Search NASA⌕ Search

SEARCH · Search NASA

Results for “moss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Spinning mode acoustic radiation from the flight inlet

A mathematical model was developed for spinning mode acoustic radiation from a thick wall duct without flow. This model is based on a series of experiments (with and without flow). A nearly pure azimuthal spinning mode was isolated and then reflection coefficients and far field pressure (amplitude and phase) were measured. In our model the governing boundary value problem for the Helmholtz equation is first converted into an integral equation for the unknown acoustic pressure over a disk, S1, near the mouth of the duct and over the exterior surface, S2, of the duct. Assuming a pure azimuthal mode excitation, the azimuthal dependence is integrated out which yields an integral equation over the generator C1 of S1 and the generator C2 of S2. The sound pressure on C1 was approximated by a truncated modal expansion of the interior acoustic pressure. Piecewise linear spline approximation on C2 was used.

Moss, W. F.↗
NASA NTRS1984

Direct simulation of transitional flow for hypersonic reentry conditions

This paper presents results of flowfield calculations for typical hypersonic reentry conditions encountered by the nose region of the Space Shuttle Orbiter. Most of the transitional flow regime is covered by the altitude range of 150 to 92 km. Calculations were made with the Direct Simulation Monte Carlo (DSMC) method that accounts for translational, rotational, vibrational, and chemical nonequilibrium effects. Comparison of the DSMC heating results with both Shuttle flight data and continuum predictions showed good agreement at the lowest altitude considered. However, as the altitude increased, the continuum predictions, which did not include slip effects, departed rapidly from the DSMC results by overpredicting both heating and drag. The results demonstrate the effects of rarefaction on the shock and the shock layer, along with the extent of the slip and temperature jump at the surface. Also, the sensitivity of the flow structure to the gas-surface interaction model, thermal accommodation, and surface catalysis are studied.

Moss, J. N.↗
NASA NTRS1984

Convective and radiative heating of a Saturn entry probe

The extent of convective and radiative heating for a Saturn entry probe is investigated in the absence and presence of ablation mass injection. The flow in the shock layer is assumed to be axisymmetric, viscous and in local thermodynamic equilibrium. The importance of chemical nonequilibrium effects for both the radiative and convective nonblowing surface heating rates is demonstrated for prescribed entry conditions. Results indicate that the nonequilibrium chemistry can significantly influence the rate of radiative heating to the entry probes. With coupled carbon-phenolic ablation injection, the convective heating rates are reduced substantially. Turbulence has little effect on radiative heating but it increases the convective heating considerably.

Tiwari, S. N.↗
NASA NTRS1984

Surface-slip equations for low-Reynolds-number multicomponent gas flows

Equations have been obtained for jump (or slip) in the wall values of species concentration, pressure, velocity, and temperature for the low-Reynolds-number high-altitude flight regime of a space vehicle. The analysis, based on the Chapman-Enskog method as applied by Shidlovskiy for a single-species gas, includes multicomponent diffusion with finite-rate surface catalytic recombination. A consistent set of equations is provided for multicomponent, binary, and single species mixtures.

Gupta, R. N.↗
NASA NTRS1984

Surface-slip equations for low-Reynolds-number multicomponent gas flows

Equations have been obtained for jump (or slip) in the wall values of species concentration, pressure, velocity, and temperature for the low-Reynolds-number high-altitude flight regime of a space vehicle. The analysis, based on the Chapman-Enskog method as applied by Shidlovskiy for a single-species gas, includes multicomponent diffusion with finite-rate surface catalytic recombination. A consistent set of equations is provided for multicomponent, binary, and single species mixtures.

Gupta, R. N.↗
NASA NTRS1984

Aerothermodynamic environment and thermal protection for a Titan aerocapture vehicle

This paper presents thermal protection system (TPS) requirements for a potential Titan aerocapture vehicle. Shock-layer solutions are obtained for a nominal trajectory through the current Titan model atmosphere. Fully laminar and fully turbulent solutions are presented along the blunted fore-cone in the windward symmetry plane of a bent-biconic vehicle. Using these solutions to define the aerothermodynamic environment, transient material-response solutions are obtained for a Galileo-type TPS with a carbon-phenolic ablator heat shield. Shock-layer results indicate that turbulent flow is the more realistic flow condition. They also show that the lengthy aerocapture heating pulse is dominated by convective heating. The TPS results show that the required insulation thickness is uniformly about 4 cm along the fore-cone because of the long heat-soak period. The total heat-shield thickness is 6.4 cm at the stagnation point, and 4.7 cm near the end of the fore-cone. These TPS requirements are greater than those presented in a previous Titan aerocapture study.

Green, M. J.↗
NASA NTRS1985

Surface-slip equations for multicomponent nonequilibrium air flow

Equations are presented for the surface-slip (or jump) values of species concentration, pressure, velocity, and temperature in the low-Reynolds number, high-altitude flight regime of a space vehicle. The equations are obtained from closed form solutions of the mass, momentum, and energy flux equations using the Chapman-Enskog velocity distribution function. This function represents a solution of the Boltzmann equation in the Navier-Stokes approximation. The analysis, obtained for nonequilibrium multicomponent air flow, includes the finite-rate surface catalytic recombination and changes in the internal energy during reflection from the surface. Expressions for the various slip quantities were obtained in a form which can be employed in flowfield computations. A consistent set of equations is provided for multicomponent, binary, and single species mixtures. Expression is also provided for the finite-rate, species-concentration boundary condition for a multicomponent mixture in absence of slip.

Gupta, R. N.↗
NASA NTRS1985

Monte Carlo simulations in support of the Shuttle upper atmospheric mass spectrometer experiment

This paper presents the results of calculations obtained with a Direct Simulation Monte Carlo (DSMC) method that describes both the external flow about the nose region of the Shuttle Orbiter and the internal flow in an inlet tube that provides the initial path between the shock-processed gases and a mass spectrometer mounted inside the Orbiter. A dedicated, three-dimensional version of the DSMC was developed during this study for the internal flow simulation along with the procedure for interfacing the external and internal flows. The calculations span the 140 to 95 km altitude range, which includes most of the hypersonic transitional flow encountered during reentry. All calculations were for a multicomponent gas mixture consisting of five chemical species while simulating the effects of transitional, rotational, vibrational, and chemical nonequilibrium. The results of the calculations show that within the entry region of the inlet tube where the gas has equilibrated with the sidewall tube temperature, the pressure is substantially less than the pressure at the external surface. This pressure correction for the entry region is significant for all conditions investigated and increases with altitude. The results highlight the structure of both the external and internal flow. Results of parametric studies show the sensitivity of the equilibrated inlet sidewall pressure to mass flow rates, gas-surface reflection model, tube side-wall temperature variations, and surface recombinations.

Moss, J. N.↗
NASA NTRS1985

Slip-boundary equations for multicomponent nonequilibrium airflow

Equations are presented for the surface-slip (or jump) values of species concentration, pressure, velocity, and temperature in the low Reynolds number, high-altitude flight regime of a space vehicle. These are obtained from closed-form solutions of the mass, momentum, and energy flux equations by using the Chapman-Enskog velocity distribution function. This function represents a solution of the Boltzmann equation in the Navier-Stokes approximation. The analysis, obtained for nonequilibrium multicomponent airflow, includes the finite-rare surface catalytic recombination and changes in the internal energy during reflection from the surface. Expressions for the various slip quantities have been obtained in a form which can readily be employed in flow-field computations. A consistent set of equations is provided for multicomponent and binary mixtures and single-species gas. An expression is also provided for the finite-rate species-concentration boundary condition for a multicomponent mixture in the absence of slip.

Gupta, R. N.↗
NASA NTRS1986

Direct simulation of hypersonic flows over blunt slender bodies

Results of a numerical study of low-density hypersonic flow about cylindrically blunted wedges and spherically blunted cones with body half angles of 0, 5, and 10 deg are presented. Most of the transitional flow regime encountered during entry between the free molecule and continuum regimes is simulated for a reentry velocity of 7.5 km/s by including freestream conditions of 70 to 100 km. The bodies are at zero angle of incidence and have diffuse and finite catalytic surfaces. Translational, thermodynamic, and chemical nonequilibrium effects are considered in the numerical simulation by utilizing the direct simulation Monte Carlo (DSMC) method. The numerical simulations show that noncontinuum effects such as surface temperature jump, and velocity slip are evident for all cases considered. The onset of chemical dissociation occurs at a simulated altitude of 96 km for the two-dimensional configurations. Comparisons between the DSMC and continuum viscous shock-layer calculations highlight the significant difference in flowfield structure predicted by the two methods.

Moss, J. N.↗
NASA NTRS1986

Collocation for an integral equation arising in duct acoustics

A mathematical model is developed to describe the effect of aircraft-engine inlet geometry on the reflected and radiated acoustic field without flow, as studied experimentally using a spinning-mode synthesizer by Silcox (1983). The acoustic pressure in the inlet interior and exterior is modeled by a pure cylindrical azimuthal mode for the Helmholtz equation with hardwall boundary and by the Helmholtz equation and the radiation condition at infinity, respectively. The analytical approach to the solution of the resulting boundary-value problem and the program implementation are explained; numerical results are presented in tables and graphs; and the uniqueness of the problem is demonstrated.

Moss, W. F.↗
NASA NTRS1986

Thermophysical aspects of re-entry flows

The present conference discusses low density aerothermodynamics, the drag of bodies in rarefied hypersonic flow, transitional hypervelocity aerodynamic simulation and scaling, high temperature kinetics and transport properties, electron-nitrogen molecule collisions in high temperature nonequilibrium air, theoretical studies of dissociative recombination, the transport properties of some atom/ion interactions in air, and the interaction energies, dipole transition moments, and transport cross sections of N(+)-N and O(+)-O. Also discussed are the results of studies of potential fluid mechanisms for enhanced stagnation heating, vortex-induced leeward heating on a biconic at Mach 6 and 10, the effects of surface discontinuities on convective heat transfer in hypersonic flow, computational convergence in chemical reacting flows, and three-dimensional viscous shock layer applications for the Space Shuttle Orbiter.

Moss, J. N.↗
NASA NTRS1986

Direct simulation of hypersonic transitional flow

A review of recent calculations obtained with Bird's direct simulation Monte Carlo (DSMC) method are presented for the transitional flowfield encountered at reentry conditions. Consequently, the emphasis is to simulate the real-gas effects resulting from a highly energetic nonequilibrium flow. The DSMC calculations for both wide-angle and slender bodies are compared with experimental and continuum calculations. The wide angle body calculations simulate the windward nose of the Shuttle Orbiter and projected aeroassisted orbital transfer vehicles. For the slender, blunted configurations, both two-dimensional and axisymmetric results are presented. Comparisons between the DSMC and continuum calculations show the altitude range where differences in flowfield structure and surface quantities become significant.

Moss, J. N.↗
NASA NTRS1986

Imagery with a Si:Bi 16 x 16 array

A description of the design and performance of an imaging spectrometer intended for operation in the 7 to 14 micron wavelength range is presented. It is based upon a 16 by 16 element Si:Bi hybrid array, a circular variable filter wheel, and a microcomputer data acquisition system. The spatial-spectral photometric performances were evaluated in the laboratory as well as field tested at astronomical observatories. The performance characteristics of the system are presented as well as laboratory and astronomical images.

Goebel, J. H.↗
NASA NTRS1987

Analytical and experimental investigation of mistuning in propfan flutter

An analytical and experimental investigation of the effects of mistuning on propfan subsonic flutter was performed. The analytical model is based on the normal modes of a rotating composite blade and a three-dimensinal subsonic unsteady lifting surface aerodynamic theory. Theoretical and experimental results are compared for selected cases at different blade pitch angles, rotational speeds, and free-stream Mach numbers. The comparison shows a reasonably good agreement between theory and experiment. Both theory and experiment showed that combined mode shape, frequency, and aerodynamic mistuning can have a beneficial or adverse effect on blade damping depending on Mach number. Additional parametric results showed that alternative blade frequency mistuning does not have enough potential for it to be used as a passive flutter control in propfans similar to the one studied. It can be inferred from the results that a laminated composite propfan blade can be tailored to optimize its flutter speed by selecting the proper ply angles.

Kaza, Krishna Rao V.↗
NASA NTRS1987

Dynamic characteristics of single crystal SSME blades

The Space Shuttle Main Engine (SSME) High Pressure Fuel Turbopump (HPFTP) blades are currently manufactured using a directionally solidified (DS) material, MAR-M-246+Hf. However, a necessity to reduce the occurrence of fatigue cracking within the DS blades has lead to an interest in the use of a single crystal (SC) material, PWA-1480. A study was initiated to determine the dynamic characteristics of the HPFTP blades made of SC material and find possible critical engine order excitations. This study examined both the first and second stage drive turbine blades of the HPFTP. The dynamic characterization was done analytically as well as experimentally. The analytical study examined the SC first stage HPFTP blade dynamic characteristics under typical operating conditions. The blades were analyzed using MSC/NASTRAN and a finite element model. Two operating conditions, 27500 RPM and 35000 RPM, were investigated.

Moss, L. A.↗
NASA NTRS1987

SSME single crystal turbine blade dynamics

A study was performed to determine the dynamic characteristics of the Space Shuttle main engine high pressure fuel turbopump (HPFTP) blades made of single crystal (SC) material. The first and second stage drive turbine blades of HPFTP were examined. The nonrotating natural frequencies were determined experimentally and analytically. The experimental results of the SC second stage blade were used to verify the analytical procedures. The analytical study examined the SC first stage blade natural frequencies with respect to crystal orientation at typical operating conditions. The SC blade dynamic response was predicted to be less than the directionally solidified blade. Crystal axis orientation optimization indicated the third mode interference will exist in any SC orientation.

Moss, Larry A.↗