Search NASA⌕ Search

SEARCH · Search NASA

Results for “molecular case study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Plasma decay in hydrocarbons and hydrocarbon- and H 2 O-containing mixtures excited by high-voltage nanosecond discharge at elevated gas temperatures

Plasma decay after a high-voltage nanosecond discharge was experimentally and numerically studied in pure hydrocarbons (C 2 H 6 and C 3 H 8 ), and H 2 O:N 2 and C 3 H 8 :O 2 mixtures for pressures in the range 2–4 Torr and gas temperatures from 300 to 600 K. In a stoichiometric C 3 H 8 :O 2 mixture, plasma decay was also studied in a repetitively pulsed discharge for varing numbers of discharge pulses (varying degrees of fuel oxidation). The rate of plasma decay was determined from the temporal evolution of electron density measured using the microwave interferometer. It was observed that gas heating to 600 K leads to a decrease in the rate of plasma decay in all cases. The effect of heating on plasma decay was most profound in the H 2 O:N 2 mixture (after a single discharge pulse) and in the C 3 H 8 :O 2 mixture for high degrees of fuel oxidation. A kinetic scheme was developed to numerically simulate the plasma decay in hydrocarbons and combustible mixtures. Numerical analysis showed that, under the conditions studied, plasma decay was controlled by dissociative electron recombination with simple molecular and cluster ions. Gas heating led to a decrease in the rate of the electron-ion recombination and the rate of conversion of molecular ions to cluster ions. As a result, the gas temperature increase caused a decrease in the fraction of cluster ions for which the recombination coefficients are an order of magnitude higher than the recombination coefficients for molecular ions. The influence of gas heating on the decrease of the amount of cluster ions was more important when the ion composition was dominated by hydrated H 3 O + (H 2 O) k ions. The rates of the formation of these ions are extremely sensitive to any variations in gas temperature. A result, in agreement with our observations, gas heating led to an anomalous decrease in the rates of plasma decay in the H 2 O:N 2 mixture, as well as in the C 3 H 8 :O 2 mixture when H 2 O molecules were produced due to fuel oxidation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

DNA Crystals as a Template for Patterned Functional Materials

DNA nanotechnology offers a wide toolkit of molecular functionalities and scales, including intricate motifs less than 10 nm and periodic structures exceeding 100 µm. At larger scales, however, there are often significant tradeoffs for DNA structures, namely stability and mechanical strength. This work describes the design, synthesis, and characterization of a functionalized DNA crystal. Using a ligated DNA crystal grants significant freedom for various functional materials to be applied, in this case, semiconducting cadmium sulfide and palladium metal. Properties investigated in this study include stability, mechanical strength, and optoelectronic properties such as photoluminescence (PL) and electric conductivity. Significant changes are observed based on the functional material applied to DNA crystals. The Young's modulus of the crystal varies by about five orders of magnitude when functionalized with palladium. PL and semiconductive behaviors were observed when cadmium sulfide was attached. These crystals represent an expansion of the capabilities of DNA structures at these length scales, and additionally a platform for future studies exchanging the materials or altering the ligation scheme.

CdS↗
DOE OSTI2025

Investigating the quaternary structure of a homomultimeric catechol 1,2-dioxygenase: An integrative structural biology study

The structural analysis of catechol 1,2 dioxygenase from Stutzerimonas frequens GOM2, SfC12DO, was conducted using various structural techniques. SEC-SAXS experiments revealed that SfC12DO, after lyophilization and reconstitution processes, can form multiple enzymatically active oligomers, including dimers, tetramers, and octamers. These findings differ from previous studies, which reported active dimers in homologous counterparts with available crystallographic structures, or trimers observed exclusively in solution for SfC12DO and its homologous isoA C12DO from Acinetobacter radioresistens under low ionic strength conditions. In some cases, tetramers were also reported, such as for the Rodococcus erythropolis C12DO. The combined results of Small-Angle X-ray Scattering, Dynamic Light Scattering, and Transmission Electron Microscopy experiments provided additional insights into these active oligomers’ shape and molecular organization in an aqueous solution. These results highlight the oligomeric structural plasticity of SfC12DO, proving that it can exist in different oligomeric forms depending on the physicochemical characteristics of the solutions in which the experiments were performed. Remarkably, regardless of its oligomeric state, SfC12DO maintains its enzymatic activity even after prior lyophilization. All these characteristics make SfC12DO a putative candidate for bioremediation applications in polluted soils or waters.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Ab initio Molecular Dynamics Beyond Density Functional Theory

The funding from this award supported the development of new theoretical methods that both increase the accuracy of quantum simulations beyond that of density functional theory, as well as reduce the cost of such simulations, for example, through machine learning and algorithmic improvements. The improvements lead to, in some cases, orders of magnitude increases in simulation speed as well as orders of magnitude increase in accuracy, compared to before this work was started. This translates to both greater certainty in making predictions about chemical phenomena that are currently studied computationally, as well as laying the ground-work for the study of new areas of chemistry that have not traditionally been simulated, because of the new time-scales and accuracies that can be reached.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Accurate energies for ππ* excited states via exchange scaling: the XS-CASSCF method

The state-averaged complete-active space self-consistent field method (SA-CASSCF) is a widely employed electronic structure method used for studying photochemistry and dynamics owing to its ability to provide a reliable description even of complicated cases while still retaining computational efficiency. However, SA-CASSCF suffers from one Achilles heel, related to the description of ionic ππ* excited states, whose energy is often overestimated by 1–2 eV. In light of this challenge, we present the XS-CASSCF method, a new approach based on the idea of exchange scaling (XS) that screens the involved energy terms to improve the excitation energies of singlet ionic ππ* states. First, we illustrate the power of the XS-CASSCF method using hexatriene and para-quinodimethane as examples, showing that it corrects the targeted ionic states while leaving the other states largely unaffected, giving root-mean-square errors (RMSE) below 0.2 eV for the four lowest states in both cases. Subsequently, XS-CASSCF vertical excitation energies are tested against theoretical best estimates for a set of 11 molecules and 56 excited states. XS-CASSCF performs exceptionally well for the ππ* states of hydrocarbons, reducing the RMSE over 21 excitation energies from 0.96 to 0.27 eV. In the challenging subset of molecules with heteroatoms and a larger number of ππ* and nπ* states, we find that improvements can also be obtained, albeit not as pronounced. We conclude with an outlook into more realistic molecular materials focusing on their singlet–triplet (S 1 /T 1 ) gaps, finding that significant improvements can be obtained along the whole range of S 1 /T 1 gaps studied, going from 0.1 eV to more than 1.5 eV. Owing to notable improvements across significant classes of molecules combined with its conceptual simplicity, we believe that XS-CASSCF is a promising addition to the electronic structure toolbox, serving both as a standalone electronic structure method and as a starting point for further correlated treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The energetics and dynamics of confinement in flexible frameworks and molecular confinement

Porous frameworks form the chemical and structural basis for critical technologies in separations, catalysis, nuclear waste containment and biomedical applications. Hundreds of zeolites and metal organic frameworks (MOFs) have been synthesized, and their ability to separate and store hydrogen, methane and carbon dioxide has been investigated both experimentally and theoretically. Nevertheless, a fundamental and systematic molecular-level understanding of the thermodynamic and structural factors governing the stability and guest-host interactions in these materials lags behind focused studies of specific systems. Because the guest molecules interact with each other and with the host framework, molecular confinement is a finely balanced and complex phenomenon. The ability of the guest molecules to bind and diffuse through the pores is determined by the nature of the host framework which, in turn, responds to the nature and concentration of guest molecules and to pressure and temperature. The work explores how framework flexibility, tailored by structure, composition, temperature and pressure, is a general phenomenon, similar in nature but variable in extent, in both zeolites and MOFs and is part of a free energy landscape in which framework-guest interactions, pressure, and temperature result in changes in framework geometry and, in some cases, phase transitions. These subtle and/or pronounced changes in lattice geometry, energetics, and dynamics can play a decisive role in confinement and in differentiating the binding of molecules of similar size. The free energy landscape created by these structural changes links polymorphism, amorphization, “breathing,” “gate opening” and confinement. Specifically, the generality of such behavior arises from commonalities in lattice dynamics and energetics of frameworks containing a combination of strong rigid bonds and weaker more flexible deformation modes. Identifying and describing these common and collective phenomena is the focus of the research on a selected group of zeolites and MOFs. Structural studies using X-ray and neutron diffraction explore the mechanical functionality of these important materials, specifically how framework materials respond to changes in temperature, pressure and guest loading. These structural studies are combined with calorimetric measurements, using techniques uniquely developed in the participating laboratories, of heats of formation, heat capacities and entropies, and guest-host interactions. The experimental thermodynamic studies are complemented by inelastic neutron scattering studies of the lattice dynamics related both to framework vibrations and to guest-host interactions. The report below summarizes the work done at UC Davis, which is complemented by work done at BYU (Woodfield) and Virginia Tech (Ross).

36 MATERIALS SCIENCE↗
DOE OSTI2022

The energetics and dynamics of confinement in flexible frameworks and molecular confinement

Porous frameworks form the chemical and structural basis for critical technologies in separations, catalysis, nuclear waste containment and biomedical applications. Hundreds of zeolites and metal organic frameworks (MOFs) have been synthesized, and their ability to separate and store hydrogen, methane and carbon dioxide has been investigated both experimentally and theoretically. Nevertheless, a fundamental and systematic molecular-level understanding of the thermodynamic and structural factors governing the stability and guest-host interactions in these materials lags behind focused studies of specific systems. Because the guest molecules interact with each other and with the host framework, molecular confinement is a finely balanced and complex phenomenon. The ability of the guest molecules to bind and diffuse through the pores is determined by the nature of the host framework which, in turn, responds to the nature and concentration of guest molecules and to pressure and temperature. The work explores how framework flexibility, tailored by structure, composition, temperature and pressure, is a general phenomenon, similar in nature but variable in extent, in both zeolites and MOFs and is part of a free energy landscape in which framework-guest interactions, pressure, and temperature result in changes in framework geometry and, in some cases, phase transitions. These subtle and/or pronounced changes in lattice geometry, energetics, and dynamics can play a decisive role in confinement and in differentiating the binding of molecules of similar size. The free energy landscape created by these structural changes links polymorphism, amorphization, “breathing,” “gate opening” and confinement. Specifically, the generality of such behavior arises from commonalities in lattice dynamics and energetics of frameworks containing a combination of strong rigid bonds and weaker more flexible deformation modes. Identifying and describing these common and collective phenomena is the focus of the research on a selected group of zeolites and MOFs. Structural studies using X-ray and neutron diffraction explore the mechanical functionality of these important materials, specifically how framework materials respond to changes in temperature, pressure and guest loading. These structural studies are combined with calorimetric measurements, using techniques uniquely developed in the participating laboratories, of heats of formation, heat capacities and entropies, and guest-host interactions. The experimental thermodynamic studies are complemented by inelastic neutron scattering studies of the lattice dynamics related both to framework vibrations and to guest-host interactions. This research was a collaboration between UC Davis (A. Navrotsky) BYU (B. Woodfield) and Virginia Tech (N. Ross).

36 MATERIALS SCIENCE↗
DOE OSTI2024

Insight into the Competitive Adsorption Behavior of Polymer Chains in Silica Nanopores by Small-Angle Neutron Scattering

Processive hydrogenolysis catalysts, in which a metal nanoparticle (e.g., Pt) embedded at the bottom of a cylindrical silica nanopore can repeatedly cleave polymer chains and produce value-added hydrocarbon products, offer a potential solution for billions of tons of waste plastics. As the chain stays longer near the Pt catalysts, it would have a higher chance of getting cut, and therefore the molecular weight distribution of the product could be affected by the adsorption behavior of virgin chains (long polymers) versus cleaved chains (short polymers) into the nanopores. Further, this work reports a model study to understand the competitive adsorption behavior of the two different molecular weight polymers that are mixed, mimicking the reaction medium in the intermediate stage of the catalytic reaction. This study employs small-angle neutron scattering (SANS), which takes advantage of contrast differences between hydrogenous and deuterated polystyrenes to experimentally observe the relative composition of the two polymers in the silica nanopores. Our results reveal preferential adsorption of longer chains in the silica nanopores, which is consistent with the theoretical prediction in the literature for the case of the enthalpic attraction between polymers and pore walls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multicopy suppressor screens reveal convergent evolution of single-gene lysis proteins

Single-strand RNA (ssRNA) Fiersviridae phages cause host lysis with a product of single gene (sgl for single-gene lysis; product Sgl) that induces autolysis. Many different Sgls have been discovered, but the molecular targets of only a few have been identified. In this study, we used a high-throughput genetic screen to uncover genome-wide host suppressors of diverse Sgls. In addition to validating known molecular mechanisms, we discovered that the Sgl of PP7, an ssRNA phage of Pseudomonas aeruginosa, targets MurJ, the flippase responsible for lipid II export, previously shown to be the target of the Sgl of coliphage M. These two Sgls, which are unrelated and predicted to have opposite membrane topology, thus represent a case of convergent evolution. We extended the genetic screens to other uncharacterized Sgls and uncovered a common set of multicopy suppressors, suggesting that these Sgls act by the same or similar mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Subtle penetrant size effects on separation of carbon molecular sieve membranes derived from $\mathrm{6FDA:BPDA}$-$\mathrm{DAM}$ polyimide

Economically scalable carbon molecular sieve (CMS) hollow fiber membranes rely upon a tunable bimodal pore morphology to separate gas pairs using angstrom-level size discrimination. Freshly formed CMS membranes experience self-retarding physical aging, reflected by permeance losses and selectivity gains that stabilize over short times compared to the lifetime of the membrane. Self-retarding morphology rearrangements are of special interest here due to tightening of the largest size range of ultramicropores, thereby causing aging for polyimide-derived CMS. We report effects of such aging for two A/B penetrant pairs, C 3 H 6 /C 3 H 8 and CO 2 /CH 4 . These two pairs not only have different average sizes, $\overline{d}_{A/B}$, but also different size differences,Δd A/B , between the members in each pair. We focus primarily on the C 3 H 6 /C 3 H 8 pair, which is the most difficult of the two pairs to separate, and use some CO 2 /CH 4 results as a comparison case. We study CMS derived from 6FDA:BPDA-DAM (1:1) polyimide by pyrolysis at 550 °C, 600 °C and 650 °C. Here we suggest conditions and physical causes that expedite, retard or even suppress the aging process within CMS membranes. Finally, we suggest how analysis of CMS derived from other precursors and other penetrant pairs can be generalized by understanding the results for the 6FDA:BPDA-DAM (1:1) polyimide derived CMS.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tribological studies of a novel high-performance aromatic thermosetting copolyester containing carbon nanotubes for artificial hip joints

A high-performance aromatic thermosetting copolyester containing multi-walled carbon nanotubes (ATSP-MWNTs) was synthesized, characterized, and tribologically tested against cobalt-chromium-molybdenum (CoCrMo) alloy) as a potential replacement for ultra-high molecular weight polyethylene (UHMWPE) in artificial joints. By investigating the tribological properties of ATSP-MWNTs, crosslinked UHMWPE vs CoCrMo alloy, it was found that ATSP-MWNTs exhibited a lower and more stable friction coefficient and negligible wear. Further, unlike the case of ATSP-MWNTs, an obvious wear was present for UHMWPE. It is believed that transfer films in ATSP-MWNTs help to stabilize and decrease friction and wear. In addition, large and aggregated particles of UHMWPE seem to contribute to an increase in friction and wear.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

General, Rigorous Approach for the Treatment of Interfragment Covalent Bonds

Here, a generalized, projection-based transformation of the method-agnostic Fock operator in various ab initio fragment-based quantum chemistry methods has been developed for the treatment of interfragment covalent bonds. This transformation freezes the relevant localized molecular orbital associated with each interfragment bond, thereby restricting the variational subspace of the fragment wave functions, in order to maintain the proper physical characteristics of the involved covalent bonds. In addition, sets of orbitals that would lead to multiple occupancy of certain orbitals are explicitly removed from the variational space. The transformation is developed for the specific case of mutually orthonormal frozen and unfrozen orbitals within each fragment. The newly developed approach is then used to study model systems with two popular ab initio fragment-based methods, and the results of these calculations are compared to those obtained by existing methodologies. Analysis is focused on both quantitative and qualitative accuracy as well as computational scalability and stability. Other methods for which the developed formalisms are appropriate are outlined, and future extensions of the methods are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure of the antenna complex expressed during far-red light photoacclimation in Synechococcus sp. PCC 7335

Far-red light photoacclimation, or FaRLiP, is a facultative response exhibited by some cyanobacteria that allows them to absorb and utilize lower energy light (700–800 nm) than the wavelengths typically used for oxygenic photosynthesis (400–700 nm). During this process, three essential components of the photosynthetic apparatus are altered: photosystem I, photosystem II, and the phycobilisome. In all three cases, at least some of the chromophores found in these pigment–protein complexes are replaced by chromophores that have red-shifted absorbance relative to the analogous complexes produced in visible light. Recent structural and spectroscopic studies have elucidated important features of the two photosystems when altered to absorb and utilize far-red light, but much less is understood about the modified phycobiliproteins made during FaRLiP. We used single-particle, cryo-EM to determine the molecular structure of a phycobiliprotein core complex comprising allophycocyanin variants that absorb far-red light during FaRLiP in the marine cyanobacterium Synechococcus sp. PCC 7335. The structure reveals the arrangement of the numerous red-shifted allophycocyanin variants and the probable locations of the chromophores that serve as the terminal emitters in this complex. It also suggests how energy is transferred to the photosystem II complexes produced during FaRLiP. The structure additionally allows comparisons with other previously studied allophycocyanins to gain insights into how phycocyanobilin chromophores can be tuned to absorb far-red light. These studies provide new insights into how far-red light is harvested and utilized during FaRLiP, a widespread cyanobacterial photoacclimation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Detecting Atmospheric Molecules of Nontransiting Temperate Terrestrial Exoplanets Using High-resolution Spectroscopy in the Mid-infrared Domain

Motivated by the development of high-dispersion spectrographs in the mid-infrared (MIR) range, we study their application to the atmospheric characterization of nearby nontransiting temperate terrestrial planets around M-type stars. We examine the detectability of CO{sub 2}, H{sub 2}O, N{sub 2}O, and O{sub 3 }features in high-resolution planetary thermal emission spectra at 12–18 μm assuming an Earth-like profile and a simplified thermal structure. The molecular line width of such planets can be comparable to or broader than the Doppler shift due to the planetary orbital motion. Given the likely difficulty in knowing the high-resolution MIR spectrum of the host star with sufficient accuracy, we propose observing the target system at two quadrature phases and extracting the differential spectra as the planetary signal. In this case, the signals can be substantially suppressed compared with the case where the host star spectrum is perfectly known, as some parts of the spectral features do not remain in the differential spectra. Despite this self-subtraction, the CO{sub 2} and H{sub 2}O features of nearby (≲5 pc) systems with mid-/late-M host stars would be feasible with a 6.5 m class cryogenic space telescope, and orbital inclination could also be constrained for some of them. For CO{sub 2} and N{sub 2}O in a 1 bar Earth-like atmosphere, this method would be sensitive when the mixing ratio is 1–10{sup 3} ppm. The detectability of molecules except O{sub 3} is not significantly improved when the spectral resolution is higher than R≳10,000, although the constraint on the orbital inclination is improved. This study provides some benchmark cases useful for assessing the value of MIR high-resolution spectroscopy in terms of characterization of potentially habitable planets.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Exon disruptive variants in Populus trichocarpa associated with wood properties exhibit distinct gene expression patterns

Abstract Forest trees may harbor naturally occurring exon disruptive variants (DVs) in their gene sequences, which potentially impact important ecological and economic phenotypic traits. However, the abundance and molecular regulation of these variants remain largely unexplored. Here, 24,420 DVs were identified by screening 1014Populus trichocarpafull genomes. The identified DVs were predominantly heterozygous with allelic frequencies below 5% (only 26% of DVs had frequencies greater than 5%). Using common garden‐grown trees, DVs were assessed for gene expression variation in the developing xylem, revealing that their gene expression can be significantly altered, particularly for homozygous DVs (in the range of 27%–38% of cases depending on the studied common garden). DVs were further investigated for their correlations with 13 wood quality traits, revealing that, among the 148 discovered DV associations, 15 correlated with more than one wood property and six genes had more than one DV in their coding sequences associated with wood traits. Approximately one‐third of DVs correlated with wood property variation also showed significant gene expression variation, confirming their non‐spurious impact. These findings offer potential avenues for targeted introduction of homozygous mutations using tree biotechnology, and while the exact mechanisms by which DVs may directly influence wood formation remain to be unraveled, this study lays the groundwork for further investigation.

Genetics & Heredity↗
DOE OSTI2023

Photochemistry sample sticks for inelastic neutron scattering

Every material experiences atomic and molecular motions that are generally termed vibrations in gases and liquids or phonons in solid state materials. Optical spectroscopy techniques, such as Raman, infrared absorption spectroscopy, or inelastic neutron scattering (INS), can be used to measure the vibrational/phonon spectrum of ground state materials properties. A variety of optical pump probe spectroscopies enable the measurement of excited states or elucidate photochemical reaction pathways and kinetics. So far, it has not been possible to study photoactive materials or processes in situ using INS due to the mismatch between neutron and photon penetration depths, differences between the flux density of photons and neutrons, cryogenic temperatures for INS measurements, vacuum conditions, and a lack of optical access to the sample space. These experimental hurdles have resulted in very limited photochemistry studies using INS. Here we report on the design of two different photochemistry sample sticks that overcome these experimental hurdles to enable in situ photochemical studies using INS, specifically at the VISION instrument at Oak Ridge National Laboratory. We demonstrate the use of these new measurement capabilities through (1) the in situ photodimerization of anthracene and (2) the in situ photopolymerization of a 405 nm photoresin using 405 nm excitation as simple test cases. Furthermore, these new measurement apparatus broaden the science enabled by INS to include photoactive materials, optically excited states, and photoinitiated reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dissociation-induced depletion of high-energy reactant molecules as a mechanism for pressure-dependent rate constants for bimolecular reactions

In 1922, Lindemann proposed the now-well-known mechanism for pressure-dependent rate constants for unimolecular reactions: reactant molecules with sufficiently high energies dissociate more quickly than collisions can reestablish the Boltzmann distribution of the internal energies of the molecule during its dissociation at low pressures – yielding pressure-dependent rate constants for unimolecular reactions due to the preferential depletion of the high energy states capable of dissociation. In the last century, incredible progress has been made in achieving a far greater understanding of and quantitative predictions for unimolecular and association reactions. In the modern era, pressure-dependent phenomenological rate constants are now nearly universally used to describe the rates of unimolecular and associative reactions in phenomenological kinetic modeling. However, there is a second, more indirect, implication of Lindemann’s mechanism that relates to how these dissociation-induced non-equilibrium distributions impact bimolecular reactions, including non-associative bimolecular reactions – which are generally not considered to have pressure-dependent rate constants. Yet, as we show herein, the same high energy states depleted due to dissociation would otherwise react most rapidly in high-activation-energy bimolecular reactions – yielding a mechanism for pressure-dependent rate constants for bimolecular reactions (including non-associative reactions). Here, we present results from a case study for CH 2 O dissociation, isomerization, and bimolecular reaction with O2 to explore this question. Results from our master equation calculations indicate that the effect of dissociation-induced non-equilibrium distributions on bimolecular reactions can be substantial – even when chemical timescales are well separated from internal energy relaxational timescales (i.e. when the traditional rate constant description would be thought to apply). This effect is found to be more pronounced – and more complex – for bimolecular reactions involving molecular entities whose chemical timescales are merged with the internal energy relaxational timescales. Lastly, we present some ideas for discussion regarding what should be considered as “chemical species” in phenomenological kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Atomic Layer Deposition for Materials-Based H2 Storage: Opportunities and Limitations

The transportation demands in our growing hydrogen (H2) economy requires robust storage systems. The current commercially implemented technology in fuel cell cars relies on the well-established technology of hydrogen gas compressed to 350-700 bar, depending on the application. The compressed gas tanks in use today are bulky and cost intensive. To address this challenge, material-based storage is one of the long-term alternatives considered and constitutes the focus of this talk. Material-based storage is broadly defined as hydrogen bound to solid materials, with its binding strength varying from physisorption to porous materials, such as zeolites and metal organic frameworks, to chemisorption in (complex) metal hydrides. The ultimate targets set by the U.S. Department of Energy for this technology include a system gravimetric capacity of 6.5 wt% and volumetric capacity of 40 g/L at 100 bar, operating temperatures ranging between -40 C and +40 C and adsorption/desorption timescales of < 5 min. Storage in the form of physisorbed or chemisorbed hydrogen has guided the materials research, which metal- organic framework and (complex) metal hydrides being the most promising materials classes. A variety of these materials have met one or more of the targets, but it has remained elusive for a single material system to meet all these stringent requirements. Nano-encapsulation and low-concentration chemical additives have previously been employed separately to overcome such challenges. Functionalization via atomic layer deposition (ALD), however, offers unique characteristics that make it suitable for both, nano-encapsulation and "doping" with low-concentration additives. This deposition technique has sub-monolayer thickness control, is highly conformal in high-surface area materials and is self-limiting, i.e., once the gas-phase precursor reacts with the available surface sites, the surface reactions stop. In this presentation, we will showcase examples where ALD, more generally vapor-phase functionalization, on (complex) metal hydrides and organic frameworks has improved the material properties for H2 storage. In our first study, Al2O3 was deposited on magnesium borohydride, Mg(BH4)2, at room temperature using trimethylaluminum (TMA) and water. From our findings, encouraging initial results were obtained: the H2 desorption temperature was lowered by 60-120 degrees C, the desorbed gravimetric H2 capacity at temperatures < 250 degrees C was doubled, and the desorption kinetics increased by a factor of ~6 compared to uncoated Mg(BH4)2. However, hydrolysis reactions caused by residual surface -OH groups from the ALD water-pulse degraded the sample substantially. Through this study, the use of TMA was observed to be highly reactive with the Mg(BH4)2 surface species, leading to the strategy of exposing the sample only to TMA. The relative mole fraction of the vapor-phase additive can be precisely controlled with the number of TMA pulses and pulse duration. By tuning these parameters, we show in our second study that 10 pulses of TMA at ambient conditions were able to decrease the H2 desorption temperature by ~100 degrees C while retaining <95 % of its H2 capacity. We applied this approach with other additives such as BBr3, TiCl4 and tetrahydrofuran, and demonstrate that this unique approach opens the door to a new class of molecular additives and catalysts which cannot easily be introduced with conventional mechano-chemical or solvent-based techniques for (complex) metal-hydrides. In the case of metal organic frameworks, ALD is a promising technique to functionalize the pores with metal atoms or functional groups able to tune the gas selectivity and binding energy, for which ~15 kJ/mol has been established as the optimal value for H2 storage in sorbent materials. Vapor-phase techniques such as ALD have numerous benefits over other functionalization tools for H2 storage materials opening innumerable opportunities to the field. To exploit these opportunities, the current limitations on room temperature and water-less ALD processes needs to be overcome which will greatly expand the possibilities of encapsulation and incorporation of additives for organic frameworks and (complex) metal hydrides.

atomic layer deposition↗