Search NASA⌕ Search

SEARCH · Search NASA

Results for “root dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Molecular Origin of Nanoscale Anion Ordering of LiTFSI Electrolytes Revealed through SAXS/WAXS and Molecular Dynamics Simulations

Recent developments in “water-in-salt” electrolytes have precipitated a renewed effort to study imide-based electrolytes. While previous small-/wide-angle X-ray scattering (SAXS/WAXS) studies have attributed the emergence of a low-Q peak in the SAXS profile of aqueous LiTFSI electrolytes to nanometer-scale anion clustering, a molecular-level understanding of the root of these clusters remains unclear. Here, in this study, we combined molecular dynamics simulations and SAXS/WAXS to study the solvation structures of LiTFSI in acetonitrile, methanol, and water. We concluded that hydrogen bonding in water and MeOH stabilizes anion clusters, while nonpolar methyl groups on methanol and acetonitrile interrupt the nanoscale ordering of TFSI anions. This causes LiTFSI in water and MeOH electrolytes to exhibit two low-Q SAXS profile peaks while LiTFSI in acetonitrile exhibits only a single peak below Q = 1 Å –1 . These findings shed light on the underlying molecular origins of nanoscale anion clusters, which may help in the design of the next generation of electrolyte chemistries.

Trojanowski, Lucas [Univ. of Michigan, Ann Arbor, ↗
DOE OSTI2020

Multi-device study of temporal characteristics of magnetohydrodynamic modes initiating disruptions

Disruptions in tokamaks are often preceded by magnetohydrodynamic (MHD) instabilities that can rotate or become locked to the wall. Measurements from magnetic diagnostics in the presence of MHD mode precursors to disruptions can yield potentially valuable input to the plasma control system, with a view to disruption avoidance, prediction and mitigation. This report presents an exploratory analysis of the growth of MHD modes and corresponding time scales on the basis of magnetic measurements in multiple tokamaks. To this end, a database was compiled using disruptive discharges from COMPASS, ASDEX Upgrade, DIII-D and JET, manually classified according to disruption root cause, and characterized by a great diversity of operational conditions and mode dynamics. The typical time during which a mode can be detected using saddle coils and the duration of the locked mode phase in the database both extend over several orders of magnitude, but generally the time scales increase with plasma size. Several additional factors are discussed that can influence these durations, including the disruption root cause. A scaling law for the locked phase duration was estimated, yielding predictions toward ITER of the order of hundreds of milliseconds or even seconds. In addition, a scaling law for the mode amplitude at the disruption onset, proposed earlier by de Vries et al. (2016), is applied to the database, and its predictive capabilities are assessed. Despite significant uncertainty on the predictions from both scaling laws, encouraging trends are observed of the fraction of disruptions that may be detected with sufficient warning time to allow mitigation or even avoidance, based solely on observations of MHD mode dynamics. When combined with similar analysis of measurements from diagnostics that are sensitive to other disruption precursors, our analysis methods and results may contribute to the reliability, robustness and generalization of disruption warning schemes for ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Investigation of Abnormal Level Control Oscillations in a BWR Feedwater System

In the long-term operation of nuclear power plants, the aging of systems, structures, and components can lead to maintenance issues that must be dealt with to maintain cost-effective plant operations. One common issue affecting the currently operated boiling water reactors is the onset of unexpected level oscillations in feedwater heaters. This phenomenon can cause excessive cycling of drain valves and lead to premature failures. In this work, we develop a dynamic model of a set of feedwater heaters to determine the root cause of oscillations observed in an operating plant. Simulation results of various transient scenarios were used to investigate the effects of the controller parameters, boundary conditions, and possible valve and instrument issues. The analysis led to the conclusion that the most likely causes of the observed self-sustained oscillations in the system are the nonlinear behaviors of the drain valve and the level transmitter induced by degraded equipment condition. In conclusion, a partial plug of the pressure line used for level sensing in the system can account for a significant deadtime in the level transmitter, a nonlinear effect shown to induce self-sustained oscillatory behaviors.

Boiling water reactors↗
DOE OSTI2021

Genome-resolved metagenomics reveals role of iron metabolism in drought-induced rhizosphere microbiome dynamics

Recent studies have demonstrated that drought leads to dramatic, highly conserved shifts in the root microbiome. At present, the molecular mechanisms underlying these responses remain largely uncharacterized. Here we employ genome-resolved metagenomics and comparative genomics to demonstrate that carbohydrate and secondary metabolite transport functionalities are overrepresented within drought-enriched taxa. These data also reveal that bacterial iron transport and metabolism functionality is highly correlated with drought enrichment. Using time-series root RNA-Seq data, we demonstrate that iron homeostasis within the root is impacted by drought stress, and that loss of a plant phytosiderophore iron transporter impacts microbial community composition, leading to significant increases in the drought-enriched lineage, Actinobacteria. Finally, we show that exogenous application of iron disrupts the drought-induced enrichment of Actinobacteria, as well as their improvement in host phenotype during drought stress. Collectively, our findings implicate iron metabolism in the root microbiome’s response to drought and may inform efforts to improve plant drought tolerance to increase food security.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Assessing Dynamic Behaviors in Converter- Dominated Power Systems via RMS and EMT Simulations: A Study of Hawaii’s NELHA Microgrid

The transition from conventional power systems to converter-based microgrids has significantly advanced sustainability, clean energy integration, and operational reliability. However, this paradigm shift introduces operational challenges due to the intermittent nature of renewable energy sources and the non-linear characteristics of power electronic loads, inducing voltage fluctuations and harmonic distortions that complicate voltage and frequency regulation. Accurate dynamic modeling is hypothesized to be critical for capturing such effects, enabling reliable simulation and control strategy development. This study introduces an innovative dynamic modeling framework for a real-world converter-based microgrid, utilizing both root mean square (RMS) and electromagnetic transient (EMT) simulation methods. The microgrid was modeled in DIgSILENT PowerFactory, with simulations calibrated against high-resolution field measurements from SEL-735 power quality meters. Results show that RMS simulations effectively characterize steady-state dynamics, while EMT simulations are essential for capturing high-frequency transients and non-linear effects from photovoltaic inverters and variable frequency drives (VFDs). This complementary approach provides a comprehensive understanding of microgrid behavior, providing critical insights for improving simulation accuracy, advancing protection schemes, and improving resilience in future low-inertia power networks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Plant root exudates and rhizosphere bacterial communities shift with neighbor context

A plant's neighborhood context can alter its interactions with other organisms, but little is known about how these dynamics occur belowground, especially with soil microbes. Microbial communities in rhizosphere soil are influenced by many factors, including abiotic conditions and root-derived signals. In particular, root exudates have strong effects on rhizosphere assembly, respond to changes in abiotic conditions, and help plants interact with neighbors. Therefore, we predicted that root exudates likely play a central role in neighbor-induced shifts in rhizosphere communities. We conducted a greenhouse experiment to test this and determine how the rhizosphere bacterial community of a focal plant, Panicum virgatum, changed when beside different neighbors, and whether these shifts were mediated by neighbor-induced changes in root exudation. We found that neighbor altered both focal plant exudates and rhizosphere community, and that changes were largest when the focal plant was beside the most competitive neighbor, Rudbeckia hirta, which reduced both focal plant growth and nitrogen uptake. Several factors contributed to neighbor impacts on rhizosphere assembly, including neighbor-induced changes in root exudates during nitrogen-limitation and microbial spillover from roots of larger neighbors. Using an additional soil incubation, we also found that these changes in exudates can have even greater effects on soil nutrients than on microbial assembly. Overall, we show that neighbors influence one another's microbiomes, and highlight neighbor-induced changes in root exudates as one mechanism through which this may occur. Furthermore, this work suggests that rhizosphere assembly may differ in mixed-species communities and thus emphasizes a need for microbiome studies that consider neighborhood context.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1995

Studies of the draping and flaring angles of the Mars and Earth magnetotails

Observations of the Mars tail by the spacecraft have been used to estimate the draping angle of the magnetic field within the tail and the boundary flaring angle. The boundary of the tail is defined by the sudden disappearance of the proton flux by the TAUS ion spectrometer. Solar wind measurements by the TAUS instrument are used to calculate the approximate solar wind dynamic pressure when the spacecraft is within the tail boundary. The average draping angle (Acrsin((square root of (B(sub y)(exp 2) + B(sub z)(exp 2)))/B(sub T))) is found to be 27.2 deg +/- 1.4 deg. The draping angle magnitude depends on the solar wind dynamic pressure, but is quite variable. The flaring angle of the tail boundary at X = -2.5 R(sub M) has also been calculated from the balance of pressure between the lobe of the Martian tail and the component pressures of the solar wind. The flaring angle depends strongly on the solar wind dynamic pressure, and this dependence is identical to that obtained at the Earth by Petrinec and Russell. However, the magnitude of the flaring angle at Mars X = -2.5 R(sub M) is one-half the value obtained at Earth for -22.5 R(sub E) is less than or equal to X -10 R(sub E).

Zhang, T.-L.↗
NASA NTRS2003

Viscoelastic Vibration Dampers for Turbomachine Blades

Simple viscoelastic dampers have been invented for use on the root attachments of turbomachine blades. These dampers suppress bending- and torsion-mode blade vibrations, which are excited by unsteady aerodynamic forces during operation. In suppressing vibrations, these dampers reduce fatigue (thereby prolonging blade lifetimes) while reducing noise. These dampers can be installed in new turbomachines or in previously constructed turbomachines, without need for structural modifications. Moreover, because these dampers are not exposed to flows, they do not affect the aerodynamic performances of turbomachines. Figure 1 depicts a basic turbomachine rotor, which includes multiple blades affixed to a hub by means of dovetail root attachments. Prior to mounting of the blades, thin layers of a viscoelastic material are applied to selected areas of the blade roots. Once the blades have been installed in the hub and the rotor is set into rotation, centrifugal force compresses these layers between the mating load-bearing surfaces of the hub and the blade root. The layers of viscoelastic material provide load paths through which the vibration energy of the blade can be dissipated. The viscoelasticity of the material converts mechanical vibration energy into shear strain energy and then from shear strain energy to heat. Of the viscoelastic materials that have been considered thus far for this application, the one of choice is a commercial polyurethane that is available in tape form, coated on one side with an adhesive that facilitates bonding to blade roots. The thickness of the tape can be chosen to suit the specific application. The typical thickness of 0.012 in. (.0.3 mm) is small enough that the tape can fit in the clearance between the mating blade-root and hub surfaces in a typical turbomachine. In an experiment, a blade was mounted in a test fixture designed to simulate the blade-end conditions that prevail in a turbocompressor. Vibrations were excited in the blade by use of an impact hammer, and damping of the vibrations was measured by use of a dynamic signal analyzer. Tests were performed without and with viscoelastic dampers installed in the dovetail root attachment. The results of the measurements, some of which are presented in Figure 2, show that the viscoelastic dampers greatly increased the rate of damping of vibrations. Accordingly, dynamic stresses on rotor blades were significantly reduced, as shown in Figure 2.

Nguyen, Nhan↗
DOE OSTI2024

Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics (Blodgett, CA)

This dataset contains data on daily soil temperature, moisture and flux, and soil carbon stock and root biomass across a soil profile down to 100 cm depth at Blodgett Forest Research Station, CA, USA. These data were generated to determine if modeling of an experimental soil warming of 4C showed increased soil CO2 emissions and changes in bulk soil carbon stocks with depth consistent with field observations, as part of the study: Riley et al. (2025) Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics in Journal of Advances in Modeling Earth Systems. This research was performed within the framework of the TES Belowground Biogeochemistry SFA project, in particular association with a 1 m-deep experimental soil heating experiment at the University of California Blodgett Forest Research Station, California (120 ° 39′40′′W; 38 ° 54′43′′N). Continuous data were collected at the plot level, and bulk soil carbon and root biomass were sampled once a year from each plot from 0-100 cm, in 10 cm intervals. Measurements relevant to the current study include soil temperature and soil volumetric water content measured continuously at multiple depths in the top meter; fine root biomass and SOC stocks measured from annual soil cores. Soil flux was continuously monitored using a LI-8100 Automated CO2 Flux System in conjunction with the LI-8150 Multiplexer (Licor, Nebraska, USA). Soil flux was determined using SoilFluxPro software, with flux values showing an R² fit of less than 0.9 being excluded from the analysis. Data were collected from each paired plot (1-3): one control (C) and one heated (H).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Transcriptomics reveal a mechanism of niche defense: two beneficial root endophytes deploy an antimicrobial GH18-CBM5 chitinase to protect their hosts

Effector secretion is crucial for root endophytes to establish and protect their ecological niche. We used time-resolved transcriptomics to monitor effector gene expression dynamics in two closely related Sebacinales, Serendipita indica and Serendipita vermifera, during symbiosis with three plant species, competition with the phytopathogenic fungus Bipolaris sorokiniana, and cooperation with root-associated bacteria. We observed increased effector gene expression in response to biotic interactions, particularly with plants, indicating their importance in host colonization. Some effectors responded to both plants and microbes, suggesting dual roles in intermicrobial competition and plant–microbe interactions. A subset of putative antimicrobial effectors, including a GH18-CBM5 chitinase, was induced exclusively by microbes. Functional analyses of this chitinase revealed its antimicrobial and plant-protective properties. We conclude that dynamic effector gene expression underpins the ability of Sebacinales to thrive in diverse ecological niches with a single fungal chitinase contributing substantially to niche defense.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1976

An analytical study and wind tunnel tests of an aeromechanical gust-alleviation system for a light airplane

The results of an analytical study of a system using stability derivatives determined in static wind tunnel tests of a 1/6 scale model of a popular, high wing, light airplane equipped with the gust alleviation system are reported. The longitudinal short period mode dynamics of the system are analyzed, and include the following: (1) root loci, (2) airplane frequency responses to vertical gusts, (3) power spectra of the airplane responses in a gust spectrum, (4) time history responses to vertical gusts, and (5) handling characteristics. The system reduces the airplane's normal acceleration response to vertical gusts while simultaneously increasing the pitching response and reducing the damping of the longitudinal short period mode. The normal acceleration response can be minimized by using the proper amount of static alleviation and a fast response system with a moderate amount of damping. The addition of a flap elevator interconnect or a pitch damper system further increases the alleviation while moderating the simultaneous increase in pitching response. The system provides direct lift control and may reduce the stick fixed longitudinal static stability.

Stewart, E. C.↗
NASA NTRS1980

The hammer QSD-quick stop device for high speed machining and rubbing

A quick stop device (QSD) was designed for use in orthogonal machining and rubbing experiments. QSD's are used to obtain chip root samples that are representative of the deformation taking place during dynamic (actual) cutting conditions. These 'frozen' specimens are helpful in examining the plastic deformation that occurs in the regions of compression and shear which form the chip; the secondary shear at the tool-chip interface; and the nose ploughing/flank rubbing action which operates on the newly machined surface. The Hammer QSD employs a shear pin mechanism, broken by a flying hammer, which is traveling at the same velocity as the workpiece. The device has been successfully tested up to 6000 sfpm (30.48 m/sec).

Black, J. T.↗
NASA NTRS1987

Response of stiffened panels for applications to acoustic fatigue

The surface protection systems of aerospace and aircraft structures are often constructed from discretely stiffened panels. This paper presents an analytical study on dynamic stress response of these structures to random surface flow and acoustic loads. To account for aerodynamic heating of high speed flow, thermal effects are included in the structural model. A generalized transfer matrix procedure is developed to obtain the required dynamic response solutions. Numerical results include spectral densities of stress, response root mean square values and fatigue damage for a variety of loading and thermal conditions.

Vaicaitis, R.↗
NASA NTRS1988

Helicopter stability and control modeling improvements and verification on two helicopters

A linearized model of helicopter flight dynamics is developed which includes the flapping, lead-lag, and dynamic inflow degrees of freedom (DOF). The model is a combination of analytical terms and numerically determined stability derivatives, and is used to investigate the importance of the rotor DOF to stability and control modeling. The results show that the rotor DOF can have a significant impact on some of the natural modes in a linear model. The flap and dynamic inflow DOF show the greatest influence. Flapping exhibits strong coupling to the body, dynamic inflow, and to lead-lag to a lesser extent. Dynamic inflow tends to damp the high-frequency flapping modes, and reduces the damping on coupled body-flap motion. Dynamic inflow also couples to the flapping motion to produce complex roots. With body-flap and lag regressing modes as exceptions, the results show essentially similar behavior for most modes of articulated and hingeless rotor helicopters.

Schrage, D. P.↗
NASA NTRS2012

Joint Chance-Constrained Dynamic Programming

This paper presents a novel dynamic programming algorithm with a joint chance constraint, which explicitly bounds the risk of failure in order to maintain the state within a specified feasible region. A joint chance constraint cannot be handled by existing constrained dynamic programming approaches since their application is limited to constraints in the same form as the cost function, that is, an expectation over a sum of one-stage costs. We overcome this challenge by reformulating the joint chance constraint into a constraint on an expectation over a sum of indicator functions, which can be incorporated into the cost function by dualizing the optimization problem. As a result, the primal variables can be optimized by a standard dynamic programming, while the dual variable is optimized by a root-finding algorithm that converges exponentially. Error bounds on the primal and dual objective values are rigorously derived. We demonstrate the algorithm on a path planning problem, as well as an optimal control problem for Mars entry, descent and landing. The simulations are conducted using a real terrain data of Mars, with four million discrete states at each time step.

Ono, Masahiro↗
NASA NTRS2025

Effect of Strict Head Down Tilt Bedrest on Pituitary Gland Height

BACKGROUND Pituitary gland deformity and loss of pituitary height have been identified in astronauts postflight, hypothesized to be related to increased intracranial pressure or intracranial pressure pulsatility exposure from prolonged weightlessness. Microgravity-induced chronic headward fluid shift has been suggested as a root cause of intracranial compliance changes leading to altered intracranial pressure dynamics. Elevated intracranial pressure or pressure pulsatility is theorized to promote the development of an arachnoid diverticulum, which herniates into the pituitary fossa via a defect in the diaphragma sellae compressing the pituitary gland. We aimed to determine if chronic headward fluid induced by strict head-down tilt bed rest (HDTBR) can cause similar quantitative changes in pituitary gland height. METHODS Control group data from two 6-degree HDTBR studies were analyzed (SANS CM and AGBRESA). The AGBRESA study collected MRI data at Baseline, 14 days into HDTBR (HDTBR-14), 52 days into HDTBR (HDTBR-52), and three days into Recovery (R+ 3) and included eight healthy adults (2 women), age = 33 ± 8 years. The SANS CM collected MRI data at Baseline, 15 days into HDTBR (HDTBR-15), 29 days into HDTBR (HDTBR-29), and 12 days into Recovery (R+12) and included twelve healthy adults (4 women), age = 34 ± 9 years. Pituitary gland height was evaluated using a sagittal, 3D T1-MPRAGE sequence obtained on a dedicated 3T Siemens Biograph MRI scanner using a 32-channel head coil. Following the reconstruction of a true orthogonal sagittal plane of the pituitary gland using a 3D multiplanar reconstruction tool (Horosproject.org), the anterior pituitary mid-gland height at the pituitary stalk level was quantified according to the methodology described by Kramer et al. . A paired t-test was used to evaluate changes from the baseline measurements. FINDINGS The mean height of the pituitary gland at baseline was 6.5 ± 1.7 mm (AGBRESA) and 5.7 ± 1.6 mm (SANS CM). From baseline measurements, the SANS CM STUDY data showed a decrease in mean pituitary height of 0.3 mm (p=.011) at HDTBR-15, 0.5 mm at HDTBR-29 (p<.001) and 0.2 mm at R+12 (p=.02). From baseline measurements, the AGBRESA data showed a decrease in mean pituitary height of 0.3 mm (p=.06) at HDTBR-14, 0.6 mm at HDTBR-52 (p<.002) and 0.2 mm at R+3 (p=.13). CONCLUSION HDTBR results in progressive loss of pituitary height, which is most severe with the longest HDTBR exposure. Early pituitary height loss was the same at HDTBR-14 (AGBRESA) and HDTBR-15 (SANS CM). Residual pituitary height loss was the same at R+12 and R+3 but only significant in the latter (SANS CM). The degree of pituitary height loss at HDTBR-52 replicates the 0.6 mm height loss found in long-duration astronauts after approximately six months of microgravity exposure (p<.01, preflight mean height=5.9 mm). The hormonal effects of pituitary height loss are unknown in astronauts and HDTBR subjects and should be investigated in future studies. Future work will examine the individual variability in the loss of pituitary gland height and whether those changes are associated with other SANS findings, such as optic disc edema.

L A Kramer↗
NASA NTRS2024

On the Use of SMAP Soil Moisture for Forecasting NDVI Over CONUS Cropland Regions

Vegetation health forecasting (NDVI as a proxy) informs decision-makers about the end of season crop yield productivity but is not well-documented. This study tests improvements in vegetation health forecasting by developing a data-driven Dynamic Agricultural Productivity Indicator ( DAPI ), which simultaneously incorporates satellite-based root zone soil moisture (RZSM) and satellite-based NDVI data. RZSM is estimated via data assimilation of satellite based SMAP SM dataset. We employ the proposed DAPI forecast across four cropland types in CONUS, including corn, cotton, soybeans, and wheat. Results demonstrate superior performance of the DAPI forecasts compared to climatology-based NDVI forecasts, with the largest improvements in water-limited regions. DAPI shows particularly good performance during hydrologic disturbances such as floods and droughts. To this end, the DAPI approach is useful in estimating future vegetation health for identifying potential food-insecure areas, predicting crop price changes, and projecting expected commodities market trends.

Manh Le↗