Evaluating HPC Networks via Simulation of Parallel Workloads
Abstract not provided
97 MATHEMATICS AND COMPUTING↗
SEARCH · Search NASA
Results for “simulation evaluation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evaluation of Cloud Fraction Simulated by Seven SCMs against the ARM Observations at the SGP Site
N/A
54 ENVIRONMENTAL SCIENCES↗
Evaluating Large-Eddy Simulations of Boundary-Layer Cloud Response to Climate Change using MAGIC Observations
Over the cool waters off California, a persistent and extensive deck of low-lying clouds forms atop a shallow, turbulent layer of moist air extending 500-2000 meters above the ocean, above which the air is much warmer and drier. Its west edge varies with weather and season and is typically half way to Hawaii. This cloud deck and similar cloud decks elsewhere reflect sunlight back to space, cooling the underlying ocean and indeed the entire planet. They must be accurately represented by a climate model to correctly simulate our current climate or future global warming. Most climate models suggest these cloud decks will thin and break up in a warmer CO 2 -enriched climate, so extra sunlight would reach the ocean surface and amplify warming worldwide. But these models have difficulty accurately simulating the cloud thickness and extent because the turbulent cloud-forming air currents are much too small to be simulated by their coarse computational grid. In 2012-2013, the DOE Atmospheric Radiation Measurement MAGIC program instrumented a container ship transiting between California and Hawaii to observe clouds and rain, small particles (aerosols), and weather conditions. Data were obtained from 20 4-6 day cruises in each direction. This study tested whether a sophisticated ‘large-eddy simulation’ (LES) of the turbulent air motions that create the clouds in this region accurately predicts the variations in cloud properties seen across the different cruises. If so, that model is more believable for predicting cloud changes in this region in a future warmer climate. Our LES used a numerical mesh over a 6.4x6.4 km region with 50 m horizontal and 5 m vertical grid spacing to simulate the cloud-forming eddies and the sharp overlying transition between moist and dry air. To better compare with MAGIC observations, we configured our model to simulate a region that moved along with the ship. We used a weather forecast model to specify effects of the large-scale air flow. We compared our results with balloon ascents, a radar and other instruments pointed upward at the clouds, measurements of downward sunlight and infrared radiation, aerosols, and weather variables for all suitable cruise periods. Our LES was remarkably skillful in predicting the cloudiness variations measured by the ship. MAGIC also sampled mesoscale cells, regions of cloud thickening and thinning over distances of 10-50 km. An LES run over a larger region 100 km on a side shows these cells form spontaneously, enhanced by strong radiative heat loss at the cloud tops.
54 ENVIRONMENTAL SCIENCES↗
Needs and Development of the ENDF α-particle Sub-library: Measurements, Evaluation, Modeling, Format, and Simulation [Slides]
Abstract not provided.
07 ISOTOPE AND RADIATION SOURCES↗
A Simulation Test Bed for Evaluating Data Analytic Predictors of Disinformation Flow.
Abstract not provided.
Lakkaraju, Kiran↗
Implementation of a Three-Dimensional Planetary Boundary Layer Parameterization in a Coupled Modeling System and Evaluation of "Gray Zone" Simulations of a Wind-Wave Event Off the US California Coast Using Observations
A three-dimensional (3D) planetary boundary layer (PBL) parameterization was added to the Coupled Ocean Atmosphere Wave Sediment Transport (COAWST) model and the first coupled atmosphere/wave "gray zone" simulations were carried out using the 3D PBL parameterization. A case study of a significant wind-wave event from 4-8 November 2020 off the US west coast was examined, with a focus on the impacts of the event within an approximate 280x280 km central California coastal region covering the Bureau of Ocean Energy Management Morro Bay wind energy lease area. Simulations with both one-dimensional (1D; Yonsei University) and 3D PBL parameterizations were examined in this nest with ..delta..x=400 m. Two-way coupling was active, with near-surface winds feeding back to the wave model and bulk wave statistics feeding back to the atmospheric model. Both simulations compared favorably with buoy observations in capturing the timing and magnitude of wind speed, temperature, dewpoint, and significant wave height, as the front associated with the maritime weather system moved southward across coastal California. However, wind speed errors over land were larger. Time series of the vertical profile of winds below z=250 m from the simulations compared favorably with observations from the US Dept. of Energy Morro Bay Doppler lidar buoy. Differences between the coupled 1D and 3D PBL simulations were minor. The most notable difference was that the simulation using the 3D PBL parameterization had approximately 10 % weaker winds at the peak of the event causing 10 % lower significant wave heights. This difference was shown to be mostly due to differences in the vertical mixing treatment between the parameterizations, in particular the nonlocal downward mixing of higher momentum air in the 1D Yonsei University parameterization in convective conditions. Overall, this work demonstrates that the 3D PBL parameterization can be used in a coupled atmosphere/wave modeling framework with similar behaviors as traditional PBL parameterizations that do not provide horizontal turbulent variances and fluxes.
16 TIDAL AND WAVE POWER↗
Modelling and Simulation for Design and Evaluation of Physical Protection Systems.
Abstract not provided.
Parks, Mancel Jordan↗
Evaluating Symmetry in 3-dimensional Simulation Data
The increasing use of three-dimensional simulations has led to an increased need for effective verification and validation, or V&V. Unfortunately, the high computational cost associated with three-dimensional simulations makes many standard V&V techniques cost-prohibitive. Given these circumstances, we must pay close attention to V&V metrics that can be evaluated using only a single simulation. One of the simplest of these metrics is the evaluation of physical symmetries. This report details a method of computing the deviation from symmetry in a three-dimensional dataset with an arbitrarily distributed mesh. Examples are presented for spherical and axisymmetric systems using the Paraview post-processing analysis workflow.
97 MATHEMATICS AND COMPUTING↗
Synchronverter-based Control of Multi-Port Autonomous Reconfigurable Solar Plants (MARS)
Control of integrated photovoltaic (PV) plants with energy storage systems (ESSs) has become an important research and development topic in recent times. In this context, a Multi-port Autonomous Reconfigurable Solar (MARS) plant that integrates PV and ESS to alternating current transmission grid and high-voltage direct current (HVdc) link is studied in this paper. With penetration of power electronic based resources in the grid, the grid’s capability to recover from frequency or voltage disturbances are reduced. Therefore, one of the vital objectives of any new grid integrated power electronic resource is to provide advanced control functions like voltage and frequency support to the grid during disturbances. In this research work, a detailed implementation of a synchronverter-based control algorithm of MARS is presented. The proposed control algorithm and the MARS control architecture are evaluated through simulations on PSCAD/EMTDC simulation platform to showcase the performance in different operating conditions. In addition, they are evaluated in Opal-RT offline simulation models which can also be used to perform control-hardware-in-the-loop (cHIL) tests.
Marthi, Phani Ratna Vanamali↗
Detection of the pairwise kinematic Sunyaev-Zel'dovich effect with BOSS DR11 and the Atacama Cosmology Telescope
Here, we present a new measurement of the kinematic Sunyaev-Zel'dovich effect using data from the Atacama Cosmology Telescope (ACT) and the Baryon Oscillation Spectroscopic Survey (BOSS). Using 600 square degrees of overlapping sky area, we evaluate the mean pairwise baryon momentum associated with the positions of 50,000 bright galaxies in the BOSS DR11 Large Scale Structure catalog. A non-zero signal arises from the large-scale motions of halos containing the sample galaxies. The data fits an analytical signal model well, with the optical depth to microwave photon scattering as a free parameter determining the overall signal amplitude. We estimate the covariance matrix of the mean pairwise momentum as a function of galaxy separation, using microwave sky simulations, jackknife evaluation, and bootstrap estimates. The most conservative simulation-based errors give signal-to-noise estimates between 3.6 and 4.1 for varying galaxy luminosity cuts. We discuss how the other error determinations can lead to higher signal-to-noise values, and consider the impact of several possible systematic errors. Estimates of the optical depth from the average thermal Sunyaev-Zel'dovich signal at the sample galaxy positions are broadly consistent with those obtained from the mean pairwise momentum signal.
79 ASTRONOMY AND ASTROPHYSICS↗
Toward integrating high-fidelity CFD approaches in the thermal-hydraulic analysis of turbulent dry cask systems
Nuclear power plants have been supplying resilient and reliable electricity for decades, contributing to energy independence of the U.S.. However, nuclear waste management remains one of the most significant challenges in the industry. The safety of dry cask storage systems relies heavily on their thermal-hydraulic performance. Computational Fluid Dynamics (CFD) simulations are often used to demonstrate this performance and ensure that the system design meets safety standards. This study presents reduced numerical models for various types of dry cask systems. These numerical models can produce efficient and fast results based on the employed modeling strategies. Additionally, the study uses a novel approach to high-fidelity simulations to evaluate modeling assumptions in dry cask modeling. Large Eddy Simulations (LES) are used for this purpose, particularly in regions where fluid velocity is relatively high and the turbulence characteristics become important. Furthermore, the results of these high-fidelity simulations will enhance the interpretation of outcomes produced from a lower-fidelity CFD model.
CFD↗
Metal additive manufacturing simulation across length, time, and computing scales
Metal additive manufacturing (AM) offers a unique opportunity for production of advanced materials and complex geometries. However, variability in microstructure and properties challenges conventional approaches to design, process optimization, qualification, and materials selection. Modeling and simulation can improve understanding of AM processing and materials, but also poses major challenges for existing computational methods. Simultaneously, modern scientific computing hardware has become increasingly complex, most notably with the adoption of hybrid architectures such as Graphical Processing Units (GPUs). If appropriately utilized, emerging computational capabilities provide an opportunity to reveal new insight into AM processing and the resulting material structure and properties. In this review we describe the computational AM landscape, identify critical gaps, and highlight opportunities to impact the development and application of AM. First, the requirements and challenges of representative AM problem statements will be defined. Here, these problems range from scientific studies to industrial applications and are designed to capture the breadth of challenges facing the AM community. Next, the current state of AM modeling and simulation is evaluated, broken down by enabling hardware and software, process simulation, microstructure simulation, and property simulation. Each section describes the diversity of simulation approaches and associated trade-offs in physical fidelity and computational expense. Each area is then assessed based on their suitability and readiness for current and developing computational architectures. Lastly, the greatest opportunities for future research and application are highlighted, including gaps in modeling capabilities, opportunities for near-term application, and key scientific challenges.
additive manufacturing↗
Towards a Techno-Economic Analysis of PCM Integrated Hybrid HVAC Systems
Thermal end uses dominate building energy consumption and are a major driver of peak demand. As heating is electrified, peak electrical power required will surge, prompting a need for innovative HVAC system designs and controls.These designs must incorporate novel technologies at the component level and new integration techniques at the system level. One such possibility involves the addition of thermal energy storage (TES) in heating and cooling equipment using a phase change material (PCM) heat exchanger. Here, thermal energy storage via phase change can be used to shift the HVAC system loads to times of lower electricity cost, reduced carbon intensity, and greater energy efficiency. Most of the current utilization of PCM in buildings involves passive components. By actively controlling when heat is stored and released from PCM, we can optimize the building HVAC system to cost-effectively meet consumer needs with the flexibility to draw on renewable energy resources when they are abundant and available. While this combination of technologies is promising in theory, simulation-based evaluation of a prototype can be difficult due to the modeling requirements at the component level and the large number of possible configurations and operating modes at the system level. To conduct this evaluation, we use the Modelica language for modeling and simulation because it enables users to represent the important physics of the problem, interchange and rearrange components in an efficient manner, and implement a range of control configurations. In this work, we considered three case studies: a portable building, a large commercial retail store, and a multifamily residential apartment unit. Each of these employs a different system design, ranging from a single package vertical unit incorporating PCM to a central plant with independent heat pump, evaporative cooling, and thermal energy storage components. This paper describes the technologies in question, presents modeling at the component and system levels, and demonstrates building energy and demand charge cost savings with local time-of-use tariffs in a hot-dry climate.
Helmns, Dre↗
Production Through Simulation: Using Simulation Technologies to Create and Evaluate Nuclear Fuel Fabrication Facility Designs
This project explores how physics-based and discrete-event simulation technologies can be jointly employed to model a suite of nuclear fuel fabrication facility designs with variable radiological environments, optimize their design to lower operational costs subject to a set of design constraints, and evaluate their performance. Initially, three variants of U-20Pu-10Zr metallic nuclear fuel in three specific geometric configurations are modeled and studied across more than 50 physics simulations in nuclear physics software packages SCALE and Monte Carlo N-Particle Transport (MCNP6.2). From these tests, values for effective dose rate and criticality are recorded for each of the nine alloy-geometry configurations. These values are then incorporated into discrete-event models of fuel fabrication in the simulation program ExtendSim Pro 10 as process attributes. This allows one to track the dose to facility personnel as fuel is fabricated, dually enabling us to evaluate the safety of a given facility design in terms of absorbed dose per worker per year and to craft operational guidelines that adhere to federal and local safety regulations.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
EVALUATION OF HOT CHANNEL FACTOR FOR SODIUM-COOLED FAST REACTORS WITH MULTI-PHYSICS TOOLKIT
The evaluation of hot channel factor (HCF) is of great significance to the quantification of safety margins for reactor designs. In this paper, HCFs for a sodium-cooled fast reactor (SFR) are evaluated with the Simulation-based High-efficiency Advanced Reactor Prototyping (SHARP) toolkit, which is developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign of DOE for multi-physics reactor performance and safety simulations. The high-fidelity neutronics and thermal hydraulics solvers PROTEUS and Nek5000 in the SHARP toolkit are coupled to perform the multi-physics simulations for HCF evaluation. The HCFs induced by cladding manufacturing tolerance, fissile content mal-distribution, wire orientation and uncertainties on the cladding, coolant, and fuel properties are evaluated for a reference core SFR design (AFR-100). The HCFs calculated with the SHARP toolkit are compared to legacy HCFs for similar reactor types. The comparison demonstrates the reduction or elimination of modeling uncertainties in the calculation of HCFs using high fidelity advanced modeling and simulation tools without the need of expensive experiments. Moreover, the reduction of the uncertainties on HCFs evaluation allows an increase in nominal parameters and safety margin, which in turn improves the economic competitiveness of the SFR.
Hot channel factor (HCF)↗
Performance Evaluation of an Intelligent Sensor Platform for Radiation Monitoring Applications
Accurate, rugged, and reliable radiation detection systems are important for area and environmental monitoring applications. The desire for spectroscopic capability has increased in monitoring aspects of the nuclear fuel cycle to provide fast characterization of the radiation profile of a situation, such as the planned or unplanned release of material. The reduction or elimination of having to conduct sampling for laboratory analysis can result in significant cost savings for an industry, government agency, or regulatory body. A new system, comprised of a NaI:Tl scintillator and a G-M tube, has been designed and tested, taking into account the following end-user requirements: ease-of-use, capability to network and supervise multiple units, compact form factor, low power consumption, versatility, and stability. The detector sizes were selected to accommodate a dose rate up to 1 Sv/hr. Several algorithms and analysis routines have been developed to incorporate these key needs without sacrificing on accuracy, dynamic range, nuclide identification, and sensitivity. This presentation will introduce the major hardware and software components of the platform, as well as the user interface and data analysis workflow. Key features of the hardware include an environmentally robust housing, low power signal processing electronics, patented LED-based gain stabilization, and an embedded processor for unattended instrument management and data analysis. New and improved algorithms for determining scintillator gamma dose rates, total integrated dose, and nuclide identification will be introduced. The two detector elements were modeled with MCNP and validated experimentally. The results of the radiological testing shall be presented including energy resolution, throughput, dose response, and minimum detectable activities. The dose response has been evaluated in simulations and with measurements to ensure accurate response with respect to energy spectrum of the dose field and direction of the incident radiation. Spectroscopy evaluations, such as nuclide detection probability and false alarm rates, were performed and comparisons to existing algorithms shall also be presented. (authors)
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Reactive Molecular Dynamics Simulations of the Atomic Oxygen Impact on Epoxies with Different Chemistries
Atomic oxygen (AO) is one of the most abundant species present in the lower earth orbit and is responsible for the aggressive degradation of polymers used in spacecraft structures. In this investigation, we use ReaxFF reactive force field molecular dynamics simulations to evaluate the disintegration of several different thermosetting epoxy polymers subjected to hypervelocity AO impact. Our simulations indicate that epoxy with aromatic curative displays higher resistance to the AO impact because of its stable benzene functionality. Decreased cross-linking density and increased simulation temperature both lead to faster disintegration of the polymer. Our simulation results indicate that ReaxFF force field simulations can be a useful tool to evaluate the response of various thermosetting epoxies to AO impact and identify promising candidate materials for spacecraft applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A 2.5D Computational Method to Simulate Cylindrical Fluidized Beds
In this paper, the limitations of axisymmetric and Cartesian two-dimensional (2D) simulations of cylindrical gas-solid fluidized beds are discussed. A new method has been proposed to carry out pseudo-two-dimensional (2.5D) simulations of a cylindrical fluidized bed by appropriately combining computational domains of Cartesian 2D and axisymmetric simulations. The proposed method was implemented in the open-source code MFIX and applied to the simulation of a lab-scale bubbling fluidized bed with necessary sensitivity study. After a careful grid study to ensure the numerical results are grid independent, detailed comparisons of the flow hydrodynamics were presented against axisymmetric and Cartesian 2D simulations. Furthermore, the 2.5D simulation results have been compared to the three-dimensional (3D) simulation for evaluation. This new approach yields better agreement with the 3D simulation results than with axisymmetric and Cartesian 2D simulations.
Li, Tingwen↗