SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The paper presents an approximation framework for computation (in finite dimensional spaces) of Riccati operators that can be guaranteed to converge to the Ricccati operator in feedback controls for abstract evolution systems in a Hilbert space. It is shown how these results may be used in the linear optimal regulator problem for a large class of parabolic systems.
Long-focal-length parabolic mirrors fabricated economically by rotational casting. Technique applies to very large mirrors and incorporates new foam/fiberglass techniques ideal for producing rigid, lightweight mirrors. Process developed to produce mirrors that concentrate Sunlight for solarpumped laser.
Software for data archiving and data display was developed for use on a Digital Equipment Corporation (DEC) PDP-11/34A minicomputer for use with the JPL-designed flux mapper. The flux mapper is a two-dimensional, high radiant energy scanning device designed to measure radiant flux energies expected at the focal point of solar parabolic dish concentrators. Interfacing to the DEC equipment was accomplished by standard RS-232C serial lines. The design of the software was dicated by design constraints of the flux-mapper controller. Early attemps at data acquisition from the flux-mapper controller were not without difficulty. Time and personnel limitations result in an alternative method of data recording at the test site with subsequent analysis accomplished at a data evaluation location at some later time. Software for plotting was also written to better visualize the flux patterns. Recommendations for future alternative development are discussed. A listing of the programs used in the anaysis is included in an appendix.
A parabolized implicit Navier-Stokes algorithm which is of second-order accuracy in both the cross flow and marching directions is presented. The algorithm is used to analyze three model supersonic flow problems (the flow over a 10-degree edge). The results are found to be in good agreement with the results of other techniques available in the literature.
A pseudospectral explicit scheme for solving linear, periodic, parabolic problems is described which has infinite accuracy both in time and in space. The high accuracy is achieved while the time resolution parameter M ( = ) (1/delta t) for time marching algorithm) and the space resolution parameter N B = O(1/detla x) have to satisfy M = O(N sup/+epsilon) epsilon O, compared to the common stability condition M = O(N sup 2) which has to be satisfied in any explicit finite order time algorithm.
A feasibility study was conducted to assess the applicability of an existing parabolic analysis (ADD-Axisymmetric Diffuser Duct), developed previously for subsonic viscous internal flows, to mixed supersonic/subsonic flows with heat addition simulating a SCRAMJET combustor. A study was conducted with the ADD code modified to include additional convection effects in the normal momentum equation when supersonic expansion and compression waves were present. It is concluded from the present study that for the class of problems where strong viscous/inviscid interactions are present a global iteration procedure is required.
The three-dimensional compressible Navier-Stokes equations are formulated in a rotating coordinate system, so as to include centrifugal and Coriolis forces. The equations are parabolized by using a previously calculated inviscid static pressure field. The thin layer Navier-Stokes approximation, which neglects streamwise diffusion, is used. A body-fitted coordinate system is used. The streamwise momentum equation is uncoupled from the cross-stream momentum equation by using contravariant momentum components, and then using the contravariant velocity components as primary unknowns. To reduce problems with small separated regions, the Reyhner and Flugge-Lotz approximation is used. The energy equation is included to allow for calculation of heat transfer. The flow may be laminar, or a simple eddy-viscosity turbulence may be used. A number of curved ducts and an axial stator were analyzed, including cases for which experimental data are available.
The manufacturing cost of a General Electric 12 meter diameter concentrator was estimated. This parabolic dish concentrator for solar thermal system was costed in annual production volumes of 100 - 1,000 - 5,000 - 10,000 - 50,000 100,000 - 400,000 and 1,000,000 units. Presented for each volume are the costs of direct labor, material, burden, tooling, capital equipment and buildings. Also presented is the direct labor personnel and factory space requirements. All costs are based on early 1981 economics.
Asymptotic solutions of order k-n are developed for the equations governing the propagation of sound through a stratified moving medium. Here k is a dimensionless wave number and n is the arbitrary order of the approximation. These approximations are an extension of geometric acoustics theory and provide corrections to that theory in the form of multiplicative functions which satisfy parabolic partial differential equations. These corrections account for the diffraction effects caused by variation of the field normal to the ray path and the interaction of these transverse variations with the variation of the field along the ray. The theory is illustrated by application to simple examples.
A new algorithm for generating three-dimensional grids has been developed and implemented which numerically solves a parabolic partial differential equation (PDE). The solution procedure marches outward in two coordinate directions, and requires inversion of a scalar tridiagonal system in the third. Source terms have been introduced to control the spacing and angle of grid lines near the grid boundaries, and to control the outer boundary point distribution. The method has been found to generate grids about 100 times faster than comparable grids generated via solution of elliptic PDEs, and produces smooth grids for finite-difference flow calculations.
A new computational model (SCIPVIS) is described which predicts the multiple-cell wave/shock structure in underexpanded or overexpanded turbulent jets. SCIPVIS solves the parabolized Navier-Stokes jet-mixing equations utilizing a shock-capturing approach in supersonic regions of the jet and a pressure-split approach in subsonic regions. Turbulence processes are represented by the solution of compressibility-corrected two-equation turbulence models. SCIPVIS presently analyzes jets exhausting into a quiescent or supersonic external stream for which a single-pass spatial-marching solution can be obtained. The features of SCIPVIS are reviewed, and calculations are described exhibiting the influence of turbulence modelling, jet temperature, and flight velocity on the jet shock structure.
An approximation framework is presented for computation (in finite dimensional spaces) of Riccati operators that can be guaranteed to converge to the Riccati operator in feedback controls for abstract evolution systems in a Hilbert space. It is indicated how these results may be used in the linear optimal regulator problem for a large class of parabolic systems.
The case of a parabolic reflector and a point feed is considered, taking into account the question regarding the location in which the feed should be placed for an achievement of maximum directivity. Based on the tracing of geometrical rays, the obvious answer is obtained that the feed should be placed at the focal point. In the present paper, it is shown that this answer is not always correct. There are situations in which the maximum directivity is achieved when the feed is axially displaced toward the reflector or away from it. This 'focal shift' phenomenon is a result of three competing factors which affect the directivity of a reflector. The factors are related to phase synchronism over the reflector aperture, aperture illumination efficiency, and spillover loss. For achieving the maximum directivity, it is necessary to find the best compromise among the three factors.
A parabolic combustion code called CHARNAL was run for a variety of measured and estimated inlet boundary conditions. A parametric study was carried out to determine what compromises in accuracy would occur if estimated, rather than experimentally measured, inlet conditions were used and what values of the dissipation length scale would give the best results. The conclusions were that a dissipation length scale of approximately 0.03 gave the best results regardless of the type of inlet conditions used. Both subsonic and supersonic flow were examined and the effect of finite-rate versus equilibrium-chemistry calculations was briefly considered. No significant compromises in accuracy were found when estimated inlet boundary conditions were used.
The three-dimensional compressible Navier-Stokes equations are formulated in a rotating coordinate system, so as to include centrifugal and Coriolis forces. The equations are parabolized by using a previously calculated inviscid static pressure field. The thin layer Navier-Stokes approximation, which neglects streamwise diffusion, is used. A body-fitted coordinate system is used. The streamwise momentum equation is uncoupled from the cross-stream momentum equation by using contravariant momentum components, and then using the contravariant velocity components as primary unknowns. To reduce problems with small separating regions, the Reyhner and Flugge-Lotz approximation is used. The energy equation is included to allow for calculation of heat transfer. The flow may be laminar, or a simple eddy-viscosity turbulence may be used. A number of curved ducts and an axial stator were analyzed, including cases for which experimental data are available.
A feasibility study has been conducted to assess the applicability of an existing parabolic analysis (ADD-Axisymmetric Diffuser Duct), developed previously for subsonic viscous internal flows, to mixed supersonic/subsonic flows with heat addition simulating a SCRAMJET combustor. A study was conducted with the ADD code modified to include additional convection effects in the normal momentum equation when supersonic expansion and compression waves are present. A set of test problems with weak shock and expansion waves have been analyzed with this modified ADD method and stable and accurate solutions were demonstrated provided the streamwise step size was maintained at levels larger than the boundary layer displacement thickness. Calculations made with further reductions in step size encountered departure solutions consistent with strong interaction theory. Calculations were also performed for a flow field with a flame front in which a specific heat release was imposed to simulate a SCRAMJET combustor. In this case the flame front generated relatively thick shear layers which aggravated the departure solution problem. Qualitatively correct results were obtained for these cases using a marching technique with the convective terms in the normal momentum equation suppressed. It is concluded from the present study that for the class of problems where strong viscous/inviscid interactions are present a global iteration procedure is required.
A stable global-iteration procedure is applied to a fully implicit noniterative parabolized Navier-Stokes algorithm to improve the solutions of the single-sweep method as well as to resolve small separation bubbles due to shock-wave/boundary-layer interactions. A modified form of the FLARE approximation is employed in the separated regions and some requirements for stable iterations are discussed. The results of the global-iteration scheme for two test cases of supersonic internal flows are compared against the results of the single-sweep method as well as the results of the full Navier-Stokes solver.
Downstream marching iterative schemes for the solution of the Parabolized or Thin Layer (PNS or TL) Navier-Stokes equations are described. Modifications of the primitive equation global relaxation sweep procedure result in efficient second-order marching schemes. These schemes take full account of the reduced order of the approximate equations as they behave like the SLOR for a single elliptic equation. The improved smoothing properties permit the introduction of Multi-Grid acceleration. The proposed algorithm is essentially Reynolds number independent and therefore can be applied to the solution of the subsonic Euler equations. The convergence rates are similar to those obtained by the Multi-Grid solution of a single elliptic equation; the storage is also comparable as only the pressure has to be stored on all levels. Extensions to three-dimensional and compressible subsonic flows are discussed. Numerical results are presented.