Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Robotic four-dimensional pixel assembly of van der Waals solids

Van der Waals (vdW) solids can be engineered with atomically precise vertical composition through the assembly of layered two-dimensional materials. However, the artisanal assembly of structures from micromechanically exfoliated flakes is not compatible with scalable and rapid manufacturing. Further engineering of vdW solids requires precisely designed and controlled composition over all three spatial dimensions and interlayer rotation. Here, we report a robotic four-dimensional pixel assembly method for manufacturing vdW solids with unprecedented speed, deliberate design, large area and angle control. We used the robotic assembly of prepatterned 'pixels' made from atomically thin two-dimensional components. Wafer-scale two-dimensional material films were grown, patterned through a clean, contact-free process and assembled using engineered adhesive stamps actuated by a high-vacuum robot. We fabricated vdW solids with up to 80 individual layers, consisting of 100 x 100 μm 2 areas with predesigned patterned shapes, laterally/vertically programmed composition and controlled interlayer angle. This enabled efficient optical spectroscopic assays of the vdW solids, revealing new excitonic and absorbance layer dependencies in MoS 2 . Furthermore, we fabricated twisted $N$-layer assemblies, where we observed atomic reconstruction of twisted four-layer WS 2 at high interlayer twist angles of >= 4°. In conclusion, our method enables the rapid manufacturing of atomically resolved quantum materials, which could help realize the full potential of vdW heterostructures as a platform for novel physics and advanced electronic technologies.

42 ENGINEERING↗

Progress Toward Corrugated Feed Horn Arrays in Silicon

We are developing monolithic arrays of corrugated feed horns fabricated in silicon for dual-polarization single-mode operation at 90, 145 and 220 GHz. The arrays consist of hundreds of platelet feed horns assembled from gold-coated stacks of micro-machined silicon wafers. As a first step, Au-coated Si waveguides with a circular, corrugated cross section were fabricated; their attenuation was measured to be less than 0.15 dB/cm from 80 to 110 GHz at room temperature. To ease the manufacture of horn arrays, electrolytic deposition of Au on degenerate Si without a metal seed layer was demonstrated. An apparatus for measuring the radiation pattern, optical efficiency, and spectral band-pass of prototype horns is described. Feed horn arrays made of silicon may find use in measurements of the polarization anisotropy of the cosmic microwave background radiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single Frequency Monolithic Solid State Green Laser as a Potential Source for Vibrometry Systems

In this paper miniature, monolithic single frequency solid state laser operating at 532 nm is presented. Developed Nd:GdVO{sub 4}/YVO{sub 4}/KTP consist of three crystal bonded together with a UV adhesive. The single frequency operation was obtained in wide temperature range from 17 deg. C to 27 deg. C. The laser operated with output power up to 90 mW at 532 nm. The total optical efficiency (808 nm to 532 nm) was 9.5%. Power stability was at the level of +-0.8% and the long term frequency stability was approximately 3centre dot10{sup -8}. The beam has a Gaussian profile and the M2 parameter was below 1.1.

36 MATERIALS SCIENCE↗

Photon noise limited radiation detection with lens-antenna coupled microwave kinetic inductance detectors

Microwave kinetic inductance detectors (MKIDs) have shown great potential for sub-mm instrumentation because of the high scalability of the technology. Here, we demonstrate for the first time in the sub-mm band (0.1-2 mm) a photon noise limited performance of a small antenna coupled MKID detector array and we describe the relation between photon noise and MKID intrinsic generation-recombination noise. Additionally, we use the observed photon noise to measure the optical efficiency of detectors to be 0.8 {+-} 0.2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multifunctional Bi{sub 2}ZnOB{sub 2}O{sub 6} single crystals for second and third order nonlinear optical applications

Bi{sub 2}ZnOB{sub 2}O{sub 6} nonlinear optical single crystals were grown by means of the Kyropoulos method from stoichiometric melt. The second and third harmonic generation (SHG/THG) of Bi{sub 2}ZnOB{sub 2}O{sub 6} crystals were investigated by the SHG/THG Maker fringes technique. Moreover, SHG microscopy studies were carried out providing two-dimensional SHG images as a function of the incident laser polarization. The high nonlinear optical efficiency combined with the possibility to grow high quality crystals make Bi{sub 2}ZnOB{sub 2}O{sub 6} an excellent candidate for photonic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-step laser ionization schemes for in-gas laser ionization and spectroscopy of radioactive isotopes

The in-gas laser ionization and spectroscopy technique has been developed at the Leuven isotope separator on-line facility for the production and in-source laser spectroscopy studies of short-lived radioactive isotopes. In this article, results from a study to identify efficient optical schemes for the two-step resonance laser ionization of 18 elements are presented.

07 ISOTOPE AND RADIATION SOURCES↗

Extended Fourier-transform spectroscopy studies and deperturbation analysis of the spin-orbit coupled A{sup 1}Σ{sup +} and b{sup 3}Π states in RbCs

The article presents a study of the strongly spin-orbit coupled singlet A{sup 1}Σ{sup +} and triplet b{sup 3}Π states of the RbCs molecule, which provide an efficient optical path to transfer ultracold molecules to their rovibrational ground state. Fourier-transform A{sup 1}Σ{sup +} − b{sup 3}Π → X{sup 1}Σ{sup +} and (4){sup 1}Σ{sup +} → A{sup 1}Σ{sup +} − b{sup 3}Π laser-induced fluorescence (LIF) spectra were recorded for the natural mixture of the {sup 85}Rb{sup 133}Cs and {sup 87}Rb{sup 133}Cs isotopologues produced in a heat pipe oven. Overall 8730 rovibronic term values of A{sup 1}Σ{sup +} and b{sup 3}Π states were determined with an uncertainty of 0.01 cm{sup −1} in the energy range [9012, 14087] cm{sup −1}, covering rotational quantum numbers J ∈ [6, 324]. An energy-based deperturbation analysis performed in the framework of the four A{sup 1}Σ{sup +} − b{sup 3}Π{sub Ω=0,1,2} coupled-channels approach reproduces 97% of the experimental term values of both isotopologues with a standard deviation of 0.0036 cm{sup −1}. The reliability of the deperturbed mass-invariant potentials and spin-orbit coupling functions of the interacting A{sup 1}Σ{sup +} and b{sup 3}Π states is additionally proved by a good reproduction of the A − b → X and (4){sup 1}Σ{sup +} → A − b relative intensity distributions. The achieved accuracy of the A − b complex description allowed us to use the latter to assign the observed (5){sup 1}Σ{sup +} → A − b and (3){sup 1}Π → A − b transitions. As is demonstrated, LIF to the A − b complex becomes as informative as to the ground X{sup 1}Σ{sup +} state, which is confirmed by comparing the results of (4){sup 1}Σ{sup +} state analysis based on (4){sup 1}Σ{sup +} → A − b LIF with the data from V. Zuters et al. [Phys. Rev. A 87, 022504 (2013)] based on (4){sup 1}Σ{sup +} → X LIF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced photoluminescence of SrWO{sub 4}:Eu{sup 3+} red phosphor synthesized by mechanochemically assisted solid state metathesis reaction method at room temperature

Optically efficient europium activated alkaline earth metal tungstate nano phosphor (SrWO{sub 4}) with different doping concentrations have been synthesized by mechanochemically assisted solid state metathesis reaction at room temperature for the first time. The XRD and Raman spectra results indicated that the prepared powders exhibit a scheelite-type tetragonal structure. FTIR spectra exhibited a high absorption band situated at around 854 cm{sup −1}, which was ascribed to the W–O antisymmetric stretching vibrations into the [WO{sub 4}]{sup 2−} tetrahedron groups. Analysis of the emission spectra with different Eu{sup 3+} concentrations revealed that the optimum dopant concentration for SrWO{sub 4}: x Eu{sup 3+} phosphor is about 8 mol% of Eu{sup 3+}.The red emission intensity of the SSM prepared SrWO{sub 4}: 0.08Eu{sup 3+} phosphors are 2 times greater than that of the commercial Y{sub 2}O{sub 2}S: Eu{sup 3+} red phosphor prepared by the conventional solid state reaction method. All the results indicate that the phosphor is a promising red phosphor pumped by NUV InGaN chip for fabricating WLED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rare-earth doped transparent ceramics for spectral filtering and quantum information processing

Homogeneous linewidths below 10 kHz are reported for the first time in high-quality Eu{sup 3+} doped Y {sub 2}O{sub 3} transparent ceramics. This result is obtained on the {sup 7}F{sub 0}→{sup 5}D{sub 0} transition in Eu{sup 3+} doped Y {sub 2}O{sub 3} ceramics and corresponds to an improvement of nearly one order of magnitude compared to previously reported values in transparent ceramics. Furthermore, we observed spectral hole lifetimes of ∼15 min that are long enough to enable efficient optical pumping of the nuclear hyperfine levels. Additionally, different Eu{sup 3+} concentrations (up to 1.0%) were studied, resulting in an increase of up to a factor of three in the peak absorption coefficient. These results suggest that transparent ceramics can be useful in applications where narrow and deep spectral holes can be burned into highly absorbing lines, such as quantum information processing and spectral filtering.

36 MATERIALS SCIENCE↗

A theoretical study on 2-amino-5-nitroprydinium trifluoroaceta

The geometry optimization of 2-amino-5-nitroprydinium trifluoroacetate molecule was carried out by using Becke’s three-parameter exchange functional in conjunction with the Lee-Yang-Parr correlation functional (B3LYP) level of density functional theory (DFT) and 6-311++G(d,p) basis set at GAUSSIAN 09 program. The vibration spectrum of the title compound was simulated to predict the presence of functional groups and their vibrational modes. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies were calculated at the same level, and the obtained small energy gap shows that charge transfer occurs in the title compound. The molecular dipole moment, polarizability and hyperpolarizability parameters were determined to evaluate nonlinear optical efficiency of the title compound. Finally, the {sup 13}C and {sup 1}H Nuclear Magnetic Resonance (NMR) chemical shift values were calculated by the application of the gauge independent atomic orbital (GIAO) method. All of the calculations were carried out by using GAUSSIAN 09 program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excitation intensity dependent photoluminescence of annealed two-dimensional MoS{sub 2} grown by chemical vapor deposition

Here, we present detailed results of Raman and photoluminescence (PL) characterization of monolayers of MoS{sub 2} grown by chemical vapor deposition (CVD) on SiO{sub 2}/Si substrates after thermal annealing at 150 °C, 200 °C, and 250 °C in an argon atmosphere. In comparison to the as-grown monolayers, annealing in the temperature range of 150–250 °C brings about significant changes in the band edge luminescence. It is observed that annealing at 150 °C gives rise to a 100-fold increase in the PL intensity and produces a strong band at 1.852 eV attributed to a free-to-bound transition that dominates over the band edge excitonic luminescence. This band disappears for the higher annealing temperatures. The improvement in PL after the 200 °C anneal is reduced in comparison to that obtained after the 150 °C anneal; this is suggested to arise from a decrease in the non-radiative lifetime caused by the creation of sulfur di-vacancies. Annealing at 250 °C degrades the PL in comparison to the as-grown sample because of the onset of disorder/decomposition of the sample. It is clear that the PL features of the CVD-grown MoS{sub 2} monolayer are profoundly affected by thermal annealing in Ar atmosphere. However, further detailed studies are needed to identify, unambiguously, the role of native defects and/or adsorbed species in defining the radiative channels in annealed samples so that the beneficial effect of improvement in the optical efficiency of the MoS{sub 2} monolayers can be leveraged for various device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Well separated trion and neutral excitons on superacid treated MoS{sub 2} monolayers

Developments in optoelectronics and spin-optronics based on transition metal dichalcogenide monolayers (MLs) need materials with efficient optical emission and well-defined transition energies. In as-exfoliated MoS{sub 2} MLs, the photoluminescence (PL) spectra even at low temperature consist typically of broad, overlapping contributions from neutral, charged excitons (trions) and localized states. Here, we show that in superacid treated MoS{sub 2} MLs, the PL intensity increases by up to 60 times at room temperature. The neutral and charged exciton transitions are spectrally well separated in PL and reflectivity at T = 4 K, with linewidth for the neutral exciton of 15 meV, but both transitions have similar intensities compared to the ones in as-exfoliated MLs at the same temperature. Time resolved experiments uncover picoseconds recombination dynamics analyzed separately for charged and neutral exciton emissions. Using the chiral interband selection rules, we demonstrate optically induced valley polarization for both complexes and valley coherence for only the neutral exciton.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion temperature and rotation fluctuation measurements with ultra-fast charge exchange recombination spectroscopy (UF-CHERS) in the DIII-D tokamak

An upgraded detector and several optimizations have significantly improved the Ultra-Fast Charge Exchange Recombination Spectroscopy (UF-CHERS) diagnostic sensitivity to ion temperature and parallel velocity fluctuations at turbulence relevant spatio-temporal scales. Normalized broadband ion temperature and parallel velocity fluctuations down to x̃x∼1% (x = Ti, v∥) and up to ∼450 kHz have been measured in a variety of plasmas. The multi-field nature of the CHERS technique also allows measurements of the cross-phase angles of the fluctuating fields. UF-CHERS is optimized to observe emissions from the electron exchange reaction between intrinsic C6+ and hydrogenic neutral beam injected particles near 529 nm. UF-CHERS consists of two chords separated by ∼1 cm radially, less than the turbulence correlation length in DIII-D plasmas, which enables correlated measurements to suppress incoherent electronic and photon noise. The optical components of the spectrometer include a volume-phase-holographic grating with >90% transmission between 528 and 530 nm and f/2 200-mm lenses, selected to maximize the optical efficiency and photon flux. Diffracted light from each chord is collected in eight spectral bins, each with a bandwidth of ∼0.25 nm, and detected and amplified by chilled avalanche photodiodes and custom high-gain, wide bandwidth low-noise preamplifiers to achieve the optimal signal-to-noise ratio. The resulting signals are digitized at 1 MHz, 103–104× faster than the conventional CHERS diagnostics. Spatial coverage is achieved by repositioning a motorized fiber tray between plasmas. UF-CHERS measurements will advance the understanding of turbulent ion transport and contribute to the validation of transport models and simulations.

Truong, D. D. (ORCID:0000000285732539)↗

Wash Vehicle Fleet Sizing for Contingency Planning Against Dust Storms

Wash vehicles containing either high- or low-pressure water sprayers, a collection of rotating brushes, or a combination of these, are frequently utilized in concentrating solar power (CSP) plants to maintain a high level of optical efficiency in the solar field. In recent years, multiple modeling approaches have been developed to obtain fleet sizes and mirror-washing schedules that optimize the tradeoff of vehicle capital and use costs and labor versus lost revenues due to soiling. These planning models cover normal operating conditions well but do not consider rare events such as dust storms which can cause a significant reduction in receiver productivity, or shut down operations until most or all of the solar field's mirrors have been cleaned. To that end, we propose a methodology that evaluates whether additional capital should be deployed to hedge against these events by weighing the net present value of the expected benefits against the capital costs. The output of this method is a breakeven frequency, a metric we sue to determine whether an additional vehicle should be purchased to address the contingency of dust storms by comparing it to the expected annual storm frequency We develop a small collection of case studies using commercial-scale CSP tower plants and obtain breakeven frequencies that mostly fall between 0.1 and 1.0 storms per year, depending on the existing fleet size and storm severity.

concentrating solar power↗

Analytic gradients for relativistic exact-two-component equation-of-motion coupled-cluster singles and doubles method

A first implementation of analytic gradients for spinor-based relativistic equation-of-motion coupled-cluster singles and doubles method using an exact two-component Hamiltonian augmented with atomic mean-field spin–orbit integrals is reported. To demonstrate its applicability, we present calculations of equilibrium structures and harmonic vibrational frequencies for the electronic ground and excited states of the radium mono-amide molecule (RaNH 2 ) and the radium mono-methoxide molecule (RaOCH 3 ). Spin–orbit coupling is shown to quench Jahn–Teller effects in the first excited state of RaOCH 3 , resulting in a C 3v equilibrium structure. Furthermore, the calculations also show that the radium atoms in these molecules serve as efficient optical cycling centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

25%Eu : KGd(WO{sub 4}){sub 2} laser crystal: spectroscopy and lasing on the {sup 5}D{sub 0}{yields}{sup 7}F{sub 4} transition

25%Eu : KGd(WO{sub 4}){sub 2} crystal is grown by a modified Czochralski method and its spectral and lasing properties are studied. Generation of stimulated emission in this crystal on the {sup 5}D{sub 0}{yields}{sup 7}F{sub 4} transition of the Eu{sup 3+} ion is obtained, as far as we know, for the first time. The laser operates at room temperature at a wavelength of {approx}703 nm under pumping into the {sup 7}F{sub 0}{yields}{sup 5}D{sub 1} absorption band of the europium ion by the second harmonic of a Q-switched Nd : KGW laser ({lambda}{sub pump}= 533.6 nm). With a 9.4-mm-long active element, the output energy in the free-running regime reached 244 {mu}J, while the optical efficiency was 1.5%. (lasers and active media)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lasing in a Tm:Ho:Yb{sub 3}Al{sub 5}O{sub 12} crystal pumped into the {sup 3}H{sub 6} – {sup 3}F{sub 4} transition

A growth technology has been developed, and a Tm:Ho:Yb{sub 3}Al{sub 5}O{sub 12} laser crystal of high optical quality has been grown by Czochralski method. Its spectral and luminescent characteristics are studied. Lasing at a wavelength of 2100 nm is obtained under pumping into the absorption line on the {sup 3}H{sub 6} – {sup 3}F{sub 4} transition of the Tm{sup 3+} ion at a wavelength of 1678 nm. The slope and total (optical) efficiencies of the laser at an output power of up to 320 mW reach 41% and 30%, respectively. (lasers)

36 MATERIALS SCIENCE↗

Superluminescent bismuth-doped fibre IR source for the range 1700−1750 nm

We have demonstrated the first superluminescent IR (1700−1750 nm) source based on bismuth-doped high-germania fibre. Its main output characteristics are as follows: centre wavelength, 1730 nm; emission bandwidth, 50 nm at an output power of ∼7 mW; optical efficiency, ∼1%. (paper)

42 ENGINEERING↗