Search NASA⌕ Search

SEARCH · Search NASA

Results for “relative phase angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Nondestructive Photo-Cross-Linking of Microphase-Separated Diblock Polymers through Coumarin Dimerization

The effect of long-wavelength ultraviolet photocrosslinking on microphase-separated coumarin-containing block polymers was studied by photo-rheometry and small-angle X-ray scattering. This model system consisted of three photocrosslinkable diblock polymers of poly(methoxyethyl acrylate)-b-poly(hexyl methacrylate-co-coumarin methacrylate) with different volume fractions of the crosslinkable coumarin-containing block, which microphase separated into lamellar and cylindrical morphologies. All polymers stiffened upon exposure to 365 nm light, with much greater relative increases in moduli recorded for lamellae-forming polymers (ca. 3200% increase) compared to the cylinder-forming polymer (ca. 550% increase). Disordering transitions that were evident in uncrosslinked samples were no longer observed after crosslinking in the ordered state, and domain sizes were found to remain stable to heating. The photocrosslinking reaction only proceeded under active irradiation, indicating a high degree of spatiotemporal control over curing in this system. Finally, at constant concentration of couamarin within the crosslinkable block, the cure rate was largely independent of polymer composition, suggesting a constant local concentration of coumarin moieties within the segregated crosslinkable domains. Lastly, these findings establish a set of specific structure-property relationships governing the phase-selective photocrosslinking of diblock polymers that can guide the design of robust nanostructured materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Unconventional Hysteretic Transition in a Charge Density Wave

Hysteresis underlies a large number of phase transitions in solids, giving rise to exotic metastable states that are otherwise inaccessible. Here, we report an unconventional hysteretic transition in a quasi-2D material, EuTe 4 . By combining transport, photoemission, diffraction, and x-ray absorption measurements, we observe that the hysteresis loop has a temperature width of more than 400 K, setting a record among crystalline solids. The transition has an origin distinct from known mechanisms, lying entirely within the incommensurate charge density wave (CDW) phase of EuTe 4 with no change in the CDW modulation periodicity. We interpret the hysteresis as an unusual switching of the relative CDW phases in different layers, a phenomenon unique to quasi-2D compounds that is not present in either purely 2D or strongly coupled 3D systems. Furthermore, our findings challenge the established theories on metastable states in density wave systems, pushing the boundary of understanding hysteretic transitions in a broken-symmetry state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

All-Digital Plug and Play Passive RFID Sensors for Energy Efficient Building Control

This is the final report for the project “All-Digital Plug and Play Passive RFID Sensors for Energy Efficient Building Control”, funded by DOE, and performed by Clemson University, Phase IV Engineering and Harvard University from October 1, 2016 to December 31, 2020. The main objective of this project is to develop, demonstrate and pre-commercialize a novel, plug & play, battery-free, wireless sensor technology to enable low-cost (<$10 per node) indoor and outdoor temperature and humidity measurement for energy efficient building controls and operations. The proposed technology is based on the novel concept of all-digital sensing and its seamless integration with the passive RFID technology. This project focuses on the design, fabrication, material optimization, interrogation electronics, validation, and demonstration of the novel sensor nodes for building applications. The specific objectives of this research program include: (1) Design, fabricate and optimize a compact, robust, and high-resolution digitizer, which could convert rotation angle into digital numbers. (2) Develop the multi-physics-based modeling and simulation of the temperature/humidity transducer to derive a rational design of the architecture, dimension, structure, materials (i.e., mechanical, electrical, thermal and hygroscopic) properties and functions of the sensor node. (3) Design, fabricate and optimize the bi-material based humidity sensitive coil which could linearly transduce the environmental relative humidity variations to rotation angles. (4) Design, fabricate and optimize an UHF RFID platform which could support long-range passive wireless communications of 8-bit digital numbers. (5) Design, fabricate and optimize the miniaturized all-digital sensor using MEMS technology. (6) Validate the integrated all-digital sensing system in a real building environment to test the system’s performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

K-means-driven Gaussian Process data collection for angle-resolved photoemission spectroscopy

Abstract We propose the combination of k-means clustering with Gaussian Process (GP) regression in the analysis and exploration of 4D angle-resolved photoemission spectroscopy (ARPES) data. Using cluster labels as the driving metric on which the GP is trained, this method allows us to reconstruct the experimental phase diagram from as low as 12% of the original dataset size. In addition to the phase diagram, the GP is able to reconstruct spectra in energy-momentum space from this minimal set of data points. These findings suggest that this methodology can be used to improve the efficiency of ARPES data collection strategies for unknown samples. The practical feasibility of implementing this technology at a synchrotron beamline and the overall efficiency implications of this method are discussed with a view on enabling the collection of more samples or rapid identification of regions of interest.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Low-energy electron driven reactions in 2-bromo-5-nitrothiazole

Thiazole derivatives are biologically relevant molecules, used also in pharmaceutical applications. Herein, we report results for electron attachment to 2-bromo-5-nitrothiazole (BNT) in the gas phase. Employing two crossed electron–molecule beam experiments, we determined the efficiency curves of various fragment anions as a function of the initial electron energy between about 0 and 10 eV as well as the emission angle and kinetic energy distributions of Br− and NO2− ions formed from a resonance near 4 eV. The experiments were supported by quantum chemical calculations, exploring possible dissociation pathways along with their reaction energies. We also compared the electron attachment characteristics of BNT with those of the native thiazole molecule by performing electron attachment experiments and calculations for this molecule as well. Compared to thiazole, which is primarily degraded only by electrons with kinetic energies between about 5 and 10 eV, BNT is susceptible to low-energy electrons near 0 eV with enhanced cross section for (dissociative) electron attachment. However, although BNT offers two localization sites with high electron affinity (Br and NO2 moieties), we do not find the corresponding anions as the dominant negatively charged species formed upon electron attachment. Instead, the reaction channels with an abstraction of Br and NO2 as neutral radicals prevail, accompanied by the opening of the thiazole ring due to the relatively weak C–S bond.

Chen, Jiakuan (ORCID:0009000729608641)↗
DOE OSTI2020

Experimental investigation of turbulent wake flows in a helically wrapped rod bundle in presence of localized blockages

In nuclear sodium fast reactors, bundles of rods are tightly packed into a triangular lattice, enclosed in a hexagonal duct, and each pin is spirally wrapped with a thin wire. Flow blockages can potentially impact the local flow characteristics and heat transfer mechanisms in the bundle due to its small subchannel size. The effects of the blockage on the flow structures and heat transfer mechanisms are important aspects that require an accurate investigation. In this study, the flow-field characteristics in the vicinity of a blockage located in the exterior subchannel of rod bundles with helically wrapped wires were experimentally investigated. The velocity fields in the exterior subchannel were acquired by applying matched-index-of-refraction and time-resolved particle image velocimetry (TR-PIV) techniques for Reynolds numbers of Re 1 = 4000 and Re 2 = 17 000, i.e., equivalent to Rew 1 = 19 600 and Rew 2 = 83 200, respectively, based on the blockage width. The results from the TR-PIV measurements revealed an arch-shaped vortex with a large flow recirculation and a pair of counter-rotating vortices in the wake region downstream of the blockage, which is commonly observed in the wake flow of bluff bodies. The relative lateral distance and angle between the two vortices decreased when the Reynolds numbers increased. Profiles of maximum turbulence intensity along the shear layers illustrated the transition process including the growth, peak, and decay along the flow direction. From the spectral analysis of the turbulent velocities extracted at points along the shear layer, the Strouhal numbers ( St ) representing the vortex shedding frequency were found to be St = 0.25 and St = 0.56 for the left and right shear layers, respectively. Characteristics of shear layers generated by the blockage in the exterior subchannel were investigated via the two-point cross correlation of fluctuating velocities. The patiotemporal cross correlations of turbulent velocities, computed at points in the region where the left shear layer exhibited rolling effects and vortex breakdowns, were considerably wider and longer. The convection velocity U c was estimated to be ~0.82 U m to 0.93 U m . Proper orthogonal decomposition (POD) analysis was applied to the instantaneous velocity fields to extract the statistically dominant flow structures. It was found that POD modes 2–3 and 4–5 formed the pair modes when the corresponding POD temporal coefficients depicted sinusoidal shapes and exhibited nearly circular orbits in the phase space. Spectral analysis of the POD temporal coefficients confirmed the vortex shedding frequencies detected in the analysis of turbulent velocities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Installation of the Dark Energy Spectroscopic Instrument at the Mayall 4-meter telescope

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 square degrees will be measured during the life of the experiment. We describe the installation of the major elements of the instrument at the Mayall 4m telescope, completed in late 2019. The previous prime focus corrector, spider vanes, and upper rings were removed from the Mayall’s Serrurier truss and replaced with the newlyconstructed DESI ring, vanes, cage, hexapod, and optical corrector. The new corrector was optically aligned with the primary mirror using a laser tracker system. The DESI focal plane system was integrated to the corrector, with each of its ten 500-fiber-positioner petal segments installed using custom installation hardware and the laser tracker. Ten DESI spectrographs with 30 cryostats were installed in a newly assembled clean room in the Large Coude Room. The ten cables carrying 5000 optical fibers from the positioners in the focal plane were routed down the telescope through cable wraps at the declination and hour angle axes, and their integral slitheads were integrated with the ten spectrographs. The fiber view camera assembly was installed to the Mayall’s primary mirror cell. Servers for the instrument control system replaced existing computer equipment. The fully integrated instrument has been commissioned and is ready to start its operations phase.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Direct observation of kink evolution due to Hund’s coupling on approach to metal-insulator transition in NiS 2- x Se x

Understanding characteristic energy scales is a fundamentally important issue in the study of strongly correlated systems. In multiband systems, an energy scale is affected not only by the effective Coulomb interaction but also by the Hund’s coupling. Direct observation of such energy scale has been elusive so far in spite of extensive studies. Here, we report the observation of a kink structure in the low energy dispersion of NiS 2- x Se x and its characteristic evolution with x , by using angle resolved photoemission spectroscopy. Dynamical mean field theory calculation combined with density functional theory confirms that this kink originates from Hund’s coupling. We find that the abrupt deviation from the Fermi liquid behavior in the electron self-energy results in the kink feature at low energy scale and that the kink is directly related to the coherence-incoherence crossover temperature scale. Our results mark the direct observation of the evolution of the characteristic temperature scale via kink features in the spectral function, which is the hallmark of Hund’s physics in the multiorbital system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic structure of compressively strained thin film La$_2$PrNi$_2$O$_7$

The discovery of superconductivity in the bulk nickelates under high pressure is a major advance in physics. The recent observation of superconductivity at ambient pressure in compressively strained bilayer nickelate thin films has now enabled direct characterization of the superconducting phase through angle resolved photoemission spectroscopy (ARPES). Here we present an in-situ ARPES study of compressively strained La$_2$PrNi$_2$O$_7$ films grown by oxide molecular beam epitaxy, and the ozone treated counterparts with an onset T$_c$ of 40 K, supplemented with results from pulsed laser deposition films with similar T$_c$. We resolve a systematic strain-driven electronic band shift with respect to that of bulk crystals, in qualitative agreement with density functional theory (DFT) calculations. However, the strongly renormalized flat 3$d_{z2}$ band shifts a factor of 5-10 smaller than anticipated by DFT. Furthermore, it stays ~70 meV below the Fermi level, contradicting the expectation that superconductivity results from the high density of states of this band at the Fermi level. We also observed a non-trivial k$_z$ dispersion of the cuprate-like 3$d_{x2-y2}$ band. Combined with results from both X-ray diffraction and DFT, we suggest that the strained films are under ~5 GPa effective pressure, considerably larger than the naïve expectation from the DFT relaxed structure. Finally, the ~70 meV energy position is intriguingly close to the collective mode coupling more prominently seen in thin films, in the energy range of both oxygen related phonons and the maximum of the spin excitation spectrum.

FOS: Physical sciences↗
DOE OSTI2020

Custom NEON AOP reflectance mosaics and maps of shade masks, canopy water content

This mosaic of visible to shortwave infrared (VSWIR) data was derived from the assignable asset NEON AOP radiance data that was collected by LBNL’s Watershed Function SFA during the summer of 2018 (DOI: 10.15485/1617204). This atmospheric correction was completed to take into account site-specific terrain variability in the 334 km2 survey area centered around Crested Butte, CO. The atmospheric correction was completed using ACORN atmospheric correction software executed on 200 x 200 pixel kernels rather than line by line in order to capture local flight altitude conditions. Manual cloud delineation removed any small shaded areas that occurred within the data collection areas. Mosaics were developed based on preference for days that were in close timing proximity to the coincident ground campaign and with mosaicing criteria that minimized the angle between the sun and the sensor to retrieve the most consistent reflectance (min_phase_refl_tiled). Finally, we generated shade masks based on the geometry between the sun angle at time of flight, the ground surface, and the sensor. Here we provide the orthomosaiced estimated reflectance data (min_phase_refl_tiled.tif), canopy water content (wtrl), estimated atmospheric water vapor (wtrv), the observational data (obs) for this particular mosaic, the estimated visibility (vis), shade masks derived from the digital surface elevation model (shade) and the digital terrain model (shade_tch) added to the canopy height model (DOI: 10.15485/1617203), and a wavelength metadata file. Each image file is provided as a GeoTiff with internal tiling and LZW compression. These data can also be found on Google Earth Engine for extraction, download, and analysis of smaller extents (Google Earth Engine data is linked in external link table).

2018 NEON and 2025 CHESS Campaigns↗
DOE OSTI2022

Combined analysis of Belle and Belle II data to determine the CKM angle φ 3 using B + → D($ {K}_S^0 $h + h – )h + decays

We present a measurement of the Cabibbo-Kobayashi-Maskawa unitarity triangle angle φ 3 (also known as γ) using a model-independent Dalitz plot analysis of B + → D($ {K}_S^0 $h + h – )h + , where D is either a D o or D o ¯ meson and h is either a π or K. This is the first measurement that simultaneously uses Belle and Belle II data, combining samples corresponding to integrated luminosities of 711 fb –1 and 128 fb –1 , respectively. All data were accumulated from energy-asymmetric e + e – collisions at a centre-of-mass energy corresponding to the mass of the Υ(4S) resonance. We measure φ 3 = (78.4 ± 11.4 ± 0.5 ± 1.0)°, where the first uncertainty is statistical, the second is the experimental systematic uncertainty and the third is from the uncertainties on external measurements of the D-decay strong-phase parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Machine learning and process-based modeling of spatiotemporal changes in active layer thickness across Alaska

Permafrost degradation poses a growing threat to infrastructure stability and ecosystem resilience in the rapidly warming Arctic. We investigated the spatiotemporal dynamics of active layer thickness (ALT) across Alaska by integrating field observations, environmental datasets, a physically based Stefan model, and machine learning (ML) techniques. Using weather projections from the Coupled Model Intercomparison Project Phase 6 under two Shared Socioeconomic Pathways (SSP 2-4.5 and SSP 5-8.5), we assessed ALT sensitivity to projected future weather conditions. The random forest (RF) model outperformed the Stefan approach in predicting ALT on the training dataset (R² = 0.84 vs. 0.53) but demonstrated lower generalizability on the test dataset (R² = 0.24 vs. 0.54). The root mean square error (RMSE) for the RF model for training and testing ranged from 14 to 22 cm, compared to 17 and 18 cm for the Stefan model. Variable importance analysis revealed that mean annual temperature and slope angle were the strongest predictors of ALT, accounting for 19% and 18% of the variance, respectively, followed by sediment transport index (14%) and stream power index (11%). Comparative analysis of baseline ALT predictions showed the Stefan model tended to project a thicker active layer (mean ± SD: 65 ± 16 cm), compared to the RF model (mean ± SD: 59 ± 8.8) cm). Both models indicated a latitudinal gradient in ALT, with shallower depths at higher latitudes. Projected ALT increases by 2100 were estimated at 3.3 ± 2.2 cm under SSP 2-4.5 and 5.9 ± 4.0 cm under SSP 5-8.5 for the ML model, whereas the Stefan model projected substantially larger increases of 13 ± 2.6 cm (SSP 2-4.5) and 28 ± 4.4 cm (SSP5-8.5). Spatial analysis showed the greatest ALT increases in northern Alaska, with relatively smaller changes in southern regions. These findings highlight the complex, multifactorial nature of ALT dynamics and the value of hybrid modeling approaches. As rising temperatures accelerate permafrost thaw, changes in ALT can disrupt ecosystems, damage infrastructures, and enhance the release of stored soil carbon, highlighting the urgent need for improved predictive capabilities to inform adaptation strategies in the Arctic.

Climate sciences↗
DOE OSTI2023

Polarization and properties of low-frequency waves in warm magnetized two-fluid plasma

This paper presents the derivation of a general wave dispersion relation for warm magnetized plasma under the two-fluid formalism. The discussion is quite general except for the assumption of low frequency and slow phase speed, for which the displacement current is negligible, under the implicit assumption that the plasma is sufficiently dense to satisfy the condition ωpe>ωce, where ωpe and ωce denote the plasma oscillation frequency and electron gyro frequency, respectively. The present discussion does not invoke charge neutrality associated with the fluctuations although it is implicitly satisfied. The resulting dispersion relation that includes the fluid thermal effects shows that there are three eigen modes, which include those corresponding to ideal MHD, namely, fast, slow, and kinetic Alfvén waves, as well as higher-frequency modes including the ion and electron cyclotron and lower-hybrid resonances. The fluid effects in the ideal MHD wave branches are influenced by the finite Larmor radius scales, and when the wave number in the cross field direction is comparable to these values, the fluid effects become significant. It is found that the Larmor radius should be interpreted in the sense as ion-acoustic gyro-radius instead of ion thermal gyro radius only. That is, it is found that the electrons also contribute to the non-ideal effect associated with the kinetic Alfvén wave. A comprehensive explanation of the polarization of each mode is also presented. The present findings indicate that the polarity may change its sign only for the kinetic Alfvén mode branch and that such a transition is based on the propagation angle. When such a change does take place, it is found that the kinetic Alfvén wave transits to an ion-acoustic mode. For each branch, it is also found that the electric field along the ambient magnetic field is purely transverse.

Physics↗
DOE OSTI2024

Effects of low-frequency voltage on nonlinear standing wave excitation, plasma uniformity, and ion dynamics in dual-frequency asymmetric capacitive discharges

Abstract It is known that in very-high-frequency (VHF) capacitively coupled plasmas, the higher harmonics generated by nonlinear sheath motion can enhance the standing wave effect (SWE), which can lead to center-peaked plasma density profiles. In this work, an improved nonlinear electromagnetic model incorporating a transmission line model, an electron momentum balance model, a bulk plasma model, a collisionless nonlinear numerical sheath model, and an ion Monte-Carlo collision (MCC) model is developed to study the effects of low-frequency (LF) voltage V L on the nonlinear standing wave excitation, plasma uniformity, and ion energy and angular distribution functions (IEDFs and IADFs) in dual-frequency (DF) asymmetric capacitive argon discharges at relatively low pressure of 3 Pa. The plasma diffusion in the radial direction and ion dynamics within the LF oscillating sheath are self-consistently considered. The LF voltage V L at 2 MHz varies from 0 to 700 V while the HF voltage V H at 60 MHz is fixed at 100 V. Simulation results indicate that without the addition of an LF source (i.e. V L = 0 V), there are a considerable number of high-order harmonics with short wavelengths, leading to significant SWE and central peak in the radial plasma density profile. Nevertheless, the high-order harmonic excitations tend to be weakened and merely occur around the phase of the full LF sheath collapse due to a shorter characteristic damping time of the surface waves as V L increases. This, combined with increased surface wavelengths of both the driving frequency and the higher harmonics at a higher V L , leads to suppressed standing waves and improved plasma uniformity. Meanwhile, the simulations show that both the low and the high energy peaks of IEDF move towards higher energies, and the energy peak separation width ΔEbecomes wider with the increase of V L . The IEDF at the radial center of the powered electrode exhibits a broader ΔEthan that at the edge. For the IADF, an increased V L results in more ions incident on the electrode with a smaller deflection angle. Because of a thinner sheath and a higher sheath voltage at the electrode center, the peak value of IADF at the electrode center is greater than that at the edge.

Physics↗
DOE OSTI2023

Spin-textured neutron beams with orbital angular momentum

In this work, we present a rigorous theoretical framework underpinning the technique of spin-echo modulated small-angle neutron scattering (SEMSANS), and show how the technique can be extended in order to generate spin-textured neutron beams with orbital angular momentum (OAM) via birefringent neutron spin-polarization devices known as magnetic Wollaston prisms. Neutron OAM beams are mathematically characterized by a “cork-screw” phase singularity e iℓΦ about the propagation axis where ℓ is the OAM quantum number. To understand the precise relationship between the emergent OAM state and the variety of spin textures realized by various setups, we have developed a path-integral approach that in the interferometric limit makes a judicious use of magnetic Snell's law. We show that our proposed technique produces a complex two-dimensional pattern of spin-OAM entangled states which may be useful as a probe of quantum magnetic materials. We compare our path-integral approach to the well-known single-path Larmor precession model and present a pedagogical derivation of magnetic Snell's law of refraction for both massive and massless particles based on Maupertuis's action principle.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Evidence That Sharp Interfaces Suppress Recombination in Thick Organic Solar Cells

Commercialization and scale-up of organic solar cells (OSCs) using industrial solution printing requires maintaining maximum performance at active-layer thicknesses >400 nm – a characteristic still not generally achieved in non-fullerene acceptor OSCs. NT812:PC71BM is a rare system whose performance increases up to these thicknesses due to highly suppressed charge recombination relative to the classic Langevin model. The suppression in this system, however, uniquely depends on device processing, pointing towards the role of nano-morphology. We investigate the morphological origins of this suppressed recombination by combining results from a suite of X-ray techniques. We are surprised to find that while all investigated devices are composed of pure, similarly aggregated nanodomains, Langevin reduction factors can still be tuned from ~2 to >1000. This indicates that pure aggregated phases are insufficient for non-Langevin (reduced) recombination. Instead, we find that large well-ordered conduits and, in particular, sharp interfaces between domains appear to help to keep opposite charges separated and percolation pathways clear for enhanced charge collection in thick active layers. To our knowledge, this is the first quantitative study to isolate donor/acceptor interfacial width correlated to non-Langevin charge recombination. Furthermore, this new structure-property relationship will be key to successful commercialization of printed OSCs at scale.

14 SOLAR ENERGY↗
DOE OSTI2021

Mechanisms of Ti 3 Al precipitation in hcp α -Ti

Here, nucleation and growth of Ti3Al α( 2 ) ordered domains in alpha-Ti-Al-X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model alloys based on Ti-7Al (wt.%) and containing O, V and Mo were aged at 550 °C for times up to 120d and the resulting precipitate dispersions were observed at intermediate points. Precipitates grew to around 30nm in size, with a volume fraction of 6-10% depending on tertiary solutes. Interstitial O was found to increase the equilibrium volume fraction of α 2 , while V and Mo showed relatively little influence. Addition of any of the solutes in this study, but most prominently Mo, was found to increase nucleation density and decrease precipitate size and possibly coarsening rate. Coarsening can be described by the Lifshitz-Slyozov-Wagner model, suggesting a matrix diffusion-controlled coarsening mechanism (rather than control by interfacial coherency). Solutionising temperature was found to affect nucleation number density with an activation energy of E f = 1.5 +/- 0.4 eV, supporting the hypothesis that vacancy concentration affects α 2 nucleation. The observation that all solutes increase nucleation number density is also consistent with a vacancy-controlled nucleation mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2022

KCo 2 As 2 : A new portal for the physics of high-purity metals

High-quality single crystals of KCo 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure were grown using KAs self flux. Structural, magnetic, thermal, and electrical transport properties were investigated. No clear evidence for any phase transitions was found in the temperature range 2–300 K. The in-plane electrical resistivity ρ versus temperature T is highly unusual, showing a T 4 behavior below 30 K and an anomalous positive curvature up to 300 K, which is different from the linear behavior expected from the Bloch-Grüneisen theory for electron scattering by acoustic phonons. This positive curvature has been previously observed in the in-plane resistivity of high-conductivity layered delafossites such as PdCoO 2 and PtCoO 2 . The in-plane ρ(T → 0) = 0.36μΩ cm of KCo 2 As 2 is exceptionally small for this class of compounds. The material also exhibits a magnetoresistance at low T which attains a value of about 40% at T = 2 K and magnetic field H = 80 kOe. The magnetic susceptibility χ of KCo 2 As 2 is isotropic and about an order of magnitude smaller than the values for the related compounds SrCo 2 As 2 and BaCo 2 As 2 . The χ increases above 100 K, which is found from our first-principles calculations to arise from a sharp peak in the electronic density of states just above the Fermi energy E F . Heat capacity C p (T) data at low T yield an electronic density of states N(E F ) that is about 36% larger than predicted by the first-principles theory. The C p (T) data near room temperature suggest the presence of excited optic vibration modes, which may also be the source of the positive curvature in ρ(T). Angle-resolved photoemission spectroscopy measurements are compared with the theoretical predictions of the band structure and Fermi surfaces. In conclusion, our results show that KCo 2 As 2 provides a new avenue for investigating the physics of high-purity metals.

36 MATERIALS SCIENCE↗