Search NASA⌕ Search

SEARCH · Search NASA

Results for “placement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Stepwise Assembly of Turn‐on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

Abstract The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn‐on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene‐based fluorescent linker and a hemicyanine‐containing CN − ‐responsive linker were sequentially installed into the lattice of PCN‐700. The selective binding of CN − to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn‐on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine‐tuned in order to maximize the sensitivity of the overall framework. The optimized MOF‐sensor had a CN − ‐detection limit of 0.05 μ m , which is much lower than traditional CN − fluorescent sensors (about 0.2 μ m ).

Li, Jialuo↗
DOE OSTI2020

Ethylene Dehydroaromatization over Ga‐ZSM‐5 Catalysts: Nature and Role of Gallium Speciation

Abstract Bifunctional catalysis in zeolites possessing both Brønsted and Lewis acid sites offers unique opportunities to tailor shape selectivity and enhance catalyst performance. Here, we examine the impact of framework and extra‐framework gallium species on enriched aromatics production in zeolite ZSM‐5. We compare three distinct methods of preparing Ga‐ZSM‐5 and reveal direct (single step) synthesis leads to optimal catalysts compared to post‐synthesis methods. Using a combination of state‐of‐the‐art characterization, catalyst testing, and density functional theory calculations, we show that Ga Lewis acid sites strongly favor aromatization. Our findings also suggest Ga(framework)–Ga(extra‐framework) pairings, which can only be achieved in materials prepared by direct synthesis, are the most energetically favorable sites for reaction pathways leading to aromatics. Calculated acid site exchange energies between extra‐framework Ga at framework sites comprised of either Al or Ga reveal a site‐specific preference for stabilizing Lewis acids, which is qualitatively consistent with experimental measurements. These findings indicate the possibility of tailoring Lewis acid siting by the placement of Ga heteroatoms at distinct tetrahedral sites in the zeolite framework, which can have a marked impact on catalyst performance relative to conventional H‐ZSM‐5.

Zhou, Yunwen↗
DOE OSTI2021

Designer Nanomaterials through Programmable Assembly

Nanoparticles have long been recognized for their unique properties, leading to exciting potential applications across optics, electronics, magnetism, and catalysis. These specific functions often require a designed organization of particles, which includes the type of order as well as placement and relative orientation of particles of the same or different kinds. DNA nanotechnology offers the ability to introduce highly addressable bonds, tailor particle interactions, and control the geometry of bindings motifs. Here, we discuss how developments in structural DNA nanotechnology have enabled greater control over 1D, 2D, and 3D particle organizations through programmable assembly. This Review focuses on how the use of DNA binding between nanocomponents and DNA structural motifs has progressively allowed the rational formation of prescribed particle organizations. Here, we offer insight into how DNA-based motifs and elements can be further developed to control particle organizations and how particles and DNA can be integrated into nanoscale building blocks, so-called “material voxels”, to realize designer nanomaterials with desired functions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Development of an Enzyme-Inhibitor Reaction Using Cellular Retinoic Acid Binding Protein II for One-Pot Megamolecule Assembly

This paper presents an enzyme building block for the assembly of megamolecules. The system is based on the inhibition of the human-derived cellular retinoic acid binding protein II (CRABP2) domain. We synthesized a synthetic retinoid bearing an arylfluorosulfate group, which uses sulfur fluoride exchange click chemistry to covalently inhibit CRABP2. We conjugated both the inhibitor and a fluorescein tag to an oligo(ethylene glycol) backbone and measured a second-order rate constant for the protein inhibition reaction of approximately 3,600 M -1 s -1 . We used this new enzyme-inhibitor pair to assemble multi-protein structures in one-pot reactions using three orthogonal assembly chemistries to demonstrate exact control over the placement of protein domains within a single, homogeneous molecule. This work enables a new dimension of control over specificity, orientation, and stoichiometry of protein domains within atomically precise nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Co-design Framework for Online Data Analysis and Reduction

Science applications preparing for the exascale era are increasingly exploring in situ computations comprising of simulation-analysis-reduction pipelines coupled in-memory. Efficient composition and execution of such complex pipelines for a target platform is a codesign process that evaluates the impact and tradeoffs of various application- and system-specific parameters. In this article, we describe a toolset for automating performance studies of composed HPC applications that perform online data reduction and analysis. We describe Cheetah, a new framework for composing parametric studies on coupled applications, and Savanna, a runtime engine for orchestrating and executing campaigns of codesign experiments. Furthermore, this toolset facilitates understanding the impact of various factors such as process placement, synchronicity of algorithms, and storage versus compute requirements for online analysis of large data. Ultimately, we aim to create a catalog of performance results that can help scientists understand tradeoffs when designing next-generation simulations that make use of online processing techniques. We illustrate the design of Cheetah and Savanna, and present application examples that use this framework to conduct codesign studies on small clusters as well as leadership class supercomputers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Performance assessment of ensembles of in situ workflows under resource constraints

Summary Scientific breakthroughs in biomolecular methods and improvements in hardware technology have shifted from a long‐running simulation to a large set of shorter simulations running simultaneously, called an ensemble. In an ensemble, simulations are usually coupled with analyses of data produced by the simulations. In situ methods can be used to analyze large volumes of data generated by scientific simulations at runtime (i.e., simulations and analyses are performed concurrently). In this work, we study the execution of ensemble‐based simulations paired with in situ analyses using in‐memory staging methods. Using an ensemble of molecular dynamics in situ workflows with multiple simulations and analyses, we first show that collecting traditional metrics such as makespan, instructions per cycle, memory usage, or cache miss ratio is not sufficient to characterize complex behaviors of ensembles. We propose a method to evaluate the performance of ensembles of workflows that captures multiple resource usage aspects: resource efficiency, resource allocation, and resource provisioning. Experimental results demonstrate that the proposed method can effectively distinguish the performance of different component placements in an ensemble with up to 32 ensemble members. By evaluating different co‐location scenarios, our proposed performance indicators demonstrate benefits of co‐locating simulation and coupled analyses within a compute node.

Do, Tu Mai Anh↗
DOE OSTI2025

Joint Modeling of Wind Speed and Wind Direction Through a Conditional Approach

Atmospheric near surface wind speed and wind direction play an important role in many applications, ranging from air quality modeling, building design, wind turbine placement to climate change research. It is therefore crucial to accurately estimate the joint probability distribution of wind speed and direction. In this work, we develop a conditional approach to model these two variables, where the joint distribution is decomposed into the product of the marginal distribution of wind direction and the conditional distribution of wind speed given wind direction. To accommodate the circular nature of wind direction, a von Mises mixture model is used; the conditional wind speed distribution is modeled as a directional dependent Weibull distribution via a two-stage estimation procedure, consisting of a directional binned Weibull parameter estimation, followed by a harmonic regression to estimate the dependence of the Weibull parameters on wind direction. A Monte Carlo simulation study indicates that our method outperforms two other approaches in estimation efficiency: one that utilizes periodic spline quantile regression and another that generates data from the commonly used Abe-Ley distribution for cylindrical data. We illustrate our method by using the output from a regional climate model to investigate how the joint distribution of wind speed and direction may change under some future climate scenarios. Our method indicates significant changes in the variation of wind speed with respect to some directions.

17 WIND ENERGY↗
DOE OSTI2021

Hydro-mechanical measurements and x-ray imaging of sheared crystalline rock fractures from EGS Collab experiments 1 & 2

Measuring hydro-mechanical properties of natural fractures is a prerequisite for optimizing hydraulic stimulation design and well placement. We completed experiments to characterize shear on natural fractures in schist, amphibolite, and rhyolite specimens drilled from EGS Collab Project’s field sites at the Sanford Underground Research Facility (SURF) in South Dakota. A triaxial direct shear method and coupled x-ray imaging were used to perform hydroshearing and mechanical shearing at the site’s in-situ stress conditions. This produced simultaneous measurements of fracture and matrix strength, permeability, stress-dependent aperture, dilation, and friction strength. Our results identified that only a subset of the natural fractures was weak enough for hydroshearing. Generally, hydroshearing increases fracture permeability by a factor of 10 or more and the enhancement is retainable over time. However, the shear slip does not always result in permeability enhancement. High content of phyllosilicates was found to associate with exceptionally weak fractures that also exhibited poor or even negative enhancement after stimulation. Combining our measurements with site data, we can predict that most observable fractures at the two EGS Collab sites do not meet the criteria for hydroshearing before tensile opening. In some cases, the visible fractures are low permeability and as strong as the adjacent rock. To induce hydroshearing before tensile opening, injection must target known weak and favorably oriented fractures with confirmed pre-existing permeability.

58 GEOSCIENCES↗
DOE OSTI2022

Computer-aided Veress needle guidance using endoscopic optical coherence tomography and convolutional neural networks

During laparoscopic surgery, the Veress needle is commonly used in pneumoperitoneum establishment. Precise placement of the Veress needle is still a challenge for the surgeon. In this study, a computer-aided endoscopic optical coherence tomography (OCT) system was developed to effectively and safely guide Veress needle insertion. This endoscopic system was tested by imaging subcutaneous fat, muscle, abdominal space, and the small intestine from swine samples to simulate the surgical process, including the situation with small intestine injury. Each tissue layer was visualized in OCT images with unique features and subsequently used to develop a system for automatic localization of the Veress needle tip by identifying tissue layers (or spaces) and estimating the needle-to-tissue distance. We used convolutional neural networks (CNNs) in automatic tissue classification and distance estimation. In conclusion, the average testing accuracy in tissue classification was 98.53 ± 0.39%, and the average testing relative error in distance estimation reached 4.42 ± 0.56% (36.09 ± 4.92 μm).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Giant Dipole Moments: Remarkable Effects Mono‐, Di‐, and Tri‐ Hydrated 5,6‐Diaminobenzene‐1,2,3,4‐Tetracarbonnitrile

The molecule 5,6-diaminobenzene-1,2,3,4-tetracarbonnitrile (MOI) was first synthesized by Müllen and coworkers in 2016 and boasts an ultrastrong dipole moment of $14.1\pm 0.7$ Debye in THF. Gas phase DFT computations do not fully reflect this ultrastrong dipole moment, demonstrating the role of solvent in increasing this dipole moment. Here, we investigate the effect of solvent molecule position on the dipole moment of this species, computationally examining systems with giant dipole moments. These systems are optimized in the gas phase with the B3LYP functional, employing the aug-cc-pVTZ and def2-TZVP basis sets, as well as the B3LYP-D3BJ/aug-cc-pVTZ functional in Orca. Single point DLPNO-CCSD/aug-cc-pVDZ results were obtained from Orca and Psi4, as well as DLPNO-CCSD(T)/CBS information from Psi4. Additionally, these are compared to the dipole moments of di- and tri-hydrated systems, and the SMD models for THF and water at the B3LYP/aug-cc-pVTZ level of theory. The dissociation energies, HOMO-LUMO energy gaps, and dipole moments are presented. These metrics show the nh1nh1′ THF system boasts the largest dissociation energy and dipole moment of the singly solvated systems, due to its strong hydrogen bonding. The importance of solvent placement is highlighted and may guide the synthesis of macromolecules or organic frameworks incorporating the MOI or MOI-like subunits. Remarkably, a single solvent molecule provides a good model for the difference between the gas phase and solvated species. The predicted gas phase dipole moments computed with B3LYP/aug-cc-pVTZ for the MOI, its monohydrated complex, dihydrated complex, and its trihydrated complex are 9.6, 14.2, 16.0, and 16.8 Debye, respectively.

dipole↗
DOE OSTI2025

Phosphorus and cover crop management practices affect phosphorus speciation in soils and eroded sediments

Abstract Agricultural runoff often contains P in dissolved and sediment‐bound forms, decreasing surface water quality. No‐till and cover cropping conservation practices have been recommended for reducing erosion and nutrient loss from cropping systems. The overall aims of this study were to characterize and evaluate the effects of fertilizer (placement and source) and cover crop management on P speciation in surface runoff sediments and source soil. In 2014, a field‐scale experiment was established in a no‐till, corn (Zea maysL.)–soybean (Glycine maxL.) cropping system with two cover crop treatments (with and without a winter crop; winter wheat [Triticum aestivumL.], rapeseed [Brassica napusL.], hairy vetch [Vicia villosaRoth], winter triticale [×Triticosecale Wittm.], and cereal rye [Secale cerealeL.]) and three P fertilizer management treatments (no P, fall broadcast diammonium phosphate, and spring subsurface injected ammonium polyphosphate). Phosphorus fractionation in the source soil collected in the fall of 2019 and sediment samples collected throughout 2020 were analyzed using a modified sequential P extraction method to evaluate the cumulative effects of imposing the treatment factors over 5 years. The direct P speciation was done using X‐ray absorption near edge structure spectroscopy. The indirect P speciation (fractionation) results showed that the management practices affected the exchangeable, organic matter‐associated, and Fe‐bound P fractions in sediments and the exchangeable and residual fractions in source soil. Direct P speciation results showed a depletion of Fe‐associated P in soil and sediment from cover crop treatment, suggesting that Fe‐associated P species were affected by cover crops. Changes in soil and runoff sediment P speciation would change the proportions and forms of soluble and particulate P in runoff sediments and may influence P bioavailability in aquatic ecosystems. Developing P fertilizer and cropping system management options with an understanding of soil P transformations helps maintain environmental sustainability.

Environmental Sciences & Ecology↗
DOE OSTI2021

Sanitary Waste Landfill Effects on an Invasive Wild Pig Population

Being opportunistic omnivores, wild pigs (Sus scrofa) readily feed on edible garbage. Given the presence of substantial volumes of edible food waste, large multi-county and regional municipal sanitary waste landfills constitute attractive forage resources for pigs, providing a year-round anthropogenic source of potentially high-quality forage. Our objective was to assess the effects that a large regional landfill has on the local pigs foraging in that facility's waste disposal cells. The landfill, located on the United States Department of Energy's Savannah River Site (SRS) in South Carolina, USA, became operational in 1998 and pigs began foraging there in 2001. By 2009 >100 pigs/night were observed foraging in the landfill, suggesting landfill establishment may have important consequences for population dynamics, public safety, and disease transmission. We evaluated changes in body mass, fetal litter size, numbers of pigs removed, and wild pig-vehicle collisions (WPVCs) before (1980–2000) and after (2001–2019) pigs began foraging in the landfill on SRS. Body mass during the after period increased to a greater extent for pigs in the vicinity of the landfill compared to pigs on the rest of SRS. Fetal litter size increased for pigs in the vicinity of the landfill, whereas it remained unchanged on the rest of SRS. Our density surrogate (number of pigs harvested) increased around the landfill during the after period by 2.9 times, whereas on the rest of the site it only increased by 53%. No WPVCs occurred adjacent to the landfill before 2001, but WPVCs increased along the 2 major roads bordering the landfill after 2001. Effects of sanitary waste landfills on wild pig populations scavenging there can present unique challenges to population management, control, public safety, and disease transmission. Potential approaches to address these challenges could be exclusion fencing to prevent access to the landfill's waste disposal cells or enhanced placement of waste cell covers to reduce access.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Local element operations for curved simplex meshes

Summary Mesh optimization procedures are generally a combination of node smoothing and discrete operations which affect a small number of elements to improve the quality of the overall mesh. These procedures are useful as a post‐processing step in mesh generation procedures and in applications such as fluid simulations with severely deforming domains. In order to perform high‐order mesh optimization, these ingredients must also be extended to high‐order (curved) meshes. In this work, we present a method to perform local element operations on curved meshes. The mesh operations discussed in this work are edge/face swaps, edge collapses, and edge splitting (more generally refinement) for triangular and tetrahedral meshes. These local operations are performed by first identifying the patch of elements which contain the edge/face being acted on, performing the operation as a “straight‐sided one" by placing the high‐order nodes via an isoparametric mapping from the master element, and smoothing the high‐order nodes on the elements in the patch by minimizing a Jacobian‐based high‐order mesh distortion measure. Since the initial “straight‐sided guess” from the placement of the nodes via the isoparametric mapping frequently results in invalid elements, the distortion measure must be regularized which allows for mesh untangling for the optimization to succeed. We present several examples in 2D and 3D to demonstrate these local operations and how they can be combined with a high‐order node smoothing procedure to maintain mesh quality when faced with severe deformations.

Shi, A.↗
DOE OSTI2024

Additive manufacturing of sandwich panels with continuous fiber reinforced high modulus composite facings

Abstract An improved approach consisting of a combination of fiber placement and fused filament fabrication is introduced for the additive manufacture (AM) of structural grade sandwich beams. Here, sandwich beams are additively manufactured using in‐situ deposition and consolidation of continuous fiber unidirectional facings made from a commingled yarn system of e‐glass fiber (~50% vol.) and amorphous PET, and a hexagonal honeycomb core structure made from PETG. Both facings and the sandwich core are manufactured on a single machine, in one sequence (skin‐core‐skin), employing the benefit of matrix compatibility to create autohesion at the interfaces. Flexural and transverse shear rigidity are determined experimentally and compared with analytical predictions and show correlation to within 3%. Flexural strength and core shear strength are also measured. Post‐mortem examinations show that core fracture and core facing debond were the dominant failure mode in flexure. Single cantilever beam tests were performed to evaluate core facing debond toughness. Subsequently, surface preheat using infrared heaters was utilized to increase autohesion between core and facing. The results show debond toughness was increased 4 times using infrared heating. This research effort presents a manufacturing approach that has the potential for the AM of stiff, well bonded, structural grade sandwich beams, in an integrated sequence, employing in‐situ consolidation to the facings, without the need for the use of intermediate adhesives for skin‐to‐core bonding. Highlights An improved additive manufacturing technique for making sandwich panels is developed. Sandwich panel facings have fiber volume fractions of approximately 50%. Surface preheat improves core‐to‐facing debond toughness by a factor of 4. Top and bottom facings are consolidated during manufacture leading to better properties. Experimental results are compared to analytical predictions and show good correlation.

17 WIND ENERGY↗
DOE OSTI2020

Toward controlled functional sequencing and hierarchical structuring in imidazolium ionenes

This focused mini-review highlights recent advances related to the design and applications of imidazolium ionenes and forward-looking perspectives. Creative strategies which employ established synthetic approaches and utilize the modularity of the imidazole moiety unlock great potential for tailoring both functional and structural features arising from precise spacing of ionic groups within the polymer backbone. Here, as imidazolium ionenes draw more interest, increased sophistication of chemical modifications and material processing is occurring, with a corresponding shift toward more demanding applications. Synthetic routes for placement and sequencing of ionic content are discussed, in addition to recent approaches to control structure and self-assembly or tune behaviors of imidazolium ionenes and composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Large-Area Periodic Arrays of Atomically Flat Single-Crystal Gold Nanotriangles Formed Directly on Substrate Surfaces

The advancement of nanoenabled wafer-based devices requires the establishment of core competencies related to the deterministic positioning of nanometric building blocks over large areas. Within this realm, plasmonic single-crystal gold nanotriangles represent one of the most attractive nanoscale components but where the formation of addressable arrays at scale has heretofore proven impracticable. In this work, a benchtop process is presented for the formation of large-area periodic arrays of gold nanotriangles. The devised growth pathway sees the formation of an array of defect-laden seeds using lithographic and vapor-phase assembly processes followed by their placement in a growth solution promoting planar growth and threefold symmetric side-faceting. The nanotriangles formed in this high-yield synthesis distinguish themselves in that they are epitaxially aligned with the underlying substrate, grown to thicknesses that are not readily obtainable in colloidal syntheses, and present atomically flat pristine surfaces exhibiting gold atoms with a close-packed structure. As such, they express crisp and unambiguous plasmonic modes and form photoactive surfaces with highly tunable and readily modeled plasmon resonances. The devised methods, hence, advance the integration of single-crystal gold nanotriangles into device platforms and provide an overall fabrication strategy that is adaptable to other nanomaterials.

42 ENGINEERING↗
DOE OSTI2024

Automatic Digitization and Orientation of Scanned Mesh Data for Floor Plan and 3D Model Generation

This paper describes a novel approach for generating accurate floor plans and 3D models of building interiors using scanned mesh data. Unlike previous methods, which begin with a high resolution point cloud from a laser range-finder, our approach begins with triangle mesh data, as from a Microsoft HoloLens. It generates two types of floor plans, a “pen-and-ink” style that preserves details and a drafting-style that reduces clutter. It processes the 3D model for use in applications by aligning it with coordinate axes, annotating important objects, dividing it into stories, and removing the ceiling. Its performance is evaluated on commercial and residential buildings, with experiments to assess quality and dimensional accuracy. Our approach demonstrates promising potential for automatic digitization and orientation of scanned mesh data, enabling floor plan and 3D model generation in various applications such as navigation, interior design, furniture placement, facilities management, building construction, and HVAC design.

Sharma, Ritesh↗