Correlation of ocean surface parameters with radar backscattering data and theory
There are no author-identified significant results in this report.
Miller, L. S.↗
SEARCH · Search NASA
Results for “parameter correlations”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Correlation between some current parameters and optical radiation generated by 280 mm long laboratory sparks
Discussed here is the optical radiation generated by 280 mm long laboratory discharges and its relationship to the current flowing in the discharge channel. In an experiment, the optical radiation generated by the discharges was measured at wavelengths 777nm (bandwidth 10 nm) due to O I(1), and 500 nm (bandwidth 5 nm) due to N II(19), and the broadband optical radiation between the wavelengths 400 to 1100 nm. The shape of the current waveform, which had a rise time of 0.1 microsecond and a decay time of 5 microsecond, remained the same with increasing peak value. The experiment was conducted with peak current amplitudes in the range of 1-4 kA. In order to test the effect of current rise time on the optical radiation, researchers also conducted studies with a current waveform having a 5 microsecond rise time. It was observed that the peak amplitude of the optical radiation pulse at the wavelengths mentioned above is proportional to the peak amplitude of the current flowing through the discharge channel. The rise time of the optical radiation pulse at a given wavelength does not depend significantly on the peak amplitude of the current waveform. The rise time of the optical radiation pulse decreases with decreasing wavelength. A slight increase in the decay time of the optical pulse, at a given wavelength, is observed with increasing peak amplitude of the current waveform.The results show that the rise time of the optical radiation pulse increases with the increasing rise time of the current waveform. The relationship between peak current, peak optical power, and peak electrical power is studied. Also, the relationship between peak current, optical energy (400-1100 and 777 nm), and electrical energy is discussed.
Windmar, Dan↗
Molecular Static Third-Order Polarizabilities of Carbon-Cage Fullerenes and their Correlation with Three Geometric Parameters: Group Order, Aromaticity, and Size
Calculations were performed on the valence contribution to the static molecular third-order polarizabilities (gamma) of thirty carbon-cage fullerenes (C60, C70, five isomers of C78, and twenty-three isomers of C84). The molecular structures were obtained from B3LYP/STO-3G calculations. The values of the tensor elements and an associated numerical uncertainty were obtained using the finite-field approach and polynomial expansions of orders four to eighteen of polarization versus static electric field data. The latter information was obtained from semiempirical calculations using the AM1 hamiltonian.
Moore, Craig E.↗
Correlating Tc and Crystallographic Parameters in UTe2
Explore the source record for details and available documents.
Material Science↗
Influence of Finite Volume Effect on the Polyakov Quark–Meson Model
In the current work, we study the influence of a finite volume on Polyakov Quark–Meson model (PQM) order parameters, (fluctuations) correlations of conserved charges and the quark–hadron phase boundary. Our study of the PQM model order parameters and the (fluctuations) correlations of conserved charges indicates a sizable shift of the quark–hadron phase boundary to higher values of baryon chemical potential ( ) and temperature (T) for decreasing the system volume. The detailed study of such effect could have important implications for the extraction of the (fluctuations) correlations of conserved charges of the QCD phase diagram from heavy ion data.
79 ASTRONOMY AND ASTROPHYSICS↗
BATSE spectroscopy results
We present preliminary analyses of gamma-ray burst spectra from the BATSE Spectroscopy Detectors. Our conclusions are: (1) No spectral lines have yet been detected in BATSE data from any cosmic gamma-ray burst. This is not surprising as the data for few bright bursts is available, and previous experiments saw lines in only a small fraction of the bursts. (2) Burst spectra show emission up to 20 MeV, with four of eight examined bursts having significant spectral breaks from 1 to 2 MeV. These breaks are consistent with opacity effects due to the interaction of photons with a high magnetic field. (3) Various distance independent parameters from burst spectra and time histories have no correlation with parameters related to distance. In other words, bright bursts look the same as faint bursts. This places a strong constraint on two population models of bursts. (4) The detection time of individual photons is not correlated from detector to detector, as predicted by Mitrofanov's pulsed emission model.
Schaefer, Bradley E.↗
Space station configuration and flight dynamics identification
The Space Station will be assembled in low earth orbit by a combination of deployable and space erectable modules that are progressively integrated during successive flights of the Shuttle. The crew assisted space construction will result in a configuration which is a large scale composite of structural elements having connectivity with a wide range of possible end conditions and imprecisely known dynamic characteristics. The generic applications of Flight Dynamics Identification to the candidate Space Station configurations currently under consideration are described. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. Onboard implementation architecture and constraints are discussed from the viewpoint of maximizing integration of the Identification process with the flight subsystem's data and signal flow.
Metter, E.↗
Modeling of Supercritical CO2 Shell-and-Tube Heat Exchangers Under Extreme Conditions. Part I: Correlation Development
Abstract High-temperature supercritical CO2 Brayton cycles are promising possibilities for future stationary power generation and hybrid electric propulsion applications. Heat exchangers are critical components in supercritical CO2 thermal cycles and require accurate correlations and comprehensive performance modeling under extreme temperatures and pressures. In this paper (Part I), new Colburn and friction factor correlations are developed to quantify shell-side heat transfer and friction characteristics of flow within heat exchangers in the shell-and-tube configuration. Using experimental and computational fluid dynamics (CFD) data sets from existing literature, multivariate regression analysis is conducted to achieve correlations that capture the effect of multiple critical geometric parameters. These correlations offer superior accuracy and versatility as compared to previous studies and predict the thermohydraulic performance of about 90% of the existing experimental and CFD data within ±15%. Supplementary thermohydraulic performance data are acquired from CFD simulations with supercritical CO2 as working fluid to validate the developed correlations and demonstrate its capability to be applied to supercrtical CO2 heat exchangers.
Engineering↗
Parameter plane techniques applied to tactical missile control system design
Stability analysis parameter plane technique for tactical missile control system design, correlating variable parameters with characteristic equation roots location
Seltzer, S. M.↗
Comparative analysis of atmospheric parameters from high-resolution spectroscopic sky surveys: APOGEE, GALAH, Gaia -ESO
SDSS-IV APOGEE-2, GALAH, and Gaia-ESO are high-resolution, ground-based, multi-object spectroscopic surveys providing fundamental stellar atmospheric parameters and multiple elemental abundance ratios for hundreds of thousands of stars of the Milky Way. Data from these and other surveys contribute to investigations of the history and evolution of the Galaxy. We undertake a comparison between the most recent data releases of these surveys to investigate the accuracy and precision of derived parameters by placing the abundances on an absolute scale. We also discuss the correlations in parameter and abundance differences as a function of main parameters. Uncovering the variants provides a basis to continue the efforts of future sky surveys. Quality samples from the APOGEE-GALAH (15 537 stars), APOGEE-GES (804 stars), and GALAH-GES (441 stars) overlapping catalogs were collected. We investigated the mean variants between the surveys, and linear trends were also investigated. We compared the slope of correlations and mean differences with the reported uncertainties. The average and scatter of v rad , T eff , log g, [M/H], and v micro , along with numerous species of elemental abundances in the combined catalogs, show that in general there is a good agreement between the surveys. We find large radial velocity scatters ranging from 1.3 km s -1 to 4.4 km s -1 when comparing the three surveys. We observe some weak trends (e.g., in ΔT eff vs. Δlog g for the APOGEE-GES stars) and a clear correlation in the v micro - Δv micro planes in the APOGEE-GALAH common sample. For [α/H], [Ti/H] (APOGEE-GALAH giants), and [Al/H] (APOGEE-GALAH dwarfs) potential strong correlations are discovered as a function of the differences in the main atmospheric parameters, and we also find weak trends for other elements. In general we find good agreement between the three surveys within their respective uncertainties. However, there are certain regimes in which strong variants exist, which we discuss. There are still offsets larger than 0.1 dex in the absolute abundance scales.
79 ASTRONOMY AND ASTROPHYSICS↗
Correlation of Electric Field and Critical Design Parameters for Ferroelectric Tunable Microwave Filters
The correlation of electric field and critical design parameters such as the insertion loss, frequency ability return loss, and bandwidth of conductor/ferroelectric/dielectric microstrip tunable K-band microwave filters is discussed in this work. This work is based primarily on barium strontium titanate (BSTO) ferroelectric thin film based tunable microstrip filters for room temperature applications. Two new parameters which we believe will simplify the evaluation of ferroelectric thin films for tunable microwave filters, are defined. The first of these, called the sensitivity parameter, is defined as the incremental change in center frequency with incremental change in maximum applied electric field (EPEAK) in the filter. The other, the loss parameter, is defined as the incremental or decremental change in insertion loss of the filter with incremental change in maximum applied electric field. At room temperature, the Au/BSTO/LAO microstrip filters exhibited a sensitivity parameter value between 15 and 5 MHz/cm/kV. The loss parameter varied for different bias configurations used for electrically tuning the filter. The loss parameter varied from 0.05 to 0.01 dB/cm/kV at room temperature.
Subramanyam, Guru↗
Coated oxidizers for combustion stability in solid-propellant rockets
Experiments are conducted in a laboratory-scale (6.25-cm diameter) end-burning rocket motor with state-of-the-art, ammonium perchlorate hydroxy-terminated polybutadiene (HTPB), nonmetallized propellants. The concept of tailoring the stability characteristics with a small amount (less than 1 percent by weight) of COATING on the oxidizer is explored. The thermal degradation characteristics of the coat chemical are deduced through theoretical arguments on thermal diffusivity of the composite material (propellant). Several candidate coats are selected and propellants are cast. These propellants (with coated oxidizers) are fired in a laboratory-scale end-burning rocket motor, and real-time pressure histories are recorded. The control propellant (with no coating) is also tested for comparison. The uniformity of the coating, confirmed by SEM pictures and BET adsorption measurements, is thought to be an advance in technology. The frequency of bulk mode instability (BMI), the pressure fluctuation amplitudes, and stability boundaries are correlated with parameters related to the characteristic length (L-asterisk) of the rocket motor. The coated oxidizer propellants, in general, display greater combustion stability than the control (state-of-the-art). The correlations of the various parameters are thought to be new to a field filled with much uncertainty.
Helmy, A. M.↗
The Effects of Alloying Elements on the Continuous Cooling Transformation Behavior of 2¼Cr-1Mo Steels
The continuous cooling transformation (CCT) behavior of eight 2¼Cr-1Mo steels from a statistically designed matrix was determined. These steels contained two levels of carbon (0.07 and 0.16 wt.%), manganese (0.35 and 0.85%), chromium (1.5 and 2.8%), and molybdenum (0.3 and 1.25%). Each steel was tested in a quenching dilatometer at five to six cooling rates between 725 and 1.2 °C/min. For each CCT sample, the change in length, microstructure, and macrohardness were determined. The ferrite content was also measured for samples cooled near the ferrite nose. Pearson correlation and multiple regression analyses were performed for various CCT diagram parameters. The correlation analysis showed that carbon and chromium contents significantly affected the critical temperatures and the bainite and martensite transformation temperatures. Increasing carbon content significantly increased the hardness for the bainite and martensite range of cooling rates, but hardness at slower cooling rates was unaffected by alloying elements. Regression equations were obtained for the critical temperatures and the ferrite nose cooling rate.
36 MATERIALS SCIENCE↗
Numerical parameter optimizations of the Ignition and Growth model for a HMX plastic bonded explosive
We present here a novel method for optimizing parameters of the Ignition and Growth (I&G) reactive flow model for high explosives. The I&G model predicts the shock initiation response of explosives subjected to dynamic loading. However, calibrating the model is a time-consuming process because it has several parameters, typically requires multiple data sets, and there are no direct correlations between parameters and data. In this study, we couple a scalable optimization algorithm to simulations of shock initiation experiments in the multi-physics code ALE3D. We develop four I&G model parameter sets for the HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane)-based explosive LX-07 [90 wt. % HMX, 10 wt. % Viton A] based on minimizing the difference between calculations and measurements at the embedded pressure gauges in 1D gun shock experiments. Our study shows that a cost function based on both shock time of arrival and pressure pulse shape demonstrates the best agreement with experimental data.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantifying the Turbulent Entrainment‐Mixing Processes Based on Z ‐LWC Relationships of Cloud Droplets
Abstract Turbulent entrainment‐mixing processes profoundly influence the relationship between radar reflectivity factor and liquid water content ( Z ‐LWC) of cloud droplets. However, quantification of the entrainment‐mixing mechanisms based on the Z ‐LWC relationship is still lacking. To address this gap, 12,218 entrainment‐mixing cases are simulated using the Explicit Mixing Parcel Model. We examine the variations of the parameters in the power‐law relationship Z = a LWC b , and the relationship between parameter b and homogeneous mixing degree ( ψ ), a measure quantifying entrainment‐mixing processes. The results indicate that parameter b distributes within the range of 1–2, with a positive correlation between parameter b and ψ . The b ‐ ψ relationship is fitted, which connects the Z ‐LWC relationship for various entrainment‐mixing types. The results suggest the potential for employing a remote sensing approach to investigate the entrainment‐mixing mechanisms of non‐precipitating small cumulus/stratocumulus clouds, thereby overcoming the limitations of traditional observational studies that rely solely on aircraft observations.
54 ENVIRONMENTAL SCIENCES↗
Metabolic and cardiovascular adaptation, monkey. NASA SMD 3, project 76, experiment 44 conducted at NASA/JSC, 14-25 May 1977
The biomedical results from an experiment on a monkey subjected to space flight conditions are reported. A background history of the development and testing of an experiment system designed to permit measurement of physiological parameters in subhuman primates during continuous, comfortable, couch restraint for periods of up to 30 days is reviewed. Of major importance in the experimental design of the system was the use of a fiberglass pod, which could be sealed and subdivided into upper and lower parts, to monitor and control the physiological responses for various parts of the animal's body. The experiment was conducted within the Spacelab Simulator for a period of 11 days. Data recorded includes: Spacelab Simulator cabin temperature; ventilation rate; pod internal temperature; fraction percent oxygen; fraction percent carbon dioxide; oxygen consumption rate; carbon dioxide production rate; respiratory quotient; intrathoracic temperature; heart rate; mean aortic pressure; mean ventricular pressure; diurnal variation of parameters measured; comparison of mean preflight, flight, and postflight values of the parameters measured; and correlation matrix for the parameters measured.
Pace, N.↗
Self-consistent redshift estimation using correlation functions without a spectroscopic reference sample
ABSTRACT We present a new method to estimate redshift distributions and galaxy-dark matter bias parameters using correlation functions in a fully data driven and self-consistent manner. Unlike other machine learning, template, or correlation redshift methods, this approach does not require a reference sample with known redshifts. By measuring the projected cross- and auto-correlations of different galaxy sub-samples, e.g. as chosen by simple cells in colour–magnitude space, we are able to estimate the galaxy-dark matter bias model parameters, and the shape of the redshift distributions of each sub-sample. This method fully marginalizes over a flexible parametrization of the redshift distribution and galaxy-dark matter bias parameters of sub-samples of galaxies, and thus provides a general Bayesian framework to incorporate redshift uncertainty into the cosmological analysis in a data-driven, consistent, and reproducible manner. This result is improved by an order of magnitude by including cross-correlations with the cosmic microwave background and with galaxy–galaxy lensing. We showcase how this method could be applied to real galaxies. By using idealized data vectors, in which all galaxy-dark matter model parameters and redshift distributions are known, this method is demonstrated to recover unbiased estimates on important quantities, such as the offset Δz between the mean of the true and estimated redshift distribution and the 68 per cent, 95 per cent, and 99.5 per cent widths of the redshift distribution to an accuracy required by current and future surveys.
79 ASTRONOMY AND ASTROPHYSICS↗
Reversible motions and disordered structure of soft particles in amorphous solids
In amorphous solids, soft vibrational modes derived from normal mode analysis can be utilized to identify the soft particles that are prone to irreversible rearrangements. However, the normal mode analysis approach cannot explain why the spatial distributions of clustered soft particles do not change over time. We define a softness parameter based on the vibrational density of states calculated directly from molecular dynamics simulations with both the harmonic vibrations and anharmonic relaxations being properly captured at finite temperatures. This parameter spontaneously correlates with the real space atomic motions and the dynamics heterogeneity. Using the softness parameter, we show that the softest particles are confined within rigid cages. These particles keep rearranging reversibly without long-range diffusion. The moderately soft particles rearrange irreversibly, and the hard particles mainly participate in vibrations without rearrangement. Here, we also show that the soft particles form locally disordered structures, while the hard particles present strong ordering. These findings confirm the defective nature of soft particles, and provide insights on the nature of softness as the ability to rearrange, but not necessarily irreversibly.
36 MATERIALS SCIENCE↗