Search NASA⌕ Search

SEARCH · Search NASA

Results for “multimode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Interactive multi-spectral analysis of more than one Sonrai village in Niger, West Africa

Use of LANDSAT data and an interaction system is considered for identifying and measuring small scale compact human settlements (villages) for demographic and anthropological studies. Because village components are not uniformly distributed within any one village, they apparently are multimodal, spectrally. Therefore, the functions of location and enumeration are kept separate. Measurement of a known village is compared with CCT response.

Reining, P.↗

The period-pulse-width distribution of pulsars and their division into three classes

The period-pulse-width (P-W) distribution of sample of 41 pulsars has been reanalyzed under two versions of a model where radiation is beamed from magnetic polar caps which are isotropically oriented with respect to the rotation axis of the neutron stars (IOPC models). It is found that neither IOPC model can explain the P-W distribution of the entire sample. Pulsars with simple unimodal (U) or complicated multimodal (M) pulse shapes show significantly different P-W distributions. Class M pulsars have a narrower P-W distribution than do class U pulsars and, taken separately, are compatible with either IOPC model. Class U pulsars divide into two subgroups, those with relatively narrower pulses (UN) and those with relatively wider pulses (UW), each of which is compatible with either IOPC model. One interpretation of these results is that the pulsars in classes UN, M, and UW have different intrinsic beam sizes, roughly in the ratios 1:2:4, respectively. The possible origins of the three classes are discussed in terms of the force-balance magnetosphere model (Roberts et al., 1972, 1973), where the differences may be attributed to different-mass neutron stars and the structure of the polar caps. An alternative interpretation is that the angle between the rotation and emission axes is not isotropically distributed, but can take only certain preferred values.

Roberts, D. H.↗

A new interpretation of luminous blue stars

A major revision of current theoretical ideas about the brightest blue stars must be made if Carson's (1976) radiative opacities are adopted in stellar models. Unlike earlier opacities, these exhibit a large 'bump' due to CNO ionization, which leads to very strong central condensation, convective instability, and pulsational instability in hot diffuse stellar envelopes. Despite a number of theoretical uncertainties, the new picture of the structure of very luminous stars is reasonably successful in accounting for a variety of previously unexplained observations. The stellar models for the phase of core hydrogen burning predict large radii and rather cool effective temperatures for O stars and a spreading out of the main-sequence band in the H-R diagram toward luminous cool supergiants for masses higher than about 20 solar masses. In massive X-ray binary systems, circular orbits and supergiant-like visual companions are expected to be quite common. Long-period variability is predicted to exist for massive blue supergiants of luminosity class Ia. The models for helium stars predict large radii and rather cool effective temperatures for Wolf-Rayet stars, as well as multimodal pulsational instability and, possibly, surface turbulence for these stars.

Stothers, R.↗

Non-linear propagation of complex sound fields in rectangular ducts. I - The self-excitation phenomenon

Nonlinear acoustic interactions at the second order (so-called weak interactions) of the perturbation scheme have been recognized for a long time. This paper examines the possibility of stronger interactions at the first order which are found in rigid rectangular ducts and to a lesser degree in slightly soft rectangular ducts. The strong interactions occur if any two modes have identical phase speeds, the case of multimode and multifrequency input for example. An important consequence of the strong interaction is the self-generation of subharmonics. Even a small amount of subharmonic can, given the right phase conditions, grow through a strong interaction with a higher harmonic.

Vaidya, P. G.↗

Analytical model of the combustion of multicomponent solid propellants

Multiple flame models derived for simple composite propellants are extended to describe the combustion of propellants containing multimodal particle sizes, mixed oxidizers and monopropellant binders. Models combining the component contributions to propellant surface structure, flame structure and energy distribution are based in part upon experimental observations and in part upon hypotheses constrained to provide reasonable agreement with measured burning rate characteristics. The methods employed consist of superposition, interaction and iteration. The computerized model is applied to explain the effects of multiple ingredients and to discuss burning rate tailoring problems of current interest.

Cohen, N. S.↗

Optically activated switch/modulator using a photoconductor and two channel waveguides

An optically activated switch was fabricated on LiNbO3 substrate by deposition of photoconductor-metal electrode structure on two channel waveguides obtained by the outdiffusion process. One waveguide was overcoated with a CdS film, and served as a light detector which converted the optical signal in that waveguide into an electric signal. Utilizing the electrooptic effect, this electric signal modulated the light propagating in the second waveguide by changing the refractive index, and the cutoff condition, of the waveguiding channel between two metal electrodes. The waveguides in the optically controlled switch can be either single or multimode. The length of the device can be short in comparison with other switching schemes. When binary optical signals are applied to the two waveguides, the switch can perform logic AND, NEGATION, OR and pseudo-amplification operations.

Goldberg, L.↗

A finite element simulation of sound attenuation in a finite duct with a peripherally variable liner

Using multimodal analysis, a variational finite element method is presented for analyzing sound attenuation in a three-dimensional finite duct with a peripherally variable liner in the absence of flow. A rectangular element, with cubic shaped functions, is employed. Once a small portion of a peripheral liner is removed, the attenuation rate near the frequency where maximum attenuation occurs drops significantly. The positioning of the liner segments affects the attenuation characteristics of the liner. Effects of the duct termination are important in the low frequency ranges. The main effect of peripheral variation of the liner is a broadening of the attenuation characteristics in the midfrequency range. Because of matrix size limitations of the presently available computer program, the eigenvalue equations should be solved out of core in order to handle realistic sources.

Watson, W. R.↗

Optimum wall impedance for spinning modes: A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio, is presented. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗

Benefit-cost evaluation of an intra-regional air service in the Bay area

Utilization of an iterative statistical model is presented to evaluate combinations of commuter airport sites and surface transportation facilities in confunction with service by a given commuter aircraft type in light of Bay Area regional growth alternatives and peak and off-peak regional travel patterns. The model evaluates such transportation options with respect to criteria of airline profitability, public acceptance, and public and private nonuser costs. It incorporates information modal split, peak and off-peak use of the air commuter fleet, terminal and airport cost, development costs and uses of land in proximity to the airport sites, regional population shifts, and induced zonal shifts in travel demand. The model is multimodal in its analytical capability, and performs exhaustive sensitivity analysis.

Haefner, L. E.↗

Executive summary: Benefit-cost evaluation of an intra-regional air service in the Bay Area and a technology assessment of transportation system investments

The benefits and costs that would result from an intra-regional air service operation in the San Francisco Bay area were determined by utilizing an iterative statistical decision model to evaluate combinations of commuter airport sites and surface transportation facilities in conjunction with service by a given commuter aircraft type in light of area regional growth alternatives and peak and off-peak regional travel patterns. The model evaluates such transportation option with respect to criteria of airline profitability, public acceptance, and public and private non-user costs. In so doing, it incorporates information on modal split, peak and off-peak use of the air commuter fleet, terminal and airport costs, development costs and uses of land in proximity to the airport sites, regional population shifts, and induced zonal shifts in travel demand. The model is multimodal in its analytic capability, and performs exhaustive sensitivity analysis.

Haefner, L. E.↗

Optimum wall impedance for spinning modes - A correlation with mode cut-off ratio

A correlating equation relating the optimum acoustic impedance for the wall lining of a circular duct to the acoustic mode cut-off ratio is presented and compared to exact calculations. The optimum impedance was correlated with cut-off ratio because the cut-off ratio appears to be the fundamental parameter governing the propagation of sound in the duct. Modes with similar cut-off ratios respond in a similar way to the acoustic liner. The correlating equation is useful for the design of suppressors for aircraft engine inlets having a steady mean flow with a boundary layer and spinning mode noise source excitation. The correlation is a semi-empirical expression developed from an empirical modification of an equation originally derived from sound propagation theory in a thin boundary layer. Exact calculations of the optimum wall impedance were made over a wide range of frequency parameters, boundary layer thicknesses and flow Mach numbers to develop and verify the correlation. This correlating equation represents a part of a simplified liner design method, based upon modal cut-off ratio, for multimodal noise propagation.

Rice, E. J.↗

Thermodynamic processes induced by coherent radiation

It is shown by quantum statistics that under certain stated conditions the entropy of coherent radiation is zero and it is still negligible for multimode laser operation. This makes possible gas kinetic processes which, to a small extent, have already been observed or even utilized, but which can be greatly enhanced by an optimized choice of molecular structures and radiation conditions. Radiative cooling of gases is discussed in detail. The conditions for maximum heat withdrawal are derived, and it is proposed that the processes of cooling and relaxation heating can be sufficiently separated in time to achieve certain effects and thermodynamic cycles. One of these is the complete conversion, possible in principle, of coherent radiation into work. This concept is based on a heat pump process followed by heat-to-work conversion, the heat rejected being just equal to that withdrawn by radiation. The conditions for complete conversion turn out to be the same as for maximum heat withdrawal. The feasibility of these processes depends on the degree to which practical conditions can be met, and on the validity of certain assumptions which have to await experimental verification.

Garbuny, M.↗

Continuous distributions of specific ventilation recovered from inert gas washout

A new technique is described for recovering continuous distributions of ventilation as a function of tidal ventilation/volume ratio from the nitrogen washout. The analysis yields a continuous distribution of ventilation as a function of tidal ventilation/volume ratio represented as fractional ventilations of 50 compartments plus dead space. The procedure was verified by recovering known distributions from data to which noise had been added. Using an apparatus to control the subject's tidal volume and FRC, mixed expired N2 data gave the following results: (a) the distributions of young, normal subjects were narrow and unimodal; (b) those of subjects over age 40 were broader with more poorly ventilated units; (c) patients with pulmonary disease of all descriptions showed enlarged dead space; (d) patients with cystic fibrosis showed multimodal distributions with the bulk of the ventilation going to overventilated units; and (e) patients with obstructive lung disease fell into several classes, three of which are illustrated.

Lewis, S. M.↗

Splicing single-mode optical fibers

Approach used to weld multimode fibers has been adapted for more exacting splicing of single-mode fibers. Precision cleaver with tungsten carbide knife edge cuts single-mode optical fibers for welding. Welding apparatus includes micromanipulator, microscopes, and vacuum chucks.

Goldstein, R.↗

Coma recovery

Arousal from coma is defined as a function of the reticular activating system that is located between the spinal cord and the diencephalon core of the brain stem. This system receives information from all the sensory functions of the body for distribution to the various parts of the cortex in order to maintain normal activities. Multimodal, neurosensory stimulation techniques are outlined that are designed to help the patient recover from the comatose state.

Dimancescu, M. D.↗

Review of composite propellant burn rate modeling

Steady-state combustion modeling of composite solid propellants is discussed with emphasis on the Beckstead-Derr-Price (BDP) model. The BDP model and some revisions are considered with respect to the analysis of monomodal ammonium perchlorate/inert binder propellants: topics examined include continuity relations, surface area relations, characteristic surface dimension, flame heights, and energy balance. Application of the BDP model to more complicated propellants containing multiple active ingredients is described. These propellants include multimodal, mixed oxidizer, active binder, aluminized, catalyzed, and nitramine propellants. Example cases of modeling (with comparison to experimental data) are presented, and strengths and weaknesses of current modeling approaches are evaluated.

Cohen, N. S.↗

The application of finite element techniques to acoustic transmission in lined ducts with flow

The finite element method (FEM) is used to analyze the propagation of sound in two-dimensional nonuniform ducts carrying a compressible subsonic mean flow. Galerkin and residual least squares (RLS) methods with natural and forced boundary conditions are considered. The accuracy of FEM results for the eigenvalue and transmission problems is assessed by comparison with alternative numerical schemes for nonuniform ducts. The results presented and those from associated investigations indicate that modal coupling is a significant feature of the acoustic field, especially at high Mach numbers. A multimodal model therefore appears to be essential if any reliable conclusions are to be drawn in the context of turbofan inlet regions. Improvements to the eigenvalue scheme following the implementation of higher-order Hermitian elements indicate a similar modification for the transmission problem.

Astley, R. J.↗

Modal confidence factor in vibration testing

The theory and applications of a time domain modal test technique are presented. The method uses free decay of random responses from a structure under test to identify its modal characteristics namely, natural frequencies, damping factors, and mode shapes. The method can identify multimodal (highly coupled) systems and modes that have very small contribution in the responses. A method is presented to decrease the effects of high levels of noise in the data and thus improve the accuracy of identified parameters. This is accomplished using an oversized mathematical model. The concept of modal confidence factor (MCF) is developed. The MCF is a number calculated for every identified mode for a structure under test. The MCF varies from 0.000 for a distorted, nonlinear, or noise mode to 100.0 for a pure structural mode. The theory of the MCF is based on the correlation that exits between the modal deflection at a certain station and the modal deflection at the same station delayed in time. The theory and application of the MCF is illustrated by two experiments. The first experiment deals with simulated responses from a two degree of freedom system with 20 percent, 40 percent, and 100 percent noise added. The second experiment was run on a generalized payload model. The free decay response from the payload model contained about 22 percent noise.

Ibrahim, S. R.↗