SEARCH · Search NASA

Results for “representativeness analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1955

The Compressible Laminar Boundary Layer with Fluid Injection

A solution of the equations of the compressible laminar boundary layer including the effects of transpiration cooling is presented. The analysis applies to the flow over an isothermal porous plate with a velocity of fluid injection proportional to the reciprocal of the square root of the distance from the leading edge. The effect of several flow parameters on coolant-flow rates is discussed with the aid of representative examples. A stability analysis indicates that, although transpiration cooling requires a lower surface temperature for stable flow than does internal wall cooling, this lower temperature can be obtained with a smaller expenditure of coolant.

Low, George M↗

NASA NTRS2011

On Time Delay Margin Estimation for Adaptive Control and Optimal Control Modification

This paper presents methods for estimating time delay margin for adaptive control of input delay systems with almost linear structured uncertainty. The bounded linear stability analysis method seeks to represent an adaptive law by a locally bounded linear approximation within a small time window. The time delay margin of this input delay system represents a local stability measure and is computed analytically by three methods: Pade approximation, Lyapunov-Krasovskii method, and the matrix measure method. These methods are applied to the standard model-reference adaptive control, s-modification adaptive law, and optimal control modification adaptive law. The windowing analysis results in non-unique estimates of the time delay margin since it is dependent on the length of a time window and parameters which vary from one time window to the next. The optimal control modification adaptive law overcomes this limitation in that, as the adaptive gain tends to infinity and if the matched uncertainty is linear, then the closed-loop input delay system tends to a LTI system. A lower bound of the time delay margin of this system can then be estimated uniquely without the need for the windowing analysis. Simulation results demonstrates the feasibility of the bounded linear stability method for time delay margin estimation.

Nguyen, Nhan T.↗

NASA NTRS2011

Autonomous Aerobraking: Thermal Analysis and Response Surface Development

A high-fidelity thermal model of the Mars Reconnaissance Orbiter was developed for use in an autonomous aerobraking simulation study. Response surface equations were derived from the high-fidelity thermal model and integrated into the autonomous aerobraking simulation software. The high-fidelity thermal model was developed using the Thermal Desktop software and used in all phases of the analysis. The use of Thermal Desktop exclusively, represented a change from previously developed aerobraking thermal analysis methodologies. Comparisons were made between the Thermal Desktop solutions and those developed for the previous aerobraking thermal analyses performed on the Mars Reconnaissance Orbiter during aerobraking operations. A variable sensitivity screening study was performed to reduce the number of variables carried in the response surface equations. Thermal analysis and response surface equation development were performed for autonomous aerobraking missions at Mars and Venus.

Dec, John A.↗

NASA NTRS1989

Correlation Analysis Of Vibration Data From Rotary Pumps

Correlation technique represents vibration data from rotary pumps in compact form convenient for storage in data base. Analysis determines coefficients of Fourier series representing typical response of pump for one revolution of pump shaft. Changes in harmonic spectrum of pump indicates changes in performance caused by internal wear, rubbing of seals, and the like.

Fenwick, James R.↗

NASA NTRS1992

A field measure of the shade fraction

'Shade' has a technical definition peculiar to linear spectral mixture analysis of imaging spectrometer data: it is the reduction in radiance from a surface due to lighting conditions and geometry, and includes topographic shading described by photometric functions as well as shadowing at all scales. 'Shade' is an important constituent of nearly all remotely sensed images, and is one endmember resolved in spectral mixture analysis, where it is represented as a fraction of the measured radiance and a characteristic spectrum. This spectrum is typically the null vector, provided the data have been corrected for atmospheric and instrument effects: i.e., 'shade' is the radiance from an ideal black surface. In topographic shading, irradiance is reduced - typically in proportion to cos(i), where i (incidence angle) is the angle between the sun and the local surface normal vectors. Therefore, the radiance is lowered by a multiplicative factor. Shadowing occurs when i is greater than 90 deg, or when sunlight is blocked by adjacent high terrain; the only irradiance is down-welling skylight and bounce light from adjacent terrain. In spectral mixture analysis, 'shade' is regarded as an additive term. In this regard, it is an accurate description of the proportion of a scene that consists of ideal shadows ('checkerboard mixing'); however, 'shade' represents the multiplicative cos(i) factor as well, as here it should be interpreted as the proportion of shadow that would darken the scene an equivalent amount. In either case, the 'shade' fraction is lessened by adjacency effects, because the scene has a non-zero reflectivity instead of the ideal black surface generally assumed.

Gillespie, Alan R.↗

NASA NTRS2012

HVI Ballistic Performance Characterization of Non-Parallel Walls

The Double-Wall, "Whipple" Shield [1] has been the subject of many hypervelocity impact studies and has proven to be an effective shield system for Micro-Meteoroid and Orbital Debris (MMOD) impacts for spacecraft. The US modules of the International Space Station (ISS), with their "bumper shields" offset from their pressure holding rear walls provide good examples of effective on-orbit use of the double wall shield. The concentric cylinder shield configuration with its large radius of curvature relative to separation distance is easily and effectively represented for testing and analysis as a system of two parallel plates. The parallel plate double wall configuration has been heavily tested and characterized for shield performance for normal and oblique impacts for the ISS and other programs. The double wall shield and principally similar Stuffed Whipple Shield are very common shield types for MMOD protection. However, in some locations with many spacecraft designs, the rear wall cannot be modeled as being parallel or concentric with the outer bumper wall. As represented in Figure 1, there is an included angle between the two walls. And, with a cylindrical outer wall, the effective included angle constantly changes. This complicates assessment of critical spacecraft components located within outer spacecraft walls when using software tools such as NASA's BumperII. In addition, the validity of the risk assessment comes into question when using the standard double wall shield equations, especially since verification testing of every set of double wall included angles is impossible.

Bohl, William↗

NASA NTRS1969

Analysis of a Multiprocessor Guidance Computer

The design of the next generation of spaceborne digital computers is described. It analyzes a possible multiprocessor computer configuration. For the analysis, a set of representative space computing tasks was abstracted from the Lunar Module Guidance Computer programs as executed during the lunar landing, from the Apollo program. This computer performs at this time about 24 concurrent functions, with iteration rates from 10 times per second to once every two seconds. These jobs were tabulated in a machine-independent form, and statistics of the overall job set were obtained. It was concluded, based on a comparison of simulation and Markov results, that the Markov process analysis is accurate in predicting overall trends and in configuration comparisons, but does not provide useful detailed information in specific situations. Using both types of analysis, it was determined that the job scheduling function is a critical one for efficiency of the multiprocessor. It is recommended that research into the area of automatic job scheduling be performed.

Maltach, E. G.↗

NASA NTRS2001

User's Manual and Final Report for Hot-SMAC GUI Development

A new software package called Higher Order Theory-Structural/Micro Analysis Code (HOT-SMAC) has been developed as an effective alternative to the finite element approach for Functionally Graded Material (FGM) modeling. HOT-SMAC is a self-contained package including pre- and post-processing through an intuitive graphical user interface, along with the well-established Higher Order Theory for Functionally Graded Materials (HOTFGM) thermomechanical analysis engine. This document represents a Getting Started/User's Manual for HOT-SMAC and a final report for its development. First, the features of the software are presented in a simple step-by-step example where a HOT-SMAC model representing a functionally graded material is created, mechanical and thermal boundary conditions are applied, the model is analyzed and results are reviewed. In a second step-by-step example, a HOT-SMAC model of an actively cooled metallic channel with ceramic thermal barrier coating is built and analyzed. HOT-SMAC results from this model are compared to recently published results (NASA/TM-2001-210702) for two grid densities. Finally, a prototype integration of HOTSMAC with the commercially available HyperSizer(R) structural analysis and sizing software is presented. In this integration, local strain results from HyperSizer's structural analysis are fed to a detailed HOT-SMAC model of the flange-to-facesheet bond region of a stiffened panel. HOT-SMAC is then used to determine the peak shear and peel (normal) stresses between the facesheet and bonded flange of the panel and determine the "free edge" effects.

Yarrington, Phil↗

NASA NTRS1995

Task Analytic Models to Guide Analysis and Design: Use of the Operator Function Model to Represent Pilot-Autoflight System Mode Problems

Task-analytic models structure essential information about operator interaction with complex systems, in this case pilot interaction with the autoflight system. Such models serve two purposes: (1) they allow researchers and practitioners to understand pilots' actions; and (2) they provide a compact, computational representation needed to design 'intelligent' aids, e.g., displays, assistants, and training systems. This paper demonstrates the use of the operator function model to trace the process of mode engagements while a pilot is controlling an aircraft via the, autoflight system. The operator function model is a normative and nondeterministic model of how a well-trained, well-motivated operator manages multiple concurrent activities for effective real-time control. For each function, the model links the pilot's actions with the required information. Using the operator function model, this paper describes several mode engagement scenarios. These scenarios were observed and documented during a field study that focused on mode engagements and mode transitions during normal line operations. Data including time, ATC clearances, altitude, system states, and active modes and sub-modes, engagement of modes, were recorded during sixty-six flights. Using these data, seven prototypical mode engagement scenarios were extracted. One scenario details the decision of the crew to disengage a fully automatic mode in favor of a semi-automatic mode, and the consequences of this action. Another describes a mode error involving updating aircraft speed following the engagement of a speed submode. Other scenarios detail mode confusion at various phases of the flight. This analysis uses the operator function model to identify three aspects of mode engagement: (1) the progress of pilot-aircraft-autoflight system interaction; (2) control/display information required to perform mode management activities; and (3) the potential cause(s) of mode confusion. The goal of this paper is twofold: (1) to demonstrate the use of the operator functio model methodology to describe pilot-system interaction while engaging modes And monitoring the system, and (2) to initiate a discussion of how task-analytic models might inform design processes. While the operator function model is only one type of task-analytic representation, the hypothesis of this paper is that some type of task analytic structure is a prerequisite for the design of effective human-automation interaction.

Degani, Asaf↗

NASA NTRSDate not supplied

Adaptive Learning for Reliability Analysis using Support Vector Machines

A novel algorithm is presented for adaptive learning of an unknown function that separates two regions of a domain.In the context of reliability analysis these two regions represent the failure domain, where a set of constraints or requirements are violated, and a safe domain where they are satisfied. The Limit State Function (LSF) separates these two regions. Evaluating the constraints for a given parameter point requires the evaluation of a computational model that may well be expensive. For this reason we wish to construct a meta-model that can estimate the LSFas accurately as possible, using only a limited amount of training data. This work presents an adaptive strategy employing a Support Vector Machine (SVM) as a meta-model to provide a semi-algebraic approximation of the LSF.We describe an optimization process that is used to select informative parameter points to add to training data at each iteration to improve the accuracy of this approximation. A formulation is introduced for bounding the predictions of the meta-model; in this way we seek to incorporate this aspect of Gaussian Process Models (GPMs) within anSVM meta-model. Finally, we apply our algorithm to two benchmark test cases, demonstrating performance that is comparable with, if not superior, to a standard technique for reliability analysis that employs GPMs

Adaptive learning↗

NASA NTRS1972

ERISTAR: Earth Resources Information Storage, Transformation, Analysis, and Retrieval

The National Aeronautics and Space Administration (NASA) and the American Society for Engineering Education (ASEE) have sponsored faculty fellowship programs in systems engineering design for the past several years. During the summer of 1972 four such programs were conducted by NASA, with Auburn University cooperating with Marshall Space Flight Center (MSFC). The subject for the Auburn-MSFC design group was ERISTAR, an acronym for Earth Resources Information Storage, Transformation, Analysis and Retrieval, which represents an earth resources information management network of state information centers administered by the respective states and linked to federally administered regional centers and a national center. The considerations for serving the users and the considerations that must be given to processing data from a variety of sources are described. The combination of these elements into a national network is discussed and an implementation plan is proposed for a prototype state information center. The compatibility of the proposed plan with the Department of Interior plan, RALI, is indicated.

Source record↗

NASA NTRS1973

Digital analysis of Potomac River Basin ERTS imagery: Sedimentation levels at the Potomac-Anacostia confluence and strip mining in Allegheny County, Maryland

Two simple algorithms for classification of sedimentation levels in water and for delineation of active strip mines are in use as part of the development of a more general resource management information system. ERTS MSS CCT's are processed so that each pixel in each channel is geographically referenced and can be accessed individually during whole frame, multi-channel analysis or partial frame analysis. The sedimentation analysis clearly separates classes representing the turbid Anacostia water, the less disturbed Potomac (really), and mud flats resulting from effluent of a major sewage treatment plant. Mud flats of organic or mineral origin are easily distinguished.

Schubert, J. S.↗

NASA NTRS1975

Fracture toughness testing data. A bibliography

This bibliography is comprised of approximately 800 reference citations related to the mechanics of failure in aerospace structures. Most of the references are for documents that include fracture toughness testing data and its application or documents on the availability and usefulness of fracture mechanics analysis methodology. The bibliography represents a search of the literature published in the period April 1962 through April 1974 and is largely limited to documents published in the United States.

Carpenter, J. L., Jr.↗

NASA NTRS1975

SEPS guidance and navigation autonomy selection via mission analysis

A systematic rationale for selecting a cost-effective guidance and navigation (G & N) autonomy level for the solar electric propulsion stage (SEPS) vehicle is developed. After a definition of autonomy levels, a mission analysis is performed for representative SEPS missions using realistic G & N sensor hardware. Cost data for fabricating, integrating and refurbishing onboard avionics hardware and the ground costs corresponding to each autonomy level are generated. Results are presented that indicate performance of various G & N sensor hardware sets and the dominating factors which influence G & N autonomy level selection.

Causey, W.↗

NASA NTRS1976

Design of a Mars entry 'aeroshell'

The external shell of the Project Viking capsule, which will provide atmospheric deceleration for the 1976 landing of an unmanned spacecraft on the surface of Mars, is a wide-angle, stiffened cone subject to buckling under entry aerodynamic pressure. Complex, highly optimized structural prototype and flight designs were evolved through the application of relatively advanced buckling analysis methodology. Both designs were evaluated through tests and analysis with improved shell-of-revolution computer programs. Deviations between the analyses and experiments were resolved only by modeling the thin-walled rings as shell branches. The results illustrate the great complexity of shell behavior and the designer's need for reliable analysis tools capable of representing detailed structural behavior with greater accuracy than is current practice.

Leonard, R. W.↗

NASA NTRS1976

The kinetics of lunar glass formation, revisited

The nucleation frequency of Lunar Composition 70019, a lithified soil breccia from the center of a small crater in the Taurus-Littrow Valley, is determined using a relation that describes nucleation throughout the volume of a liquid together with measurements of the time required at temperatures of 780 to 930 C to obtain sensibly crystalline bodies. Curves indicating the time required at a given temperature to reach a particular fraction crystallized are shown to have the general form predicted by kinetic analysis. Nucleation frequencies are evaluated by applying such analysis to a curve representing the transition between glassy material and material with a sensible degree of crystallinity. The results obtained are found to be in excellent agreement with the values expected from the classical theory of homogeneous nucleation, indicating that such nucleation represents the dominant contribution to crystal formation, at least over the range of undercoolings covered (250 to 400 C).

Klein, L. C.↗

NASA NTRS1978

Aeroelastic stability and response of horizontal axis wind turbine blades

The coupled flap-lag-torsion equations of motion of an isolated horizontal axis wind turbine blade are formulated. Quasi-steady blade-element strip theory was applied to derive the aerodynamic operator which includes boundary layer type gradient winds. The final equations which have periodic coefficients were solved in order to obtain the aeroelastic response and stability of large horizontal axis wind turbine blade. A new method of generating an appropriate time-dependent equilibrium position (required for the stability analysis) has been implemented. Representative steady-state responses and stability boundaries, applicable mainly to an existing blade design (NASA/-ERDA MOD-0), are presented. The results indicate that the MOD-0 configuration is a basically stable design and that blade stability is not sensitive to offsets between blade elastic axis and aerodynamic center. Blade stability appears to be sensitive to precone. The tower shadow (or wake) has a considerable effect on the flap response but leaves blade stability unchanged. Finally, it was found that non linear terms in the equations of motion can significantly affect the linearized stability boundaries, however, these terms have a negligible effect on blade response at operating conditions.

Kottapalli, S. B. R.↗

NASA NTRS1981

Three-dimensional separated flows past ground vehicles

The separated flow past a thick body is calculated using a theoretical model based on a discrete wake-vortex representation. Rehbach's unsteady inviscid scheme (1977) was used in the three-dimensional analysis. The obstacle is represented by singularities, and the wake is modeled by vortex particles emitted at the separation line. Calculated results for an axisymmetric body are compared with flow visualization results.

Chometon, F.↗