Search NASA⌕ Search

SEARCH · Search NASA

Results for “particle evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Cirrus crystal nucleation by homogeneous freezing of solution droplets

A numerical model consisting of a system of differential equations is used to study cirrus crystal nucleation in a rising parcel containing a distribution of cloud condensation nuclei. The evolution of the particle population and the thermodynamic variables in the parcel are examined. The results suggest that, if homogeneous freezing is not considered, liquid water should be detected below -40 C. If homogeneous freezing is considered, the rapid growth of ice crystals and vapor depletion prevent water saturation from being reached. It is shown that the likelihood of a droplet being frozen is increased by lower temperatures, larger droplet diameter, or lower solution density.

Heymsfield, Andrew J.↗

The radiative signature of the shock acceleration process in active galactic nuclei

A time-dependent model in which plasma enters a shock region and undergoes first-order Fermi acceleration is considered. The time evolution of the particle distribution and the associated synchrotron emission has been calculated for an energy-dependent diffusion coefficient. When the emitting region is not spatially resolved, the spectrum is a power law with an exponential turnover in frequency. With increasing time, the power law and the turnover extend to higher frequencies. To test the model, observations at three or more frequencies should be made of time-resolved flux increases from the optically thin nonthermal emission region in variable active galactic nuclei. Existing data that can be used to test the model are scarce but offer qualitative support.

Bregman, Joel N.↗

Formation of planetesimals in the solar nebula

The evolution of solid particles in the solar nebula (or other circumstellar disk) is described. Motions of bodies less than about 1 km in size were dominated by gas drag rather than gravity. An original population of microscopic grains had to produce greater than km-sized planetesimals before gravitational accretion of planets could begin. Planetesimals probably formed by coagulation of grain aggregates that collided due to differential settling, turbulence, and drag-induced orbital decay. Growth of such aggregates depended on sticking mechanisms and their mechanical properties, which are poorly understood. Their growth was aided by concentration of larger bodies toward the central plane of the disk. The nebula could remain optically thick during this process. It is unlikely that a particle layer formed by settling would undergo gravitational instability, as a small amount of turbulence would keep the particle layer from reaching the critical density. This conclusion is independent of the particle size, as even large bodies do not effectively decouple from the gas. Even in a laminar disk, shear in the particle layer would generate enough turbulence to keep it stirred up.

Weidenschilling, S. J.↗

Dust evolution from comets and asteroids: Their velocities at Earth orbit intersection

In this study on the evolution of dust particles from comets and asteroids, the effects of accurate many-body planetary motion on the gravitational perturbations of the dust grains are computed. In a computer simulation, dust grains of radius 10, 30, and 100 micron were released at perihelion passage from each of 36 different celestial bodies: 16 main asteroids, 15 short period comets with perihelion greater than 1 AU, and 5 short period comets with perihelion less than 1 AU. It is found that when dust grains evolve to intersection with the earth's orbit, they nearly always retain orbital characteristics indicative of their origins. Grains from main belt asteroids differ significantly in orbital characteristics, especially orbital eccentricity, from grains that evolve from comets.

Jackson, A. A.↗

Studies with Cluster upstream and downstream of the bow shock: An experimenter's perspective

Some open questions in the physics of bow shock formation, the evolution of the particle distributions from solar wind into the magnetosheath, and the acceleration of ions at the moment of the shock are summarized. A layout of the current situation is presented in view of recent theoretical developments and the new diagnostic tools provided by the Cluster mission. The transition of ions across the quasi-perpendicular bow shock and their downstream thermalization are discussed. The processes and spatial scales are found to be species dependent and are discussed for H(+), He(2+), and He(+). The theory of particle acceleration at quasi-parallel shocks are reviewed. It is shown how Cluster can study the time variable structures of the shock as predicted by hybrid simulation. It is emphasized that high time resolution measurement with simultaneous species separation is necessary for the study of the ion acceleration. Suggestions for the spacecraft separations at the bow shock are suggested.

Moebius, E.↗

Characterization of Aircraft Produced Soot and Contrails Near the Tropopause

Participation in the SUCCESS project primarily involved development and deployment of specific instruments for characterizing jet aircraft exhaust emissions as particulates and their subsequent evolution as contrail particles, either liquid or solid, as cirrus. Observations can be conveniently considered in two categories - close or distant from the aircraft. Thus close to the aircraft the exhaust is mixing through the engine turbulence with a much drier and colder environment and developing water/ ice supersaturation along the trail depending on circumstances (near field), whereas distant from the aircraft (far field) the exhaust has cooled essentially to ambient temperature, the turbulence has decayed and any particle growth or evaporation is controlled by the prevailing ambient conditions. Intermediate between these two regions the main aircraft vortices form (one on each side of the aircraft) which tend to inhibit mixing under some conditions, a region extending from a few aircraft lengths to sometimes a hundred times this distance. Our approach to the problem lay in experience gained in characterizing the smoke from hydrocarbon combustion in terms of its cloud forming properties and its potential influence on the radiation properties of the smoke and subsequent cloud from the viewpoint of reduction (absorbtion and scattering ) of solar radiation flux leading to significant global cooling (Hudson et al 1991; Hallett and Hudson 1991). Engine exhaust contains a much smaller proportion of the fuel carbon than is sometimes present in ordinary combustion (less than 0.01% compared with 10%) and influences condensation in quite different ways, to be characterized by the Cloud Condensation Nucleus, CCN - supersaturation spectrum. The transition to ice is to be related to the dilution of solution droplets to freeze by homogeneous nucleation at temperatures somewhat below -40C (Pueschel et al 1998). The subsequent growth of ice particles depends critically on temperature, supersaturation and to some extent pressure, as is demonstrated in an NSF funded project being carried out in parallel with the work reported here. As will be discussed below, nucleation processes themselves and also exhaust impurities also influence the growth of ice particles and may control some aspects of growth of ice in contrails. Instrumentation was designed to give insight into these questions and to be flown on the NASA DC- 8 as a platform. In addition a modest program was undertaken to investigate the properties of laboratory produced smoke produced under controlled conditions from the viewpoint of forming both CCN and CN. The composition of the smoke could inferred from a thermal characterization technique; larger particles were captured by formvar replicator for detailed analysis; ice particles were captured and evaporated in flight on a new instrument, the cloudscope, to give their mass, density and impurity content.

Hallett, John↗

Multiwavelength Observations of Mkn 501 During the 1997 High State

During the observation period 1977, the close Blazar Mkn 501 showed extremely strong emission and high variability. We examine multiwavelength aspects of this event using Radio optical, soft and hard X-ray and TeV data. We concentrate on the medium-timescale variability of the broadband spectra averaged over 1-week intervals. We confirm the previously found correlation between soft and hard X-ray emission and the at TeV energies while the source shows only minor variability at radio and optical wavelengths. The non-linear correlation between hard X-ray and TeV fluxes is consistent with a simple analytic estimate based on an SSC model in which Klein-Nishina effects are important for the highest-energy electrons in the jet and flux; variations are caused by variations of the electron density and/or the spectral index of the electron injection spectrum. The time-averaged spectra are fitted with an SSC dominated leptonic jet model using the full Klein-Nishina cross section and following the self-consistent evolution of relativistic particles along the jet accounting for gamma gamma absorption and pair production within the source as well as due to the intergalactic infrared red background radiation. The contribution from external inverse-Compton scattering is tightly constrained by the low maximum EGRET flux and found co be negligible.

Petry, D.↗

Dynamical Zodiacal Cloud Models Constrained by High Resolution Spectroscopy of the Zodiacal Light

We have developed a set of self-consistent dynamical models of the Zodiacal cloud, following the orbital evolution of dust particles. Three populations were considered, originating from the Kuiper belt, asteroids and comets. Using the models developed, we investigated how the solar spectrum is changed by scattering by the zodiacal cloud grains and compared the obtained spectra with the observations.

Ipatov, S. I.↗

Temporal Variations of Strength and Location of the South Atlantic Anomaly as Measured by RXTE

The evolution of the particle background at an altitude of approx.540km during the time interval between 1996 and 2007 is studied using the particle monitor of the High Energy X-ray Timing Experiment on board NASA's Rossi X-ray Timing Explorer. A special emphasis of this study is the location and strength of the South Atlantic Anomaly (SAA). The size and strength of the SAA are anti-correlated with the the 10.7 cm radio flux of the Sun, which leads the SAA strength by approx.1 year reflecting variations in solar heating of the upper atmosphere. The location of the SAA is also found to drift westwards with an average drift rate of about 0.3deg/yr following the drift of the geomagnetic field configuration. Superimposed to this drift rate are irregularities, where the SAA suddenly moves eastwards and where furthermore the speed of the drift changes. The most prominent of these irregularities is found in the second quarter of 2003 and another event took place in 1999. We suggest that these events are previously unrecognized manifestations of the geomagnetic jerks of the Earth's magnetic field. Key words: space radiation environment, South Atlantic Anomaly, radiation monitors, Rossi X-ray Timing Explorer

Wilms, Jorn↗

Structure of the Edgeworth-Kuiper Belt (EKB) Dust Disk and Implications for Extrasolar Planet(s) epsilon Eridani

Numerical simulations of the orbital evolution of dust particles from Edgeworth-Kuiper Belt (EKB) objects show that the three giant planets, Neptune, Jupiter, and Saturn impose distinct and dramatic signatures on the overall distribution of EKB dust particles. The features are very similar to those observed in the dust disk around the nearby star Eridani. Numerical simulations of dust particles in the epsilon Eridani system show that planetary perturbations may be responsible for the observed features

Liou, J. -C.↗

Laboratory Annealing Experiments Of Refractory Silicate Grain Analogs Using Differential Scanning Calorimetry

Exothermic reactions during the annealing of laboratory synthesized amorphous magnesium-bearing silicate particles used as grain analogs of cosmic dust were detected by differential scanning calorimetry (DSC) in air. With infrared spectroscopy and transmission electron microscopy, we show that cosmic dust could possibly undergo fusion to larger particles, with oxidation of magnesium silicide and crystallization of forsterite as exothermic reactions in the early solar system. The reactions begin at approximately 425, approximately 625, and approximately 1000 K, respectively, and the reaction energies (enthalpies) are at least 727, 4151, and 160.22 J per gram, respectively. During the crystallization of forsterite particles, the spectral evolution of the 10 micrometer feature from amorphous to crystalline was observed to begin at lower temperature than the crystallization temperature of 1003 K. During spectral evolution at lower temperature, nucleation and/or the formation of nanocrystallites of forsterite at the surface of the grain analogs was observed.

Kimura, Yuki↗

Multi-Scale Modelling of the Bound Metal Deposition Manufacturing of Ti6Al4V

Nonlinear shrinkage of the metal part during manufacturing by bound metal deposition, both on the ground and under microgravity, is considered. A multi-scale physics-based approach is developed to address the problem. It spans timescales from atomistic dynamics on the order of nanoseconds to full-part shrinkage on the order of hours. This approach enables estimation of the key parameters of the problem, including the widths of grain boundaries, the coefficient of surface diffusion, the initial redistribution of particles during the debinding stage, the evolution of the microstructure from round particles to densely-packed grains, the corresponding changes in the total and chemical free energies, and the sintering stress. The method has been used to predict shrinkage at the levels of two particles, of the filament cross-section, of the sub-model, and of the whole green, brown, and metal parts.

Nonlinear shrinkage↗

Characteristics and Influence of Biosmoke on the Fine-Particle Ionic Composition Measured in Asian Outflow during the Transport and Chemical Evolution Over the Pacific (TRACE-P) Experiment

We investigate the sources, prevalence, and fine-particle inorganic composition of biosmoke over the western Pacific Ocean between 24 February and 10 April 2001. The analysis is based on highly time-resolved airborne measurements of gaseous and fine- particle inorganic chemical composition made during the NASA Transport and Chemical Evolution over the Pacific (TRACE-P) experiment. At latitudes below approximately 25 deg. N, relatively pure biomass burning plumes of enhanced fine-particle potassium, nitrate, ammonium, light-absorbing aerosols, and CO concentrations were observed in plumes that back trajectories and satellite fire map data suggest originated from biomass burning in southeast Asia. Fine-particle water-soluble potassium (K+) is confirmed to be a unique biosmoke tracer, and its prevalence throughout the experiment indicates that approximately 20% of the TRACE-P Asian outflow plumes were influenced, to some extent, by biomass or biofuel burning emissions. At latitudes above 25 deg. N, highly mixed urban/industrial and biosmoke plumes, indicated by SO(sup 2, sub 4) and K+, were observed in 5 out of 53 plumes. Most plumes were found in the Yellow Sea and generally were associated with much higher fine-particle loadings than plumes lacking a biosmoke influence. The air mass back trajectories of these mixed plumes generally pass through the latitude range of between 34 deg. and 40 deg. N on the eastern China coast, a region that includes the large urban centers of Beijing and Tianjin. A lack of biomass burning emissions based on fire maps and high correlations between K+ and pollution tracers (e.g., S(sup 2, sub 4) suggest biofuel sources. Ratios of fine-particle potassium to sulfate are used to provide an estimate of relative contributions of biosmoke emissions to the mixed Asian plumes. The ratio is highly correlated with fine-particle volume (r(sup 2) = 0.85) and predicts that for the most polluted plume encounter in TRACE-P, approximately 60% of the plume is associated with biosmoke emissions. On average, biosmoke contributes approximately 35-40% to the measured fine inorganic aerosol mass in the mixed TRACE-P plumes intercepted north of 25% latitude.

Ma, Y.↗

Particle acceleration in solar flares - Observations

Contrary to our historical understanding, the energetic particles in most major solar proton events do not come from the flare itself. The particle abundances, ionization states, time evolution, and longitude distributions all indicate that the particles are accelerated from the ambient plasma by a shock wave driven by a coronal mass ejection in these events. In contrast, the particles that do come from impulsive solar flares are unique in character. These particles are electron rich, have He-3/He-4 enhancements of up to 10,000, and enhancements in heavy elements such as Fe/C by factors of 10. The high ionization state of Fe, +20 indicates that the material has been heated to temperatures of about 2 x 10 exp 7 K. It is generally believed that preferential heating by selective absorption of plasma waves is combined with stochastic acceleration in these events. Recent studies of the broad gamma-ray lines emitted by energetic particles within the flare loops indicate that they are also Fe-rich, He-3 rich and proton-poor like the particles seen at 1 AU. In large impulsive events, particles from the impulsive phase may be reaccelerated by a coronal blast-wave shock.

Reames, Donald V.↗

Pedestal particle balance studies in JET-ILW H-mode plasmas

JET-ILW type I ELMy H-modes at 2.5 MA/2.8 T with constant NBI heating (23 MW) and gas fuelling rate were performed, utilising edge localised mode (ELM) pacing by vertical kicks and plasma shaping (triangularity, δ) as tools to disentangle the effects of ELMs, inter-ELM transport and edge stability on the pedestal particle balance. In agreement with previous studies, the pedestal confinement improves with increasing δ, mostly due to a significant increase in pedestal density while the ELM frequency ($f_{\mathrm{ELM}}$) is decreased. Improved pedestal confinement with increasing δ was observed even when the pedestal MHD stability was degraded artificially by vertical kicks, implying that increased triangularity may favourably affect the inter-ELM pedestal recovery. The workflow developed to quantify the pedestal particle balance uses high time-resolution profile reflectometry to characterise the inter-ELM evolution of the plasma particle content ($\mathrm{d} N/\mathrm{d}t$), the NEO drift-kinetic solver to evaluate the neoclassical fluxes and interpretative EDGE2D-EIRENE simulations to estimate the edge particle source. The edge particle source is then constrained by deuterium Balmer-α line intensity measurements in the main chamber, which are, however, strongly affected by reflections from the metal walls. The reflections are accounted for by the CHERAB code taking the divertor emission (the brightest light source in the torus) distribution from imaging spectroscopy measurements as input. Our analysis shows that in the second half of the ELM cycle, the volume-integrated particle source is larger than $\mathrm{d} N/\mathrm{d}t$, indicating that transport plays a key role in the inter-ELM pedestal recovery.

fuelling↗

Assessing Stratospheric Aerosols Contamination Due to Space Activities

The life cycle of a spacecraft starts and ends in the atmosphere: it interacts with the atmosphere right after the launch and during the atmospheric reentry when it usually mostly ablates. Both phases induce emissions of gases and solid particles, providing a source of these components in the middle atmosphere. Little is known about the exact nature, composition and effects of these emissions on the atmosphere and climate, but their impact is expected to rise as more and more orbiting satellites are launched. Ever since the years 2000, the number of space rockets launched per year has increased by a factor 3 globally. At the same time, the number of satellites launched in orbit around the Earth per year has been multiplied by about 30. One may wonder whether changes in the anthropogenic material injected in the terrestrial stratosphere can be detected and what its influence may be. In order to study the cosmic dust particles arriving on Earth, the NASA Johnson Space Center (JSC) has been systematically collecting solid dust particles from the Earth’s stratosphere by aircraft equipped with dedicated particle collectors since 1981. So far, 25 catalogs have been published, covering campaigns of collection from 1981 to 2020, with a total of 5071 solid particles that have been preliminary characterized and curated. In this work, we use the preliminary classification of the dust particles. Based on SEM images and X-ray EDS composition the collected dust is separated into four groups: C (Cosmic), TCN (Terrestrial Contaminant Natural), TCA (Terrestrial Contaminant Artificial) and AOS (Aluminum Oxide Sphere). The AOS being mostly generated by solid rocket propellant, they also belong to the TCA class. Our analysis of the data published indicates that from 1980 to 2009 the cosmic dust particles typically represent on average 40% of the collection with TCA and TCN corresponding to about 30% each. In the recent years, the TCA fraction has doubled to about 60% of the collection (2010-2020). This increase in anthropogenic particles is likely due to the overall human space activity and its recent increase. We will present the properties of the solid stratospheric dust particles collected and their evolution with time. Future work will be dedicated to better classify the natural and anthropogenic particles collected and described in the existing databases. We will use numerical modelling to produce quantitative estimates of the injected mass, the lifetime of particles in the middle atmosphere (stratosphere) and the relative abundance of the anthropogenic particles with respect to the stratospheric background particle population.

J Lasue↗

The Thermal Response of a Packed Bed Thermal Energy Storage System upon Saturated Steam Injection Using Distributed Temperature Sensing

The effectiveness of a thermal energy storage (TES) system is typically characterized with the help of thermal stratification or temperature gradients along the direction of heat injection, which is typically the flow direction of heat transfer fluid. The steepness of temperature gradients are a direct indicator of the effectiveness or efficiency of the heat storage or dispatch process. The temperature gradient evolution along the packed bed of ceramic particles upon saturated steam injection is presented in this work. Distributed temperature sensing based on optical frequency domain reflectometry was deployed in a packed bed of ceramic particles to capture the thermal front evolution in the axial direction. The physical processes accompanying steam injection in packed beds are complex due to phase change, transitioning two-phase flow, and changes in condensate accumulation. Therefore, the variation of thermal response of the TES system for various steam injection flow rates was experimentally studied using a high-resolution distributed temperature sensing system in a chemically inert alumina particle-packed bed. Distinct zones of different heat transfer modes were observed during the steam injection experiments. A distinct conduction zone, evident from diffuse thermal fronts, was observed at low flow rates, and these thermal gradients became sharper as the flow rate increased. The diffuse thermal fronts in the heat storage media suggest a low exergy efficiency of the TES system, as energy losses started initiating before a significant fraction of the bed was saturated with steam.

25 ENERGY STORAGE↗

Blade-Type Reaction Front in Micrometer-Sized Germanium Particles during Lithiation

To investigate the lithium transport mechanism in micrometer-sized germanium (Ge) particles, in situ focused ion beam-scanning electron microscopy was used to monitor the structural evolution of individual Ge particles during lithiation. Our results show that there are two types of reaction fronts during lithiation, representing the differences of reactions on the surface and in bulk. Further, the cross-sectional SEM images and transmission electron microscopy characterizations show that the interface between amorphous Li x Ge and Ge has a wedge shape because of the higher Li transport rate on the surface of the particle. The blade-type reaction front is formed at the interface of the amorphous Li x Ge and crystalline Ge and is attributed to the large strain at the interface.

25 ENERGY STORAGE↗