Search NASA⌕ Search

SEARCH · Search NASA

Results for “program synthesis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Key scientific findings and policy- and health-relevant insights from the US. Environmental Protection Agency's Particulate Matter Supersites Program and related studies: an integration and synthesis of results

Over 400 peer-reviewed journal articles and likely more than 1000 presentations resulted from the research conducted through EPA's PM Supersites Program. From the start, the program was developed with a policy focus - providing new information on the accumulation and sources of PM in air on urban and regional scales that might allow for the development of more effective approaches to reducing ambient concentrations of PM to below NAAQS levels. This paper synthesizes and integrates the atmospheric sciences findings from which are interpreted a series of policy-relevant and health-relevant insights developed to support policy decisions on approaches to reduce PM in air and to assist the health-effects and exposure science communities with future research planning. 548 refs., 10 figs., 13 tabs.

01 COAL, LIGNITE, AND PEAT↗

Analytical Fuselage and Wing Weight Estimation of Transport Aircraft

A method of estimating the load-bearing fuselage weight and wing weight of transport aircraft based on fundamental structural principles has been developed. This method of weight estimation represents a compromise between the rapid assessment of component weight using empirical methods based on actual weights of existing aircraft, and detailed, but time-consuming, analysis using the finite element method. The method was applied to eight existing subsonic transports for validation and correlation. Integration of the resulting computer program, PDCYL, has been made into the weights-calculating module of the AirCraft SYNThesis (ACSYNT) computer program. ACSYNT has traditionally used only empirical weight estimation methods; PDCYL adds to ACSYNT a rapid, accurate means of assessing the fuselage and wing weights of unconventional aircraft. PDCYL also allows flexibility in the choice of structural concept, as well as a direct means of determining the impact of advanced materials on structural weight. Using statistical analysis techniques, relations between the load-bearing fuselage and wing weights calculated by PDCYL and corresponding actual weights were determined.

Chambers, Mark C.↗

Development of Advanced Methods of Structural and Trajectory Analysis for Transport Aircraft

In this report the author describes: (1) development of advanced methods of structural weight estimation, and (2) development of advanced methods of flight path optimization. A method of estimating the load-bearing fuselage weight and wing weight of transport aircraft based on fundamental structural principles has been developed. This method of weight estimation represents a compromise between the rapid assessment of component weight using empirical methods based on actual weights of existing aircraft and detailed, but time-consuming, analysis using the finite element method. The method was applied to eight existing subsonic transports for validation and correlation. Integration of the resulting computer program, PDCYL, has been made into the weights-calculating module of the AirCraft SYNThesis (ACSYNT) computer program. ACSYNT bas traditionally used only empirical weight estimation methods; PDCYL adds to ACSYNT a rapid, accurate means of assessing the fuselage and wing weights of unconventional aircraft. PDCYL also allows flexibility in the choice of structural concept, as well as a direct means of determining the impact of advanced materials on structural weight.

Ardema, Mark D.↗

Rediscovering Apollo Biomedical Data to Support Artemis: The Apollo Records Synthesis Project

With the first crewed missions of the Artemis Program on the horizon, including the return of humans to another planetary surface, the space medicine and research communities have a renewed interest in buying down risk on these missions using historic Apollo datasets. Archivists with NASA’s Life Sciences Data Archive (LSDA) and epidemiologists with the Lifetime Surveillance of Astronaut Health (LSAH) are collaborating on a project aiming at improving access to historic datasets from the Apollo Program. The Apollo Records Synthesis Project (ARSP) seeks to expand the available historic biomedical knowledge base by examining physical records located across a wide range of collections, including examples such as pre-flight and post-flight physicals, lab reports, and handwritten flight surgeon and biomedical engineer logs from Apollo missions. The ARSP team has been able to identify several previously undocumented sources of biomedical information from Apollo missions. In the future, the team will modernize record storage and accessibility of these resources using digitization and natural language processing. This poster will discuss the progress of the project, give context to the dual research-clinical care nature of the records, and highlight the challenges and opportunities in using data from historical records. This poster will also provide information on how researchers can request access to datasets from these records.

life sciences↗

Rediscovering Apollo Biomedical Data to Support Artemis: The Apollo Records Synthesis Project

With the first crewed missions of the Artemis Program on the horizon, including the return of humans to another planetary surface, the space medicine and research communities have a renewed interest in buying down risk on these missions using historic Apollo datasets. Archivists with NASA’s Life Sciences Data Archive (LSDA) and epidemiologists with the Lifetime Surveillance of Astronaut Health (LSAH) are collaborating on a project aiming at improving access to historic datasets from the Apollo Program. The Apollo Records Synthesis Project (ARSP) seeks to expand the available historic biomedical knowledge base by examining physical records located across a wide range of collections, including examples such as pre-flight and post-flight physicals, lab reports, and handwritten flight surgeon and biomedical engineer logs from Apollo missions. The ARSP team has been able to identify several previously undocumented sources of biomedical information from Apollo missions. In the future, the team will modernize record storage and accessibility of these resources using digitization and natural language processing. This poster will discuss the progress of the project, give context to the dual research-clinical care nature of the records, and highlight the challenges and opportunities in using data from historical records. This poster will also provide information on how researchers can request access to datasets from these records.

life sciences↗

On the theory of the synthesis of offset dual-shaped reflectors - Case examples

In an earlier paper by Galindo-Israel et al. (1987), the geometrical optics (GO) principles, constraints, and requirements of the dual- and single-offset-shaped reflector synthesis problem were collected and developed into a set of nonlinear first-order PDEs. An extension of the methods by which solutions to the PDEs can be obtained is presented, together with several case examples. These examples are independently analyzed by GO and physical optics diffraction methods. The starting point for the integration over each reflector can be taken on the outer rim, at the center, or at an intermediate point-the intermediate starting point being the more general case. The utility of the speed of this synthesis method is demonstrated. For example, the program utilized completes a synthesis in less than 45 s on a 386/20 personal computer and within a fraction of a second on a mainframe Cray. This makes practical the incorporation of the synthesis into a search algorithm that can optimize one or more parameters of the reflector system. As an example, the optimization of the mapping equations for low cross polarization is discussed.

Galindo-Israel, Victor↗

In situ X-ray diffraction study of reduction processes of Fe{sub 3}O{sub 4}- and Fe{sub 1-x}O-based ammonia-synthesis catalysts

The temperature-programmed reduction process of two types of industrial ammonia-synthesis catalysts, A110 and ZA-5, which are, respectively, based on Fe{sub 3}O{sub 4} and Fe{sub 1-x}O precursors, were studied by in situ X-ray power diffraction (XRD). It has been found that the ZA-5 has lower reduction temperature and faster reduction rate, and its active phase alpha-Fe possesses a higher value of lattice microstrain than A110. The simulation based on Rietveld refinement has also shown that the shape of alpha-Fe grain of ZA-5 has a mixed shape of cube and sphere with more exposing (111) and (211) planes, while that of A110 looks like a concave cube with more exposing (110) planes. Based on the results obtained, a growth model of alpha-Fe during the reduction of Fe{sub 3}O{sub 4}- and Fe{sub 1-x}O-based ammonia-synthesis catalysts is proposed, and the origins for the activity difference has been also discussed. - Graphical Abstract: A proposed growth model of active phase alpha-Fe during reduction. Due to H{sub 2} diffusing easily into the pores, reduction starts on outside and inside surface simultaneously to form 'microcrystalline film', and the particles shrink during reduction which results in breaking of the aggregated oxide particle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A superstructure optimization approach for process synthesis under complex reaction networks

Here in this work, we present mixed integer linear programming methods for the synthesis of processes that involve complex reaction networks. Specifically, we consider the modeling of reactors and interconnecting streams in systems where the composition of the reactor inlet streams can vary substantially, thereby making the determination of the limiting component as well as the calculation of the stream heating/cooling and power requirements challenging. First, towards the modeling of reactors, we develop an extent-based method which detects the limiting reactant of each reaction occurring in parallel with others, based on the inlet flows of the reactants. Second, we develop a computationally tractable method for the calculation of the work and heating/cooling duty needed to condition any stream of a process based on simple calculations that can be performed offline. Finally, we present how the two aforementioned components can be integrated in an optimization model generated based on a process superstructure. We demonstrate the application of the developed methods for the synthesis of a biorefinery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering calculations for solving the orbital allotment problem

Four approaches for calculating downlink interferences for shaped-beam antennas are described. An investigation of alternative mixed-integer programming models for satellite synthesis is summarized. Plans for coordinating the various programs developed under this grant are outlined. Two procedures for ordering satellites to initialize the k-permutation algorithm are proposed. Results are presented for the k-permutation algorithms. Feasible solutions are found for 5 of the 6 problems considered. Finally, it is demonstrated that the k-permutation algorithm can be used to solve arc allotment problems.

Reilly, C.↗

Expert system for multidisciplinary analysis and optimization using ASTROS

This paper discusses the framework of a Knowledge Based Expert System (KBES) environment to design aerospace structures under structural and aerodynamic constraints using ASTROS (Automated Structural Optimization program). ASTROS is a synthesis tool built around the NASTRAN finite element program. The knowledge base capabilities are discussed for synthesizing in statics, normal mode, steady and unsteady aerodynamic disciplines. A description of the two ASTROS advisor modules the Editor/Bulk Data generator and Post-processor is included. Experiences and issues involved in hierarchical representation of knowledge as menu options at different levels of abstraction are presented. A brief overview of Knowledge Based Systems and the shell CLIPS (C Language Integrated Production System) used to develop the ASTROS Advisor are discussed. Illustrative examples of the advisor in designing airframe structures are also included.

Sarma, Hari K.↗

QA4, a language for artificial intelligence.

Introduction of a language for problem solving and specifically robot planning, program verification, and synthesis and theorem proving. This language, called question-answerer 4 (QA4), embodies many features that have been found useful for constructing problem solvers but have to be programmed explicitly by the user of a conventional language. The most important features of QA4 are described, and examples are provided for most of the material introduced. Language features include backtracking, parallel processing, pattern matching, set manipulation, and pattern-triggered function activation. The language is most convenient for use in an interactive way and has extensive trace and edit facilities.

Derksen, J. A. C.↗

A Software Architecture for Intelligent Synthesis Environments

The NASA's Intelligent Synthesis Environment (ISE) program is a grand attempt to develop a system to transform the way complex artifacts are engineered. This paper discusses a "middleware" architecture for enabling the development of ISE. Desirable elements of such an Intelligent Synthesis Architecture (ISA) include remote invocation; plug-and-play applications; scripting of applications; management of design artifacts, tools, and artifact and tool attributes; common system services; system management; and systematic enforcement of policies. This paper argues that the ISA extend conventional distributed object technology (DOT) such as CORBA and Product Data Managers with flexible repositories of product and tool annotations and "plug-and-play" mechanisms for inserting "ility" or orthogonal concerns into the system. I describe the Object Infrastructure Framework, an Aspect Oriented Programming (AOP) environment for developing distributed systems that provides utility insertion and enables consistent annotation maintenance. This technology can be used to enforce policies such as maintaining the annotations of artifacts, particularly the provenance and access control rules of artifacts-, performing automatic datatype transformations between representations; supplying alternative servers of the same service; reporting on the status of jobs and the system; conveying privileges throughout an application; supporting long-lived transactions; maintaining version consistency; and providing software redundancy and mobility.

Filman, Robert E.↗

A general-purpose optimization program for engineering design

A new general-purpose optimization program for engineering design is described. ADS (Automated Design Synthesis) is a FORTRAN program for nonlinear constrained (or unconstrained) function minimization. The optimization process is segmented into three levels: Strategy, Optimizer, and One-dimensional search. At each level, several options are available so that a total of nearly 100 possible combinations can be created. An example of available combinations is the Augmented Lagrange Multiplier method, using the BFGS variable metric unconstrained minimization together with polynomial interpolation for the one-dimensional search.

Vanderplaats, G. N.↗

FORTÉ Machine Learning

Of the non-corrupted data collected by the Orbiting Experiment (forté) satellite’s Photo-Diode Detector during the year 2001, I estimate that 7.9% of 914 894 signals are noise. My result differs dramatically from Guillen’s estimate of 96%. To arrive at this estimate, I used Gaussian mixture model (GMM) clustering–unsupervised machine learning–to aggregate the wave forms into groups based on the absolute value of the lowest 25 positive frequency discrete Fourier transform coefficients. Then, I marked several of the groups as noise by inspecting a random sampling of wave forms from each group. Marking groups as either noise or non-noise is a supervised binary classification operation. After removing the signals in noise groups from further consideration, I clustered the remaining signals into families. Again, I used a GMM, but for the familial clustering I used a Non-Negative Matrix Factorization feature vector transform. The result was 9 distinct families of lightning signals, as well as a second stage of noise filtering. To efficiently represent the entirety of the signal space, I broke each family into deciles based on their distance from the family mean. In this case, distance means the log-likelihood based on the GMM. Signals in lower deciles are more similar in shape and amplitude to their family average. I took the top 200 samples from each decile of each group, resulting in 18 000 signals. These signal approximately represent the entirety of the forté observations. To represent outliers, I also kept a zoo of the 1000 signals furthest from any family’s average. All told, the resulting data set represents the forté data with a reduction of about 51:1. To allow synthesis of an arbitrarily large number of test signals, I also captured each family’s average signal and the time-sample covariance matrix over the signals in each family. Using these two pieces of information, I can synthesize new waveforms by using a Gaussian random realization from the family average and covariance matrix. I wrote a program to test the synthesis quality. The program shows me two signals on the screen, one synthesized and one randomly drawn from the data. I attempted to identify the synthesized signal. Although the synthesis is imperfect, in an A/B comparison I only correctly chose the synthesized signal 36% of the time.

97 MATHEMATICS AND COMPUTING↗