticking coefficients for metals on graphene-covered MgO (001) are less than one and are temperature and element dependent, as revealed by ion backscattering spectrometry and energy-dispersive x-ray spectroscopy. This lies in stark contrast with most transition metals sticking on semiconductor and oxide substrates, for which σ is near unity at typical growth temperatures (T < 800°C). By initiating growth below 400°C, where the sticking coefficients are closer to unity and wetting on the graphene surface is improved, we demonstrate the epitaxy of Ni 2 MnGa films with controlled stoichiometry that can be exfoliated to produce freestanding membranes. Straining these membranes tunes the magnetic coercive field. Finally, our results provide a route to synthesize membranes with complex stoichiometries whose properties can be manipulated via strain.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Elucidating the Role of Ionomer in the Performance of Platinum Group Metal-free Catalyst Layer via in situ Electrochemical Diagnostics

The ionomer content in platinum group metal (PGM)-free polymer electrolyte fuel cell (PEFC) cathode catalyst layer (CCL) plays an important role in the electrode gas transport properties, proton conductivity, and hence, membrane electrode assembly (MEA) performance. In this work, the ionomer content in the CCL is varied, influencing electrode microstructure by altering porosity, tortuosity, as well as ionomer distribution and coverage of the catalyst particles. A novel technique consisting of a H 2 pump, combined with a Pt black sensor layer, is used to measure the bulk mass transport resistance of a series of PGM-free CCL prepared with different ionomer contents. The values for bulk electrode mass transport resistance are contrasted with electrode proton transport resistance in the cathode catalyst layer, establishing a clearly defined trade-off between two key performance limiting phenomena and identifying a need for novel PGM-free electrode fabrication strategies.

25 ENERGY STORAGE↗

DOE OSTI2020

Photodamage and Repair in Higher Plant Photosynthesis (Final Technical Report)

Elucidation of the functional properties and structural organization of membrane protein complexes is one of the central objectives of current biochemical investigation. One of the most intriguing aspects of membrane protein function is its role in the mediation of energy transduction in photosynthetic organisms. Light energy, which is the product of a most violent physical process, fusion, is transformed into biological energy equivalents utilized by the photosynthetic cell. This photosynthetic process provides both the carbohydrate that lies at the base of virtually all food chains and, as a byproduct, all of the atmospheric oxygen utilized by heterotrophic organisms. The photosynthetic apparatus, however, is quite susceptible to damage by Reactive Oxygen Species (ROS). These species include O2 ·– , ·OH, H 2 O 2 and 1 O 2 . The production of ROS is an unavoidable byproduct of electron transport under aerobic conditions and these can damage lipids, nucleic acids and proteins. Our research has centered on the identification of amino acid oxidative damage which occurs in the vicinity of photosynthetic energy transfer cofactors. These cofactors participate in excitation energy transfer and linear electron transport within Photosystem II, the Cytochrome b 6 ƒ complex and Photosystem I. Additionally, we have participated in a number of productive collaborations leveraging our expertise in photosynthetic measurements and mass spectrometry to assist other investigators in their research.

59 BASIC BIOLOGICAL SCIENCES↗