SEARCH · Search NASA
Results for “phase transformations”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Transmission electron microscopic investigation of the {beta}{sub 1}{yields}{beta} phase transformation in a Mg-Dy-Nd alloy
The phase transformation of {beta}{sub 1}{yields}{beta} in a Mg-Dy-Nd alloy was studied by TEM. The {beta}{sub 1} phase, forming as plates parallel to {l_brace}1100{r_brace}{sub {alpha}}, has an f.c.c structure, with a {approx} 0.74 nm, and an orientation relationship that may be described by (111){sub {beta}1}//(1120){sub {alpha}}, (110){sub {beta}1}//(0001){sub {alpha}}. The equilibrium phase {beta}, forming as plates parallel to {l_brace}1100{r_brace}{sub {alpha}}, has an ordered f.c.c structure, with a {approx} 2.223 nm, and the orientation relationship between {beta} and the matrix phase is identical to that observed between {beta}{sub 1} and matrix phase. Both phases are interconnected according to the orientation relationship: (111){sub {beta}}//(111){sub {beta}1} and (110){sub {beta}}//(110){sub {beta}1}.
Atomic Insight into the Layered/Spinel Phase Transformation in Charged LiNi 0.80 Co 0.15 Al 0.05 O 2 Cathode Particles
Layered LiNi 0.80 Co 0.15 Al 0.05 O 2 (NCA) holds great promise as a potential cathode material for high energy density lithium ion batteries. However, its high capacity is heavily dependent on the stability of its layered structure, which suffers from a severe structure degradation resulting from a not fully understood layered → spinel phase transformation. Using high-resolution transmission electron microscopy and electron diffraction, we probe the atomic structure evolution induced by the layered → spinel phase transformation in the NCA cathode. We show that the phase transformation results in the development of a particle structure with the formation of complete spinel, spinel domains, and intermediate spinel from the surface to the subsurface region. The lattice planes of the complete and intermediate spinel phases are highly interwoven in the subsurface region. The layered → spinel transformation occurs via the migration of transition metal (TM) atoms from the TM layer into the lithium layer. Incomplete migration leads to the formation of the intermediate spinel phase, which is featured by tetrahedral occupancy of TM cations in the lithium layer. Finally, the crystallographic structure of the intermediate spinel is discussed and verified by the simulation of electron diffraction patterns.
Self-Assembled Periodic Nanostructures Using Martensitic Phase Transformations
We describe a novel approach for the rational design and synthesis of self-assembled periodic nanostructures using martensitic phase transformations. We demonstrate this approach in a thin film of perovskite SrSnO 3 with reconfigurable periodic nanostructures consisting of regularly spaced regions of sharply contrasted dielectric properties. The films can be designed to have different periodicities and relative phase fractions via chemical doping or strain engineering. The dielectric contrast within a single film can be tuned using temperature and laser wavelength, effectively creating a variable photonic crystal. Our results show the realistic possibility of designing large-area self-assembled periodic structures using martensitic phase transformations with the potential of implementing "built-to-order" nanostructures for tailored optoelectronic functionalities.
A Phase-Field Model for Phase Transformations in Glass-Forming Alloys
A phase-field model is proposed for phase transformations in glass-forming alloys. The glass transition is introduced as a structural relaxation, and the competition between the glass and crystalline phases is investigated. The simulations are performed for Cu-Zr alloys, employing thermodynamic and kinetic parameters derived from reported thermodynamic modeling and molecular dynamics simulation results,[1–3] respectively. Four distinct phase fields are treated with a multi-phase-field approach, representing the liquid/glass, Cu10Zr7, CuZr, and CuZr2 phases. In addition, a continuum-field method is applied to the liquid to accommodate the liquid–glass transformation. The combined phase-field approach is used to investigate the glass formation tendency, and critical cooling rates are estimated and compared with the reported experimental values.
Phase transformation mechanism in irradiation-induced superlattice formation
Atomic kinetic Monte Carlo simulations were used to model void superlattice formation under irradiation in molybdenum, driven by anisotropic diffusion of self-interstitial atoms. A change in the phase transformation mechanism from nucleation and growth to spinodal decomposition occurred with increasing dose rate, with both mechanisms leading to superlattice formation. Analysis of a rate-theory based analytical model showed that an observed change in the kinetics of vacancy accumulation, the appearance of a region of positive second derivative in the plot of average vacancy concentration versus time, was caused by the onset of spinodal instability. Further, the analytical model showed that for molybdenum and several other metals where void superlattice formation is commonly observed, the phase transformation likely occurs by nucleation and growth. However, nickel may offer the possibility of experimental observation of the transition between phase transformation mechanisms.
Understanding the role of carbon atoms on microstructure and phase transformation of high Nb containing TiAl alloys
The microstructure and solidification behavior of high Nb containing TiAl alloys with the composition of Ti-46Al-8Nb-xC (x = 0.1, 0.7, 1.4, 2.5 at.%) prepared by arc-melting method have been investigated in this work. The results give evidence that the addition of carbon changes the solidification behavior from solidification via the β phase to the peritectic solidification. And carbon in solid solution enriches in the α{sub 2} phase and increases the microhardness. As the carbon content increases to 1.4 at.%, plate-shape morphology carbides Ti{sub 2}AlC (H phase) precipitate from the TiAl matrix which leads to the refinement microstructure. By aging at 1173 K for 24 h after quenching treatment, fine needle-like and granular shape Ti{sub 3}AlC (P phase) carbides are observed in the matrix of Ti-46Al-8Nb-2.5C alloy, which distribute along the lamellar structure or around the plate-shape Ti{sub 2}AlC. Transmission electron microscope observation shows that the Ti{sub 3}AlC carbides precipitate at dislocations. The phase transformation in-situ observations indicate that the Ti{sub 2}AlC carbides partly precipitate during the solid state phase transformation process. - Highlights: •Carbon changes the solidification behavior from β phase to peritectic solidification. •Dislocations in solution treated γ phase act as nucleation sites of Ti{sub 3}AlC precipitations. •Ti{sub 3}AlC precipitates as fine needle-like or granular shape in the solution treated matrix. •Ti{sub 2}AlC carbides precipitate during the solid state phase transformation process.
Thermal Stability and Phase Transformation of Electrochemically Charged/Discharged LiMnPO4 Cathode for Li-Ion Battery
Electrochemically active LiMnPO4 nanoplate at lithiated/delithiated state were subjected to thermal stability and phase transformation evaluate for safety as a cathode material for Li-ion battery. The phase transformation and oxygen evolution temperature on the delithiated MnPO4 were characterized using in-situ hot-stage X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), thermogravimetric - differential scanning calorimetry - mass spectroscopy (TGA-DSC-MS), transmission electron microscopy and scanning electron microscopy (SEM) - energy dispersive X-ray analysis (EDAX).
The Effect Stacking Fault Segregation and Phase Transformations have on Creep Strength in Ni-based Superalloys
In this study, two commercially similar polycrystalline Ni-based disk superalloys (LSHR and ME3) were creep tested at 760C and 552MPa to approximately 0.3% plastic strain. LSHR consistently displayed superior creep properties at this stress/temperature regime even though the microstructural characteristics between the two alloys were comparable. High resolution structural and chemical analysis, however, revealed significant differences between the two alloys among active gamma prime shearing modes involving superlattice intrinsic and extrinsic stacking faults. In ME3, Co and Cr segregation and Ni and Al depletion were observed along the intrinsic faults - revealing a gamma prime -to- gamma phase transformation. Conversely in LSHR, an alloy with a higher W content, Co and W segregation was observed along the intrinsic faults. This observation combined with scanning transmission electron microscopy (STEM) simulations confirm a gamma prime-to-D019 phase transformation along the intrinsic faults in LSHR. Using experimental observations and density functional theory calculations, a novel local phase transformation strengthening mechanism is proposed that could be further utilized to improve the high temperature creep capabilities of Ni-base disk alloys.
The self-healing of defects induced by the hydriding phase transformation in palladium nanoparticles
Nanosizing can dramatically alter material properties by enhancing surface thermodynamic contributions, shortening diffusion lengths, and increasing the number of catalytically active sites per unit volume. These mechanisms have been used to explain the improved properties of catalysts, battery materials, plasmonic materials, etc. Here we show that Pd nanoparticles also have the ability to self-heal defects in their crystal structures. Using Bragg coherent diffractive imaging, we image dislocations nucleated deep in a Pd nanoparticle during the forward hydriding phase transformation that heal during the reverse transformation, despite the region surrounding the dislocations remaining in the hydrogen-poor phase. We show that defective Pd nanoparticles exhibit sloped isotherms, indicating that defects act as additional barriers to the phase transformation. Our results resolve the formation and healing of structural defects during phase transformations at the single nanoparticle level and offer an additional perspective as to how and why nanoparticles differ from their bulk counterparts.
Electrochemically-Driven Phase Transformations in Battery Compounds (Final Technical Report)
Ion-insertion compounds for advanced batteries frequently exhibit phase transformations as the concentration of the working ion varies. Under the large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium and exhibit phase transition behavior not seen in other materials. An improved understanding of phase transformation pathways in electrode materials upon cycling will lead to new materials design concepts and electrochemical duty cycle management strategies that improve capacity utilization at high charge/discharge rates, reduce voltage and capacity hysteresis, and extend battery life. The main goal of this project is to develop a predictive understanding of the phase transition behavior of battery compounds when electrochemically driven far from equilibrium through a combined experimental- theoretical approach. Research focuses on elucidating how the phase transition behaviors in a diverse group of selected model systems (olivines, lithium metal, etc.) are regulated by various factors including transformation strains, plasticity, metastable transformation pathways, electrode microstructure, surface reaction and ion diffusion kinetics, and what are the unique features of phase transitions in battery compounds. To this end, operando X-ray-based characterization techniques are applied to interrogate the structure and composition evolution of electrode materials and interfaces at nano- and meso-scales. Mesoscale modeling techniques such as phase-field simulation are employed to shed light on the experimental observations and establish a unified framework for describing phase transition behaviors in battery compounds.
First-principles calculations of pressure-induced phase transformation in AlN and GaN
Ab initio total energy calculations have been carried out to study pressure-induced wurtzite and zinc-blende to rocksalt phase transformation in AlN and GaN. The effects of d electrons on the phase transition pressure and pressure coefficients of band gap have been studied. It is shown that the presence of Ga 3d electrons do have a certain effect on the transition pressure, while other factors such as the variation of charge distribution with pressure should also be considered to explain the higher phase transition pressure for GaN than AlN. Our calculations also show that Ga 3d electrons affect the pressure coefficients of band gap slightly.
Origin for electrochemically driven phase transformation in the oxygen electrode for a solid oxide cell
The next generation of fuel cells, electrolyzers, and batteries requires higher power, faster kinetics, and larger energy density, which necessitate the use of compositionally complex oxides to achieve multifunctionalities and activity. These compositionally complex oxides may change their phases and structures during an electrochemical process—a so-called “electrochemically driven phase transformation.” The origin for such a phase change has remained obscure. The aim of this paper is to present an experimental study and a theoretical analysis of phase evolution in praseodymium nickelates. Nickelate-based electrodes show up to 60 times greater phase transformation during operation when compared with thermally annealed ones. Theoretical analysis suggests that the presence of a reduced oxygen partial pressure at the interface between the oxygen electrode and the electrolyte is the origin for the phase change in an oxygen electrode. Guided by the theory, the addition of the electronic conduction in the interface layer leads to the significant suppression of phase change while improving cell performance and performance stability.
Phase transformation near the classical limit of stability
Successful theories of phase transformation processes include classical nucleation theory (CNT), which envisions a local equilibrium between coexisting phases, and non--equilibrium kinetic cluster theories. Using computer simulations of the magnetization reversal of the Ising model in three different ensembles we make quantitative connections between these physical pictures. We show that the critical nucleus size of CNT is strongly correlated with a dynamical measure of metastability, and that the metastable phase persists to thermodynamic conditions previously thought of as unstable.
Isomorphic phase transformation in shocked cerium using molecular dynamics
Cerium (Ce) undergoes a significant ({approx}16%) volume collapse associated with an isomorphic fcc-fcc phase transformation when subject to compressive loading. We present here a new Embedded Atom Method (EAM) potential for Cerium that models two minima for the two fcc phases. We show results from its use in Molecular Dynamics (MD) simulations of Ce samples subjected to shocks with pressures ranging from 0.5 to 25 GPa. A split wave structure is observed, with an elastic precursor followed by a plastic wave. The plastic wave causes the expected fcc-fcc phase transformation. Comparisons to experiments and MD simulations on Cesium (Cs) indicate that three waves could be observed. The construction of the EAM potential may be the source of the difference.
Phase transformations, heat evolution, and atomic diffusion during slow heating of Al-rich Al/Zr multilayered foils
We describe the energy and sequence of phase transformations in multilayered Al/Zr foils with atomic ratios of 3 Al:1 Zr during low temperature (<350 °C) heat treatments in a differential scanning calorimeter. The initial phase formed is an Al-rich amorphous phase that appears to grow by Zr diffusion through the amorphous phase. The subsequent nucleation and growth of tetragonal Al{sub 3}Zr along the Al/amorphous layer interface is mediated by Al diffusion through the crystalline intermetallic phase. Diffusion coefficients associated with these processes are higher than expected from reports of diffusivities measured at higher temperatures. The inferred heat of formation of the tetragonal Al{sub 3}Zr phase is 1240 ± 40 J/g (53 ± 2 kJ/mol atom). No anomalous variation in the energy or sequence of phase transformations is found with bilayer thickness for samples with bilayer thickness in the range of 17 nm to 90 nm despite anomalies in the bilayer dependence of self-propagating reaction velocities in the same foils.
Phase transformation during mechano-synthesis of nanocrystalline/amorphous Fe–32Mn–6Si alloys
Mechano-synthesis of Fe–32Mn–6Si alloy by mechanical alloying of the elemental powder mixtures was evaluated by running the ball milling process under an inert argon gas atmosphere. In order to characterize the as-milled powders, powder sampling was performed at predetermined intervals from 0.5 to 192 h. X-ray florescence analyzer, X-ray diffraction, scanning electron microscope, and high resolution transmission electron microscope were utilized to investigate the chemical composition, structural evolution, morphological changes, and microstructure of the as-milled powders, respectively. According to the results, the nanocrystalline Fe–Mn–Si alloys were completely synthesized after 48 h of milling. Moreover, the formation of a considerable amount of amorphous phase during the milling process was indicated by quantitative X-ray diffraction analysis as well as high resolution transmission electron microscopy image and its selected area diffraction pattern. It was found that the α-to-γ and subsequently the amorphous-to-crystalline (especially martensite) phase transformation occurred by milling development. - Graphical abstract: Mechano-synthesis of nanocrystalline/amorphous Fe–32Mn–6Si shape memory alloys in the powder form: amorphous phase formation, α-to-γ phase transformation, mechano-crystallization of the amorphous, and martensite phase formation during the process. Highlights: • During MA, the α-to-γ phase transformation and amorphization occurred. • Mechano-crystallization of the amorphous phase occurred at sufficient milling time. • The formation of high amount of ε-martensite was evidenced at high milling times. • The platelet, spherical, and then irregular particle shapes was extended by MA. • By MA, the particles size was increased, then reduced, and afterward re-increased.
Understanding Strain‐Induced Phase Transformations in BiFeO 3 Thin Films
Experiments demonstrate that under large epitaxial strain a coexisting striped phase emerges in BiFeO 3 thin films, which comprises a tetragonal‐like ( T ′) and an intermediate S ′ polymorph. It exhibits a relatively large piezoelectric response when switching between the coexisting phase and a uniform T ′ phase. This strain‐induced phase transformation is investigated through a synergistic combination of first‐principles theory and experiments. The results show that the S ′ phase is energetically very close to the T ′ phase, but is structurally similar to the bulk rhombohedral ( R ) phase. By fully characterizing the intermediate S ′ polymorph, it is demonstrated that the flat energy landscape resulting in the absence of an energy barrier between the T ′ and S ′ phases fosters the above‐mentioned reversible phase transformation. This ability to readily transform between the S ′ and T ′ polymorphs, which have very different octahedral rotation patterns and c / a ratios, is crucial to the enhanced piezoelectricity in strained BiFeO 3 films. Additionally, a blueshift in the band gap when moving from R to S ′ to T ′ is observed. These results emphasize the importance of strain engineering for tuning electromechanical responses or, creating unique energy harvesting photonic structures, in oxide thin film architectures.