Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microstructure Scale Lithium-Ion Battery Modeling: Part III. When and Where Lithium Plating Occurs and its Correlation with the Electrode Microstructure

Li-ion battery performance and degradation are closely related to the cell’s underlying electrode microstructure. Electrode microstructures are typically characterized with volume-averaged properties that neglect the impact of local heterogeneities. However, local heterogeneities create hot spots that can trigger degradation onset. Herein, a microstructure scale electrochemical model is used to investigate the impact of microstructure heterogeneity on lithium plating. The model predicts lithium plating is not uniform, even when considering a relatively small portion of the electrode (a cross-sectional area of 154×144 µm 2 ), preferring to plate on larger particles as compared to smaller particles. While local heterogeneities control where plating occurs, the model predicts that volume-averaged properties control when plating occurs. Additionally, the model predicts that the active material specific surface area has a linear relationship with the plating onset. However, the linear relationship between increased active material surface area and delayed plating response appears to be sensitive to the microstructure feature used to increase the active interface area. Here, a comparative case-study is explored where the specific surface area is increased by either reducing the active material particle diameter, adding open-porosity cracks, or increasing the active material surface roughness. The model predicts that increasing the specific surface area by reducing the active material particle diameter is the most effective strategy for delaying lithium plating. At 6C, reducing particle size is shown to be 3 and 20 times more effective than, respectively, adding open-porosity cracks and increasing surface roughness. A dual-layer electrode architecture combining gradations both for average properties and uniformities is eventually proposed to improve homogeneous material utilization and reduce degradation at high charge rates.

25 ENERGY STORAGE↗
DOE OSTI2024

Final Technical Report

This research project aims to understand the structure and properties of hidden intermediates in amorphous oxides grown by atomic layer deposition (ALD), and apply what is learned to achieve predictive phase and property control in the ALD synthesis of amorphous oxide thin films. The one-year renewal is to further this understanding to understand how amorphous TiO2 thin films by ALD turn into crystalline phase in correlation to the presence of medium range ordering (MRO) and other impurities. This fundamental study is expected to produce a predictive synthesis science for amorphous thin films with substantially improved uniformity and thereby achieve higher stability as a new surface coating strategy used for electrochemical catalysis. In this final technical report, we summarize the key achievements in this project to meet the research goals. This includes (1) a new approach to achieve homogeneous nanometer-scale amorphous coating leading to a new record of lifetime for photoelectrochemical hydrogen fuel generation; (2) A advancement in scanning transmission electron microcopy (STEM) that led to new understanding of intermediate phase in amorphous films; and (3) a computational model for understanding the local structure ordering in amorphous TiO2 films. In addition, this project also yielded relevant technical innovations including a development of bioresorbable zinc primary batteries that can self-degrade after depletion; and a ferroelectric membrane that provides active dendrites suppression to substantially improve the lifetime of rechargeable batteries. Collaboration with Lam Research also yield a new understanding of how built-in strain influences the amorphous films’ quality, bringing direct impacts to semiconductor manufacturing industry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Observational benchmarks inform representation of soil organic carbon dynamics in land surface models

Abstract. Representing soil organic carbon (SOC) dynamics in Earth system models (ESMs) is a key source of uncertainty in predicting carbon–climate feedbacks. Machine learning models can help identify dominant environmental controllers and establish their functional relationships with SOC stocks. The resulting knowledge can be integrated into ESMs to reduce uncertainty and improve predictions of SOC dynamics over space and time. In this study, we used a large number of SOC field observations (n=54 000), geospatial datasets of environmental factors (n=46), and two machine learning approaches (namely random forest, RF, and generalized additive modeling, GAM) to (1) identify dominant environmental controllers of global and biome-specific SOC stocks, (2) derive functional relationships between environmental controllers and SOC stocks, and (3) compare the identified environmental controllers and predictive relationships with those in models used in Phase 6 of the Coupled Model Intercomparison Project (CMIP6). Our results showed that the diurnal temperature, drought index, cation exchange capacity, and precipitation were important observed environmental predictors of global SOC stocks. While the RF model identified 14 environmental factors that describe climatic, vegetation, and edaphic conditions as important predictors of global SOC stocks (R2=0.61, RMSE = 0.46 kg m−2), current ESMs oversimplify the relationships between environmental factors and SOC, with precipitation, temperature, and net primary productivity explaining > 96 % of the variability in ESM-modeled SOC stocks. Further, our study revealed notable disparities among the functional relationships between environmental factors and SOC stocks simulated by ESMs compared with observed relationships. To improve SOC representations in ESMs, it is imperative to incorporate additional environmental controls, such as the cation exchange capacity, and refine the functional relationships to align more closely with observations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Benchmark microgravity experiments and computations for 3D dendritic-array stability in directional solidification

In this study, we present a comprehensive quantitative analysis of stability bands for dendritic arrays during directional solidification of a transparent succinonitrile-0.46 wt % camphor alloy, spanning a broad range of pulling velocities. Taking advantage of the microgravity environment aboard the International Space Station where most convection effects are suppressed, we obtain unique measurements that quantify the stable primary spacing range of spatially extended three-dimensional dendritic array structures under purely diffusive growth conditions. Through carefully designed velocity jump experiments and detailed examination of sub-grain boundary dynamics, we characterize key instabilities, including elimination and tertiary branching, shedding new light on the mechanisms governing dynamic dendritic spacing selection in extended 3D arrays. Phase field simulations are performed to characterize the stability limits of dendritic array structures for quantitative comparison with the flight experiments. Although the simulations capture general trends, significant deviations are noted at the upper stability boundary, indicating the influence of additional, unexplored factors. These findings contribute to a deeper understanding of dendritic growth dynamics and offer valuable benchmark data that could aid in refining predictive models and improving control of dendritic microstructures in metallurgical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Good practices for documenting AI-based studies on energy and buildings

Artificial intelligence has transformed building science research over the past decade, with applications spanning energy modeling, energy prediction, HVAC optimization and controls, fault detection, and occupancy modeling. However, many studies lack adequate documentation of datasets, algorithms, training procedures, and validation methods. Building science research faces additional challenges including inconsistent evaluation metrics, limited generalizability across building types, climates, and significant gaps between experimental studies and deployed systems. This communication provides practical guidance for good practices in documenting and publishing AI-based research following established standards from the computer science and machine learning communities. By adopting frameworks such as Datasheets for Datasets, Model Cards, and standardized reproducibility checklists, researchers can ensure their work meets the rigorous documentation standards necessary for reproducible, comparable, and impactful building science research.

Hong, Tianzhen [Lawrence Berkeley National Laborat↗
DOE OSTI2025

Application of pH-dependent environmental protection agency test method 1313 to low-activity nuclear waste glass

Here, in this study, we present results of a room temperature, pH-dependent leach test established by United States Environmental Protection Agency (EPA) Leaching Environmental Assessment Framework (LEAF) (EPA Method 1313 and further abbreviated EPA 1313) to study the alteration behavior of low-activity nuclear waste (LAW) glasses. Implementation of EPA 1313, which is closer to LAW disposal temperatures, could allow for more flexibility in the formulation of Hanford LAW glasses, specifically in terms of increased waste loading. A set of 48 LAW glasses were selected to test with EPA 1313. Briefly, the test method consists of adding glass to a number of solutions at different initial pH values and at a fixed mass-to-solution-volume ratio. The glass is then allowed to corrode for two days and the final solution pH and concentration of different glass elements in solution is measured. The test was modified from the published procedure to constrain particle size to provide more reproducible results, reduce the studied pH range to a more applicable range, and to reduce solution volume to reduce costs associated with material preparation. Compositional modeling was used to predict the measured elemental releases at various pH. The model predictions improved in tests where there was a relatively small difference between initial and final solution pH indicating that pH controls would result in better predictive models.

Accelerated aging↗
DOE OSTI2025

Czochralski Growth and Characterization of a Compositionally Complex Rare Earth Aluminum Garnet Scintillator: (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce

Compositionally complex oxides have garnered increasing interest for their enhanced phase stability and tunable functional properties, yet their development as bulk single crystal scintillators remains limited. Herein, we report the Czochralski growth and characterization of (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce (GYTLAG), a compositionally complex garnet incorporating four dodecahedrally coordinated principal rare earth elements. The garnet phase was confirmed by powder and single crystal X-ray diffraction, and macroscopic defects are described. X-ray absorption near-edge structure measurements confirm the 3+ oxidation state of all rare earths and support their occupation of the same crystallographic site; white line intensity variations correlate with the anticipated segregation behavior. Elemental segregation is quantified by SEM/EDS and ICP-OES, and a linear trend was established between the segregation coefficient and the difference between each rare earth’s ionic radius (r) and the average ionic radius (AIR) of the dodecahedral site. This trend offers a predictive framework for compositional control in future REAG crystals grown by the Czochralski method. Photoluminescence and radioluminescence measurements reveal both Ce 3+ and Tb 3+ emission. Scintillation pulses exhibit four-component decay with dominant ~230 µs and ~1.2 ms components, and the light yield is estimated to be up to 43,000 ph/MeV under 137Cs γ-ray excitation. GYTLAG also demonstrates a strong radioluminescence efficiency and 50% lower afterglow at 20 ms compared to a LuAG:Ce reference, underscoring its promise for scintillator applications.

Compositionally complex oxide, high entropy oxide,↗
DOE OSTI2025

Advanced Materials & Manufacturing Technology (AMMT): Development of Additive Manufacturing Agnostic Process Parameter Procedure, 316H Stainless Steel Readiness Level Data Sets, and Machine Maintenance Plan

The University of California, Davis is involved in a project to deploy and enhance an artificial intelligence (AI) system for predicting and preventing plasma disruptions on the DIII D tokamak, under the funding from Department of Energy DE-SC0023500 (title: AI/Deep Learning FRNN Software for Prediction & Real-Time Control of DIII-D Plasma Control System (PCS)). The overarching goal is to demonstrate that real-time, AI-guided intervention can proactively modify the plasma state to avoid or mitigate disruptions—a critical challenge for the future of fusion energy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Binary Quantum Control Optimization with Uncertain Hamiltonians

Optimizing the controls of quantum systems plays a crucial role in advancing quantum technologies. The time-varying noises in quantum systems and the widespread use of inhomogeneous quantum ensembles raise the need for high-quality quantum controls under uncertainties. In this paper, we consider a stochastic discrete optimization formulation of a discretized binary optimal quantum control problem involving Hamiltonians with predictable uncertainties. We propose a sample-based reformulation that optimizes both risk-neutral and risk-averse measurements of control policies, and solve these with two gradient-based algorithms using sum-up-rounding approaches. Furthermore, we discuss the differentiability of the objective function and prove upper bounds of the gaps between the optimal solutions to binary control problems and their continuous relaxations. We conduct numerical simulations on various sized problem instances based on two applications of quantum pulse optimization; we evaluate different strategies to mitigate the impact of uncertainties in quantum systems. In conclusion, we demonstrate that the controls of our stochastic optimization model achieve significantly higher quality and robustness compared with the controls of a deterministic model.

conditional value-at-risk (CVaR)↗
DOE OSTI2026

Deposition Height Prediction in Directed Energy Deposition

Using 316L stainless steel as a model material, reduced-order models are developed to predict capture efficiency, deposition height, and site-specific hardness in directed energy deposition. Capture efficiency is predicted over a 15 to 55 pct range using a dimensionless number derived from processing conditions and thermophysical properties. Deposition height is predicted over a 0.3 to 1.3 mm range without in situ sensing or prior training data, using two models based on the same mass and energy-balance principles. Predictions are compared with machine learning approaches. A quantitative relationship links deposition height, primary dendrite arm spacing (PDAS), and hardness: heights of 0.3 to 1.1 mm correspond to PDAS values of 2.7 to 5.1 µm and Vickers hardness (HV) of 160 to 219. Thinner layers cool more rapidly, producing finer microstructures and higher hardness. Samples fabricated with in situ variations in deposition height exhibited up to 55 HV differences between thick and thin regions, demonstrating that local control of deposition height enables predictive, site-specific hardness within a single build. These results establish deposition height prediction as a pathway for a priori process design and property control in directed energy deposition for 316L stainless steel.

Kunkel, William [Univ. of Wisconsin, Madison, WI (↗
DOE OSTI2025

Operation of helium sub-atmospheric multistage cryogenic centrifugal compressor trains: Part 1 – Steady state modeling and speed ratio selection

Helium cryogenic systems which can provide cooling below the normal boiling point of helium (approximately 4.2 K) are often required by superconducting radio-frequency niobium resonators utilized in modern high-energy particle accelerators. Achieving temperatures below 4.2 K generally involves operating a cryogenic vessel with liquid helium under sub-atmospheric conditions, thereby lowering the saturation pressure and corresponding saturation temperature. Over the last several decades, multi-stage cryogenic centrifugal compressor trains (CC’s) have been operated efficiently and reliably within large-scale cryogenic systems to continuously evacuate helium vapor generated by a device within the vessel, maintaining sub-atmospheric conditions in the vessel while pressurizing the return vapor to above atmospheric conditions. Traditionally, these CC systems have been operated using empirically derived control philosophies and insight gathered from previous operational experience. Recent efforts at the Facility for Rare Isotope Beams (FRIB) have been aimed at the development of a theoretical basis to characterize the operation of multi-stage cryogenic centrifugal compressor train and utilizing predictive model results to generate control parameters. The objective of this research was identifying operational points which adequately balance cryogenic system efficiency, stability, and overall ease of operation. Furthermore, this manuscript provides an overview of the predictive model development, characterization of the FRIB cryogenic centrifugal compressors and implementation of the predicted performance results during steady-state system operation.

Compressor train control↗
DOE OSTI2025

Investigating the universality of five-point QCD scattering amplitudes at high energy

We investigate 2 → 3 QCD scattering amplitudes in multi-Regge kinematics, i.e. where the final partons are strongly ordered in rapidity. In this regime amplitudes exhibit intriguing factorisation properties which can be understood in terms of effective degrees of freedom called reggeons. Working within the Balitsky/JIMWLK framework, we predict these amplitudes for the first time to next-to-next-to-leading logarithmic order, and compare against the limit of QCD scattering amplitudes in full colour and kinematics. We find that the latter can be described in terms of universal objects, and that the apparent non-universality arising at NNLL comes from well-defined and under-control contributions that we can predict. Thanks to this observation, we extract for the first time the universal vertex that controls the emission of the central-rapidity gluon, both in QCD and $\mathcal{N}$ = 4 super Yang-Mills.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

MHD, disruptions and control physics: Chapter 4 of the special issue: on the path to tokamak burning plasma operation

In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Responsible Adoption of Artificial Intelligence (AI) in Electric Grid Operations

The future of the grid will be powered by AI—or undermined by it. Artificial intelligence is rapidly reshaping grid operations, improving fault detection, forecasting accuracy, and real-time optimization. As AI systems move closer to operational decision loops, however, they introduce new consequence pathways: expanded attack surfaces, model integrity risks, regulatory exposure, and human-automation challenges. This talk presents a consequence-driven framework for deploying AI responsibly in the electric grid. Attendees will gain practical strategies to strengthen resilience, boost reliability, and deploy AI securely — ensuring the grid of the future is not only smarter but safer.

25 - ENERGY STORAGE↗
DOE OSTI2025

Phosphoproteomics Modifications in Women with Rheumatoid Arthritis─Application of Web-Based Software to Enhance Data Visualization

Individuals with rheumatoid arthritis (RA) are at increased risk of functional disability, cardiovascular disease, and obesity, all of which are influenced by dysregulated skeletal muscle. Here, this pilot study aims to identify phosphoproteomics changes in RA skeletal muscle and visualize modifications through development of a web-based app designed to promote user-friendly data interpretation and visualization. NanoLC–MS/MS analysis was performed on vastus lateralis biopsies from three women with RA and matched healthy controls. Differential analysis was performed using the Limma R package. Kinase substrate enrichment analysis (KSEA) predicted changes in kinase activity. RA muscle displayed 35 upregulated and 60 downregulated phosphosites, including the cytoskeletal proteins TTN (Ser33201, Ser33013, Ser20925), NEB (Ser2219, Thr254, Ser33013, Ser20925), FLNA (Ser1459), and LASP1 (Ser146). Compared to healthy controls, KSEA predicted decreased activity of several kinases in RA muscle, including PRKACA and CDKs. All such changes were visualized by use of our web-based app. Overall, phosphoproteome analysis reveals signaling alterations in RA skeletal muscle linked to cytoskeletal proteins, representing candidate disease biomarkers; these modifications can be explored through use of our web-based software.

phosphoproteomics↗
DOE OSTI2026

A ModEx Framework for Watershed Subsurface Investigation With Limited Geophysical Data Using Machine Learning and Hydrologic Modeling

Abstract Subsurface heterogeneity influences watershed hydrology strongly but remains difficult to characterize at catchment scales with sparse and costly field data. Geophysical surveys such as electromagnetic induction (EMI) provide local spatial subsurface images yet scaling them to watershed scales and converting EMI‐derived resistivity into hydraulic properties remains a challenge. We present a Model–Experiment (ModEx) framework that integrates limited EMI data with machine learning (ML) and hydrologic modeling to improve process representation and guide field investigations. Sparse EMI surveys were scaled to the catchment scale using a Random Forest model, and the resulting resistivity fields were combined with nearby borehole constraints to parameterize a hydrologic model. The EMI‐informed hydrological simulations improved predictions of streamflow sustained by subsurface flow and shallow saturation patterns. By combining EMI data and ML with hydrologic modeling, the ModEx framework guides future subsurface surveys, providing a transferable and efficient strategy for data–model integration across diverse watersheds. Plain Language Summary Mapping the underground network of soil and rock that controls water is essential for predicting floods and droughts, but seeing underground is difficult and expensive. We cannot drill everywhere, so scientists use geophysical tools to scan broad areas. There are two key challenges: these geophysical scans are often sparse across the whole watershed, and the geophysical data is hard to translate into water‐related properties. We used artificial intelligence to solve these problems. We taught a computer to find patterns linking the limited geophysical data to the land surface properties. This allowed it to fill in the gaps and create a complete, useful subsurface map for the entire watershed. This new map improves hydrologic simulations, leading to more accurate predictions of water movement in the watershed. It also helps scientists build better models with less data and generates a priority map showing where to measure next, making future investigations more efficient. Key Points Limited EMI scaled with ML improves catchment‐scale subsurface parameterization for hydrologic models The framework integrates hydrologic modeling with limited geophysical data to support subsurface investigation design ModEx framework offers a transferable data–model integration strategy that quantifies and reduces uncertainty guiding watershed studies

Chen, Hang↗
DOE OSTI2024

Hot Springs and Geysers: Exploring Historical and Modern Impacts of Geothermal Energy Production on Associated Natural Surface Systems and Standardizing Management Practices

Surface thermal features, most notably hot springs and geysers are increasingly being recognized for their importance to ecosystems, indigenous cultures, and in some cases agriculture, recreation, and tourism. Geothermal project development poses a potential risk to these natural features but current regulatory requirements for assessing and managing these risks during exploration, permitting and monitoring are somewhat inconsistent and unpredictable across different geothermal fields. This has resulted in uncertainty and increases in exploration risk for geothermal energy developers that have led to costly project delays, cancellations, or hesitation to commit. Varying regulatory requirements may also influence public perception, fostering confusion, distrust and ultimately opposition to geothermal projects, further contributing to project delays or cancellations. At a time when there is an increasing urgency for reliable baseload clean energy, geothermal is a net-zero, renewable solution that additionally provides access to more equitable and environmentally just clean power. Continued integration of geothermal energy into the national energy roadmap can be facilitated through consistent and predictable permitting, providing regulators the framework they need, developers a clear path forward, and transparency that the public deserves. This project, currently in its beginning phases, seeks to address this important issue by providing a technical basis from which to build a preliminary protocol for assessing and managing potential impacts from new or existing geothermal energy projects to surface thermal features and their associated ecosystems. Development of this preliminary protocol will be informed by (1) a literature review of well-documented case studies in the western U.S. and New Zealand to understand the range of conditions that exemplify geothermal-surface thermal systems; (2) development of generic illustrative conceptual-numerical models to quantify, understand, and predict the first-order controls (e.g., pressure and permeability) on surface flows; and (3) additional independent and scientifically rigorous evaluations of geothermal-surface thermal system case studies from the Basin and Range Province that incorporate publicly available data as well as data provided by industry through data-sharing agreements. Learning from the successes of the process used to develop the Induced Seismicity Management Protocol (ISMP), we ultimately aim to use these initial efforts as a springboard for establishing a surface thermal feature management working group that will work collaboratively to finalize the protocol as well as co-create recommended best practices for implementation. We envision that the working group will primarily be composed of representatives from regulatory entities, government agencies, Tribes, academia, national laboratories, and industry, and will include early and regular engagement with community organizations and environmental groups. This will help ensure broad acceptance and implementation of the protocol, which will facilitate a more consistent, predictable, and standardized regulatory process, and help to ensure that geothermal energy continues to provide a reliable source of clean energy, and a pathway to achieving greater energy equity in the U.S.

Best Practices↗