Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample collections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Environmental Monitoring Report, Salmon, Mississippi, Site 2019

This report presents the monitoring results for groundwater and surface water samples collected in October 2019 by the U.S. Department of Energy (DOE) Office of Legacy Management for the Salmon, Mississippi, Site. The U.S. Atomic Energy Commission (AEC), a predecessor agency to DOE, conducted a series of underground detonations in the Tatum Salt Dome beneath the Salmon site between 1964 and 1970 to study seismic signatures. Groundwater sampling at the site is conducted to monitor shallow groundwater that became contaminated during AEC use of the site, contamination within the shot cavity, and contamination in the Aquifer 5 injection well. Surface water sampling is conducted to ensure no contaminants are leaving the site.

54 ENVIRONMENTAL SCIENCES↗

Protocol for single-cell isolation and genome amplification of environmental microbial eukaryotes for genomic analysis

We describe environmental microbial eukaryotes (EMEs) sample collection, single-cell isolation, lysis, and genome amplification, followed by the rDNA amplification and OTU screening for recovery of high-quality species-specific genomes for de novo assembly. These protocols are part of our pipeline that also includes bioinformatic methods. The pipeline and its application on a wide range of phyla of different sample complexity are described in our complementary paper. In addition, this protocol describes optimized lysis, genome amplification, and OTU screening steps of the pipeline. For complete details on the use and execution of this protocol, please refer to Ciobanu et al. (2021).

59 BASIC BIOLOGICAL SCIENCES↗

Data Report: UT-GOM2-1 Lithostratigraphic Core Description Logs at Site GC 955, Holes H002 and H005

Lithostratigraphic core description provides a record of the stratigraphic variation in composition, texture, and sedimentary structure preserved in marine sediment cores. Here we present graphical lithostratigraphic core description logs for pressure cores collected during the 2017 UT GOM2-1 Expedition. The cores summarized here were those that were not retrieved under pressure, but nevertheless recovered some sufficient, intact strata that represent the host lithology across the Green Canyon (GC) 955 gas hydrate reservoir. Our results here represent visual core descriptions and include split core photos and location data for samples collected during core description.

03 NATURAL GAS↗

Long-term Accumulation, Depth Distribution, and Speciation of Silver Nanoparticles in Biosolids-Amended Soils

Biosolids, when applied to soil, can be a source of metals and metal nanoparticles. One of the metals that forms nanoparticles is silver (Ag), which is commonly used in elemental (Ag(0)) form as an engineered nanomaterial in industrial or consumer products. The objective of this study was to quantify and characterize the accumulation and transport of Ag in a natural soil that has received agronomically-recommended rates of biosolids as fertilizer for the past 23 years (1994{2017). Total Ag concentrations were measured in biosolids and soil samples collected from 0 to 10 cm between 1996 and 2017. In addition, the depth distribution of Ag in the soil down to 60-cm depth was measured in 2017. Electron microscopy, in combination with X-ray spectroscopy, and X-ray absorption spectroscopy were used to identify the elemental association and oxidation state of the Ag in the samples. The Ag concentrations in the biosolids-amended soil increased steadily from 1996 until 2007, after which the concentrations leveled off at about 1.25 mg Ag kg-1 soil. This corresponded with a decrease of Ag concentrations in the biosolids over time. The majority of the Ag (82%) was confined to the top 10 cm of the soil, small amounts (14%) were detected in 10 to 20-cm depth, and trace amounts (4%) in 30 to 40-cm depth. The Ag in the biosolids and soil was identified as Ag-containing nanoparticles with a diameter of 10 to 12 nm. Ag was associated with S suggest that these 19 nanoparticles are Ag2S. This could be corroborated in biosolids with X-ray absorption spectroscopy (XANES); however, the Ag concentrations in the soil samples were too low to allow identification with XANES. Biosolids, when applied at agronomic rates in dryland cropping systems, represent an economically viable source of crop nutrients. In our study, long-term application of biosolids did not increase the concentration of total Ag in soil above a maximum of 1.5 mg Ag kg-1, and the Ag is present in the sulfide form. This concentration is below ecotoxicity limits for Ag2S in soil.

Taylor, Stephen E.↗

SPRUCE Sphagnum Phytobiome Responses to Whole Ecosystem Warming and Elevated Atmospheric CO2 in July, 2017-2021

This dataset reports the carbon (C) and nitrogen (N) isotopic composition of Sphagnum moss tissue collected from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Tissues were collected inside the SPRUCE experimental study plot, where air and peat warming are combined in whole-ecosystem warming treatments, from 2019-2021. Additionally, rates of nitrogen fixation and methane oxidation measured for Sphagnum from 2017, 2019, and 2021. Sphagnum tissue % water content was measured at all timepoints. This dataset was used to conduct analyses within Petro et al (2023). Sphagnum C and N concentrations and 13C and 15N isotopic natural abundance were determined for three replicate Sphagnum tissue samples collected from inside the SPRUCE enclosures in July 2019-2021. Elemental and isotope analyses were conducted at the University of Georgia – Center for Applied Isotope Studies (CAIS; https://cais.uga.edu/). Plant elemental analysis was performed by the micro-Dumas method, while isotopic natural abundance was measured by isotope ratio mass spectrometry. 13C natural abundance is expressed as the per mille (‰) deviation from the Pee Dee Belemnite standard (PDB) 13C:12C ratio (δ13C), while 15N natural abundance is expressed as the ‰ deviation from the N2 atmospheric 15N:14N ratio (δ15N). Rates of nitrogen fixation and methane oxidation were measured using serum bottle incubations performed with Sphagnum collected inside the SPRUCE enclosures in July 2017, 2019, and 2021. Rates were calculated according to the amount of 15N-N2 or 13C-CH4 (methane) incorporated into the Sphagnum tissue or incubation headspace over the 48-hour intion period. In 2017, incubations were performed in growth chambers set to the temperature of the experimental plots during Sphagnum sampling. In 2019 and 2021, the incubations were performed directly inside the experimental plots. The 13C and 15N isotopic natural abundance data and rate measurements presented in this dataset provide insight into the impacts of whole-ecosystem warming and elevated atmospheric carbon dioxide (CO2) on N and C cycling within the Sphagnum phytobiome. This dataset contains two data files in comma-separate values (*.csv) format. Additional metadata are provided: two data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format. Additional datasets on NH4-N availability, porewater concentrations of CH4 and CO2, and Sphagnum groundcover within the SPRUCE experimental plots are available. These are outlined in the Related Datasets section in the user guide.

delta 13 carbon↗

Characterization of Tank 11H Samples from Tank Closure Cesium Removal (TCCR) Batch 3 - Intermediate and Final Samples

Savannah River Remediation (SRR) is currently operating the Tank Closure Cesium Removal (TCCR) process to remove 137 Cs from tank waste supernate using an ion exchange process. The TCCR unit processes dissolved salt from Tank 10H through a series of ion exchange columns containing crystalline silicotitanate (CST) and the effluent is then discharged to Tank 11H. Four interim samples pulled from Tank 11H during and just after the completion of processing of Batch 3 through the TCCR process have been analyzed for 137 Cs activity and density. The 137 Cs activity was found to decrease with each subsequent sample, which is consistent with the addition of decontaminated solution to Tank 11H. When compared to the expected composition from mixing the Tank 10H Batch 3 feed with the material already present in Tank 11H, the bulk chemical composition was as expected. A corrosion control sample collected from Tank 11H in June 2020 showed changes in the chemical composition and 137 Cs activity when compared to the composition measured at the end of Batch 2 processing. As there were no additions made to the tank during this period, these changes were attributed to leaching of the solids present in Tank 11H. Additional analyses of the 4 th interim sample are pending and will be documented in a revision to this report.

11H↗

ESS-DIVE Reporting Format for Amplicon Abundance Table

While standardized sequencing data is available in public repositories and efforts such as MIxS for common sample collection and processing metadata are well established, the lack of common bioinformatic processing metadata has hindered the ability to do large-scale metaanalyses and the potential for data re-use by non-experts such as ecosystem, watershed, or earth system modelers. To address this need for Department of Energy researchers, we have developed an amplicon reporting format which captures both sample preparation and bioinformatic processing metadata and stores processed amplicon data as a paired abundance table and sequencing file to maximize the potential for re-use of these data. To aid in the adoption of accessible and reproducible analysis workflows, this reporting format was developed in concert with amplicon functionality within the Department of Energy’s Systems Biology Knowledgebase (KBase) to ensure common data and metadata requirements and facilitate seamless transfer between these platforms.This dataset contains support documentation for the amplicon reporting format (README.md and instructions.md), templates for both bioinformatic and sequencing metadata (amplicon_bioinformatic_metadata_template_2021_10_03.csv and amplicon_sequencing_metadata_template_2021_10_03.csv), a crosswalk indicating how this reporting format relates to the current MIxS format (ESSDIVE-MIxS_crosswalk.csv), a list of available instrument terms (amplicon_seq_instrument_terms_2021_10_03.csv), a map between QIIME2 parameter settings and metadata fields (amplicon_qiime2_plugin_metadata_map.csv), a data dictionary (amplicon_CSV_dd.csv), and file-level metadata (amplicon_FLMD.csv).

54 ENVIRONMENTAL SCIENCES↗

Machine‐learning‐based construction of barrier functions and models for safe model predictive control

Abstract In this paper, we propose a control Lyapunov‐barrier function‐based model predictive control method utilizing a feed‐forward neural network specified control barrier function (CBF) and a recurrent neural network (RNN) predictive model to stabilize nonlinear processes with input constraints, and to guarantee that safety requirements are met for all times. The nonlinear system is first modeled using RNN techniques, and a CBF is characterized by constructing a feed‐forward neural network (FNN) model with unique structures and properties. The FNN model for the CBF is trained based on data samples collected from safe and unsafe operating regions, and the resulting FNN model is verified to demonstrate that the safety properties of the CBF are satisfied. Given sufficiently small bounded modeling errors for both the FNN and the RNN models, the proposed control system is able to guarantee closed‐loop stability while preventing the closed‐loop states from entering unsafe regions in state‐space under sample‐and‐hold control action implementation. We provide the theoretical analysis for bounded unsafe sets in state‐space, and demonstrate the effectiveness of the proposed control strategy using a nonlinear chemical process example with a bounded unsafe region.

Chen, Scarlett↗

Timeseries Unlabeled and Labeled Photos, Modeled Stream Elevation, and (Meta)Data of Variably Inundated Streams Across The Yakima River Basin, Washington, United States (v2)

This dataset is associated with the “River Monitoring Photos” (RMP) study and subsequent manuscript (Bao et al. 2025. Monitoring river flow status using low-cost wildlife camera and image segmentation artificial intelligence doi: 10.1016/j.envsoft.2025.106715). Game camera timeseries photos were collected to evaluate stream variable inundation via changes in width. A subset of photos was labeled for training the YOLOv8 and Mask2Former models and used to segment water surface fractions from all the game camera photos.This data package was originally published in March 2024. It was updated in October 2025 (v2) to add additional photos and files associated with the manuscript (i.e., processed data, labeled photos, and trained models). For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About.In addition to a readme, this data package also includes two file-level metadata (FLMD) files that describes each file and two data dictionaries (DD) that describe all column/row headers and variable definitions. This dataset is comprised of (1) file-level metadata; (2) data dictionary; (3) readme; (4) field metadata; and (5) folders containing game camera photos and manuscript-associated files. Each Yakima River Basin site has a folder that contains subfolders for each month photos were collected. There is also a folder for files associated with the manuscript which has subfolders for labeled data, trained models, Yakima River Basin site water surface fractions, and USGS site water surface fractions. All files are .csv, .json, .txt, .yaml, .pth, .pt, or .pdf. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗

Arctic Permafrost Thawing Enhances Sulfide Oxidation

Permafrost degradation is altering biogeochemical processes throughout the Arctic. Thaw-induced changes in organic matter transformations and mineral weathering reactions are impacting fluxes of inorganic carbon (IC) and alkalinity (ALK) in Arctic rivers. However, the net impact of these changing fluxes on the concentration of carbon dioxide in the atmosphere (pCO 2 ) is relatively unconstrained. Resolving this uncertainty is important as thaw-driven changes in the fluxes of IC and ALK could produce feedbacks in the global carbon cycle. Enhanced production of sulfuric acid through sulfide oxidation is particularly poorly quantified despite its potential to remove ALK from the ocean-atmosphere system and increase pCO 2 , producing a positive feedback leading to more warming and permafrost degradation. In this work, we quantified weathering in the Koyukuk River, a major tributary of the Yukon River draining discontinuous permafrost in central Alaska, based on water and sediment samples collected near the village of Huslia in summer 2018. Using measurements of major ion abundances and sulfate (SO 4 2- ) sulfur ( 34 S/ 32 S) and oxygen ( 18 O/ 16 O) isotope ratios, we employed the MEANDIR inversion model to quantify the relative importance of a suite of weathering processes and their net impact on pCO 2 . Calculations found that approximately 80% of SO 4 2- in mainstem samples derived from sulfide oxidation with the remainder from evaporite dissolution. Moreover, 34 S/ 32 S ratios, 13 C/ 12 C ratios of dissolved IC, and sulfur X-ray absorption spectra of mainstem, secondary channel, and floodplain pore fluid and sediment samples revealed modest degrees of microbial sulfate reduction within the floodplain. Weathering fluxes of ALK and IC result in lower values of pCO 2 over timescales shorter than carbonate compensation (~10 4 yr) and, for mainstem samples, higher values of pCO 2 over timescales longer than carbonate compensation but shorter than the residence time of marine (~10 7 yr). Furthermore, the absolute concentrations of and Mg 2+ in the Koyukuk River, as well as the ratios of SO 4 2- and Mg 2+ to other dissolved weathering products, have increased over the past 50 years. Through analogy to similar trends in the Yukon River, we interpret these changes as reflecting enhanced sulfide oxidation due to ongoing exposure of previously frozen sediment and changes in the contributions of shallow and deep flow paths to the active channel. Overall, these findings confirm that sulfide oxidation is a substantial outcome of permafrost degradation and that the sulfur cycle responds to permafrost thaw with a timescale-dependent feedback on warming.

54 ENVIRONMENTAL SCIENCES↗

SPRUCE Quantitative PCR (qPCR) of Microbial Gene Copy Numbers, 2021-2022

This dataset provides the results for quantitative polymerase chain reaction (qPCR) of peat samples collected from ambient and experimental plots in the Spruce and Peatland Responses Under Climatic and Environmental Change (SPRUCE) experiment site in June and August of 2021, and June of 2022. SPRUCE is located within the Marcell Experimental Forest in northern Minnesota, USA. The dataset includes bacterial, archaeal, fungal gene copy numbers, along with corresponding logarithmic values, at 11 depth increments of two-meter deep peat cores taken from 12 sampling sites locations inside SPRUCE plots (10 chambered and 2 ambient plots). The sampling, sample prep and analysis followed standard methods outlined in prior publications (Wilson et al. 2016; Kluber et al. 2020) except that a higher yielding Omega Bio-Tek Mag-Bind Environmental DNA 96 Kit was used for extractions and DNA was quantified using Qubit dsDNA High Sensitivity Assay Kit. qPCR subsamples of peat cores from the SPRUCE plots characterize changes in the abundance and composition of microbial communities of peat seasonally showing how composition varies under multiple levels of experimental peat warming and atmospheric CO2 concentrations. This dataset contains one data file in comma-separated values (.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma-separated values (.csv) format and a user guide in PDF (*.pdf) format. On 2026-07-07 this dataset was updated to add three columns to the data file: ‘Fungal_copy_dry’, ‘Log_fungal_copy_dry’, ‘Fungal_copy_wet’. No previously released data values were altered. Additionally, the abstract, data dictionary, and user guide were updated, and a file-level metadata file was added.

Archaea↗

Field-scale estimation of soil properties from spectral induced polarization tomography

Estimates of soil properties such as Cation Exchange Capacity (CEC), water content, grain size characteristics, and permeability are important in geotechnical engineering, water resources, and agriculture. We develop a non-intrusive approach to estimate these properties in the field using spectral induced polarization (SIP) tomography. This geophysical method provides information about the frequency dependence of the complex electrical conductivity of porous media. Using 18 soil samples collected from a Bordeaux vineyard, we first conducted a laboratory study using SIP over the frequency range 10 mHz-45 kHz. The laboratory data were used to confirm the accuracy of a recently developed dynamic Stern layer petrophysical model. The results are consistent with published values from previous works using soils. A comparison was made by comparing the field complex conductivity spectra and the experimental data at two locations where core samples were obtained. The model was then used in concert with field data to image the spatial distribution of CEC, water content, permeability, and mean grain size along a vineyard transect. For clay and sandy textures found in the field, measured and estimated CEC agree rather well (from 6 to 40% discrepancy). Furthermore, our approach provides an efficient way to estimate important soil properties in a non-invasive manner, in high resolution, and over field-relevant scales of the critical zone of the Earth.

54 ENVIRONMENTAL SCIENCES↗

SARS-CoV-2 raw wastewater surveillance from student residences on an urban university campus

The COVID-19 pandemic brought about an urgent need to monitor the community prevalence of infection and detect the presence of SARS-CoV-2. Testing individual people is the most reliable method to measure the spread of the virus in any given community, but it is also the most expensive and time-consuming. Wastewater-based epidemiology (WBE) has been used since the 1960s when scientists implemented monitoring to measure the effectiveness of the Polio vaccine. Since then, WBE has been used to monitor populations for various pathogens, drugs, and pollutants. In August 2020, the University of Tennessee-Knoxville implemented a SARS-CoV-2 surveillance program that began with raw wastewater surveillance of the student residence buildings on campus, the results of which were shared with another lab group on campus that oversaw the pooled saliva testing of students. Sample collection began at 8 am, and the final RT-qPCR results were obtained by midnight. The previous day’s results were presented to the campus administrators and the Student Health Center at 8 am the following morning. The buildings surveyed included all campus dormitories, fraternities, and sororities, 46 buildings in all representing an on-campus community of over 8,000 students. The WBE surveillance relied upon early morning “grab” samples and 24-h composite sampling. Because we only had three Hach AS950 Portable Peristaltic Sampler units, we reserved 24-h composite sampling for the dormitories with the highest population of students. Samples were pasteurized, and heavy sediment was centrifuged and filtered out, followed by a virus concentration step before RNA extraction. Each sample was tested by RT-qPCR for the presence of SARS-CoV-2, using the CDC primers for N Capsid targets N1 and N3. The subsequent pooled saliva tests from sections of each building allowed lower costs and minimized the total number of individual verification tests that needed to be analyzed by the Student Health Center. Our WBE results matched the trend of the on-campus cases reported by the student health center. The highest concentration of genomic copies detected in one sample was 5.06 × 10 7 copies/L. Raw wastewater-based epidemiology is an efficient, economical, fast, and non-invasive method to monitor a large community for a single pathogen or multiple pathogen targets.

60 APPLIED LIFE SCIENCES↗

Air, surface, and wastewater surveillance of SARS-CoV-2; a multimodal evaluation of COVID-19 detection in a built environment

Environmental surveillance of infectious organisms holds tremendous promise to reduce human-to-human transmission in indoor spaces through early detection. In this study we determined the applicability and limitations of wastewater, indoor high-touch surfaces, in-room air, and rooftop exhaust air sampling methods for detecting SARS-CoV-2 in a real world building occupied by residents recently diagnosed with COVID-19. We concurrently examined the results of three 24-hour environmental surveillance techniques, indoor surface sampling, exhaust air sampling and wastewater surveillance, to the known daily census fluctuations in a COVID-19 isolation dormitory. Additionally, we assessed the ability of aerosol samplers placed in the large volume lobby to detect SARS-CoV-2 multiple times per day. Our research reveals an increase in the number of individuals confirmed positive with COVID-19 as well as their estimated human viral load to be associated with statistically significant increases in viral loads detected in rooftop exhaust aerosol samples (p = 0.0413), wastewater samples (p = 0.0323,), and indoor high-touch surfaces (p < 0.001)). We also report that the viral load detected in lobby aerosol samples was statistically higher in samples collected during presence of occupants whose COVID-19 diagnostic tests were confirmed positive via qPCR compared to periods when the lobby was occupied by either contact-traced (suspected positive) individuals or during unoccupied periods (p = 0.0314 and <2e–16). We conclude that each daily (24h) surveillance method, rooftop exhaust air, indoor high-touch surfaces, and wastewater, provide useful detection signals for building owner/operator(s). Furthermore, we demonstrate that exhaust air sampling can provide spatially resolved signals based upon ventilation exhaust zones. Additionally, we find that indoor lobby air sampling can provide temporally resolved signals useful during short duration sampling periods (e.g., 2-4 hours) even with intermittent occupancy by occupants diagnosed with COVID-19.

60 APPLIED LIFE SCIENCES↗

Summary Report for the Analysis of the Sludge Batch 7b (Macrobatch 9) DWPF Pour Stream Glass Sample for Canister S04023

In order to comply with the Defense Waste Processing Facility (DWPF) Waste Form Compliance Plan for Sludge Batch 7b, Savannah River National Laboratory (SRNL) personnel characterized the Defense Waste Processing Facility (DWPF) pour stream (PS) glass sample collected while filling canister S04023. This report summarizes the results of the compositional analysis for reportable oxides and radionuclides and the normalized Product Consistency Test (PCT) results. The PCT responses indicate that the DWPF produced glass that is significantly more durable than the Environmental Assessment glass. Results and further details are documented in SRNL-STI-2013-00462, Revision 1 “Analysis of the DWPF Sludge Batch 7b (Macrobatch 9) Pour Stream Glass Sample.”

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Iodine Air Sampling: Installation and Preliminary Results

The F-Area wetlands are a known sink for radioiodine generated at the Savannah River Site (SRS). Wastewater containing iodine-129 ( 129 I) was discharged into the F-Area Seepage Basins for disposal, but the acidity of the wastewater mobilized some of the contaminants from the basin soil through the vadose zone and into the groundwater; ultimately creating a groundwater plume that extends towards Fourmile Branch and its associated wetland areas. Dissolved radioiodine specifically has migrated to the nearby F-Area wetlands, where it persists as a contaminant of concern. Accumulation and resurfacing of 129 I in the wetlands and nearby areas creates a potential secondary source zone where changes in biogeochemical conditions could result in the release of this sequestered 129 I to the air. Monitoring data has indicated that 129 I has a seasonal behavior at several surface water stations, with high concentrations during summertime and low concentrations during wintertime. Still, it is not known which factors control the seasonal behavior of 129 I. Further, it has been reported that 129 I contributed approximately 23% to the 2019 SRS offsite air pathway dose to the representative person for that year (SRNS, 2020), but air measurements of 129 I have never been taken in the F-Area wetlands. Because air emissions of 129 I from the wetlands have never been investigated, it is not known if this could be a potential release pathway that needs to be included in the site conceptual model. To address these unknowns, the Savannah River National Laboratory (SRNL) has an applied research task to investigate whether 129 I in the wetlands is emitted to the air and, if so, whether air concentrations exhibit seasonal variation. This report presents information about the system recently installed in the F-Area wetlands for measuring 129 I, as well as analysis results for samples collected June through August 2023. Quantification of this constituent will provide a better understanding of the contribution of airborne 129 I from the F-Area wetlands to the offsite dose and better inform ongoing and future remedial actions.

54 ENVIRONMENTAL SCIENCES↗

Toward using collective x-ray Thomson scattering to study C–H demixing and hydrogen metallization in warm dense matter conditions

The insulator–metal transition in liquid hydrogen is an important phenomenon to understand the interiors of gas giants, such as Jupiter and Saturn, as well as the physical and chemical behavior of materials at high pressures and temperatures. Here, the path toward an experimental approach is detailed based on spectrally resolved x-ray scattering, tailored to observe and characterize hydrogen metallization in dynamically compressed hydrocarbons in the regime of carbon–hydrogen phase separation. With the help of time-dependent density functional theory calculations and scattering spectra from undriven carbon samples collected at the European x-ray Free-Electron Laser Facility (EuXFEL), we demonstrate sufficient data quality for observing C–H demixing and investigating the presence of liquid metallic hydrogen in future experiments using the reprated drive laser systems at EuXFEL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inclusive and differential cross-sections for dilepton $t\overline{t}$ production measured in $\sqrt{s}$ = 13 TeV pp collisions with the ATLAS detector

Differential and double-differential distributions of kinematic variables of leptons from decays of top-quark pairs ($t\bar{t}$) are measured using the full LHC Run 2 data sample collected with the ATLAS detector. The data were collected at a pp collision energy of $\sqrt{s}$ = 13 TeV and correspond to an integrated luminosity of 140 fb –1 . The measurements use events containing an oppositely charged e μ pair and b-tagged jets. The results are compared with predictions from several Monte Carlo generators. While no prediction is found to be consistent with all distributions, a better agreement with measurements of the lepton p T distributions is obtained by reweighting the $t\bar{t}$ sample so as to reproduce the top-quark p T distribution from an NNLO calculation. The inclusive top-quark pair production cross-section is measured as well, both in a fiducial region and in the full phase-space. The total inclusive cross-section is found to be $σ_{t\bar{t}}=$ 829 ± 1 (stat) ± 13 (syst) ± 8 (lumi) ± 2 (beam) pb, where the uncertainties are due to statistics, systematic effects, the integrated luminosity and the beam energy. This is in excellent agreement with the theoretical expectation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗