Search NASA⌕ Search

SEARCH · Search NASA

Results for “page time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Gate assisted turn-off thyristor with cathode shunts and dynamic gate

A 1,000-V, 200-A gate-assisted turn-off thyristor (GATT) is described, whose design features include an interdigitated shunted cathode, a dynamic gate, a means for optimizing the carrier lifetime level, and a bypass diode. The device physics of gate-assisted turn-off are reviewed. Based on this, improvements in the design are described. It is shown that a prime failure mode can be eliminated and that the gate-assist signal voltage can be substantially decreased by employing a shunted cathode emitter. The test data show excellent turn-on characteristics due to the dynamic gate and the long perimeter of the edge of the main cathode. Turn-off times as short as 3 microsec are obtained. The combination of controlling the carrier lifetime with a precisely controlled and easily variable irradiation dose of high energy electrons with gate assist current provides for simple, precision tailoring of the device characteristics to the intended application.

Schlegel, E. S.↗
NASA NTRS1979

The 1977 intertropical convergence zone experiment

Data are presented from the 1977 Intertropical Convergence Zone (ITCZ) Experiment conducted in the Panama Canal Zone in July 1977. Measurements were made daily over a 16-day period when the ITCZ moved across the Canal Zone. Two aircraft (Learjet and U-2) flew daily and provided data from horizontal traverses at several altitudes to 21.3 km of ozone, temperature, pressure, water vapor, aerosols, fluorocarbons, methane, nitrous oxide, nitric oxide, and nitric acid. Balloonsondes flown four times per day provided data on ozone, wind fields, pressure, temperature, and humidities to altitudes near 30 km. Rocketsondes provided daily data to altitudes near 69 km. Satellite photography provided detailed cloud information. Descriptions of individual experiments and detailed compilations of all results are provided.

Poppoff, I. G.↗
NASA NTRS1988

Performance analysis of the Alliant FX/8 multiprocessor using statistical clustering

Results for two distinct, real, scientific workloads executed on an Alliant FX/8 are discussed. A combination of user concurrency and system overhead measurements was taken for both workloads. Preliminary analysis shows that the first sampled workload is comprised of consistently high user concurrency, low system overhead, and little paging. The second sample has much less user concurrency, but significant paging and system overhead. Statistical cluster analysis is used to extract a state transition model to jointly characterize user concurrency and system overhead. A skewness factor is introduced and used to bring out the effects of unbalanced clustering when determining states with important transitions. The results from the models show that during the collection of the first sample, the system was operating in states of high user concurrency approximately 75 percent of the time. The second workload sample shows the system in high user concurrency states only 26 percent of the time. In addition, it is ascertained that high system overhead is usually accompanied by low user concurrency. The analysis also shows a high predictability of system behavior for both workloads.

Dimpsey, Robert Tod↗
NASA NTRS1999

Deformation of Alaskan Volcanoes, Measured by Satellite Radar Inferometry

The purpose of this project was to determine the suitability of measuring active deformation of volcanoes in Alaska using Interferometric Synthetic Aperture Radar (INSAR) techniques. Work sponsored by this grant supported one graduate student (for almost 2 years) and one postdoc (for several months), and has resulted in two published peer-reviewed papers and a front-page article in EOS. An additional paper is in review and a fourth is in preparation. An additional paper in preparation was based in part on research supported by this grant and in part by a successor grant from NASA's Solid Earth Natural Hazards program. Over the course of this research, we documented measurable uplift of Trident volcano in the Katmai group, conducted a systematic study of the change in phase coherence over time on volcanic surfaces, and measured and modeled the spectacular 1.5 m deflation of Okmok caldera associated with its 1997 eruption. We also generated initial interferograms spanning the 1996 seismic swarm of Akutan volcano; however, during the period covered by this project we were not able to remove topography. That has been done under the subsequent funding and a paper is now in preparation. This report summarizes work done under two separate contracts because both were based on the same proposal to NASA's ADRO (Application Development and Research Opportunity) program. The first year was funded out of a grant from NASA Headquarters and the second and third years out of a grant through Goddard. The work, however, was a continuous three year effort.

Freymueller, Jeff↗
NASA NTRS2010

World Wide Web Metaphors for Search Mission Data

A software program that searches and browses mission data emulates a Web browser, containing standard meta - phors for Web browsing. By taking advantage of back-end URLs, users may save and share search states. Also, since a Web interface is familiar to users, training time is reduced. Familiar back and forward buttons move through a local search history. A refresh/reload button regenerates a query, and loads in any new data. URLs can be constructed to save search results. Adding context to the current search is also handled through a familiar Web metaphor. The query is constructed by clicking on hyperlinks that represent new components to the search query. The selection of a link appears to the user as a page change; the choice of links changes to represent the updated search and the results are filtered by the new criteria. Selecting a navigation link changes the current query and also the URL that is associated with it. The back button can be used to return to the previous search state. This software is part of the MSLICE release, which was written in Java. It will run on any current Windows, Macintosh, or Linux system.

Norris, Jeffrey S.↗
NASA NTRS1978

Processing by data and program blocks

A processing system is presented that implements simultaneously the efficiency of the special-purpose processor and the total applicability of the general-purpose computer - characteristics commonly thought of as being mutually exclusive. This is achieved through specializing the machine by programming the hardware structure, rather than by adding software systems to it. Data are organized in circulating pages which form a multiplicity of local dynamic memories for each process. Programs are made up of modules, each describing a transient special-purpose machine. A characteristic of this approach is that the processes are data-driven, rather than program-driven. The programming language presents significant flexibility and efficiency in modeling certain classes of problems, and it may be of interest as an implementation model in a broader context. Applications to real-time processing of radar signals are reported. The relevance of characteristics of this system to problems in multiprogramming and multiprocessing systems is discussed.

Schaffner, M. R.↗
NASA NTRS2002

The Aircraft Simulation Role in Improving Flight Safety Through Control Room Training

NASA Dryden Flight Research Center uses its six-degrees-of-freedom (6-DOF) fixed-base simulations for mission control room training to improve flight safety and operations. This concept is applied to numerous flight projects such as the F-18 High Alpha Research Vehicle (HARV), the F-15 Intelligent Flight Control System (IFCS), the X-38 Actuator Control Test (XACT), and X-43A (Hyper-X). The Dryden 6-DOF simulations are typically used through various stages of a project, from design to ground tests. The roles of these simulations have expanded to support control room training, reinforcing flight safety by building control room staff proficiency. Real-time telemetry, radar, and video data are generated from flight vehicle simulation models. These data are used to drive the control room displays. Nominal static values are used to complete information where appropriate. Audio communication is also an integral part of training sessions. This simulation capability is used to train control room personnel and flight crew for nominal missions and emergency situations. Such training sessions are also opportunities to refine flight cards and control room display pages, exercise emergency procedures, and practice control room setup for the day of flight. This paper describes this technology as it is used in the X-43A and F-15 IFCS and XACT projects.

Shy, Karla S.↗
NASA NTRS2009

Low-Complexity Lossless and Near-Lossless Data Compression Technique for Multispectral Imagery

This work extends the lossless data compression technique described in Fast Lossless Compression of Multispectral- Image Data, (NPO-42517) NASA Tech Briefs, Vol. 30, No. 8 (August 2006), page 26. The original technique was extended to include a near-lossless compression option, allowing substantially smaller compressed file sizes when a small amount of distortion can be tolerated. Near-lossless compression is obtained by including a quantization step prior to encoding of prediction residuals. The original technique uses lossless predictive compression and is designed for use on multispectral imagery. A lossless predictive data compression algorithm compresses a digitized signal one sample at a time as follows: First, a sample value is predicted from previously encoded samples. The difference between the actual sample value and the prediction is called the prediction residual. The prediction residual is encoded into the compressed file. The decompressor can form the same predicted sample and can decode the prediction residual from the compressed file, and so can reconstruct the original sample. A lossless predictive compression algorithm can generally be converted to a near-lossless compression algorithm by quantizing the prediction residuals prior to encoding them. In this case, since the reconstructed sample values will not be identical to the original sample values, the encoder must determine the values that will be reconstructed and use these values for predicting later sample values. The technique described here uses this method, starting with the original technique, to allow near-lossless compression. The extension to allow near-lossless compression adds the ability to achieve much more compression when small amounts of distortion are tolerable, while retaining the low complexity and good overall compression effectiveness of the original algorithm.

Xie, Hua↗
NASA NTRS1978

Making The Invisible Visible

In public and private archives throughout the world there are many historically important documents that have become illegible with the passage of time. They have faded, been erased, acquired mold, water and dirt stain, suffered blotting or lost readability in other ways. While ultraviolet and infrared photography are widely used to enhance deteriorated legibility, these methods are more limited in their effectiveness than the space-derived image enhancement technique. The aim of the JPL effort with Caltech and others is to better define the requirements for a system to restore illegible information for study at a low page-cost with simple operating procedures. The investigators' principle tools are a vidicon camera and an image processing computer program, the same equipment used to produce sharp space pictures. The camera is the same type as those on NASA's Mariner spacecraft which returned to Earth thousands of images of Mars, Venus and Mercury. Space imagery works something like television. The vidicon camera does not take a photograph in the ordinary sense; rather it "scans" a scene, recording different light and shade values which are reproduced as a pattern of dots, hundreds of dots to a line, hundreds of lines in the total picture. The dots are transmitted to an Earth receiver, where they are assembled line by line to form a picture like that on the home TV screen.

Source record↗
NASA NTRS2009

Some Improvements in Utilization of Flash Memory Devices

Two developments improve the utilization of flash memory devices in the face of the following limitations: (1) a flash write element (page) differs in size from a flash erase element (block), (2) a block must be erased before its is rewritten, (3) lifetime of a flash memory is typically limited to about 1,000,000 erases, (4) as many as 2 percent of the blocks of a given device may fail before the expected end of its life, and (5) to ensure reliability of reading and writing, power must not be interrupted during minimum specified reading and writing times. The first development comprises interrelated software components that regulate reading, writing, and erasure operations to minimize migration of data and unevenness in wear; perform erasures during idle times; quickly make erased blocks available for writing; detect and report failed blocks; maintain the overall state of a flash memory to satisfy real-time performance requirements; and detect and initialize a new flash memory device. The second development is a combination of hardware and software that senses the failure of a main power supply and draws power from a capacitive storage circuit designed to hold enough energy to sustain operation until reading or writing is completed.

Gender, Thomas K.↗
NASA NTRS2013

An Evidence Base for Human Spaceflight Risks in Wikipedia

NASA's Human Research Program (HRP) is focused on understanding and mitigating thirty two risks to crew health and performance in exploration missions beyond low Earth orbit. The HRP has developed an evidence report for each of the risks. Most evidence reports are a brief review article describing the evidence related to a specified risk, written at a level appropriate for the scientifically educated, non‐specialist reader. Each evidence report captured the current state of knowledge from both research and operations. Two limitations of the evidence reports have become apparent: 1) they are updated infrequently and 2) they do not take full advantage of the expertise available in other space agencies and in related fields of terrestrial research. Therefore, the HRP is experimenting with the use of Wikipedia articles as a repository for evidence. Wikipedia's accessibility to the international space flight community and researchers in related terrestrial fields creates the opportunity to generate a more timely and comprehensive evidence base. Initial Wikipedia articles were populated for seven risks using a subset of the information in the HRP‐approved evidence reports: Fatigue and Sleep Loss, Treating An Ill or Injured Crew Member, Radiation Carcinogenesis, Visual Impairment and Intracranial Pressure, Renal Stone Formation, Team Cohesion, and Intervertebral Disc Damage. Since the initial articles were created, there have been additions to these Wikipedia articles, including content from sources outside the HRP, and editorial changes to the pages. We will report on the nature of the contributions made after the initial articles were created, the comprehensiveness of the resulting Wikipedia articles, and the effort required to maintain quality control of the content. The Wikipedia approach will also be compared to wiki efforts that exert more traditional editorial control of content prior to posting.

Kundrot, Craig↗
NASA NTRS1975

Computer graphics for management: An abstract of capabilities and applications of the EIS system

The Executive Information Services (EIS) system, developed as a computer-based, time-sharing tool for making and implementing management decisions, and including computer graphics capabilities, was described. The following resources are available through the EIS languages: centralized corporate/gov't data base, customized and working data bases, report writing, general computational capability, specialized routines, modeling/programming capability, and graphics. Nearly all EIS graphs can be created by a single, on-line instruction. A large number of options are available, such as selection of graphic form, line control, shading, placement on the page, multiple images on a page, control of scaling and labeling, plotting of cum data sets, optical grid lines, and stack charts. The following are examples of areas in which the EIS system may be used: research, estimating services, planning, budgeting, and performance measurement, national computer hook-up negotiations.

Solem, B. J.↗
NASA NTRS2004

Compact, Automated Centrifugal Slide-Staining System

The Directional Acceleration Vector-Driven Displacement of Fluids (DAVD-DOF) system, under development at the time of reporting the information for this article, would be a relatively compact, automated, centrifugally actuated system for staining blood smears and other microbiological samples on glass microscope slides in either a microgravitational or a normal Earth gravitational environment. The DAVD-DOF concept is a successor to the centrifuge-operated slide stainer (COSS) concept, which was reported in Slide-Staining System for Microgravity or Gravity (MSC-22949), NASA Tech Briefs, Vol. 25, No. 1 (January, 2001), page 64. The COSS includes reservoirs and a staining chamber that contains a microscope slide to which a biological sample is affixed. The staining chamber is sequentially filled with and drained of staining and related liquids from the reservoirs by use of a weighted plunger to force liquid from one reservoir to another at a constant level of hypergravity maintained in a standard swing-bucket centrifuge. In the DAVD-DOF system, a staining chamber containing a sample would also be sequentially filled and emptied, but with important differences. Instead of a simple microscope slide, one would use a special microscope slide on which would be fabricated a network of very small reservoirs and narrow channels connected to a staining chamber (see figure). Unlike in the COSS, displacement of liquid would be effected by use of the weight of the liquid itself, rather than the weight of a plunger.

Feeback, Daniel L.↗
NASA NTRS1996

Parallelization of Rocket Engine System Software (Press)

The main goal is to assess parallelization requirements for the Rocket Engine Numeric Simulator (RENS) project which, aside from gathering information on liquid-propelled rocket engines and setting forth requirements, involve a large FORTRAN based package at NASA Lewis Research Center and TDK software developed by SUBR/UWF. The ultimate aim is to develop, test, integrate, and suitably deploy a family of software packages on various aspects and facets of rocket engines using liquid-propellants. At present, all project efforts by the funding agency, NASA Lewis Research Center, and the HBCU participants are disseminated over the internet using world wide web home pages. Considering obviously expensive methods of actual field trails, the benefits of software simulators are potentially enormous. When realized, these benefits will be analogous to those provided by numerous CAD/CAM packages and flight-training simulators. According to the overall task assignments, Hampton University's role is to collect all available software, place them in a common format, assess and evaluate, define interfaces, and provide integration. Most importantly, the HU's mission is to see to it that the real-time performance is assured. This involves source code translations, porting, and distribution. The porting will be done in two phases: First, place all software on Cray XMP platform using FORTRAN. After testing and evaluation on the Cray X-MP, the code will be translated to C + + and ported to the parallel nCUBE platform. At present, we are evaluating another option of distributed processing over local area networks using Sun NFS, Ethernet, TCP/IP. Considering the heterogeneous nature of the present software (e.g., first started as an expert system using LISP machines) which now involve FORTRAN code, the effort is expected to be quite challenging.

Cezzar, Ruknet↗
NASA NTRS2005

Solving Nonlinear Euler Equations with Arbitrary Accuracy

A computer program that efficiently solves the time-dependent, nonlinear Euler equations in two dimensions to an arbitrarily high order of accuracy has been developed. The program implements a modified form of a prior arbitrary- accuracy simulation algorithm that is a member of the class of algorithms known in the art as modified expansion solution approximation (MESA) schemes. Whereas millions of lines of code were needed to implement the prior MESA algorithm, it is possible to implement the present MESA algorithm by use of one or a few pages of Fortran code, the exact amount depending on the specific application. The ability to solve the Euler equations to arbitrarily high accuracy is especially beneficial in simulations of aeroacoustic effects in settings in which fully nonlinear behavior is expected - for example, at stagnation points of fan blades, where linearizing assumptions break down. At these locations, it is necessary to solve the full nonlinear Euler equations, and inasmuch as the acoustical energy is of the order of 4 to 5 orders of magnitude below that of the mean flow, it is necessary to achieve an overall fractional error of less than 10-6 in order to faithfully simulate entropy, vortical, and acoustical waves.

Dyson, Rodger W.↗
NASA NTRS2006

FORTRAN Versions of Reformulated HFGMC Codes

Several FORTRAN codes have been written to implement the reformulated version of the high-fidelity generalized method of cells (HFGMC). Various aspects of the HFGMC and its predecessors were described in several prior NASA Tech Briefs articles, the most recent being HFGMC Enhancement of MAC/GMC (LEW-17818-1), NASA Tech Briefs, Vol. 30, No. 3 (March 2006), page 34. The HFGMC is a mathematical model of micromechanics for simulating stress and strain responses of fiber/matrix and other composite materials. The HFGMC overcomes a major limitation of a prior version of the GMC by accounting for coupling of shear and normal stresses and thereby affords greater accuracy, albeit at a large computational cost. In the reformulation of the HFGMC, the issue of computational efficiency was addressed: as a result, codes that implement the reformulated HFGMC complete their calculations about 10 times as fast as do those that implement the HFGMC. The present FORTRAN implementations of the reformulated HFGMC were written to satisfy a need for compatibility with other FORTRAN programs used to analyze structures and composite materials. The FORTRAN implementations also afford capabilities, beyond those of the basic HFGMC, for modeling inelasticity, fiber/matrix debonding, and coupled thermal, mechanical, piezo, and electromagnetic effects.

Arnold, Steven M.↗
NASA NTRS2014

GPU Lossless Hyperspectral Data Compression System

Hyperspectral imaging systems onboard aircraft or spacecraft can acquire large amounts of data, putting a strain on limited downlink and storage resources. Onboard data compression can mitigate this problem but may require a system capable of a high throughput. In order to achieve a high throughput with a software compressor, a graphics processing unit (GPU) implementation of a compressor was developed targeting the current state-of-the-art GPUs from NVIDIA(R). The implementation is based on the fast lossless (FL) compression algorithm reported in "Fast Lossless Compression of Multispectral-Image Data" (NPO- 42517), NASA Tech Briefs, Vol. 30, No. 8 (August 2006), page 26, which operates on hyperspectral data and achieves excellent compression performance while having low complexity. The FL compressor uses an adaptive filtering method and achieves state-of-the-art performance in both compression effectiveness and low complexity. The new Consultative Committee for Space Data Systems (CCSDS) Standard for Lossless Multispectral & Hyperspectral image compression (CCSDS 123) is based on the FL compressor. The software makes use of the highly-parallel processing capability of GPUs to achieve a throughput at least six times higher than that of a software implementation running on a single-core CPU. This implementation provides a practical real-time solution for compression of data from airborne hyperspectral instruments.

Aranki, Nazeeh I.↗
NASA NTRS1990

The near ultraviolet spectra of comets P/Brorsen-Metcalf and Austin

Results are reported on spectrophotometric observations of comets P/Brorsen-Metcalf and Austin from 3000 to 3600 A at a spectral resolution of about 1.8 A. The strongest features are the OH(A-X) 0-0 and 1-1 bands, and the NH(A-X) 0-0 bands. For the first time, the OH(A-X) 0-1 band was clearly found. The existence of the CN(B-X) 2-1 and 3-2 bands were verified and measured. A feature at 3258 A that was first seen in uncalibrated spectra was detected, and was identified as the NH singlet (c-a) 0-0 transition. The CO2(+) features at 3378, 3504, and 3512 A were also firmly identified. This ion was reported as being present in the tail of Comet Bester (1984 I) by Swings and Page (1950). The identification of a weak feature at 3547 A was proposed as the fundamental transition of H2CO, which would make this the first optical cometary detection of this molecule which is very abundant in giant molecular clouds.

Cochran, William D.↗