SEARCH · Search NASA

Results for “separation principle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1927

Removing Boundary Layer by Suction

Through the utilization of the "Magnus effect" on the Flettner rotor ship, the attention of the public has been directed to the underlying physical principle. It has been found that the Prandtl boundary-layer theory furnishes a satisfactory explanation of the observed phenomena. The present article deals with the prevention of this separation or detachment of the flow by drawing the boundary layer into the inside of a body through a slot or slots in its surface.

AERODYNAMICS↗

NASA NTRS2007

Probing the Galactic Binary Black Hole Spin with Photon Timing

It is generally considered that the X-ray emission in AGN and Galactic Black Hole Candidates is produced by flares above the surface of a geometrically thin optically thick accretion disk, which extends down to the Innermost Stable Circular Orbit (ISCO) of the black hole. We consider the influence of the black hole geometry on the light curves of these flares. To this end we follow a large number of photon orbits emitted impulsively in a locally isotropic fashion, at any phase of the disk orbit and examine their arrival times at infinity by an observer near the plane of the disk. We find out that the presence of the black hole spin induces a certain delay in the photon arrivals, as prograde photon orbits reach the observer on shorter (on the average) times than the retrograde ones. We form a histogram of the differences in photon time arrivals and we find that it exhibits several well defined peaks depending on the flare position and the black hole spin separated by $\Delta t \simeq 30 M$, where M is the black hole mass. The peaks disappear as the spin parameter goes to zero, implying that one could in principle measure the value of the black hole spin with timing measurements of sufficiently high signal to noise ratio.

Kazanas, Demosthenes↗

NASA NTRS2007

Probing the Galactic Binary Black Hole Spin with Photon Timing

It is generally considered that the X-ray emission in AGN and Galactic Black Hole Candidates is produced by flares above the surface of a geometrically thin optically thick accretion disk, which extends down to the Innermost Stable Circular Orbit (ISCO) of the black hole. We consider the influence of the black hole geometry on the light curves of these flares. To this end we follow a large number of photon orbits emitted impulsively in a locally isotropic fashion, at any phase of the disk orbit and examine their arrival times at infinity by an observer near the plane of the disk. We find out that the presence of the black hole spin induces a certain delay in the photon arrivals, as prograde photon orbits reach the observer on shorter (on the average) times than the retrograde ones. We form a histogram of the differences in photon time arrivals and we find that it exhibits several well defined peaks depending on the flare position and the black hole spin separated by $\Delta t\slmeq 30 M$, where M is the black hole mass. The peaks disappear as the spin parameter goes to zero, implying that one could in principle measure the value of the black hole spin with timing measurements of sufficiently high signal to noise ratio.

Kazanas, Demos↗

NASA NTRS2011

Towards a State Based Control Architecture for Large Telescopes: Laying a Foundation at the VLT

Large telescopes are characterized by a high level of distribution of control-related tasks and will feature diverse data flow patterns and large ranges of sampling frequencies; there will often be no single, fixed server-client relationship between the control tasks. the architecture is also challenged by the task of integrating heterogeneous subsystems which will be delivered by multiple different contractors. Due to the high number of distributed components, the control system needs to effectively detect errors and faults, impede their propagation, and accurately mitigate them in the shortest time possible, enabling the service to be restored. The presented Data-Driven Architecture is based on a decentralized approach with an end-to-end integration of disparate, independently developed software components. These components employ a high-performance standards-based communication middle-ware infrastructure, based on the Data Distribution Service. A set of rules and principles, based on JPL's State Analysis method and architecture, are use to constrain component-to component interactions, where the Control System and System Under Control are clearly separated. State Analysis provide a model-based process for capturing system and software requirements and design, greatly reducing the gap between the requirements on software specified by systems engineers and the implementation by software engineers. The method and architecture has been field tested at the Very Large Telescope, where it has been integrated into an operational system.

European Extremely Large Telescope (E-ELT)↗

NASA NTRS1970

Combining micro dry column chromatography and mass spectrometry

Dry column chromatography principles applied in microscale produce technique to minimize time in preparing and analyzing colorless constituents of soluble mixtures. Glass pipette microcolumns filled with finely sieved adsorbents permit capillary attraction and separation in 3 to 15 minutes. Technique is adaptable to gas chromatography.

Bauman, A. J.↗

NASA NTRS1975

The seven ages of a planet

On the basis of almost universally held assumptions concerning the formation of the planets and the isolation of the solar system from outside influences it follows rather plausibly that all terrestrial planets pass in principle through seven stages. The processes involved include the solidification of grains from gas in the condensation stage, planetesimal interactions, and formation processes. Vigorous convection processes lead to the gravitational separation of iron and the outgassing of oceans. Other stages are related to plate tectonics and terminal volcanism. The ultimate stage of quiescence is characterized by a thick lithosphere and no volcanism.

Kaula, W. M.↗

NASA NTRS1976

On the status of V/STOL flight

Basic principles relating to the accomplishment of V/STOL flight are reviewed as they pertain to current prototype developments. Particular consideration is given to the jet flap, flow augmentation and circulation control separately and in combination. Configurations as the augmentor wing, upper-surface blown flaps, externally blown flaps and the circulation-controlled rotor are also examined.

Mccormick, B. W.↗

DOE OSTI2025

Gluon unpolarized, polarized, and transversity GPDs from lattice QCD: Lorentz-covariant parametrization

We identify the matrix elements necessary to determine the leading-twist gluon generalized parton distributions (GPDs) H g , E g , H ˜ g , E ˜ g , H g T , E g T , H ˜ g T , E ˜ g T in lattice QCD calculations. We present a method to achieve a Lorentz-covariant parameterization of the matrix elements in terms of a linearly independent basis of tensor structures. This parameterization is crucial for projecting lattice QCD matrix elements onto light cone distributions. For the first time, we determine the corresponding components that project onto the linear combinations of invariant amplitudes, which reduce to the different gluon GPDs in the light cone limit and enable their separation in a lattice QCD calculation for spin-0 and spin- 1 2 hadrons. Hence, this work lays the foundation for the numerical determination of the gluon GPDs from first-principle lattice QCD calculations, directly advancing our understanding of the mass and spin structures and mechanical properties of the nucleon, as well as the physics underlying deeply virtual Compton scattering and deeply virtual meson production in a range of experimental processes. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Synthesis and characterization of the novel breathing pyrochlore compound Ba 3 ⁢Tm 2⁢ Zn 5⁢ O 11

In this study, a novel material from the rare-earth based breathing pyrochlore family, Ba 3 ⁢Tm 2 ⁢Zn 5 ⁢O 11 , was successfully synthesized. Powder x-ray diffraction and high-resolution powder neutron diffraction confirmed phase purity and the $F\bar4$3⁢𝑚 breathing pyrochlore crystal structure, while thermogravimetric analysis revealed incongruent melting behavior compared to its counterpart, Ba 3 ⁢Yb 2⁢ Zn 5⁢ O 11 . High-quality single crystals of Ba 3 ⁢Tm 2 ⁢Zn 5 ⁢O 11 were grown using the traveling solvent floating zone technique and assessed using Laue x-ray diffraction and single crystal x-ray diffraction. Further, thermodynamic characterization indicated paramagnetic behavior down to 0.05 K, and inelastic neutron scattering measurements identified distinct dispersionless crystal electric field energy bands, with the fitted crystal electric field model predicting a single-ion singlet ground state and an energy gap of ∼9 meV separating it from the first excited (singlet) state. Additional low-energy excitation studies on single crystals revealed dispersionless bands at 0.8 and 1 meV. Computed phonon dispersions from first-principles calculations ruled out phonons as the origin of these modes, further illustrating the puzzling and unique properties of Ba 3 ⁢Tm⁢ 2 Zn 5 ⁢O 11 .

36 MATERIALS SCIENCE↗

NASA NTRS1984

A spectral element method for fluid dynamics - Laminar flow in a channel expansion

A spectral element method that combines the generality of the finite element method with the accuracy of spectral techniques is proposed for the numerical solution of the incompressible Navier-Stokes equations. In the spectral element discretization, the computational domain is broken into a series of elements, and the velocity in each element is represented as a high-order Lagrangian interpolant through Chebyshev collocation points. The hyperbolic piece of the governing equations is then treated with an explicit collocation scheme, while the pressure and viscous contributions are treated implicitly with a projection operator derived from a variational principle. The implementation of the technique is demonstrated on a one-dimensional inflow-outflow advection-diffusion equation, and the method is then applied to laminar two-dimensional (separated) flow in a channel expansion. Comparisons are made with experiment and previous numerical work.

Patera, A. T.↗

NASA NTRS2004

Bubble Eliminator Based on Centrifugal Flow

The fluid bubble eliminator (FBE) is a device that removes gas bubbles from a flowing liquid. The FBE contains no moving parts and does not require any power input beyond that needed to pump the liquid. In the FBE, the buoyant force for separating the gas from the liquid is provided by a radial pressure gradient associated with a centrifugal flow of the liquid and any entrained bubbles. A device based on a similar principle is described in Centrifugal Adsorption Cartridge System (MSC- 22863), which appears on page 48 of this issue. The FBE was originally intended for use in filtering bubbles out of a liquid flowing relatively slowly in a bioreactor system in microgravity. Versions that operate in normal Earth gravitation at greater flow speeds may also be feasible. The FBE (see figure) is constructed as a cartridge that includes two concentric cylinders with flanges at the ends. The outer cylinder is an impermeable housing; the inner cylinder comprises a gas-permeable, liquid-impermeable membrane covering a perforated inner tube. Multiple spiral disks that collectively constitute a spiral ramp are mounted in the space between the inner and outer cylinders. The liquid enters the FBE through an end flange, flows in the annular space between the cylinders, and leaves through the opposite end flange. The spiral disks channel the liquid into a spiral flow, the circumferential component of which gives rise to the desired centrifugal effect. The resulting radial pressure gradient forces the bubbles radially inward; that is, toward the inner cylinder. At the inner cylinder, the gas-permeable, liquid-impermeable membrane allows the bubbles to enter the perforated inner tube while keeping the liquid in the space between the inner and outer cylinders. The gas thus collected can be vented via an endflange connection to the inner tube. The centripetal acceleration (and thus the radial pressure gradient) is approximately proportional to the square of the flow speed and approximately inversely proportional to an effective radius of the annular space. For a given FBE geometry, one could increase the maximum rate at which gas could be removed by increasing the rate of flow to obtain more centripetal acceleration. In experiments and calculations oriented toward the original microgravitational application, centripetal accelerations between 0.001 and 0.012 g [where g normal Earth gravitation (.9.8 m/s2)] were considered. For operation in normal Earth gravitation, it would likely be necessary to choose the FBE geometry and the rate of flow to obtain centripetal acceleration comparable to or greater than g.

Gonda, Steve R.↗

DOE OSTI2026

Constraining the Aerosol Effects on Deep Convective Clouds by Considering the Coupling Between Clouds and the Planetary Boundary Layer

Several mechanisms have been proposed for the aerosol invigoration effect. Although their principles are well established, their actual magnitudes and roles in cloud development remain uncertain and debatable. This uncertainty partly stems from observational-based studies, in which it has been challenging to separate the co-variability between aerosols and meteorology. Addressing this problem requires large data samples. To this end, this study employs the Atmospheric Radiation Measurement data set expanding to 16 years (some up to 17 years, compared to 10 years in previous work) in the U.S. Southern Great Plains. It also conducts a more careful and rigorous analysis to isolate the influences of convective available potential energy (CAPE) and synoptic patterns to address a previously raised concern. We incorporated a new key process affecting aerosol-cloud interaction: cloud-surface coupling. The state/degree of the coupling relationship turns out to play an important role in the invigoration effect. Our analysis reinforces earlier findings of a robust positive relationship between cloud thickness and aerosol loading across CAPE percentiles—but only under cloud-surface coupled conditions. The increase in cloud thickness with aerosol loading is most pronounced in coupled clouds with high CAPE and bases below 1 km. Coupled clouds with bases below 1 km thicken between 1 and 4 km, depending on the CAPE percentile. Decoupled clouds show no such systematic changes. Synoptic patterns also lead to different strengths of the invigoration effect. Clean and polluted air masses are predominantly associated with northerly and southerly winds, respectively, with a stronger invigoration effect in cleaner air masses.

Geosciences↗

DOE OSTI2026

Integrated System Planning: Emerging Software Requirements in the Power Industry

Power system planning software remains fragmented across organizational boundaries, with specialized tools for capacity expansion, production cost modeling, power flow, and dynamic analysis operating on incompatible data models and assumptions. This article argues that the fragmentation is not merely a technical problem but a predictable consequence of Conway's law: software architectures mirror the departmental structures within which they are developed. Regulatory milestones like Federal Energy Regulatory Commission (FERC) Order 888 formalized these divisions, but the roots trace back to the distinct engineering disciplines-mechanical, chemical, and electrical-that staffed generation and transmission planning departments in vertically integrated utilities. As the industry moves toward integrated system planning (ISP) that coordinates generation, transmission, and distribution investment decisions, the software ecosystem must evolve accordingly. We identify five categories of software requirements to enable this transition: coherent data inputs decoupled from individual applications, unified and extensible data schemas, modular component representations that support multiple abstraction levels, lifecycle management of planning datasets, and well-defined application programming interface (API) contracts that separate data exchange from algorithmic control. We examine how these requirements interact with three common workflow patterns-serial gate clearing, sequential multiapplication, and convergence oriented-and discuss the interface design principles each demands. We then outline a vision for platform-based planning architectures where specialized analytical services compose through standardized interfaces and where artificial intelligence (AI)/machine learning (ML) tools augment decision support within a disciplined software infrastructure. The practices proposed here offer a path from today's siloed tool collections toward collaborative planning ecosystems capable of handling the complexity of modern power system transformation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2024

The Scientific Case for Concurrent Neutron and X-ray Scattering and Spectroscopy

The interrogation of materials with X-rays or neutrons to determine the structure, energetics, and dynamics of materials is fundamental to advancing materials' physical and chemical science and developing innovative material technologies. A transcending challenge in developing novel materials is that progress hinges on understanding the structure and dynamics across multiple time and length scales in complex materials that feature multiple components, interfaces, and compositions. Despite the ever-growing demands on materials’ characterization, existing approaches are almost exclusively based on isolated X-ray or neutron scattering, i.e., an approach commensurate with the more narrowly defined needs of fifty years ago. A three-day workshop sponsored by the U.S. National Science Foundation (NSF) analyzed the demand for concurrent neutron and X-ray (NeX) experiments. It was held at the Spring Hill Suites, San Jose, California, from June 2 to 4, 2022. In this workshop, 70 national and international experts ascertained the crucial need to establish NeX capabilities to advance the science of complex materials and systems in the US. Here, we illustrate the need for NeX scattering and spectroscopy experiments by showcasing examples that span areas as diverse as biomaterials, energy science, soft matter, and nanomaterials. To provide NeX capability will require new instrumentation that enables concurrent experiments. Affected areas include chemistry, soft matter, quantum materials, pure and applied chemistry, bioscience, geoscience, and applied materials. NeX benefits research outcomes due to the complementarity of the two techniques, which is essential for better model refinement. While joint refinement of data from separate neutron and X-ray experiments is critical to avoid ambiguities, especially in multiphase-multicomponent materials, concurrent experiments overcome scientific and technical barriers associated with single measurements, separated by location and, thus, time. Among all the examples, these factors introduce uncertainties in the results that complicate data analysis. [1,2] [3] While models are strongly sample-dependent, the principles of joint refinement are generally applicable to these disciplines, including the development of advanced parameterization, modeling, and analysis techniques that also consider the temporal and spatial resolutions of the two methods, leading to unambiguous data interpretation. Solutions for technical barriers must be found to realize NeX experiments, including developing robust sample environments that meet the optical requirements of neutrons and X-rays.

36 MATERIALS SCIENCE↗

NASA NTRS1976

Development of lightning current detector

A lightning current detector to record the maximum current amplitude of a lightning strike to the 150 meter weather tower at KSC was developed. The principle of operation of the detector is discussed, materials chosen to build the detector are described, and calibration tests performed on the detector are given. Field results of the detectors from two separate lightning strikes to the tower are included.

Livermore, S.↗

NASA NTRS1986

Evidence for structural stacking and repetition in the greenstones of the Kalgoorlie district, western Australia

Most previous stratigraphic interpretations of the southern part of the Norseman-Wiluna Greenstone Belt have proposed polycyclic sequences. These invoked two and sometimes three successive suites of mafic and/or ultimafic volcanics and intrusives separated by felsic volcanics and immature clastic sediments, however no distinctive lithological differences were reported between successive mafic-ultramaic sequences. When interpretations of the area further to the north are integrated, a total of four separate major mafic-ultramafic uites emerges for a large part of the Norseman-Wiluna Belt. Although the author does not intent to imply that all polycyclic stratigraphies are wrong in principle such a situation seems suspiciously over-complex and stimulates the need to look critically at the individual areas where the stratigraphies have seen erected. For the Kalgoorlie area in the south, some of the schemes have already provoked scepticism and a simpler model consisting of one cycle subject to structural repetition has been evolved by workers in the Geological Survey of Western Australia for part of this area. The latter drew attention to the carbon copy similarity between the elements of some polycyclic stratigraphies. Much more regionally extensive integrated structural and stratigraphic data is still required to evaluate the relationship between structure and stratigraphy more fully, an objective substantially limited by poor outcrop and deep weathering, but with due effort, far from unattainable.

Martyn, J. E.↗

NASA NTRS2001

A Cool Tool for Deicing Planes

Nicknamed the "ice zapper," the Electro Expulsive Separation System (EESS) is an aircraft ice removal system that "pulverizes ice and removes layers of ice as thin as frost or as thick as an inch of glaze," according to the principle inventor of the technology. Patented by NASA's Ames Research Center, the EESS consists of layers of conductors encased in materials that are bonded directly to the airframe structure. When ice accumulates on the aircraft, an electric current is sent through the conductors, causing them to pulse. Even though the conductors move less than a twenty-thousandth of an inch in just a millisecond, the movement is sufficient to pulverize the ice. It is this highly accelerated motion that shatters the ice into particles the size of table salt; too small to be harmful to the aircraft. When compared with other systems in use, such as thermal deicers and pneumatic boots, the ice zapper does very well. Thermal deicers are fairly common, although they use an enormous amount of energy and present the possibility of ice refreezing. Pneumatic boots are not always effective because they require an inflation device that is unable to work until a quarter inch of ice has accumulated. With both systems, the ice that is loosened may still be large enough to cause problems for the plane once dislodged.

Source record↗

NASA NTRS2022

NASA's Responsible AI Plan

Artificial Intelligence (AI) is an integral part of today’s process of conducting science and technology development. At NASA, AI has become an integral and important tool for researchers, engineers, data scientists, and technologists in pursuing the ground-breaking discoveries that we are known for, including the command and controlling of our spacecraft and other supporting infrastructures. Consequently, research and engineering efforts incorporating AI have permeated almost every area of our work. It is contributing to NASA’s drive toward the future, not just of space science, but for society here at home. We are dedicated to continuing the use of AI in a safe and fully transparent approach so that the public can have high confidence in the outcomes and benefits. We believe that the plan outlined here will be responsive and contribute to the call for openness across the federal government. NASA is committed to responsible use of AI in all of its activities and in all phases of development and deployment of its space and terrestrial programs missions. NASA does not deliberately focus on “AI Research” as a separate field (we have no single “AI office” or “AI program”), rather NASA uses AI to build tools for its programs. This plan, being put forward, adheres to the Responsible AI (RAI) principles set and laid down by the White House in its Presidential Executive Order 13960. Our research, engineering and technical communities have been made aware of these guidelines and we are committed to an on-going process of educating and monitoring its implementation to ensure adherence to those principles. The vast majority of NASA’s use cases, which number almost 75 today, are geared toward analyzing the petabytes of data that NASA collects from its fleet of spacecraft across all disciplines, in human space exploration, and in aeronautics, etc.

Artificial Intelligence↗