Search NASA⌕ Search

SEARCH · Search NASA

Results for “non-linear systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Experimental study of the laminar-turbulent transition of a concave wall in a parallel flow

The instability of the laminar boundary layer flow along a concave wall was studied. Observations of these three-dimensional boundary layer phenomena were made using the hydrogen-bubble visualization technique. With the application of stereo-photogrammetric methods in the air-water system it was possible to investigate the flow processes qualitatively and quantitatively. In the case of a concave wall of sufficient curvature, a primary instability occurs first in the form of Goertler vortices with wave lengths depending upon the boundary layer thickness and the wall curvature. At the onset the amplification rate is in agreement with the linear theory. Later, during the non-linear amplification stage, periodic spanwise vorticity concentrations develop in the low velocity region between the longitudinal vortices. Then a meandering motion of the longitudinal vortex streets subsequently ensues, leading to turbulence.

Bippes, H.↗
NASA NTRS1977

Non-linear duct acoustics and its application to fan noise

Quite often the scalar Helmholtz equation is assumed to be the fundamental equation of duct acoustics and various relations are derived from it. An investigation is, therefore, conducted regarding the underlying assumptions leading to the Helmholtz equation. It is found that serious errors, even well below 186 dB, are possible if the assumption of linearity were to be made. In duct acoustics these errors are highest near the cutoff points and in the case of ducts with transonic flow. It is pointed out that serious errors could arise if a nonlinear problem is analyzed by linear methods. At times, an entire phenomenon remains unpredictable by linear methods. Attention is given to the characteristics of nonlinear systems, the phenomenon of multiple pure tones in the case of noise from the aircraft engine fans, the limitations of the conventional acoustics equation, duct shape and nonlinearity, and the numerical simulation of a fan with 8 blades.

Vaidya, P. G.↗
NASA NTRS1978

A digital strategy for manometer dynamic enhancement

Application of digital signal processing techniques to improve the non-linear dynamic characteristics of a sonar-type mercury manometer is described. The dynamic enhancement strategy quasi-linearizes the manometer characteristics and improves the effective bandwidth in the context of a wind-tunnel pressure regulation system. Model identification data and real-time hybrid simulation data demonstrate feasibility of approach.

Stoughton, J. W.↗
NASA NTRS1979

Identification and dual adaptive control of a turbojet engine

The objective of this paper is to utilize the design methods of modern control theory to realize a 'dual-adaptive' feedback control unit for a highly non-linear single spool airbreathing turbojet engine. Using a very detailed and accurate simulation of the non-linear engine as the data source, linear operating point models of unspecified dimension are identified. Feedback control laws are designed at each operating point for a prespecified set of sampling rates using sampled-data output regulator theory. The control system sampling rate is determined by an adaptive sampling algorithm in correspondence with turbojet engine performance. The result is a 'dual-adpative' control law that is functionally dependent upon the sampling rate selected and environmental operating conditions. Simulation transients demonstrate the utility of the dual-adaptive design to improve on-board computer utilization while maintaining acceptable levels of engine performance.

Merrill, W.↗
NASA NTRS1979

Surprisal analysis of rotational-translational energy transfer - Non-linear versus linear rotors

Surprisal versus energy gap analyses of state-to-state cross sections are presented for a number of linear rigid rotors excited by collisions with atoms for H2-H, H2-He, HCl-He, HCl-Ar, CO-He, CS-H2 (j=0) OCS-H2 (j=0) and HN2(+)-He, where (j=0) indicates that the hydrogen molecule was constrained to remain in its lowest level. Different systems exhibit wide variations in the slope of the surprisal plot and in certain cases, enough to indicate that the energy gap may not be the static dynamical constraint. Similar analyses are presented for nonlinear rotors excited by atoms for H2CO-He and H2O-He. For these, the data show a great deal of scatter, indicating that the reduced energy gap is probably not the appropriate independent variable.

Green, S.↗
NASA NTRS1981

Determination of the potential in a synodic system

Determination of the potential field in a fixed (inertial) system may be accomplished by the solution of a homogeneous linear partial differential equation when a family of orbits of a body moving in the field is given. This partial differential equation was presented and thoroughly analyzed earlier. The present paper discusses the same problem in a rotating system where the centrifugal and Coriolis effects render the pertinent partial differential equation in general non-homogeneous and non-linear. A linear, though non-homogeneous, partial differential equation for the determination of the synodic potential is obtained only in the special case of iso-energetic families of orbits.

Szebehely, V.↗
NASA NTRS1987

Position Control for Non-linear, Multiple-Link Robots

Several approaches to complicated control problem examined. Report surveys methods for controlling motion of robot manipulators. Applies to coupled, highly nonlinear multiple-link robots. Presents adaptive control technique based on discrete linear model of robot arm, obtained by linearizing nonlinear dynamical equations about nominal trajectory. Parameters of model calculated with adaptive parameter-identification algorithm. Based on system model, optimal control input computed using position and velocity feedback.

Seraji, H.↗
NASA NTRS1991

Bending waves and orbital inclinations

Disk tides may play an important role in the formation of a planetary system. Modification of protoplanet semi-major axes and eccentricities through density waves was suggested and calculations of linear and non-linear protoplanet-nebula interactions were carried out by a number of researchers. The possible significance of radial drift to the accretion process was discussed, while the evolution of orbital eccentricities was studied for a perturber orbiting external to a ring and for a perturber embedded in the ring. The possible importance of bending waves to the early evolution of protoplanet inclinations is described.

Ward, William R.↗
NASA NTRS1991

Inhibiting multiple mode vibration in controlled flexible systems

Prior research has led to the development of input command pre-shapers that can significantly reduce residual vibration. These shapers exhibit marked insensitivity to errors in natural frequency estimates and can be used to minimize vibration at more than one frequency. A method is outlined for the development of multiple mode input shapers. An examination is made of the results of shaper performance tests conducted on linear and non-linear computer models of MACE, an MIT/NASA experimental flexible structure.

Hyde, James M.↗
NASA NTRS1993

Active suspension design for a Large Space Structure ground test facility

The expected future high performance requirements for Large Space Structures (LSS) enforce technology innovations such as active vibration damping techniques e.g., by means of structure sensors and actuators. The implementation of new technologies like that requires an interactive and integrated structural and control design with an increased effort in hardware validation by ground testing. During the technology development phase generic system tests will be most important covering verification and validation aspects up to the preparation and definition of relevant space experiments. For many applications using advanced designs it is deemed necessary to improve existing testing technology by further reducing disturbances and gravity coupling effects while maintaining high performance reliability. A key issue in this context is the improvement of suspension techniques. The ideal ground test facility satisfying these requirements completely will never be found. The highest degree of reliability will always be obtained by passive suspension methods taking into account severe performance limitations such as non-zero rigid body modes, restriction of degrees of freedom of motion and frequency response limitations. Passive compensation mechanisms, e.g., zero-spring-rate mechanisms, either require large moving masses or they are limited with respect to low-frequency performance by friction, stiction or other non-linear effects. With active suspensions these limitations can be removed to a large extent thereby increasing the range of applications. Despite an additional complexity which is associated with a potential risk in reliability their development is considered promising due to the amazing improvement of real-time control technology which is still continuing.

Lange, Thomas J. H.↗
NASA NTRS1993

The time keeping system for GPS block IIR

The precision time keeping system (TKS) in the Global Positioning System (GPS), Block IIR satellites is designed to operate under severe natural and man made environmental conditions. The Block IIR TKS provides precise, autonomous time keeping for periods of up to seven months, without the intervention of the GPS Control Segment. The TKS is implemented using both linear and non-linear controls. The resulting TKS architecture uses a hybrid analog/digital phase locked loop (PLL). The paper provides details of the design and analysis of the TKS. The simulation techniques and the test bed activities used in performing the TKS design trade-offs are described. The effects of non-linear controls are analyzed using a TKS computer simulation of the PLL. The results from a hardware test bed are provided that verify desired TKS operation. The design criteria for the TKS computer simulation and the hardware test bed are indicated. The concepts for verification and testing of the TKS computer simulation and hardware test bed are presented.

Rawicz, H. C.↗
NASA NTRS1992

PHOTCAL: The IRAF photometric calibration package

The IRAF photmetric calibration package PHOTCAL is discussed. PHOTCAL is a set of tasks designed to derive the transformation from the instrumental photometric system to the standard photometric system, and apply the transformation to the observations. The PHOTCAL package contains tasks for: (1) creating and/or editing standard star catalogs and observations catalogs, (2) creating, checking and editing the configuration file which specifies the format of the standard star and observations catalogs and the form of the transformation equations, (3) solving the transformation equations interactively or non-iteractively using non-linear least squares fitting routines, and (4) applying the transformation to the observations. PHOTCAL standard star and observations catalogs are simple text files, whose columns are delimited by whitespace, and whose first column contains the star names. This format makes it relatively easy to interface the output of non-IRAF photometry programs as well as the output of the IRAF APPHOT and DAOPHOT photometry packages to PHOTCAL. PHOTCAL maintains a standard star catalog directory for the convenience of the user, but users can easily create their own standard star catalogs and/or define their own standard star catalog directory. Separate observations files produced by APPHOT, DAOPHOT or a user program containing data for stellar fields taken through different filters, can be combined into observations catalogs using one of the PHOTCAL preprocessor tasks. The input configuration file required by PHOTCAL is a text file, consisting of a series of instructions written by the user in a mini-language understood by the PHOTCAL parser. These instructions: (1) assign names to the input data columns in the standard star and observations catalogs, (2) assign names and initial values to the parameters to be fit, (3) define and describe how to solve the transformation equations. The mini-language approach permits great flexibility in the format of the input catalogs and the form of the transformation equations.

Davis, L. E.↗
NASA NTRS1993

Mechanically fastened composite laminates subjected to combined bearing-bypass and shear loading

Bolts and rivets provide a means of load transfer in the construction of aircraft. However, they give rise to stress concentrations and are often the source and location of static and fatigue failures. Furthermore, fastener holes are prone to cracks during take-off and landing. These cracks present the most common origin of structural failures in aircraft. Therefore, accurate determination of the contact stresses associated with such loaded holes in mechanically fastened joints is essential to reliable strength evaluation and failure prediction. As the laminate is subjected to loading, the contact region, whose extent is not known, develops between the fastener and the hole boundary through this contact region, which consists of slip and no-slip zones due to friction. The presence of the unknown contact stress distribution over the contact region between the pin and the composite laminate, material anisotropy, friction between the pin and the laminate, pin-hole clearance, combined bearing-bypass and shear loading, and finite geometry of the laminate result in a complex non-linear problem. In the case of bearing-bypass loading in compression, this non-linear problem is further complicated by the presence of dual contact regions. Previous research concerning the analysis of mechanical joints subjected to combined bearing-bypass and shear loading is non-existent. In the case of bearing-bypass loading only, except for the study conducted by Naik and Crews (1991), others employed the concept of superposition which is not valid for this non-linear problem. Naik and Crews applied a linear finite element analysis with conditions along the pin-hole contact region specified as displacement constraint equations. The major shortcoming of this method is that the variation of the contract region as a function of the applied load should be known a priori. Also, their analysis is limited to symmetric geometry and material systems, and frictionless boundary conditions. Since the contact stress distribution and the contact region are not known a priori, they did not directly impose the boundary conditions appropriate for modelling the contact and on-contact regions between the fastener and the hole. Furthermore, finite element analysis is not suitable for iterative design calculations for optimizing laminate construction in the presence of fasteners under complex loading conditions. In this study, the solution method developed by Madenci and Ileri (1992a,b) has been extended to determine the contact stresses in mechanical joints under combined bearing-bypass and shear loading, and bearing-bypass loading in compression resulting in dual contact regions.

Madenci, Erdogan↗
NASA NTRS1995

Expendable launch vehicle studies

Analytical support studies of expendable launch vehicles concentrate on the stability of the dynamics during launch especially during or near the region of maximum dynamic pressure. The in-plane dynamic equations of a generic launch vehicle with multiple flexible bending and fuel sloshing modes are developed and linearized. The information from LeRC about the grids, masses, and modes is incorporated into the model. The eigenvalues of the plant are analyzed for several modeling factors: utilizing diagonal mass matrix, uniform beam assumption, inclusion of aerodynamics, and the interaction between the aerodynamics and the flexible bending motion. Preliminary PID, LQR, and LQG control designs with sensor and actuator dynamics for this system and simulations are also conducted. The initial analysis for comparison of PD (proportional-derivative) and full state feedback LQR Linear quadratic regulator) shows that the split weighted LQR controller has better performance than that of the PD. In order to meet both the performance and robustness requirements, the H(sub infinity) robust controller for the expendable launch vehicle is developed. The simulation indicates that both the performance and robustness of the H(sub infinity) controller are better than that for the PID and LQG controllers. The modelling and analysis support studies team has continued development of methodology, using eigensensitivity analysis, to solve three classes of discrete eigenvalue equations. In the first class, the matrix elements are non-linear functions of the eigenvector. All non-linear periodic motion can be cast in this form. Here the eigenvector is comprised of the coefficients of complete basis functions spanning the response space and the eigenvalue is the frequency. The second class of eigenvalue problems studied is the quadratic eigenvalue problem. Solutions for linear viscously damped structures or viscoelastic structures can be reduced to this form. Particular attention is paid to Maxwell and Kelvin models. The third class of problems consists of linear eigenvalue problems in which the elements of the mass and stiffness matrices are stochastic. dynamic structural response for which the parameters are given by probabilistic distribution functions, rather than deterministic values, can be cast in this form. Solutions for several problems in each class will be presented.

Bainum, Peter M.↗
NASA NTRS1995

GRO: Black hole models for gamma-ray bursts

The Burst and Transient Source Experiment (BATSE) on board the Compton Gamma Ray Observatory (CGRO) has established that the distribution of gamma-ray bursts (GRB's) is isotropic but is bound radially. This finding suggests that the bursts are either cosmological or they originate from an extended Galactic halo. The implied luminosities and the observed variability of the GRB's on time scales as short as one millisecond suggest that they originate from compact objects. We are presently studying black hole models for GRB's. Any such model must produce a non-thermal photon spectrum to agree with the observed properties. For a wide range of burst parameters the assumed bursting source consists of a non-thermal electron-positron-photon plasma of very high density. It seems possible to produce such a plasma in accretion onto black holes. In our on-going work, we are developing the kinetic theory for a non-equilibrium pair plasma. The main new features of our work are as follows: (1) We do not assume the presence of a thermal electron bath. (2) Non-thermal, high-energy pairs are allowed to have an arbitrary concentration and energy distribution. (3) There is no soft photon source in our model; initially all the photons in the plasma are either energetic X-rays or gamma-rays. (4) The initial energy distribution of the pairs as well as photons is arbitrary. (5) We collect the analytical expressions for the kinetic kernels for all relevant processes. And (6) we present a different approach to finding the time-evolution of pair and photon spectra, which is a combination of the kinetic-theory and the non-linear Monte-Carlo schemes. We have developed many Monte-Carlo programs to model various process, to take into account the time evolution, and to incorporate various physical effects which are unique to non-thermal plasmas. The hydrodynamics of fireballs in GRB's was studied before. Applying results from kinetic theory will improve our understanding of these systems.

Ruderman, Malvin↗
NASA NTRS1995

Spatial and Temporal Scaling of Thermal Infrared Remote Sensing Data

Although remote sensing has a central role to play in the acquisition of synoptic data obtained at multiple spatial and temporal scales to facilitate our understanding of local and regional processes as they influence the global climate, the use of thermal infrared (TIR) remote sensing data in this capacity has received only minimal attention. This results from some fundamental challenges that are associated with employing TIR data collected at different space and time scales, either with the same or different sensing systems, and also from other problems that arise in applying a multiple scaled approach to the measurement of surface temperatures. In this paper, we describe some of the more important problems associated with using TIR remote sensing data obtained at different spatial and temporal scales, examine why these problems appear as impediments to using multiple scaled TIR data, and provide some suggestions for future research activities that may address these problems. We elucidate the fundamental concept of scale as it relates to remote sensing and explore how space and time relationships affect TIR data from a problem-dependency perspective. We also describe how linearity and non-linearity observation versus parameter relationships affect the quantitative analysis of TIR data. Some insight is given on how the atmosphere between target and sensor influences the accurate measurement of surface temperatures and how these effects will be compounded in analyzing multiple scaled TIR data. Last, we describe some of the challenges in modeling TIR data obtained at different space and time scales and discuss how multiple scaled TIR data can be used to provide new and important information for measuring and modeling land-atmosphere energy balance processes.

Quattrochi, Dale A.↗
NASA NTRS1996

Droplet Deformation in an Extensional Flow: The Role of Surfactant Physical Chemistry

Surfactant-induced Marangoni effects strongly alter the stresses exerted along fluid particle interfaces. In low gravity processes, these stresses can dictate the system behavior. The dependence of Marangoni effects on surfactant physical chemistry is not understood, severely impacting our ability to predict and control fluid particle flows. A droplet in an extensional flow allows the controlled study of stretching and deforming interfaces. The deformations of the drop allow both Marangoni stresses, which resist tangential shear, and Marangoni elasticities, which resist surface dilatation, to develop. This flow presents an ideal model system for studying these effects. Prior surfactant-related work in this flow considered a linear dependence of the surface tension on the surface concentration, valid only at dilute surface concentrations, or a non-linear framework at concentrations sufficiently dilute that the linear approximation was valid. The linear framework becomes inadequate for several reasons. The finite dimensions of surfactant molecules must be taken into account with a model that includes surfaces saturation. Nonideal interactions between adsorbed surfactant molecules alter the partitioning of surfactant between the bulk and the interface, the dynamics of surfactant adsorptive/desorptive exchange, and the sensitivity of the surface tension to adsorbed surfactant. For example, cohesion between hydrocarbon chains favors strong adsorption. Cohesion also slows the rate of desorption from interfaces, and decreases the sensitivity of the surface tension to adsorbed surfactant. Strong cohesive interactions result in first order surface phase changes with a plateau in the surface tension vs surface concentration. Within this surface concentration range, the surface tension is decoupled from surface concentration gradients. We are engaged in the study of the role of surfactant physical chemistry in determining the Marangoni stresses on a drop in an extensional flow in a numerical and experimental program. Using surfactants whose dynamics and equilibrium behavior have been characterized in our laboratory, drop deformation will be studied in ground-based experiment. In an accompanying numerical study, predictive drop deformations will be determined based on the isotherm and equation of state determined in our laboratory. This work will improve our abilities to predict and control all fluid particle flows.

Stebe, Kathleen J.↗
NASA NTRS1993

Theory of Metastable State Relaxation for Non-Critical Binary Systems with Non-Conserved Order Parameter

A new mathematical ansatz for a solution of the time-dependent Ginzburg-Landau non-linear partial differential equation is developed for non-critical systems such as non-critical binary solutions (solute + solvent) described by the non-conserved scalar order parameter. It is demonstrated that in such systems metastability initiates heterogeneous solute redistribution which results in formation of the non-equilibrium singly-periodic spatial solute structure. It is found how the time-dependent period of this structure evolves in time. In addition, the critical radius r(sub c) for solute embryo of the new solute rich phase together with the metastable state lifetime t(sub c) are determined analytically and analyzed.

Izmailov, Alexander↗