Search NASA⌕ Search

SEARCH · Search NASA

Results for “parabolic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Streamwise computation of three-dimensional parabolic flows

A new approach to calculate three-dimensional parabolic flows is presented. The flow field is computed by calculating velocity along a set of streamlines. The dependent variables commonly used in the computation of three-dimensional flows are the three velocity components. In contrast, the dependent variables in the present approach are the streamwise velocity and the two coordinates, in the cross-stream plane, of the chosen streamlines. The streamwise velocity is calculated from the finite difference equations obtained by applying Euler's momentum theorem to streamtubes constructed around the chosen streamlines; the streamline coordinates are calculated from the conservation of mass. Results of the calculations, based on the present approach, are compared with the experimental data for flow through rectangular ducts; the agreement is satisfactory.

Greywall, M. S.↗
NASA NTRS1984

A comparative study of the parabolized Navier-Stokes code using various grid-generation techniques

The parabolized Navier-Stokes (PNS) equations are used to calculate the flow-field characteristics about the hypersonic research aircraft X-24C. A comparison of the results obtained using elliptic, hyperbolic, and algebraic grid generators is presented. The outer bow shock is treated as a sharp discontinuity, and the discontinuities within the shock layer are captured. Surface pressures and heat-transfer results at angles of attack of 6 deg and 20 deg, obtained using the three grid generators, are compared. The PNS equations are marched downstream over the body in both Cartesian and cylindrical base coordinate systems, and the results are compared. A robust marching procedure is demonstrated by successfully using large marching step sizes with the implicit shock fitting procedure. A correlation is found between the marching step size, Reynolds number, and the angle of attack at fixed values of smoothing and stability coefficients for the marching scheme.

Kaul, U. K.↗
NASA NTRS1982

Noniterative grid generation using parabolic difference equations for fuselage-wing flow calculations

A fast method for generating three-dimensional grids for fuselage-wing transonic flow calculations using parabolic difference equations is described. No iterative scheme is used in the three-dimensional sense; grids are generated from one grid surface to the next starting from the fuselage surface. The computational procedure is similar to the iterative solution of the two-dimensional heat conduction equation. The proposed method is at least 10 times faster than the elliptic grid generation method and has much smaller memory requirements. Results are presented for a fuselage and wing of NACA-0012 section and thickness ratio of 10 percent. Although only H-grids are demonstrated, the present technique should be applicable to C-grids and O-grids in three dimensions.

Nakamura, S.↗
NASA NTRS1982

Simulation of large turbulent vortex structures with the parabolic Navier-Stokes equations

The theoretical basis for well posed marching of a Parabolic Navier-Stokes (PNS) computational technique for supersonic flow is discussed and examples given to verify the analysis. It is demonstrated that stable computations can be made even with very small steps in the marching direction. The method is applied to cones at large angle of attack in high Reynolds number, supersonic flow. Streamline trajectories generated from the numerical solutions demonstrate the development of vortex structures of the lee side of the cone. Previously announced in STAR as N83-22551

Rakich, J. V.↗
NASA NTRS1984

Elicitation of motion sickness by head movements in the microgravity phase of parabolic flight maneuvers

Susceptibility to motion sickness was tested in 44 subjects during parabolic flight maneuvers in a KC-135 aircraft. The subjects were categorized as: (1) insusceptible; (2) moderately susceptible; or (3) highly susceptible to motion sickness during exposure to varying degrees of gravito-inertial force. After categorization, three types of head movements were evaluated to determine the effect on the subjects' baseline susceptibility. Ten cycles of head movements were made in three different parabolas until nausea was reached or 40 parabolas had been completed. All types of head movements significantly increased susceptibility for all categories; eyes-open conditions were always more stressful than eyes-closed conditions for each type of head movement. It is concluded that head movements in microgravity can elicit symptoms of motion sickness. It is suggested that head movements play an etiological role in space motion sickness. In ground based studies where head movements are necessary to elicit symptoms, they are also necessary to elicit adaptation to the microgravity environment.

Lackner, J. R.↗
NASA NTRS1984

Parabolized Navier-Stokes analysis of three-dimensional supersonic and subsonic jet mixing problems

Three-dimensional jet mixing problems are addressed by means of two parabolized Navier-Stokes models. The first of these analyzes supersonic, overexpanded or underexpanded nonaxisymmetric jets, and yields results that exhibit complex, three-dimensional interactions. The second model uses the same numerical framework as the first, and analyzes rectangular jets by means of a pressure-split formulation. Square and rectangular mixing jet problems that highlight this model's capabilities and exhibit the distortion of the nearfield jet contours associated with the streamwise vortices generated by two corner regions are presented.

Dash, S. M.↗
NASA NTRS1983

A new explicit method for the numerical solution of parabolic differential equations

A new method is derived for solving parabolic partial differential equations arising in transient heat conduction or in boundary-layer flows. The method is based on a combination of the modified differential quadrature (MDQ) method with the rational Runge-Kutta time-integration scheme. It is fully explicit, requires no matrix inversion, and is stable for any time-step for the heat equations. Burgers equation and the one- and two-dimensional heat equations are solved to demonstrate the accuracy and efficiency of the proposed algorithm. The present method is found to be very accurate and efficient when results are compared with analytic solutions.

Satofuka, N.↗
NASA NTRS1984

The linear regulator problem for parabolic systems

The paper presents an approximation framework for computation (in finite dimensional spaces) of Riccati operators that can be guaranteed to converge to the Ricccati operator in feedback controls for abstract evolution systems in a Hilbert space. It is shown how these results may be used in the linear optimal regulator problem for a large class of parabolic systems.

Banks, H. T.↗
NASA NTRS1986

Economical Fabrication of Large Parabolic Mirrors

Long-focal-length parabolic mirrors fabricated economically by rotational casting. Technique applies to very large mirrors and incorporates new foam/fiberglass techniques ideal for producing rigid, lightweight mirrors. Process developed to produce mirrors that concentrate Sunlight for solarpumped laser.

Schneider, R. T.↗
NASA NTRS1984

Software used with the flux mapper at the solar parabolic dish test site

Software for data archiving and data display was developed for use on a Digital Equipment Corporation (DEC) PDP-11/34A minicomputer for use with the JPL-designed flux mapper. The flux mapper is a two-dimensional, high radiant energy scanning device designed to measure radiant flux energies expected at the focal point of solar parabolic dish concentrators. Interfacing to the DEC equipment was accomplished by standard RS-232C serial lines. The design of the software was dicated by design constraints of the flux-mapper controller. Early attemps at data acquisition from the flux-mapper controller were not without difficulty. Time and personnel limitations result in an alternative method of data recording at the test site with subsequent analysis accomplished at a data evaluation location at some later time. Software for plotting was also written to better visualize the flux patterns. Recommendations for future alternative development are discussed. A listing of the programs used in the anaysis is included in an appendix.

Miyazono, C.↗
NASA NTRS1984

A second-order accurate parabolized Navier-Stokes algorithm for internal flows

A parabolized implicit Navier-Stokes algorithm which is of second-order accuracy in both the cross flow and marching directions is presented. The algorithm is used to analyze three model supersonic flow problems (the flow over a 10-degree edge). The results are found to be in good agreement with the results of other techniques available in the literature.

Chitsomboon, T.↗
NASA NTRS1985

Spectral methods in time for parabolic problems

A pseudospectral explicit scheme for solving linear, periodic, parabolic problems is described which has infinite accuracy both in time and in space. The high accuracy is achieved while the time resolution parameter M ( = ) (1/delta t) for time marching algorithm) and the space resolution parameter N B = O(1/detla x) have to satisfy M = O(N sup/+epsilon) epsilon O, compared to the common stability condition M = O(N sup 2) which has to be satisfied in any explicit finite order time algorithm.

Tal-Ezer, H.↗
NASA NTRS1985

Investigation of parabolic computational techniques for internal high-speed viscous flows

A feasibility study was conducted to assess the applicability of an existing parabolic analysis (ADD-Axisymmetric Diffuser Duct), developed previously for subsonic viscous internal flows, to mixed supersonic/subsonic flows with heat addition simulating a SCRAMJET combustor. A study was conducted with the ADD code modified to include additional convection effects in the normal momentum equation when supersonic expansion and compression waves were present. It is concluded from the present study that for the class of problems where strong viscous/inviscid interactions are present a global iteration procedure is required.

Anderson, O. L.↗
NASA NTRS1985

Calculation of three-dimensional, viscous flow through turbomachinery blade passages by parabolic marching

The three-dimensional compressible Navier-Stokes equations are formulated in a rotating coordinate system, so as to include centrifugal and Coriolis forces. The equations are parabolized by using a previously calculated inviscid static pressure field. The thin layer Navier-Stokes approximation, which neglects streamwise diffusion, is used. A body-fitted coordinate system is used. The streamwise momentum equation is uncoupled from the cross-stream momentum equation by using contravariant momentum components, and then using the contravariant velocity components as primary unknowns. To reduce problems with small separated regions, the Reyhner and Flugge-Lotz approximation is used. The energy equation is included to allow for calculation of heat transfer. The flow may be laminar, or a simple eddy-viscosity turbulence may be used. A number of curved ducts and an axial stator were analyzed, including cases for which experimental data are available.

Katsanis, T.↗
NASA NTRS1981

Manufacturing cost analysis of a parabolic dish concentrator (General Electric design) for solar thermal electric power systems in selected production volumes

The manufacturing cost of a General Electric 12 meter diameter concentrator was estimated. This parabolic dish concentrator for solar thermal system was costed in annual production volumes of 100 - 1,000 - 5,000 - 10,000 - 50,000 100,000 - 400,000 and 1,000,000 units. Presented for each volume are the costs of direct labor, material, burden, tooling, capital equipment and buildings. Also presented is the direct labor personnel and factory space requirements. All costs are based on early 1981 economics.

Source record↗
NASA NTRS1984

Higher-order parabolic approximations for sound propagation in stratified moving media

Asymptotic solutions of order k-n are developed for the equations governing the propagation of sound through a stratified moving medium. Here k is a dimensionless wave number and n is the arbitrary order of the approximation. These approximations are an extension of geometric acoustics theory and provide corrections to that theory in the form of multiplicative functions which satisfy parabolic partial differential equations. These corrections account for the diffraction effects caused by variation of the field normal to the ray path and the interaction of these transverse variations with the variation of the field along the ray. The theory is illustrated by application to simple examples.

Mcaninch, G. L.↗
NASA NTRS1985

Noniterative three-dimensional grid generation using parabolic partial differential equations

A new algorithm for generating three-dimensional grids has been developed and implemented which numerically solves a parabolic partial differential equation (PDE). The solution procedure marches outward in two coordinate directions, and requires inversion of a scalar tridiagonal system in the third. Source terms have been introduced to control the spacing and angle of grid lines near the grid boundaries, and to control the outer boundary point distribution. The method has been found to generate grids about 100 times faster than comparable grids generated via solution of elliptic PDEs, and produces smooth grids for finite-difference flow calculations.

Edwards, T. A.↗
NASA NTRS1985

Analysis of turbulent underexpanded jets. I - Parabolized Navier-Stokes model, SCIPVIS

A new computational model (SCIPVIS) is described which predicts the multiple-cell wave/shock structure in underexpanded or overexpanded turbulent jets. SCIPVIS solves the parabolized Navier-Stokes jet-mixing equations utilizing a shock-capturing approach in supersonic regions of the jet and a pressure-split approach in subsonic regions. Turbulence processes are represented by the solution of compressibility-corrected two-equation turbulence models. SCIPVIS presently analyzes jets exhausting into a quiescent or supersonic external stream for which a single-pass spatial-marching solution can be obtained. The features of SCIPVIS are reviewed, and calculations are described exhibiting the influence of turbulence modelling, jet temperature, and flight velocity on the jet shock structure.

Dash, S. M.↗